PowerCLI script > how to show exit if the connection fails.

Similar Questions

• PowerCLI script to migrate virtual machines to the new vCenter environment

  Hello world

  in the next few weeks, we need about migrate 700 VMs (Windows/Linux) server to a new environment (new vCenter, new hosts, but VMs will remain on same data warehouses). VMs will be migrated not in one batch, but rather from time to time (which, however, can understand the need to migrate some 10s of virtual machines at the same time).

  Cluster names and folder structure will be identical to the old and the new vCenters. As host in the new vCenter names differ from those in the old vCenter, thought to provide a table of 'translation', which tells the script to save a given VM on host B (new vCenter) when having been registered in order to host a (old vCenter) and so on.

  I thought writing a PowerCLI script which, broadly speaking, can accomplish the following steps:

  • Connect to vCenterOld and vCenterNew
  • Correspondence table of host to read from a file (see step "register VM vCenterNew below)

  Then, in a loop:

  • Ask VM name
  • Get the settings of the virtual machine: Datastore/path, network/Portgroup, HA restart priority, host, folder, note
  • View the parameters and the VM name and request confirmation migrate the virtual machine
  • Turn off VM (closed OS gracefully, but force power off if power status is still not equal 'off' after a time given)
  • To unsubscribe from VM vCenterOld (removal of inventory)
  • Registry of the VM to the data store vCenterNew (assumptions: same folder as vCenterOld, host names are different, but for each source in vCenterOld host a host of destination in vCenterNew for you join the virtual machine to can be provided, that is, CSV)
  • The value of VM portgroup (same name as in vCenterOld)
  • Set VM HA restart priority
  • PowerON VM
  • Wait / check the VM (for example, ping) connectivity / continue immediately if the virtual machine is accessible or after a certain time if the virtual machine is still inaccessible
  • Confirm that the virtual machine has been migrated successfully, OR ask the user to check the connectivity of the virtual machine

  Now to my questions:

  • Is anyone know about an existing script that does something similar or contains parts that can be useful to compile a script like this?
  • How can vCenter two connections at the same time been managed within a PowerCLI script - or doesn't work at all and a connect/disconnect to/from the two vCenters must be completed for each virtual computer?

  Many thanks for any help.

  The following seems to work for me

  $vm = Get-VM -Name MyVM$nic = Get-NetworkAdapter -VM $vm $vdPG = $nic | select -ExpandProperty NetworkName
  
  Get-VDPortgroup -Name $vdPG
  

• How can I check if the connection is broken?

  Hi, how can I check if the connection is broken?

  such a code:

  try{
  
  SocketConnection _s = (SocketConnection)Connector.open(address);
  
  }catch(Exception e){}
  

  will return me an exception when I can't connect. But what happens if I am connected to the server for a few minutes and after that something happens that break the connection? How I check that?

  Kind regards

  The following links can help you:

  http://thiamteck.blogspot.com/2008/10/Java-check-if-socket-connection-broken.html

  http://www.velocityreviews.com/forums/t136509-how-to-check-if-a-server-has-disconnected-a-socket.htm...

• Try to update Shockwave Flash; It downloads, but when I click on install; the connection fails? WHY not the connection?

  Update of Adobe Reader, Shockwave Flash and Java used to be so easy... until a year ago. Now, I hate when I run the Plugin Firefox check, only to see the UPDATE. I seem to be able to download ("initialization") the app, but when I go to INSTALL (I hope I have the right words), it indicates that the CONNECTION FAILED. Try again. THE CONNECTION HAS FAILED. CLICK FINISH TO RESTART THE INSTALLATION PROCESS. It became a cycle without end I contacted my internet provider (and going through their process of reboot) I'm connected to the Internet. I disabled my anti-virus prgm and my firewall; nothing seems to help. Last time I could actually INSTALL one of the programs/applications above, I did it with the help of ' solving problems when you use Firefox "... and who let me download,... but I can't find a selection like this now... it's why I write for Firefox/Mozilla.
  I have been using Firefox for about 5-6 years now, and I love it! Except for these issues. I'm not a dummie, but not a geek either... I just need help.

  • See Flash Plugin - maintain and troubleshoot
  • Use the adobe page
    http://www.Adobe.com/software/Flash/about/
    At the same time check the version installed, and which is the latest available versions.

  You have a version 17 for what is very recent and are perhaps the most recent and up to date. The latest version is currently 17.0 v. 0.188

  There may be some small problem with the auditor to update Firefox rather than with your updates.

  • The Firefox Plugin checker is available in the page manager addons or use this link
    Mozilla.org/pluginCheck/

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• Import metadata connects in online mode, but "view data" says the connection failed

  Hello

  My installation of obiee is on AIX (solutions for linux will be good). I installed successfully obiee. I created a connection odbc with no problems.

  I download and installed the dev admin too i.e. the stand-alone tool.

  Offline, the two 'import metadata' and after the table is imported, 'Examining the data' works without any problem.

