acquisition and video recording of the camera

Similar Questions

• BlackBerry Smartphones Just accepts updates my Blackberry Desktop and all THE Photo and video recorded on the Media Manager went

  Hello! I just accepted updates my Blackberry Desktop includes all Blackberry Desktop manager treats me like a new. And freaked out as all THE Photo and video recorded on the old Media Manager Media Manager are worth more than 3 years gone-Its photos and videos that I have stored on the Blackberry Desktop that existed before the update

  Really freaked out because these photos are irrepalcable would appreciate advice thanks

  Hello

  Have you checked to see if the pictures are found in your Documents folder by browsing until then on your computer system?

  What version of the Desktop software update you? Select the [?] is the top right and select "on BlackBerry Desktop Software. Version 7.1.0. ? or 7.0.0. ? or 6.1.0. ?

• Change the video recording in the camera mode?

  Just bought an iPad 9.7 inch Pro. I can't believe that they did not provide a way to switch between video and recording slo - mo resolutions and cadences of the camera app. I can go slipping between video and Slo - Mo and the amount of time, but I can't switch between shooting 4K and 1080 p video, or between 30 FPS and 60 fps 1080 p or slo - mo 1080 p 120 fps and 720 p 240 frames per second. In fact, I have to jump out of settings > Photos & camera to change DEFAULT record for these features of the camera modes? Please tell me I'm missing something.

  We are all of the users like you

  Please send your comments if you wish to http://www.apple.com/feedback

• video recording on the camera application function does not

  My app windows photo 8 shows the video recording features, however nothing happens when I try to use it. I had no chance in the troubleshooting update and windows updates to fix this problem. How can I get the video camera recording function to work? Currently when I select the video mode, it absolutely nothing happens.

  Hello

  Are you able to take pictures using photo app?

  It seems that there is something wrong with the camera application.

  So, I suggest you follow these methods and check.

  Method 1:

  Run applications troubleshooting

  Download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2:

  I suggest you follow the steps in the article. Here is the link for your reference.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  For reference: app photo and webcams: FAQ

  http://Windows.Microsoft.com/en-in/Windows-8/camera-app-FAQ

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Video recorded with digital camera includes the text

  All the videos that I download from camera screen "Current Frame", "CPU load", "Output size" and "Size of entry". Help me get rid of it?

  After recording a video from my digital camera and then download it, while I watch the video, there are words anywhere in the entire video.

  Saying:

  The current image: 27 (* just a bunch of numbers, running up to and upwards and upwards)
  CPU load: 26% (* any percentage, running up to and upwards and upwards)
  Entrance Dimensions: 320 x 240
  Format: 320 x 240

  -What this means and how do I get rid of him? I can't even burn these videos on a DVD without him appearing on the disc.

  Is the camera, with that I use to download videos my camera digital; Sony Cyber-Shot. Model DSC-S730

  Hello
   
  1. have you had this problem since the first time you connect your Sony Cyber-Shot. Model DSC-S730 to Windows 7?
  2. on what application you are trying to watch the recorded video?
   
  Issue seems to be with the camera.
   
  Contact Sony because I think they are the best people to offer assistance in this regard.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Can not view videos and pictures after downloading the camera

  recently, I downloaded my photos from the camera and vidioes to my Office I can see my pictures, but I can't watch my vidioes what I can do to fix this used

  Hello
  • What is the format of your video file?
  • Which media player you use to play video files?
  • Are you will be able to play other video files?

  If you use windows media player, this problem can be caused by incompatible codecs. I suggest that you Remove/uninstall all third party installed packs Codec, players or saving video programs.

   
  Codecs, frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

• Data acquisition and video acquisition

  Hi all

  I am a new user of Labview. I am trying to build a VI that synchronize acquisition DAQ voltage of one or more channels to an AVI video acquisition (IMAQ) (including a bayer encoding process), recorderd by a digital camera.

  I built this VI which I attach.

  The problem I have right now is that I am able to do a video and a signal, but the duration of the video is always different from the signal, I can read the time in the file LVM vector.

  Could you please tell me how I can solve this problem?

  Perhaps this question may seem easy, but. As a new user, I know very well how to use Labview in the most effective way.

  Thank you all for your time.

  Emanuele

  Thank you very much, I am modifying the program, but I do not understand how you linked the son two error, I can't find the box you put just before the other 'error' box, please let me know hat it's and what is used.

  Thank you very much four alos your patience.

