Router connection fails when I turn on my hp4625
Hello
I bought a hp 4625 and everything was ok until I decided to change my router.
After changing everytime I turn on the printer,
failed to connect to the laptop with the router and may not return.
If I don't connect the laptop with the router with a connection cable and turn on the printer.
I tried the hp doctor, but did not work.
What should I try?
After the reset of the printer back to factory defaults and the reinstallation of the software, the problem is solved.
Thank you
Tags: HP Printers
Similar Questions
-
Internet connection drops when I turn on the laptop
I use a computer laptop dv7-7250us HP Envy, running windows 8.1. All my software is up-to-date. In the last month, everytime I turn on the laptop, the internet connection drops. Troubleshooting of HP operation resets the wifi adapter. It's boring run the troubleshooter in the mornings. Any suggestions on what I can to prevent that from happening.
I have Intel Centrino Wireless - N installed 2230. I went out to the Intel Web site and most recent driver.
Hello
I rolled back the driver in Device Manager, and now I'm able to connect automatically when I turn on the laptop. The driver that works has been dated to August 2013. The Windows update in June for this caused driver wifi whenever I turned on the laptop.
-
connection failed when on my main.asc file .asc file loading
Hey guys,.
You have a very big problem here. I continue to get "NetConnection.Connect.Failed" when I load a .asc file on my main.asc file, I use the load() method in my code. I really don't understand why this happens, but when I comment the code that loads the CSA file, I can connect successfully to SGF. I can't understand what is happening here. BTW, I'm using fms4 in windows 7 32 bit.
Any response is truly appreciated. Thanks in advance!
Randy
You can download the installer of FMS 3.5 and install it on a different machine and copy the folder I mentioned, and then remove the installation or if you want I can send that Opposite 3.5.3 installation I - give me your email id - I'll send it everywhere if you want.
-
E3000 router connection problem when I use the telphone
I plugged my router through my telphone line. When I use my telphone, I can't connect my computer to my router. When I see the available wi - fi networks available, my router does not see. As soon as I get off my phone, I can see my router and able to connect. I thought that my router has two bands and I'll be able to use it. I'm not a geek.
Help, please. Thank you
Why is your router connected to the phone line?
It must be connected to a DSL Modem or a Cable Modem (assuming that the release for consumption).
Need information in order to determine the question.
Is your wireless phone a DECT 6.0, 2.4 GHz or 5 GHz?
I changed my DECT 6.0 wireless phone because they do not interfere with wireless 2.4 GHz or 5 GHz. older phones use the same frequency as the network and can interfere.
Why so your router on a telephone line?
How often your mobile phone works on?
-
Connection failed when open the SH.rpd online with OBI administration tool
I have a sameple that sh. Deployed DPR and OBI servers are uprunning on a Redhat Linux 5 box. The administration tool on a planter, I tried to open the RPD online, but get the error message connection failed. I was using the same name of user and password I used in offline mode to connect the RPD even.
When the failure of the online connection, I tried to connect offline with the same credentials. I received a warning from read-only, but be able to connect to.
What is wrong here that I can connect offline but not online. Some security configurations on the server side is involved?
Thank youI have a DSN configured in the window box and be able to import database objects.
Certainly, you create the DSN with the 'Oracle BI Server' driver?
When you create or change the DSN, try checking the 'Connect to Server BI Oracle to obtain default settings for the additional configuration options' and click Next. If your DSN is correct, you will get another screen. If not you will get a more descriptive error message, e.g. «...» Authentication failed... «or «Could not connect to port 9703...» "etc.
What do you mean by "import database objects"?
Connection mode is suppose to have the same password online?
Yes
-
'Connection failed' when installing the plugin
We test vCloud and try to use the Orchestrator plugin, we receive an error when connecting to the host vCloud. Orchestrator configuration, try to add a new host vCloud with results shared in the following message user credentials:
https://vcloud. *. *: 443 , Failed to connect with the username ' *'
(Values changed to protect the guilty)
We tried local and LDAP, "SYSTEM" users and normal organizations, and that is the only result. If we use information identification "by user", everything works fine as long as we use the users located in vCloud. Our Orchestrator & vCloud both draw the same AD LDAP.
