Rotate in front of and behind a picture

Similar Questions

• How drag and drop a picture into a shape of the object?

  On my old Lion system that I used to be able to drag a picture from iphoto in the shape of the object open in Pages.  I can't be able to do more.  The system changed?  I tried to use Inspector (under help), but it won't let me access the file of the photo on the right.

  You can drag and drop a picture in a form in v4.3 Pages ' 09, but this can be done in any version of v5 Pages. Quite different applications, as well as more recent Pages has lost about 100 features that were in its antecedent.

  Check if you have Pages ' 09 v4.3 in your Applications: iWork ' 09 file. If so, use it.

  Pages v5 requires that you select a shape, and then on the Image tab in the right panel, you choose Image, scale to fill fill, and then select your image for the background. You cannot select this image from the inside, but you can add text to the form that will appear on your image.

• I downloaded an app from a worker ID mobile shop and I am still registered my ID and I am using the application normally but I wonder if he could access this application and see my pictures and conversations!

  I downloaded an app from a worker ID mobile shop and I am still registered my ID and I am using the application normally but I wonder if he could access this application and see my pictures and conversations!

  Any help please?

  N ° unless you have given him your Apple ID and password, in which case he would have access to your entire account.

  You must download the application using your Apple ID. Otherwise, you will have questions the next time the app must replace or update. Strictly speaking, what you were doing was not quite legal, oven if it was a free app.

• The photos in iPhoto and the same pictures? Is it possible to remove/save the photos to iPhoto?

  The photos in iPhoto and the same pictures?  Is it possible to remove/save the photos to iPhoto?

  Yes, they are literally identical. That is to say, time iPhoto Library and photo library (link) to point to the same files on your drive.

  The two libraries does NOT duplicate these files. If you delete the iPhoto library you will find very little storage space.

  My suggestion would be to leave in place iPhoto library until you have the habit of Photos and know with absolute certainty that all migrated to Photos correctly. Even in this case, you can copy, save a copy on a disk external backup and only remove them from your main drive.

• Equium A60-157: black and white TV picture

  use the tv-out, I get a black and white television picture.
  the ideals!

  Hello

  Check it please advanced option search on this forum. You will find many topics with the same theme.

• On my iMac OSX El Capitan v 10.11.3 when editing of photos and work between them the screen takes over and moves the picture on the next picture before Ive had the chance to edit, I then fold the photo required to try again. This can hap

  On my iMac OSX El Capitan v 10.11.3 when editing of photos and work between them the screen takes over and moves the picture on the next picture before Ive had the chance to edit, I then fold the photo required to try again. This can happen several times and its so frustrating.

  Similar thing TI also occurs when you are working on other programs on the mac, but not nearly as much.

  Guessing here, but try to disable drag between pages on the tab more than movements in the system preferences > mouse. or a Trackpad. Depending on whether you are using.

• Swap sides for the scales on the front panel and containers

  Hi all

  Very simple question here. I want to Exchange on sides of the balance on my Front Panel and specifically DSC container as a pressurized tank.

  It is very easy to do with a waveform table or chart, but seems to be impossible with tanks and reservoirs.

  It would be very convenient, especially for the process of DSC where I try to imitate the flow of process on the front panel and pipes could enter tanks of different sides.

  Thank you!

  Here is a tank with the scale on the right. Just took a few minutes with the control editor.

• Epson Stylus Photo R2880, tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Hello

  This looks like a good question for the support of Epson.

  Help and Support - Epson America, Inc..:
  http://www.Epson.com/cgi-bin/store/help/help.jsp?BV_UseBVCookie=Yes&category=products

  Concerning

• Rotate the names Net and Bus

  1. is there a way to rotate the net names and/or names of bus to follow the thread if it slides vertically? The shift/R command does not work. (Version 10.1 Power Pro).

  2. names may be off grid? There is no reason to snap a name to the grid. There are times when the name is crowded, or on an adjacent line. It seems very little professional and sloppy.

  Thanks for the help,

  Scotty544

  Scotty544,

  1 there is no support for rotated text (vertical) currently in v10.1.   The only support existing within components where you can rotate the name of pin (horiz/green), but this won't help you with the names of wiring.

  2. I agree with what you say with the net name labels - they don't behave well when rewire you / move threads.   You can lock, but if you move the wire or rewiring that they don't change very much at all.   For simulation work, I generally recommend leaving the net names enabled, however if you are planning to print your diagram for PCB layout purposes or documentation, you can universally turn labels (options-> properties sheet-> Circuit [tab]-> name [region]) and set it to 'Hide All' or 'using the specific setting Net '.   Note the use of the net specific parameter will force through the diagram, then choose threads are visible.

  Another thread of labelling approach...

  In general, I recommend the use of text (Ctrl + T) or observation points (location-> comment) to specific key within the circuit for documentation purposes.   Also, for the connections that need to go elsewhere (such an escape of connector), you can use the functionality of virtual wiring (netnames need all display or use Net specific setting) or you can use the external page (Place->-> stop Page Plug connectors) connector...   Page connector is typically used to connect to, of course, the connections off-page... If you place a link second off-page down and try to adjust the "RefDes" parameter to match the first manually - double-clicking a message will appear saying "all components must have unique benchmark indicators" and the action will be prevented... however it is a little trick that can be used to connect to the connectors on the same page.   When you place the second connector off-page down, go to the spreadsheet view and select the components tab.   On the first column named "Refdes" go down on the second connector that you want to copy the name to the net and just rename it to match the first.   Multisim will warn you when connect you 2 NET names together on the same page (but that's the idea)... so you can now have net "data0" connected to "data0' with a connector off specific page elsewhere in your design both external and within the page to other pages.  Also, you will have better control the alignment of text - and the label will move with the connector much better with straight wire labels...

