Roles of TCS LDAP

Similar Questions

• application role custom (added ldap group) still no connection possible

  Hello
  I created a BIConsumer_USA (using Oracle Enterprise Manager) role for consumers to report BI from the United States, who should have access only
  dashboards US (consisting of BI publisher reports). I added this new application role BIConsumer_USA
  the application role existing BIConsumer (so the permissions are defined) as well as the usersUSA of the LDAP group.
  However, even after doing all this. I can not connect with users who belong to this group and who have the role of BI_Consumer_USA.
  Why is this?

  Given that the LDAP protocol is an IBM Tivoli we should able to use OpenLDAP instead of OVD LDAP provider in the logic of the Web.

• Error: The user is not synchronized in the LDAP directory.

  Hello

  I have observed that the users imported via the load utility to bulk IOM does not get incorporated into the OID (as the configuration via LDAPSync). Additionally, when you try to change a users in the identity Console give me the following error message:

  IAM-2050243: process Orchestration with id 5436, failed with the IAM-3010059 error message: change failed because the user TSEMMENS is not synchronized with the LDAP directory.

  I need a manual task for this? or is it a mistake?

  Thank you

  Hello

  Because users are not present OID, so during change it will throw the error.

  Try running the following Scheduler:

  LDAPSync Post allow provision users to LDAP
  

  E.7 Provisioning of users and roles created before enabling the LDAP LDAP synchronization

  If you create users and roles in Oracle Identity Manager deployment without LDAP synchronization and decide later activate the LDAP synchronization, then the users and roles created prior to activation of the LDAP synchronization must be synchronized with LDAP after activation. The commissioning of the users, roles, the role memberships and hierarchy, role of LDAP is obtained by these regular positions predefined LDAP:

  • LDAPSync Post allow provision users to LDAP
  • LDAPSync Post Enable provision roles to LDAP
  • LDAPSync Post Enable provision of roles for LDAP group memberships
  • LDAPSync Post Select available role hierarchy in LDAP

  Allowing a LDAP synchronization in Oracle Identity Manager - 11g Release 2 (11.1.2.2.0)

  We'll see if it creates the entry in OID.

  ~ J

• That in order to run the reconciliation of ldap and the synchronization to run?

  Hello

  I'm running on IOM 11 GR 2 PS1.  I am migrating users, admin roles and application of IOM 10 g to 11 GR 2 IOM roles.

  I am trying to simulate zero-day and I have completed the following tasks:

  1. run the "LDAP role hierarchy full reconciliation."

  Validation: all OID groups appear in the table of the upg.

  2 turn off the LDAP synchronization (I chose to activate LDAP synchronization during the installation of the IOM)

  Validation: create a new user and no account of the OID is created in OID.

  3. run the first scheduled custom task to create users and admin roles using the data of the implementation of the 10 g IOM.

  Validation: the users are created in the table of the usr.  Got about 5000 documents in.

  4 re - enable LDAP synchronization

  Validation: create a new user and a matching OID account is created in the OID.

  3A ran all reconciliations LDAPSync 4 (LDAPSync, hierarchy, select post available role of Post allow provision to LDAP users, Post select roles available to LDAP, Post Select available roles for LDAP, LDAP group memberships).

  Validation: select usr_ldap_dn in usr;  This property returns the value of the user dn in OID.

  5 ran all reconciliations remaining LDAP (with the exception of the deletion).  The number of records in the table of the usr goes to 7000 records.  Updated full reconciliation and create LDAP users created a few new records by IOM.  It seems like if it was a reconciliation of the source of confidence with the OID being the source of confidence.  It's not good for my use case.  I don't want users of OID to create in the IOM.

  I have 1 not more to finish which is to run a second custom scheduled task to add application roles for users with distributed LDAP synchronization.

  I'm doing this right?  How can I reconcile an OID without creating users in IOM with users of

  OID?

  I'm so lost...

  Thank you

  Khanh

  In what order should

  Hi Khanh,

  [Is not good for my use case.  [I don't want users of OID to create in the IOM]

  Do not forget this Ldap synchronization that we use when we want that all users of OID - EEM to be synchronized. Otherwise, you should have disabled the Ldap synchronization and used OID 11 g connector.

  So if you want to link users to IOM help process form/resouce OID, then its essential to use OID 11 g connector.