Is this an acceptable installation? Documentation do not specify use by user credentials.
Thank you.
This probably has to do with DNS (research front/rear) resolution... Try changing the plugin to use the IP address of your vCloud Director server instead of the FULL domain name. This is only a workaround... the difficulty will be to solve DNS problems.
-
Remote Desktop connection fails when the firewall is enabled.
Trying to install Windows 7 Ultimate to allow the desktop remotely from a Windows Phone 8.1.
I have lived this guide allow remote connections to install Win 7 PC. The configuration of the connection I want is only for the local home network. In the firewall settings 'allow through firewall programs' Remote Desktop - RemoteFX is checked for audiences and home networks.
If I disable the firewall of home network the phone connects easily and will control the PC.
With firewall switched network phone will not connect and gives an error code 0 x 204. There is no notification of the computer, the firewall blocks a program.
I just that it works with the firewall of network power.
Hello Garym,
Welcome to Microsoft Community forum.
I suggest that you go through the information provided in the following MSDN blog and see if it helps.
To get help, I suggest you to post your query on TechNet Forums that the query you posted is more complex that can be answered on the community forum. The link is provided below.
http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro
Thank you.
-
Connection failed when importing metadata
Hi all
I installed 11.1.1.6.2 Client on my machine and while I try to import metadata, it throws an error saying "cannot connect". Can someone help me how to solve this problem?
Kind regards
Vishal ESRHello
To give the name of data source as localhost/ORCL and other details.
Hope this will help you
Please indicate if this helps youThank you
-
Satellite A100-785: router restarts automatically when the wireless network card is on
Recently,.
Once, I turn my adapter wireless for my laptop 'ON' and it starts to connect to my router 3com officeconnect wireless.
I found that my router restarts automatically.
This happens each and every time I turn on my laptop with the wireless adapter ON.I use the Satellite A100-785 PPPoE ISP with WPA/AES encryption enabled on the new MS Vista platform.
All drivers updated to the latest versions, and the wireless signal is Excellent.Any suggestions that could be the reason or any recommendation to begin to investigate the matter?
Everything will be highly appreciated. Thank youOnce again; Your WLan router restarts (reboots) when you turn on the WLan on the A100 Satellite Map. Am I wrong?
Well, it's strange, but to be honest I n t see a problem with the laptop but with the router. I would recommend controlled again the unique WLan router configuration.
Good bye
-
Between R2 2012 Windows and IBM Http Server SSL connection failed periodically.
Hi, I have a problem recently. I found that my windows server 2012 R2 has sometimes failed to connect with IBM Http Server ssl. Here it is the information of the two servers:
1 windows 2012 R2
-Already activate TLS 1.2 and TLS 1.0
-Already the latest version of windows update and restart
IIS - 8.5
2 IBM Http Server
-Apache 2.2.31
-using OpenSSL 1.0.2f
-Allow TLS1.2 and TLS 1.0
I also captured network traffic when the two server. If the ssl connection has managed to create. Traffic will be like the following screen:
If the ssl connection was impossible to create, network traffic was like the below:
You will see that the ssl connection failed when the version of the TLS protocol was passed to TLSv1. And returned access denied. The details of the access denied was like the below:
As the captured screen reproduced above, you will see that the SSL for Client Hello was TLSv1.2 but running on the recording layer TLSv1. this Hello customer was sent by the server r2 windows 2012. I don't know why the ssl connection has been passed to TLSv1 suddenly.
I found that Microsoft has released an update on January 12, 2016. This fix is the resumption of SSL. Update ID was 3109853 , but I have already applied this update on my server. I tried to do the with the other type of server ssl connection, the ssl connection is possible in a stable condition and has happened the problem I mentioned. Is there someone met this case and resolve it finally?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
PowerCLI script >; how to show exit if the connection fails.
Hello
I found Googling below script.