  In online mode, I click on 'Import metadata' of the connection pool or file, both instantly connect. Once the table is imported, I select a column and say "Look at the data" and it says that the connection failed. Should the customer Oracle DB installed on the machine as unix? I tried to copy the file tnsnames.ora to my local computer to the OracleBI_1/network/admin directory, restart services and connected in online mode, BUT always "the connection failed".

  Could someone help me with this please? seems to be a known issue.

  Thank you

  Dan

  YES for the Oracle client.

  Check this parameter to the top of the Data Sources on Linux and UNIX - 11 g Release 1 (11.1.1)

  You can copy the admin folder or completely ignore

• ORA-28546: initialization of the connection failed, probable Net8 admin error

  I'm unable to access DB SQL Server to Oracle

  ERROR on line 1:

  ORA-28546: initialization of the connection failed, probable Net8 admin error

  ORA-02063: preceding the line of ODBC

  Please suggest? Here are the details:

  DBlink is

  Create the link to ODBC database to connect to 'his' identified by "orcl" using "master";

  File D:\app\admin\product\11.2.0\dbhome_1\hs\admin has initMaster.ora

  HS_FDS_CONNECT_INFO = master

  HS_FDS_TRACE_LEVEL = OFF

  ORACLE_HOME (D:\app\admin\product\11.2.0\dbhome_1\NETWORK\ADMIN) file has listener.ora and tnsnames.ora as follows:

  1. tnsnames.ora:

  tnsnames.ora # Network Configuration file: D:\app\admin\product\11.2.0\dbhome_1\network\admin\tnsnames.ora

  # Generated by Oracle configuration tools.

  LISTENER_ORCL =

  (ADDRESS = (PROTOCOL = TCP) (HOST = FILT137)(PORT = 1521))

  ORACLR_CONNECTION_DATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (CONNECT_DATA =

  (SID = CLRExtProc)

  (PRESENTATION = RO)

  )

  )

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = FILT137)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl)

  )

  )

  Master = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=FILT137) (PORT = 1521)) (CONNECT_DATA = (SID = master)(HS=)))

  #Master = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=FILT137) (PORT = 1522)) (CONNECT_DATA = (SID = Master))(HS=OK))

  1. Listener.ora:

  listener.ora # Network Configuration file: D:\app\admin\product\11.2.0\dbhome_1\network\admin\listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = D:\app\admin\product\11.2.0\dbhome_1)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:D:\app\admin\product\11.2.0\dbhome_1\bin\oraclr11.dll")

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = FILT137)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = D:\app\admin

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = master)

  (ORACLE_HOME=D:\app\admin\product\11.2.0\dbhome_1)

  (PROGRAM = dg4odbc)

  )

  )

  Problem-

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] The specified DSN contains an architecture

  incompatibility between the driver and the Application {IM014}

  Solution-

  Made 'Master' DSN for 64-bit and 32-bit help following and it resolved.

  For 64-bit ODBC locates here (c:\windows\system32\odbcad32.exe).

  For 32-bit ODBC locates here (c:\windows\sysWOW64\odbcad32.exe)

• How to show popup on the filedownload button action

  Hi Experts,
  
  Work on jdev 11.1.1.3.0, ADF BC with rich faces.
  
  I need in my application as I need to display the pop-up window and at the same time need to download the file. as the selected lines in the table I have validation on each line, if the validation failed lines I need to show in the popup to the user as I have rows of validation success also these lines I need to generate a file and I want to download.
  
  I have written logic on the command button that has fileDownload, logical remaining here works very well except the popup display. can someone tell me how to solve this problem.
  
  Published by: user5802014 on August 19, 2010 17:57

  Hello

  I must admit that I did not sample myself. However, in your JavaScript code, I see 1 problem

  you have the following line in the script

  actionEvent.forceFullSubmit ();

  This causes a shipment of full page and a page refresh, which prevents the opening of popup

  Frank

• How to show or hide the region of the shuttle during the click on the radio buttons?

  Hello

  I'm new to JDeveloper. Here is my requirement.

  1. create 2 radio buttons: Yes and no and default displays "" selected radio button.

  2. create a region of shuttle with select query in VO.

  Query is:

  Select 'No group' for_user, for_pkg double null

  Union

  Select "Company" for_user, for_pkg "SEGMENT1" double

  Union

  Select 'Rental' for_user, for_pkg 'SEGMENT2"double

  Union

  Select 'Cost center' for_user, 'SEGMENT4' double for_pkg

  Union

  Select 'Project' for_user, 'SEGMENT5' double for_pkg

  Union

  Select "Intercompany" for_user, "SEGMENT8" for_pkg of the double

  order by nulls first for_pkg

  3. initially hide the region of the shuttle during the loading of the page.

  4. click on the radio button 'yes', display area of the shuttle with values at the head of list of query VO and empty list leak.

  5. new click on the 'no' radio button, he must hide region and so screen shuttle shuttle dynamically according to the selected option button.

