Rosetta Stone total v4 works with no error message.

Similar Questions

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• When I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work.

  Original title: installation problem windows

  I recently had to reinstall windows for my pc that my HARD drive is dead and when I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work. Ive phone microsoft and they say, I have to buy a basic disk and then upgrade with the disk that has always worked for me? any suggestions?

  License upgrade and the key that's exactly right, used to upgrade a previous version (Vista, XP) for the version shown on the license (7).

  In order to use this key, you need to pre-install your o/s original eligible before moving to 7.

• I'm so fed up with the error message that adobe flash broke down.

  I'm so fed up with the error message that adobe flash plugin has crashed. You got two years, in order to solve this problem, and all your proposed solutions do not work. I see no alternative but to return to Internet Explorer. It's so frustrating when I check my emails and click on a link to get the same message over and over again. Why did this problem occurs only with Firefox? It is not the case with Internet Explorer and it is not the case with Google Chrome. Otherwise, Mozilla Firefox is great.

  This from Halofromsue copied here:

  Well as I said in my last post, yesterday I disabled Shockwave in Plugins. However, as you know, you need shockwave and flash for most things... so I went back and set it to say "ASK to ACTIVATE" so when a web page loads and he needs, he will ask, and then I will either say 'Yes' or ' ' and that seems to work. So far, after three hours, it has collapsed and shockwave/flash all work fine when she needs.

  Me: it works!

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Carpet * a DVD-Ram UJ - 841S comes with several error messages

  My laptop is relatively new, I've been burning some video files in DVD - RW and all of a sudden my DVD drive has stopped working. It came with several error messages format "failed due to damage media", "format failed due to general failure" and "the inserted disc is READ only".

  I also can't rip music discs.

  Can you see ODD listed in Device Manager, and if so what is the exact status it?

  Sorry, but we discus on ODD, but nobody knows what model of laptop you have and what is the history of this problem. Is replaced the drive? Why are you sure that you are using compatible with your laptop ODD.

  Please more information!

• Satellite L300D - recovery disk stops with an error message

  Hello

  I don't read a lot of the other post, but foung no response...

  My problem:
  I bought a L300D Vista 1Y there are no included recovery disks, so I made the recovery disc. Now, we wanted to reinstall Vista, so I tried the recovery disk, but after 15 minutes, it failed with an error message:

  After successfully in 3 partitions of partitioning and formatting them the ImageX tool starts to extract VISTA

  After about 57% C:eindows\winsxs\x86_microsoft-windows-ehome-ehcird_31...35.6.0.6000.16663_...\ehcir.ird [removeExtract ToFileByStruct WIMcopyFileEx failed]

  Retry...
  [error 1117]

  What happenes about 5 times with similar messages (but other numbers), til message
  The request could not be performed because of an i/o error

  ERROR: ImageX could not to VISTA Lawrence drive HARD C: 2 V: HDD

  Press a key...

  Aftre reading the threads, I ordered an official recovery (35 Euro!) since the Office of service Toshiba disc, but I got the same errors and messages...

  Any ideas what I should do now?

  Thank you!!

  PS I never had these problems with my other laptops...

  Hello

  My friend who s a long story.

  It's not easy to say what the reason is for this, but to me it sounds like that there is something wrong with the HARD drive. In your case I would format the HARD drive before launching the recovery disc. You can do this with a Microsoft disk to format the whole HARD drive. After that try the recovery disk again.

  If it doesn't work, you should check the HARD drive with a special HARD drive diagnostic tool like Drive Fitness Test. use Google to find it, it s freeware and takes only a few minutes.

  Welcome them

• We get a blue screen with no error message when the user arrives in the morning... but not every day.

  Have a user who was the bluescreen with no error message when she arrives in the morning. This doesn't always happen.  But when it does, it must do a hard boot of his computer. It runs XP SP3, and it is on a domain. Another user reports what is happening also, but not as often.