The script works fine, but I need more output, if the connection fails when an incorrect user VM account.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
$vms = GET - VM | Where-Object {$_.} PowerState - eq "Receptor"}
ForEach ($vm to $vms)
{
If (Get-VMguest - VM $vm |) Where-Object {$_.} ({OSFullName-like "* Microsoft *"})
{
Invoke-VMScript - VM $vm - GuestUser 'administrator' - GuestPassword 'vmware1!' - ScriptText "= driver sc query type | "find" "vsepflt'" ' bat - ScriptType | format-list name, ScriptOutput, vm
}
}
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
I want to see the output like this...
.\SCRIPT.ps1
VM: VM1
ScriptOutput: Service_Name: vsepflt
VM: VM2
ScriptOutput: Connection failure
Thank you.
You can capture exceptions with a Try-Catch construct.
Something like this for example
$vms = GET - VM | Where-Object {$_.} PowerState - eq "Receptor"}
ForEach ($vm to $vms)
{
If (Get-VMguest - VM $vm |) Where-Object {$_.} ({OSFullName-like "* Microsoft *"})
{
try {}
$out = Invoke-VMScript - VM $vm - GuestUser 'administrator' - GuestPassword ' vmware1! "
ScriptText-"= driver sc query type | "find" "vsepflt'" ' ScriptType - bat - ErrorAction Stop |
Select ScriptOutput - ExpandProperty
}
{} Catch [VMware.VimAutomation.ViCore.Types.V1.ErrorHandling.InvalidGuestLogin]
$out = "invalid logon.
}
catch {}
$out = "another error".
}
Write-Output "VM: $($vm.). "Name): $out.
}
}
-
Hi can anyone help, I am with AOL, I just switched to the Platinum service, I configured my router netgear DG834G wireless and that's all works fine, but if I turn the computer then turn it back I cannot get a connection and when I ask her to fiind wireless networks the computer tells me that windows does not support my wireless network and I must have another program running , but I didn't so I have to reload the settings again for windows to set it up. What happens whenever I turn off the computer. AOL are without help please someone has any ideas - I use windows xp service pack 3
Hi Timstimpson,
It is possible that the Automatic Configuration Windows wireless service is not configured to run at startup.Try the following:1. click on Start and run
2. type in the box to run services.msc
3 scroll down and look for the Automatic Wireless Configuration service4. double-click on the service and make sure that the Startup Type is set to Automatic
Let me know if it works for you!Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I turn on my PC and before opening of session (before entering password and log in) internet connection exists?
Yes. The network stack is active as soon as Windows is running. You can prove this by yourself, if you wish, if you can review your summary router network. It should show the PC in question as being active.
-
I'm losing configuration when I turned off my Cisco 857 router
I bought the new router Cisco 857 of the shop. Router must have been used before as I couln can't go inside with name of user and password default cisco/cisco.
Well I followed digital and reset the password for the user name and password. Now I have finally connected to Cisco CP express on my IE browser.
I discovered that someone was using a router in the shop that's why I countries: ' t log in to him in the first place. In any case the problem is that when I changed my configuration and applies the settings he remembers until I turned off. When I turn on again he remembers all the parameters of this shop.
He returned everything back: IP address, former account to level 15 and password - just like after the password reset.
I tried again and he again lost the settings. So I found instructions:
http://www.Cisco.com/en/us/products/HW/routers/ps233/products_tech_note09186a00800a65a5.shtml
I followed it and changed once again all the settings of the router. My settings are still lost after the power on/off. I noticed that when I do everything first bit it shows
0x2102 not 0x2142 like they think that is password reset mode.
Here is my output from Hyper Terminal:
=============================
Cisco#enable
Cisco#show start
Using 3359 out of 131072 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Cisco
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable secret 5 $1$hpKF$Rc1tl6r45J8iHG7EN5jSk.
!
no aaa new-model
!
crypto pki trustpoint TP-self-signed-3185909327
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3185909327
revocation-check none
rsakeypair TP-self-signed-3185909327
!