  ~ J

• Error in the role assignment

  Hi all
  
  I had created a strategy to access the OIM 11 g to work for a final user role. Also, I've created a membership rule in design console to verify that a custom page attribute create a user called UserRole had the value of the end user. I applied this rule as membership rule in the role of the end user so that the role be assigned self if I chose EndUser in UserRole attribute then create user phase. Also, I assigned the access policy that I created for this role in the access policies tab. After this, whenever I created the user with attribute UserRole EndUser role was automatically assigned to the user as well as the access policy is invoked and it worked great.
  
  Then I activated the LDAP sync today and to check it worked I have disabled access policy by changing the role assignment he had to another role temporarily so that he would not get invoked. After awhile, I started the old role in the access policy so that it works as before. But now the access policy has stopped working. Also the user role is not automatically assigned. And on top of that, I'm still not able to assign the role to any user I create later manually. The error I get is:
  

  An error occurred. The corresponding error code is 0080062 IAM

  can someone please guide me to get the solution for this unacceptable mistake? I don't understand how I am unable to assign roles as well. If at all there is problem with the access policy so only he should have stopped working. But being not not able to manually assign roles is simply amazing. Help, please.
  
  Thank you
  $id

  Hey $id,

  Please run these scheduled tasks:

  LDAPSync Post allow provision users to LDAP

  LDAPSync Post Enable provision roles to LDAP

  LDAPSync Post Enable provision of roles for LDAP group memberships

  LDAPSync Post Select available role hierarchy in LDAP

  If you follow these scheduled tasks predefined LDAP above, all users of provisioning, roles and role memberships, as well as hierarchy, role of LDAP is reached.

  Please let me know if you have any doubt.

  I hope this helps.
  Leoncio Thiago.

• Session variable

  Hello
  
  I want to know is a way of the set/get on oracle sqlplus or vb.net session variable? How?
  
  Thank you!
  
  Francis SZE

  Devotee wrote:
  Could you please give me more detail (s) how do I set and get the session on the oracle sqlplus or vb.net database variable?

  Why do you want a session variable and what is the purpose?

  A PL/SQL, once loaded, package remains loaded for the duration of the session (except manual reset). This allows to use a package for the encapsulation of global session variables. For example

  create or replace package SessionVariable as
    sessionID number;
    sessionState varchar2(20) := 'INIT';
    --// etc.
  end;
  

  From an external client, you simply use an anonymous PL/SQL block to set and read these variables via bind variable:

  --// set a state variable
  begin
    SessionVariable.sessionID := :1;
  end;
  
  --// read state variables
  begin
    :1 := SessionVariable.sessionID;
    :2 := SessionVariable.sessionState;
  end;
  

  Another method, as illustrated by Alex, uses an Oracle context aka Namespace. There are 2 types of namespaces. Approved and unapproved.

  Alex shows no reliable context. The customer can create and set session variables.

  A context of trust is one where the procedure that is assigned to acts of context as an autoexec.bat or + .bash_profile script - where this script creates and sets session variables. For example, the procedure could connect to an LDAP server using the existing user identification information, read an additional security and role of the LDAP attribute values and create session for these variables.

  This context confidence means that variables of session (for this context) is reliable because she was not defined by the client (running wild). This customer ran on the contrary this procedure and this procedure containing a code of confidence created the required session variables and assign values (which cannot trust) to these variables.

  A context of trust is often used to implement VPDB (virtual private databases) in Oracle.

  One last comment. The PL/SQL package approach works very well (as a namespace not approved), but does not support the use of SQL. You cannot use static package from SQL variables (unless SQL is inside PL/SQL).

  An appropriate context can be used in PL/SQL and SQL.

• Change of subject does not work with basic authentication or client-cert

  Hello
  
  Following the [change authenticated users role after the LDAP authentication | http://forums.oracle.com/forums/thread.jspa?messageID=3590712] thread, I have successfully done a simple testcase web application.
  It works with forms authentication from, but if I change the method of "basic" or "client-cert", it does not work.
  It seems that the subject is reset on each request, lose roles added programmatically.
  
  Could someone explain this behavior? How can I keep the information between applications? I need to use the client CERT authentication. based in my web application.
  
  Thanks in advance,
  
  Tatiana.
  
  Published by: Tatiana on August 4, 2009 12:51

  Hello

  What happens if you hurt the object in the session and use it from there?

  Frank

• LDAP role create and update reconciliation

  I have IOM 11.1.2.2 and OID 11.1.1.6 configured with ldap synch enabled. It works very well as expected.

