root.sh Script - clsssinit call failed (21)

Similar Questions

• root.sh script fail to run on OEL5.4

  Hi, I am trying to install a network infrastructure for a stand-alone server on Oracle Enterprise Linux 5.4. I have a problem when I run root.sh script by user root is not run successufly is the "error loading shared libraries" error please give any soluciton.
  
  Here is the run the root.sh script
  
  
  [root@ws1 OraGrid11gR2] #./root.sh
  Run the script root.sh from Oracle 11 g...
  
  The following environment variables are defined as:
  ORACLE_OWNER = grid
  ORACLE_HOME = / opt/grid/OraGrid11gR2
  
  Enter the full path of the local bin directory: [usr/local/bin]:
  Copying dbhome to usr...
  Copying oraenv to usr...
  Copying coraenv to usr...
  
  
  Creating/etc/oratab file...
  Entries will be added to the/etc/oratab file according to the needs of
  Assistant configuration database when a database is created
  Finished to turn the generic part of the root.sh script.
  Now root product-specific actions will be performed.
  2009-11-02 18:18:28: verification of superuser privileges
  2009-11-02 18:18:28: user has superuser privileges
  2009-11-02 18:18:28: analyzing the host name
  Using the configuration settings file: / opt/grid/OraGrid11gR2/src/install/crsconfig_params
  Create the trace directory
  /opt/grid/OraGrid11gR2/bin/ocrconfig.bin: error while loading shared libraries:/opt/grid/OraGrid11gR2/lib/libclntsh.so.11.1: cannot restore segment prot after LAN: permission denied
  Cannot create or upgrade OLR
  
  
  Please give any solution

  Give it a shot...

• Step 9 10 grille Installation Wizard - run root.sh script problem

  People,
  
  Hello. I want to install Oracle 11 g RAC 2 with 2 Virtual Machines (rac1 and rac2 which BONES are Oracle Linux 5.6)
  and according to the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
  
  The virtual disk for each virtual computer is 20 GB which is/dev/sda raw device (the partition/dev/sda1 is the same size).
  
  In order to install the grid Infrastructure, I add 5 disks in the first machine virtual rac1 and 10 GB for each hard drive.
  Then create 5 ASM disks respectively as a disk group. Let me describe them as follows:
  
  OS Phyysical file: C:\VM_RAC\sharerac\asmdisk1.vmdk (asmdisk2.vmdk asmdisk3.vmdk asmdisk4.vmdk asmdisk5.vmdk)
  The corresponding raw device: / dev/sdb (SDC sdd sde sdf)
  Corresponding partition: / dev/sdb1 (sdc1 sdd1, sde1 sdf1)
  Corresponding ASM drive: ASMDISK1 (ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5)
  
  When I run the installation of grid step 5 of 8, I select all 5 ASMDISK as ASM disk group in the wizard.
  Clusterware files are supposed to be stored in the ASM disk group.
  
  2 virtual rac1 and rac2 machines must use the same ASM disk group.
  Here, I do not do anything about ASM disk group in the second rac2 VM.
  
  By operating step install grille 9/10, run the root.sh script in 2 VMS rac1 and rac2. The root.sh script runs successfully in the first VM rac1. But when the root.sh script is executed in the second VM rac2, the error message appears as follows:
  
  "... ...
  ORA-15018: disk group cannot be created.
  ORA-15031: disc "ORCL:ASMDISK5" specification is no disks.
  ORA-15031: disc "ORCL:ASMDISK4" specification is no disks.
  ORA-15031: disc "ORCL:ASMDISK3" specification is no disks.
  ORA-15031: disc "ORCL:ASMDISK2" specification is no disks.
  ORA-15031: disc "ORCL:ASMDISK1" specification is no disks.
  ASM configuration failed.
  Not properly configure and start the ASM.
  Failure of the initial cluster configuration.
  ... ..."
  
  The error message above, it seems to connect the second rac2 VM with the ASM disk group created in rac1 so that the 2 virtual machines use the same set of disks for ASM.
  
  But I don't see anything on the ASM disk group in the second VM rac2 in tutorial
  http://appsdbaworkshop.blogspot.com/2011/10/11gr2-RAC-on-Linux-56-using-VMware.html.
  
  My question is:
  
  Include any folk how to fix ASM disks in the second rac2 VM when run the root.sh script in rac2 on step 9 of 10 in the Setup Wizard?
  
  Thank you.

  Hello

  Shared storage is the requirement of the CARS. Check if you have shared storage on all nodes.
  Run oracleasm listdisk on Node2 to see if he can see the same discs on node 1. Otherwise you follow this tutorial correctly

  See you soon

• All calls fail, same echo

  All received calls fail, all outbound calls fail. Have uninstalled/reinstalled. Are connected to other Skype accounts on the phone. It's an iPhone 5 with the latest iOS. This problem has been several months and I can't understand it. Could someone help? Thank you!