!
crypto pki certificate chain TP-self-signed-3185909327
certificate self-signed 01 nvram:IOS-Self-Sig#5.cer
dot11 syslog
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool ccp-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
lease 0 2
!
!
ip cef
no ip domain lookup
ip domain name molinary.com
!
!
!
username admin privilege 15 secret 5 $1$jD3j$r6ROikgGsIlcMTGjkxFQ6.
username username privilege 15 password 0 password
!
!
archive
log config
hidekeys
!
!
!
!
!
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
description $ES_WAN$
ip nat outside
ip virtual-reassembly
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$
ip address 10.10.10.1 255.255.255.248
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
interface Dialer0
ip address dhcp
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname [email protected]/* */
ppp chap password 0 netgear01
ppp pap sent-username [email protected]/* */ password 0 netgear01
!
ip forward-protocol nd
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 1 interface ATM0.1 overload
!
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 10.10.10.0 0.0.0.7
dialer-list 1 protocol ip permit
no cdp run
!
control-plane
!
banner exec ^C
% Password expiration warning.
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username
privilege 15 secret 0 Replace
and with the username and password you want to use.
-----------------------------------------------------------------------
^C
banner login ^CAuthorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!^C
!
line con 0
login local
no modem enable
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end
Cisco#
Cisco#
Cisco#
Cisco#
Cisco#
Cisco#
Cisco#
Cisco#
Cisco#show version
Cisco IOS Software, C850 Software (C850-ADVSECURITYK9-M), Version 12.4(15)T12, R
ELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 22-Jan-10 14:46 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE
Cisco uptime is 20 minutes
System returned to ROM by power-on
System image file is "flash:c850-advsecurityk9-mz.124-15.T12.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 857 (MPC8272) processor (revision 0x400) with 59392K/6144K bytes of memory
.
Processor board ID FCZ140792J5
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
4 FastEthernet interfaces
1 ATM interface
128K bytes of non-volatile configuration memory.
20480K bytes of processor board System flash (Intel Strataflash)
Configuration register is 0x2102
Cisco#
Cisco#
Cisco#
Cisco#end
Translating "end"
% Unknown command or computer name, or unable to find computer address
Cisco#reload
Proceed with reload? [confirm]
*Mar 1 01:19:27.786: %SYS-5-RELOAD: Reload requested by username on console. R
eload Reason: Reload Command.
System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
C850 series (Board ID: 2-149) platform with 65536 Kbytes of main memory
Booting flash:/c850-advsecurityk9-mz.124-15.T12.bin
Self decompressing the image : ############################################## [O
K]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C850 Software (C850-ADVSECURITYK9-M), Version 12.4(15)T12, R
ELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 22-Jan-10 14:46 by prod_rel_team
Image text-base: 0x8002007C, data-base: 0x814E7240
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 857 (MPC8272) processor (revision 0x400) with 59392K/6144K bytes of memory
.
Processor board ID FCZ140792J5
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
4 FastEthernet interfaces
1 ATM interface
128K bytes of non-volatile configuration memory.
20480K bytes of processor board System flash (Intel Strataflash)
no ip dhcp use vrf connected
^
% Invalid input detected at '^' marker.
SETUP: new interface NVI0 placed in "shutdown" state
Press RETURN to get started!