  Emanuele

• Windows 8 can't open video recorded on the Canon FS300

  I recorded a video on my Canon FS300 and when I try to open the file I get this message: is unable to play, this element has been encoded in a format that is not supported by your version of Windows

  The video is on an SD card and when I discover the content of the map it shows as a MOD file.
  I would be grateful to anyone who helps advise how I can open the file. Thank you

  Hi Carolyn,

  1. the application or program that you use to open the file?

  2. are you able to play other video files on the computer?

  3 is the issue limited to the video file on the SD card?

  Most JVC Camcorders and video cameras record video clips with the MOD file extension. However, the files actually use much more common MPEG2 and MPEG-1 compression technology. By default, Windows Media Player cannot play a JVC Camcorder MOD files.

  Windows Media Player does not support. Files MOD. see the following article for confirmation.

  Information on the types of media files that Windows Media Player supports (applies to Windows Media Player 12): http://support.microsoft.com/kb/316992

  I suggest that rename you the extension is a mod in .mpg and check.

  I suggest you use your favorite search engine and the search for the program that converts files is a mod.

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Response with the State of the question and we will be happy to offer you our help.

• Built-in BD and video player on the Internet

  I recently got a KDL-32EX40B TV with BD and video Internet player. Although slow to start using N of Sony wireless adapter, it seemed to work OK once I've manually updated the firmware to version PKG4.081AAB (NetFlix wouldn't work at all before this update, and the feature of automatic update in the game told me that the 3 something version was later if no update was necessary).

  In fact, it worked OK until it didn't. Would come and bring some TV station was tuned to the TV, but when you press 'Home' or 'Internet Video', he would just stand there until a message informed me that he was turned on. Later another message saying that it has detected a USB wireless device. Then after awhile, I could press 'Home' or 'Internet Video' and he would take me to the home screen where finally the icons would appear. Pressing NetFlix slowly take me to NetFlix where I could choose something. When the show came (after the 'Connection', 'Control link speed,' messages 'Connection' and 'Reconnect'), the information bar on the top and on the bottom of the screen progress bar would not go far and after about 10 seconds the TV turns off and everything started again. 10 minutes full ten seconds of NetFlix.

  By trial and error, I discovered that this has happened when my wife left a DVD in the player integrated comics. Remove the DVD and restart the TV appears to work correctly. It was only yesterday, so let's see what's happening today or the next few days.

  It is a programming problem in the firmware for sure. It is also something that should be documented if necessary being the culprit. If not leave a DVD in player results in no video problem Internet more, I'll Growl but tolerate it. If the problem returns, I return all since I only got it for a little over a week.

  It has not been wired or wireless, but I find the question. I use a router D - Link DIR - 855 dual band 4 gigabit ports. It is not a dedicated media streamer or DLNA certified device. That shouldn't matter, but it could. I checked the advanced configuration of the router settings and found a box for ' Enable UPnP. It has not been verified, if I checked it, rebooted the router and the problem of Netflix to freezing and crashing while a DVD was still in the TV went off.

  Knowing not enough about what enabling UPnP, I can only say it seems to make a difference. If you discover in your labs that you can reproduce this problem, it might be interesting to note something on the routers in your FAQ. If you can't reproduce, then clearly it's black magic and I need to spend more time learning the secret incantations.

  With respect to the update of the firmware, it has been updated automatically, and he did as soon as I'm the wireless enabled in TV. But he upgraded to an older version that you have available for download. He had been in place for several days until I've manually updated, so it wasn't like I had not given the time. I also made sure the TV to search for updates before I flashed to via the key USB and TV told me I had the latest version already installed but it was clearly not the strength. Flashing the update firmware well and solved the problems I described in my first post.

  Thank you.

  Peter

• Problem reading video image from the camera IP Axis - confusion of variant data buffer.

  Hi there;

  I am writing a VI for an Axis IP camera.  He went to work, but I need to extract individual video stream images so I can overlay text using the functions of text IMAQ overlay.

  The thing is when I take a picture using the axis dll library (GetCurrentFrame), it returns a buffer size and a Variant representing the raster data.  The data is = 921 640 bytes representing a 40 byte header, and then the 640 x 480 x 3 raster data.  When I run the vi, I get a correct value for the size of the buffer (921 640) so I know it works.

  What don't understand me, it's the video image is placed in a buffer of type variant.   I don't quite know how to extract the raster data of the data type of "buffer" which is a type variant.  My apologies, I'm a bit ignorant in how to handle the types of "Variant".

  Does anyone have a suggestion?

  This is the VI

  Hi Peter,.