  Support cat has been able to help me! Enter Skype in a chat window and type /remotelogout and send the cat. I am now able to make calls and receive them.

• iPhone more outgoing 6s "Call Failed" error - network Airtel

  Recently, I brought the iPhone 6 s more than the United States and use it in India Airtel network. Since the last 1 week or two, I guess that since the time he had an update iOS 9.2.1 I started to have this "Call Failed" error whenever I tried to make outgoing calls. This happens all the time, but sometimes only. When it happens that he does not make outgoing calls for at least an hour or more. Ultimately some how outgoing calls start working again on its own sometimes and sometimes it starts to work 10 minutes after the function "reset all settings". I checked with Airtel carrier several times and they have confirmed that no problem with the network. I put Airtel myself another SIM card in the iPhone, and even this sim did not work during down time. At the same time, I put my sim card into another Android phone, and it works perfectly without a sim card. This leads me to believe that there is a problem with the hardware/software phone itself and not any problem with the carrier. Anyone had any permanent resolution of these intermittent failures?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  Restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  If these steps do not work, contact Apple and ask for help. Maybe it's a hardware problem.

  https://www.Apple.com/support/iPhone/contact/

• I have a problem in my iPhone 5 s while I call someone when on-call time at 1 hour of the call is disconnected and say call failed can help you me in this problem.

  I have a problem in my iPhone 5 s while I call someone when on-call time at 1 hour of the call is disconnected and say call failed can help you me in this problem.

  What iOS version you are running. I've heard of it, but I heard no talk for a long time... You can update to iOS.

• remote procedure call fail error fo vista SP2 printer installation

  I'm trying to reinstall my printer drivers and the HP software. I get the Windows Installer is not available. I have looked up lots of info on this and have tried many things but still seem to have a problem. This last time, I got the error message "the remote procedure call failed."  In services, the State of the PRC is started with Autostart upward, the RPC Locator is manual start. It is very annoying, because I can not use the HP printer. I disabled the AV and anti-spyware installation. Nothing seems to help

  Hello

  It sounds more like a problem with the installer for Windows rather than what it is with the printer itself.
  Have you tried to install other programs or equipment since the first see this message?
  If please see this thread and try again after the listed troubleshooting steps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-1601-Windows-Installer-is-not-accessible/08dce679-496d-43f4-A4B5-bb467800bb90

• intermittent connection problem: 'the user profile Service service has no logon. The remote procedure call failed and did not execute. »

  Hello, I'm having intermittent problems with logging in my Windows 7 computer.

  Often after reboot due to applications of Windows Update or any simply restart after the holidays, I have the following message on trying to connect:

  "The service user profile Service has no logon. The remote procedure call failed and did not execute. "

  When I click 'OK', the machine disconnects and try to restart.  This can occur 2 to 5 times before _works_ .  But sometimes it happens at all.  And sometimes he _partially_ connects, but my "reminder" and the "Sidebar Gadgets' not loading not correctly and I get a different RPC error - for example, I lived once a message RPC over Skype cannot work because the remote procedure call failed.

  I'm fairly certain that it is different from the frequently reported issue 'profile of corruption', which was experienced by others.  This problem manifests itself as 'the user profile Service does not log. The user profile could not be loaded "and is reported as a blocking problem consistently reproducible which is set by the 'fixing' of the profile.

  However, the issue I feel is clearly related to an RPC problem is intermittent and not consistent - maybe one of my devices is not reset properly?  Where I can look in the logs of Windows, to provide relevant information on this subject?

  Because my computer was still under warranty, I have raised the issue of Dell and they removed the damaged system file (user account) last week.

  I hope that this will finally fix the problem (previously the error message disappear and reappear after a few weeks later.)  I'll give it a few more weeks to be sure.

• The remote procedure call failed and did not execute

  whenever I put up-to-date Windows 7 freezes my new laptop and the computer ends by does not. Whenever I try to open my computer, documents, control panel and look for the following error message if poster to the remote procedure call failed and did not execute

  Hi aaabbbcccdddeeefffggg,

  Try the following steps:

  Type services in the start menu search box.

  In Services, scroll down to "Remote Procedure Call", and make sure that the status is "started."

  and set to automatic.

  The second 'RPC Locator' must be set to "manual".

  If the problem persists, as a workaround, you can perform online scan on your computer and check if the error message is caused due to malware or viruses.

  Now visit the link provided below for analysis online on your computer.
  http://OneCare.live.com/site/en-us/default.htm

  Later, try to install the updates and check.

  Aziz Nadeem - Microsoft Support

• Receive "remote procedure call failed and did not execute" on several files or folders

  I get this error message when you try to open all folders ".  That is to say - 'profile by default', default, computer, administrator and three records under my name.  Also when I try to open the Control Panel, I get...: {26EE0668-A00A-44D7-9371-BEB064C98683} \0 "remote procedure call failed and did not run".