*Mar 1 00:00:03.952: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State change
d to: Initialized
*Mar 1 00:00:03.960: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State change
d to: Enabled
*Mar 1 00:00:07.244: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
up
*Mar 1 00:00:08.413: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to up
*Mar 1 00:00:08.821: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 01:19:27.072: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state t
o up
*Mar 1 01:19:27.352: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C850 Software (C850-ADVSECURITYK9-M), Version 12.4(15)T12, R
ELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 22-Jan-10 14:46 by prod_rel_team
*Mar 1 01:19:27.352: %SNMP-5-COLDSTART: SNMP agent on host Cisco is undergoing
a cold start
*Mar 1 01:19:27.436: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Mar 1 01:19:27.436: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Mar 1 01:19:27.540: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, chan
ged state to down
*Mar 1 01:19:28.072: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Ac
cess1, changed state to up
*Mar 1 01:19:28.484: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, cha
nged state to up
*Mar 1 01:19:28.484: %LINK-5-CHANGED: Interface ATM0, changed state to administ
ratively down
*Mar 1 01:19:28.848: %LINK-5-CHANGED: Interface NVI0, changed state to administ
ratively down
*Mar 1 01:19:28.932: %LINK-3-UPDOWN: Interface FastEthernet3, changed state to
up
*Mar 1 01:19:28.936: %LINK-3-UPDOWN: Interface FastEthernet2, changed state to
up
*Mar 1 01:19:28.940: %LINK-3-UPDOWN: Interface FastEthernet1, changed state to
up
*Mar 1 01:19:29.484: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, chan
ged state to down
*Mar 1 01:19:29.932: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et3, changed state to down
*Mar 1 01:19:29.936: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et2, changed state to down
*Mar 1 01:19:29.940: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et1, changed state to down
*Mar 1 01:19:29.948: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to upAuthorized access only!
===========================================
Please help me as I am stuck and can't go any further....
Hi Dragan,
After you run the wizard Cisco CP Express, it should save the configuration set to update the flash on the router. However, in your case, it seems this is not the case. Therefore:
- Configure the device via Cisco CP Express--> do NOT turn off after that
- Connect to the router with Hyperterminal. Enter the configuration mode by typing:
Enable
When you are prompted for a password to put in. The line should now be router #.now type:
write memoryYou see errors? Otherwise, type:
See the startup-configCheck the output matches the configuration you've tried. If Yes, then you are good to go. If this is not the case, let us know all the errors you received.
-
Update of Adobe Reader, Shockwave Flash and Java used to be so easy... until a year ago. Now, I hate when I run the Plugin Firefox check, only to see the UPDATE. I seem to be able to download ("initialization") the app, but when I go to INSTALL (I hope I have the right words), it indicates that the CONNECTION FAILED. Try again. THE CONNECTION HAS FAILED. CLICK FINISH TO RESTART THE INSTALLATION PROCESS. It became a cycle without end I contacted my internet provider (and going through their process of reboot) I'm connected to the Internet. I disabled my anti-virus prgm and my firewall; nothing seems to help. Last time I could actually INSTALL one of the programs/applications above, I did it with the help of ' solving problems when you use Firefox "... and who let me download,... but I can't find a selection like this now... it's why I write for Firefox/Mozilla.
I have been using Firefox for about 5-6 years now, and I love it! Except for these issues. I'm not a dummie, but not a geek either... I just need help.- See Flash Plugin - maintain and troubleshoot
- Use the adobe page
http://www.Adobe.com/software/Flash/about/
At the same time check the version installed, and which is the latest available versions.
You have a version 17 for what is very recent and are perhaps the most recent and up to date. The latest version is currently 17.0 v. 0.188
There may be some small problem with the auditor to update Firefox rather than with your updates.
- The Firefox Plugin checker is available in the page manager addons or use this link
Mozilla.org/pluginCheck/
Maybe you are looking for
-
Hello, I just bought an iPhone for my mother from a supplier in line 6. The packaging is different from what I had with my own iPhone 6 and since I don't have 100% confidence that I would like to know whether or not this packaging is an original Appl
-
Please a few windows open only while im working on the browser how can I stop this?
This is evrything.Thank you
-
How to make a stacked cluster chart?
I am creating a cluster diagram, classified by different emails sent to customers (let's call them 1, 2 and 3 Email) and has each kind of stacked e-mail based on the answer (opened, clicked). Is it possible to have your chart be grouped and stacked?
-
Hi, I have a slate 21 my problem is that when I plug in my memory stick I can see it in the file manager, but not the content. All the files on the memory stick are in Hp media player and the books I have on there under the picture so that I can't re
-
How to open an HP Compaq dc7900 Small Form factor PC case?
How I open my HP Compaq dc7900 small form Factor PC Desktop case? I would like to install a Wi - Fi adapter PCI card. Thank you!