  Just to confirm, what IMAQdx version do you use?  You want to get the version 2010.3 since it is the latest version: http://joule.ni.com/nidu/cds/view/p/id/1641/lang/en

  The next issue would be that the Ethernet cameras discover is not necessary and that it is only used for GigE Vision cameras. The VI was named before IP camera support has been added and the name is unfortunately confusing now. In any case, the discovery of cameras takes place in the background and is automatic. The VI list must list your camera. It may be worth trying just to see if the camera appears in first MAX. Note that the IP camera must be installed on your local subnet, so it can be discovered.

  Regarding the examples, virtually none of the IMAQdx examples included in help-> find examples should work.

  Eric

• Unable to connect camcorder jvc everio Windows movie maker for video transfer of the camera

  bought the camera usb cord, bought the camera used without software

  John's response covers just about everything, but in a nutshell.

  The evario has its own file format.
  Use Explorer to drag - move the file from the camera to your drive.  Convert the video file into a wmv. import the given in MM and edit.

• Cannot copy large video files from the camera

  Tried to copy a too large video from my camera.  Message says 'current picture cannot be copied' when I looked up the answers in 'help' it says connect the camera using the (MSC) usb mass storage class, and then use windows Explorer to copy the image to computer.  Please help me understand this.  I have to download or update a driver to do this?  Should I buy something?  Please don't laugh, but I'm lost.  All those who take the time to give me some step by step instructions would be greatly appreciated.

  Transfer of files from digital camera fails

  Symptom 3:

  When you try to transfer a single large file from a USB PTP camera to local hard disk drive (HDD) using the scanner and Camera Wizard, the file transfer does not immediately, and you receive the following error message:

  Scanner and camera Assistant the current image have not can be copied.
  To copy this image, click "Try Again." To no longer deal, click "Cancel".

  If you click Retry, returns the error message.

  Problem 3 occurs because an error occurs in the scanner and Camera Wizard

  Resolution:
  You can connect the camera using USB Mass Storage Class (MSC) instead of PTP. Then, transfer large files using Windows Explorer.

  When you connect your camera, it can map device memory as a player external and it give a letter under 'Computer' OR it can be configured to do this in the configuration menu of the camera.  Once you have a drive letter assigned under 'Computer' for the camera, locate the drive in question for the file you want and copy to your computer to office/etc in the same way you would any other file.

• Photo Gallery Windows won't play videos downloaded from the camera

  After uploading photos and videos from my camera fixed pictures are okay, but videos will not play.

  Hi richardclipperton,

  (1) you get an error message?

  (2) if it works well before?

  Method 1: Let flow the fixit available at the link below and then check

  Windows Photo and slideshow problems

  http://support.Microsoft.com/GP/windows_photo_and_slideshow_diag/en-us?EntryPoint=lightbox

  Method 2: Download and install the software provided by the manufacturer of the device and then check if the problem persists.

  Method 3: Click on the link below for the Windows Photo gallery-supported file formats

  What image file formats are supported by the photo gallery?

  You can download and install the codec, check out the link below

  Codecs - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• Can I mark videos with metadata / the camera angle before creating a multiclip sequence?

  Very well. Apologies... with regard to the first, I'm afraid that I'm a great beginner "Multiclip" so can follow the stupid questions...

  I created sequences multiclip and here to mark the clips from each camera with the appropriate angle label before creating the multiclip sequence (for example tag all clips belong to the CAM A as 'Angle 1', tag all the clips belonging to cam B tag such as "Angle 2"etc.) ... If the generated sequences are created with all of the same clips / camera angle on a specified single track (for example all A cam clips on track 1, all B cam clips on track 2, etc.).

  Is this possible?

  For the moment, it seems to be generating sequences containing hundreds of separate beaches, one for each element, which is a bit of pain to play. All likelihood that I stuffed up some settings somewhere... I don't see the options for 'Assignment of the track' during timecode synchronization, which offers to assign the label of the camera or camera Angle, but for the life of me, I can't find where the actually tag my videos with these data.

  Thanks in advance

  Andy

  Ahhhh... You have enslaved timecode!  Lucky devil!  I'm afraid I have no life experience with this (projects only tutorial).

  This post might help you:

  https://forums.Adobe.com/thread/1871960

  He speaks award camera angle and label the camera in the metadata

• When I send an email from my iPad Air to the recipients not Apple and tech photos using the camera icon, the photos are received very extended, larger than the viewing page. What I am doing wrong?

  When I send an email from my iPad Air and attach a photo usping the camera icon, it is received on the devices not Apple very extended and unable to be read. What I am doing wrong?

  You're probably doing nothing wrong.

  One thing to try is after inserting that tap photo images and then change the size. If it works, you have my CCC friend to thank for calling your issue to my attention.

  Tap.

  

  Tap.

  

  Receipt by e-mail.