  Yet once, it is not consistent where it happens every working day. It's maybe 1 or 2 days a week, if that. Hibernation is disabled and power options are set to never turn off.
  If this is not enough information, I will be happy to provide more if necessary. Any contributions to this issue would be appreciated.
  Thank you

  This may apply . But this message does not resemble a BSOD / crash

• Unable to play the Facebook saga Pyramid Solitaire properly with the error message: uncaughterrorEvent "bubbles = true cancelable = true even + phase = 2"

  Original title: Facebook game of pyramid solitair saga, error mesg

  I receive a message [uncaughterrorEvent "bubbles = true cancelable = true even + phase = 2].  I hit the SPACEBAR to enter a play or to get a total. Can anyone help?

  Hi tipsy,

   

   

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not play the lonely saga Facebook game pyramid correctly with the error message: uncaughterrorEvent "bubbles = true cancelable = true even + phase = 2. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the steps in the link if you are using Internet Explorer and check with the question below:

   

  The problems of games online using Internet Explorer:

  http://support.Microsoft.com/kb/2528246

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

  If the problem persists, you can contact Facebook support to improve assistance on the issue of the links below:

  Facebook Help Center:

  http://www.Facebook.com/help.php

  Contact Facebook and Facebook support:

  http://www.Facebook.com/help/220217228006012/

   

   

  Facebook games help:

  http://www.Facebook.com/pages/games-help/165498566811429

   

   

  I hope the above information helps you and your response is very important for us to ensure a proper resolution.

• Unable to ping a website in command line with an error message: 'ping is not recognized as an internal or external command.'

  Original title: ping does not work

  In the cmd box when I try to ping from a site, I get a message saying 'ping is not recognized as an internal or external command.'

  I entered the command as follows: Office > ping www.yahoo.com

  Dan Calic, salvation

   

   

  Thanks for posting your question in the Microsoft Community.

  I understand that you are unable to ping a website in command line with an error message: 'ping is not recognized as an internal or external command.' Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1 are you facing problems when accessing Internet?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the steps and check the question below:

  a. click Start, and then type the three letters cmd in the search box and then right-click on command prompt and click run as administrator.

  b. type these commands and press enter after each:

  dir %SystemRoot%\System32\ping.exe

  path %path%;%SystemRoot%\System32

  Ping www.yahoo.com

  c. a report.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• my windows laptop 8 is not start blue screen with an error message

  I have a laptop of Acer windows 8 that won't start - it has one blue screen with an error message and other options that work. I do not have a windows 8 dvd or any other device installation and I cannot restart my factory because I have files that are not backed up so they cannot be deleted. Can someone please?

  Thank you for Madi responded and sorry to see that the issue still persists. I appreciate your efforts to try to resolve the problem.

  Since we tried all possible solutions and you do not have a disc of Windows 8. You must contact the manufacturer of the computer. They will be able to participate in the repair of Windows.

  http://us.Acer.com/AC/en/us/content/support

  If you have problems with Windows in the future, get back to us. We will be happy to help you.

• Try to reissue an asset iin adobe muse to come with an error message and close the program

  Hi, I'm trying to recreate a link to some assets that I changed and it is coming up with this error message - Adobe Muse is either an error and will now stop, please report last actions taken for the team of adobe muse - the type of the object unexpected ContentCollectionRecord refers to a style...

  No idea what this means, it only happened when I tried to recreate a link to a few missing PDF documents and then I dropped to the re-establishment of links these and just continued to work, but now it dawns on one although I HAVE to re-edit the link that I've made a few changes, the files that the error occurs on are PDF files. Anyone know what's the problem? I'm new to muse adobe so no idea what the error means. I also have Adobe Muse CC was last updated

  Thank you

  Anna

  Using the icon of the convenient trash in the bottom right of the active panel (instead of the option-click on the offending asset itself) I was able to completely remove the .pdf and lose this pdf on page link.

  With those gone, I managed to download 3rd party within the Muse and everything is good.  You always wonder that spoke of this corrupt pdf.

• When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  You can try to download the 64-bit version.  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I've tried everything.

  I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I tried everything the internet suggested but it continues to wreak havoc... Help, please... John.I cannot give other details that it has become very annoying

  See "hang out":

  • http://KB.mozillazine.org/Firefox_hangs
  • Firefox crashes or does not - how to fix