  I have a question about the scheduled task LDAP create role and the reconciliation of the update as described in http://docs.oracle.com/cd/E37115_01/admin.1112/e27149/scheduler.htm#OMADM2773

  -LDAP connector to be installed for this planned work? Or the existing ldap synchronization between IOM and the OID will suffice?

  Jobs need not install the connector. These jobs are coming as part of the installation of IOM with LDAP synchronization.

  For more information please open and read in the link below:

  http://docs.Oracle.com/CD/E40329_01/dev.1112/e27150/oimarchtcture.htm#OMDEV4951

  2.1.4.4.1 integration with LDAP configuration

  Kind regards

  Saurabh

• How to map the role defined in JDeveloper for LDAP

  Hello

  I'm trying to figure out how to map the Illustrazione roles when the BPM process design and the LDAP protocol.

  I have deployed on the soa server processes, I can see the ear on the page of the Console.

  I did the following:

  1. connect to the Oracle BPM workspace (http://localhost: 8001/bpm/workspace /) as the user WebLogic.

  2. click on the administration link.

  3. click on roles in the Administration Panel of the areas on the left, to the list of all different roles across all deployment processes.

  but I do not see my deployment process.

  Do you know why this is? In my approach I just added my roles for the corridor. Is this correct? Why can't I see not all roles deployed?

  Well, if you do not want to deploy physically, you can build your project. However, you may encounter errors during deployment of the projects built with success.

  I guess that you have a development/test environment where you can check if your application is deployed.

  Last resort - player process. For a process, really, it is deployed on a special partition on the soa infrastructure and should play not accessible by end users.

  See you soon,.

  Anatoli

• Mapping of the external LDAP user with the role of the Complutense University of MADRID

  Hello WebCenter content masters,
  
  I'm having trouble mapping a group LDAP to the role of the Complutense University of MADRID.
  Let me explain the situation.
  
  I have an external LDAP (Apache DS) with two groups (groupofuniquenames), 'Administrators' and 'Test' and two users 'ldap_admin' and 'ldap_user '. ldap_admin is a uniqueMember administrators and the ldap_test a test uniqueMember.
  
  At the University Complutense of MADRID, I created a custom role 'Test' with privileges "RWD" group 'Public '.
  
  I guess that the external LDAP has been configured successfully as an LDAP authenticator provider - myrealm settings tab, since I can see groups and external LDAP users, and they can connect the DCU with their user id and password.
  
  However, ldap_user is unable to perform the check, and on their profile page, the role is "invited, authenticated."
  And when I pass ldap_user in the test group to the Administrators group, the role is then "invited, authenticated, admin, sysmanager, refineryadmin, rmaadmin, pcmadmin, ermadmin.
  It seems that the Administrators group is mapped correctly, but not the group test.
  
  I try to apply the advice given in these two threads:
  External LDAP user has only priviledge research at the Complutense University of MADRID
  Unable to map external users to roles in content Webcenter 11 g
  
  I have created a 'externalLdapMap' identification card, completed the provider.hda file and put the map "Test, Test". I also tried with "Test, contributor" that I was not sure about the first mapping.
  Whatever it is, after restarting the server of the University Complutense of MADRID, I'm still not able to grant the privilege of writing for a user to the Administrators group.
  
  I missed something in the process?
  Thank you for your attention and of course any help would be greatly appreciated.
  L.

  Hello

  I think that you have enabled the LDAP authenticator credits and that this error will go up.

  You must create an OpenLDAPAuthenticator and do the same settings with flag set up and then test the scenario.

  Thank you
  Srinath

• LDAP user to application role mapping

  Hi all
  
  OBIEE 11.1.1.5
  
  I have a table with the user name ldap and role. I also configured external LDAP server to the RPD. Users can connect to the portal.
  
  Can someone guide me, how to ensure that when the connection of the user to OBIEE automatically by the role table is retrieved and mapped with the application role created?
  
  Or, in simple terms,
  
  How can I assign an external ldap user to map to the application role? One by one? or Via the table as shown above?
  
  Can anyone help? All documents are not giving this simple image for me.
  
  It was easy in 10g, 11g is it rocket science so that my company can lose hope to go ahead with 11g?

  Hi Hari,

  These can be useful for you

  http://gerardnico.com/wiki/dat/OBIEE/security_11g
  https://blogs.Oracle.com/robreynolds/entry/security_in_obiee_11g_part_1

• is there data on the security role that is stored in the LDAP tree

  I see individuals and groups in LDAP, and it uses the wlsMemberOf and memberURL attributes to meet a person and a group. But what is how weblogic LDAP using to meet the roles and groups? any input or an attribute? How to use XACMLRole? What is the role? What are the policies of XACMLRole?