  This leaves me no way to even check the status of all.  Does anyone know why I get this message? And more important still, how can I solve this problem?

  I guess maybe I should say that I have not tried to restart my PC.  I will try that next. But, even if the issues go away, I would really like to hear what caused it.

  Thank you

  Barb Morris

  For memory than usually Service error RPC does not work, but it should always be running and takes an extra effort to stop it if something went haywire somewhere.

  If the Service or the system is not afflicted in other cases restart is a good first move.

  Your mistake could have resembled these examples from my notes:

  

  

• "search query: = services the remote procedure call failed and did not run".

  My computer crashed two days ago and I'm finally home, but whenever I try to open a window of any folder I keep refusing. In particular the main computer folder. One of the error messages I got is the following:

  search query: = services the remote procedure call failed and did not run

  Followed by this one:

  The remote procedure call failed and did not execute.

  I opened the Task Manager and tried to access the services from there, but whenever I do, the Task Manager window freezes.

  How can I fix it, my computer is so slow running and does hardly anything and guard with all freezing orders that I try.

  Hello

  This error generally, if the system is infected with Virus and malware or system files are corrupt.

  Please, try the methods below and check if the problem persists.

  SFC scanner.

  You can read the following Microsoft article to repair corrupted using SFC tool files. Use the System File Checker tool to repair missing or corrupted system files

  Reference: http://support.Microsoft.com/kb/929833/en-us

  If the problem persists, try a run Microsoft Safety Scanner.

  http://definitionupdates.Microsoft.com/download/definitionupdates/safetyscanner/amd64/msert.exe

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Do try the suggestions above and let us know the results.

• "The remote procedure call failed and did not execute." Tried many things, still does not work

  Hello, whenever I try to open a file, the message "the remote procedure call failed and did not execute" appears. I checked that "Remote Procedure Call" began and is on automatic, as well as the RPC Locator is the manual value. I also ran a full system scan of my Norton Antivirus, which picked up nothing.  Can someone please?

  Hello

  You can try to change RPC Locator auto and see if that fixes the problem?

  I recommend that you only perform a scan with the auditor of the filesystem, which will scan your system for missing/corrupted or damaged files and will try to correct them.

  How to run the System File Checker

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Also, you can run the check disk to find bad sectors that may be present on your system.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Thank you

  Legaede

• Not able to connect to Windows 7-"the remote procedure call failed."

  Hello

  Windows never lets an opportunity to prevent the user. I have problems on my lappy staff & problem appeared all of a sudden.

  When I got the system starts, it of not connection & throws the error message "the remote procedure call failed." What ever I do it is not the same error.

  I tried logging in safe mode but is not connect in SafeMode survey the same error.

  Tried to restore to the last successful boot. Same mistake.

  Really frustrating.

  Looks like only option I have is to format the lappy however I have a lot of data in C:\ which are not saved.

  Any help will be much appreciated.

  Kind regards

  Vigni

  I have a lot of data in C:\ which are not saved.

  Unfortunately, it seems that you belong to the large class of PC users who choose not to back up important data, until disaster strikes. Your data is not lost, but the recovery is much more painful than to use an external backup drive. Here are a few options:

  • If it is a desktop PC: connect the hard drive to some other desktop PC, then recover your data.
  • If it is a laptop: remove the hard drive, then put it in a box for disk 2.5 "USB. You can now connect this case for some other PC and recover your data.
  • Start the computer with a bootable Ubuntu CD and its graphic interface allows you to save your files on an external storage device.

  When you are finished, you get a HDD 2.5 "USB and use it for your regular backups (e.g. weekly). You can also store an image of your new installation, you save the trouble of the reconstruction of Windows where you have another accident.

• When you try to log on, get error - "the system event notification service has no logon. the remote procedure call failed and did not execute. »

  My netbook will not open a session because it can not find a certain file. She won't tell me the file. and when I try to go to safe mode it freezes... is there anyway I can just read another account another point? the message I get is "the system event notification service does not log. the remote procedure call failed and did not execute. "tips anyone? I care is no longer the files it contains. If I could wipe it off somehow to factory settings then would be too cool. his windows 7 starter edition

  
  Original title: hp netbook to log issue

  You have two options:

  • Perform a factory restore. Check the homepage of the manufacturer for instructions.
  • Start the computer with your Windows XP installation CD, and then follow the prompts. You will have to find the different drivers to match your hardware, for example a driver for SATA hard drive.

• Call failed blackBerry Smartphones

  Call failed whenever I tried to call

  You have a signal strong enough on your phone?  It could also be a problem with your network operator.  You must call your operator and explain your situation to them.  Without knowing where exactly are you and what are your environments, it is difficult to say what could be the problem.

  I hope that helps you.