  

  Also note that in general, we work to improve the wiring and the net labeling behavior.

  Kind regards
  Patrick Noonan
  Business Development Manager
  National Instruments - Electronics Workbench Group
  50 market St 1-
  South Portland, ME 04106
  Phone: 207 892-9130
  E-mail: [email protected]

• When I download a movie I can watch it, but there is no sound. I tried different and same thing picture no sound. Help, please.

  the picture is there but not sound

  When I download a movie I can watch it, but there is no sound.  I tried different and same thing picture no sound. Help, please.

  Thank you

  miklee

  No guarantee... but installing an AC3 Filter can be
  worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AC3 Filter
  http://AC3Filter.NET/wiki/projects/AC3Filter/releases (scroll down and try - AC3Filter 1.63 full b)

  More...

   
  What is the format of the film? If it is .avi, you can
  you need to install the Xvid codec.

  This can be checked by using the free software GSpot:

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html
  (click to the left of the text: GSpot zip file)

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/

  XviD FAQ
  http://www.xvidmovies.com/FAQ/

  Good luck...

• I have windows vista and somehow my picture turned screen 180 degrees backwards. How can I fix it?

  I have windows vista and somehow my picture turned screen 180 degrees backwards.  How can I fix it?

  Hello FrankHeinsohn,

  Hold down the ALT and CTRL together and then press the left/right/up/down to change the orientation. Press the combination of keys followed by the arrow key to the left first to see if this changes the orientation (you may need to press the selected keys a number of times to get the correct orientation. If the left arrow does not try the right, if this does not work try the high and arrow down.

  Usually, this action solved the problem. If she does not see if you have an icon in the Panel that gives, you go to your video card. Your card might be control NVidia or ATI control panel. Check the tabs until you see an option to change the orientation of the office. Yours, because the cat has his way, is currently portrait, change in landscape mode.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Software to insert text in a photo and then take pictures of Windows to copy on an external USB to print at the pharmacy. Thank you

  You know a software product to insert text in the photo and then take pictures of Windows and copy on an external USB to print at the pharmacy. Thank you

  To achieve this product is Adobe Photoshop http://www.adobe.com/products/photoshop/family/.  This not only allows you to do, but allows you to manipulate pictures in almost any way you choose above all.

  If you are looking for a less expensive solution (although nowhere near as functional), then Microsoft Photo Editor free http://www.brothersoft.com/downloads/microsoft-photo-editor.html will probably do the job for you.  In addition, you can try the free Microsoft Office Picture Manager 2003 to http://www.brothersoft.com/microsoft-office-picture-manager-171868.html.  I suggest that you try the free options to determine if it meets your needs before you spend money on Adobe Photoshop (as good as Photoshop is).

  All these programs have the ability to record in a variety of formats - certainly, including that which can be handled by your local drug store (call them to check to determine what types of extensions that they can support and don't forget to use this format when you are working with your photos).

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• How to save photos in a new file, name it and get the pictures in this file

  I have photos that have been sent to me in an e-mail. I want to save them and create a new file in Windows Live Photo
  Gallery. I right-click and SAVED AS... then went to MY... and under some PICTURES under photos put my cursor
  to open a NEW CASE. He did open an empty folder and not of uploaded photos.

  What I am doing wrong? I want to save the photos, open a new folder/file, name and save the pictures of
  enamel in the new folder/file. How to achieve this?

  Thank you.
  Gilenya

  Gilenya,

  After you create a new folder, you must go inside this folder to save your photos.  I'll bet that you created the new folder, and then you click OK (or save), which caused the pictures save a level upwards in the folder that you created.

• Incompatibility of printer Kodak 3250 reviews and cannot scan pictures

  Tite Originla: programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I am running Windows 7 and a Kodak 3250 printer that was working fine until recently. I get a finding of incompatibility and cannot scan pictures.

  Hello

  · What is the exact error message that you receive with error code if any?

  1. I suggest you to run the printer Troubleshooter and check if it helps. Reference link: open the printer Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Printer-troubleshooter

  2 remove the printer drivers and reinstall the drivers. Follow the steps below:

  a. click on start

  b. type cmd in the start search

  c. right-click on the option of cmd.exe and select run as administrator

  d. type: printui/s/T2

  e. opens the printer server properties page

  f. press CTRL + mouse click, and then select all the printer drivers you wish to uninstall

  g. Select Delete

  Links to install the drivers:

  KODAK all-in - One Printer Home Center software (including drivers) - WINDOWS operating systems: http://support.en.kodak.com/app/answers/detail/a_id/17138/selected/true

  KODAK ESP 3250 all-in - One Printer Firmware - WINDOWS operating systems: http://support.en.kodak.com/app/answers/detail/a_id/17438/related/1/selected/true

• When you open the bridge I get empty frames, I have to click on each one to open and see the picture, is a person tried before and what can be done to fix the problem?

  When you open the bridge I get empty frames, I have to click on each one to open and see the picture, is a person tried before and what can be done to fix the problem?

  Reset preferences, reset the default workspace, and purge the cache.

  Damaged preferences or workspaces can cause unexpected behavior in Adobe Bridge. Purge the cache can solve problems of the thumbnail display.

  • Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  • Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.