  You observation is correct.

  Role mapping is handled internally by WLS.
  The only way we can the political map n roles is through the console

  http://WebLogic-wonders.com/WebLogic/2010/06/04/how-to-modify-WebLogic-default-roles-and-policies/

  The changes are kept in the built-in Ldap server.

  Thank you
  Faisal

• Change the role of the user once authenticated LDAP authentication

  Hi forum,
  
  I do know that if it is possible, I have not found a solution so far
  
  I have a simple web application with LDAP authentication. We would like to use LDAP for authentication and store the information of user roles in the database. After authentication, LDAP assigns the role of "guest" to the user and the home page (the only page available for this role) is displayed.
  
  In this home page, the user must select a profile (the same user can have multiple profiles) in a list retrieved from the database. The profile of each user has an associated role. After selection, we want to change the role of the user "guest" to the role associated with the selected profile.
  
  I don't think that implementation of a custom plug-in fits my needs because the role assignment requires the participation of the user.
  
  Any suggestions?
  
  Thanks in advance,
  
  Tatiana.

  Hello

  Well, the problem is that you need to change the subject of the user authenticated, who's a JAAS thing to do. The only way this can work is indeed use a custom LoginModule and then access the user object to add a security principal that represents the role you want to add.

  Frank

• LDAP question

  We strive to get humhum and LDAP to work within our environment AD.  Our current environment is a mixed mode domain and forest to windows 2008r2, and windows 2012r2.

  Basically what we try to do, is have our users access to this Web page for training by using their network name and password.

  The issue we see is

  Status: error! (Message: 0 x 50 (other (e.g. implementation specific) error; 80090304: LdapErr: IDDM-0C0903A8, comment: AcceptSecurityContext error, 20ee data, v1db1): CN = LDAP, OR = Undefined users, OU = ouUSS-departments, DC =-, DC = local)

  the LDAP account is a domain administrator with all the rights on the server

  The LDAP protocol is on a member server named netmon uses port 389

  We use a named ldap1 with the following account named ldap LDAP instance.

  LDAP [netmon. - .local:389]

  CN = ldap1, dc =, dc = local-

  CN = container lost and found

  CN = ntds quotas

  CN = roles

  I added the cn = users container and with the user cn = ldap, msds-useraccountdisabled = false

  By reading some articles and Watch youtube, States that I have to export my domain controller information and import it to this place, but when I do it will not import

  using ldp can bind with the local account, but still not get all users to fill out

  RES = ldap_simple_bind_s (ld, ' CN = ldap, CN = users, CN = ldap1, DC =-, DC = local ", ); / / v.3
  Authenticated as: ' CN = ldap, CN = users, CN = ldap1, DC =-, DC = local "."

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• LDAP configuration with vFoglight 6.5

  Im trying to configure LDAP services within our domain for use with vFoglight. My goal is to have a group operator and administrator group that uses our AD accounts instead of "local." I'm not sure if I have properly configure all LDAP settings. Can someone check my settings and let me know where can be the problem?

  Also under Administration > users & security management > user management > groups; The LDAP group button is grayed out. If the LDAP settings are correct this button will become live?

  Here are our settings:
  Account is anonymous. fake Unique name of the service account. Contoso . com\svc_acct password | **** LDAP query prefix | CN= Query LDAP suffix. OU = site, DC = corp, DC = contoso, DC = com The scopes to search for groups | UO = site, DC = corp, DC = contoso, DC = com The second space of group names. UO = site, DC = corp, DC = contoso, DC = com The third namespace group | "in white" The LDAP context for the user's search. UO = site, DC = corp, DC = contoso, DC = com Role attribute ID | name Is Role DN attribute | fake ID of user alias attribute | sAMAccountName ID of the attribute to search for groups | members Match the DN of the user. true JAAS LoginModule name | Security for JACQUES com.quest.nitro.service.security.auth.spi.NitroExtendedLdapLoginModule name field. FGL-web-console Group ID parent attribute | memberOf Attribute of the group to search for nested groups. members Maximum level of group nesting. 15 LDAP search time (milliseconds). 10 000 mode of research group | direct

  I hope that your problem has been resolved but support. You can also check our free training site: http://svgtraining.quest.com/ which has a video on the LDAP configuration.