  But my problem is I am able to hide area shuttle when the page loads at the beginning and after that, when I'm clicking 'Yes' radio button, is just to display area shuttle empty without value in the main list and once when I'm clicking 'No' radio button, it should hide area shuttle but he's not hiding. I used the RPP to show or hide the area Shuttle under certain conditions. I use JDev 10.1.3.3.0 version as we Oracle EBS version 12.1.2 in our society.

  Please find the attached draft and suggest me proper with examples of sample approach.

  Monika,

  I tried to get this working in the lower version of Jdeveloper and looks like it works.

  Can you make the change below and see what happens.

  1. modify your query to VO as below: (I replaced null with SEGMENT0)

  select 'No Grouping' for_user, 'SEGMENT0' for_pkg from dual
  union
  select 'Company' for_user, 'SEGMENT1' for_pkg from dual
  union
  select 'Location' for_user, 'SEGMENT2' for_pkg from dual
  union
  select 'Cost Center' for_user, 'SEGMENT4' for_pkg from dual
  union
  select 'Project' for_user, 'SEGMENT5' for_pkg from dual
  union
  select 'Intercompany' for_user,'SEGMENT8' for_pkg from dual
  order by for_pkg
  

  2. place VO execution to the processFormRequest:

      public void processFormRequest(OAPageContext pageContext,
                                     OAWebBean webBean) {
          System.out.println("In process Form Request");
          super.processFormRequest(pageContext, webBean);
          OAApplicationModuleImpl appModule =
              (OAApplicationModuleImpl)pageContext.getApplicationModule(webBean);
          String eventParam = pageContext.getParameter(EVENT_PARAM);
          System.out.println("eventParam: " + eventParam);
          if ("showHideShuttle".equals(eventParam)) {
              //  appModule.invokeMethod("deletetrailing");
              System.out.println("Inside If");
              OAMessageCheckBoxBean messageCheckBoxBean = (OAMessageCheckBoxBean)webBean.findChildRecursive("checkBoxBean");
              System.out.println("messageCheckBoxBean : " + messageCheckBoxBean);
              String messageCheckBoxBeanVal = (String)messageCheckBoxBean.getValue(pageContext);
              System.out.println("messageCheckBoxBeanVal: " + messageCheckBoxBeanVal);
  
              if ("Y".equals(messageCheckBoxBeanVal)) {
                  OAViewObjectImpl shuttleVO1 =
                      (OAViewObjectImpl)appModule.findViewObject("ShuttleVO1");
                  if (shuttleVO1 != null) {
                      shuttleVO1.setWhereClause(null);
                      shuttleVO1.setWhereClauseParams(null);
                      shuttleVO1.executeQuery();
                      System.out.println("Executed Query : " + shuttleVO1.getQuery());
                  }
                  OAViewObjectImpl shuttleVO2 =
                      (OAViewObjectImpl)appModule.findViewObject("ShuttleVO2");
                  if (shuttleVO2 != null) {
                      shuttleVO2.setWhereClause("1=2");
                      shuttleVO2.setWhereClauseParams(null);
                      shuttleVO2.executeQuery();
                      System.out.println("Executed Query1 : " + shuttleVO2.getQuery());
                  }
              }
              String[] name = { "RenderAttr1" };
              String[] val = { messageCheckBoxBeanVal };
  
              Serializable[] params = { name, val };
              Class[] paramTypes = { String[].class, String[].class };
              appModule.invokeMethod("setXXCustomPVOValues", params, paramTypes);
  
          }
  
      }
  

  3. move Spel link shuttle Bean for the region of header above.

  Some useful links for the shuttle Bean:

  Technology blog based in Java of Sushant: 13. Area of application OFA shuttle

  Framework OA Blog: control of the shuttle as part of OSTEOARTHRITIS

  See you soon

  AJ

• WLST script - how to configure clientID for factory connections?

  We are on Oracle weblogic 10.1.3.6 and WLST script to create the new queue, subjects and connection factory. Here is excerpt from node by us using

  def createCF (cfname, cfjndiname, xaEnabled):

  print 'START createCF() '.

  CD ('/JMSSystemResources/' + '/JMSResource/' + ModuleName + ModuleName)

  CF = create (cfname, "ConnectionFactory")

  FC. JNDIName = cfjndiname

  cf.setDefaultTargetingEnabled (true)

  # Set enabled XA transactions

  If (xaEnabled is "true"):

  cf.transactionParams.setXAConnectionFactoryEnabled (1)

  cf.transactionParams.setTransactionTimeout (3600)

  CD ('/JMSSystemResources/' + ModuleName + '/JMSResource/' + ModuleName + '/ConnectionFactories/' + cfname + '/ClientParams/' + cfname)

  # Define the strategy of the customer ID.

  cmo.setClientIdPolicy ('Unrestricted')

  # Set subscription sharing policy

  cmo.setSubscriptionSharingPolicy ("feature")

  Print "END createCF()".

  The code above works perfectly well. In addition, we would like the ClientId value for the connection factory. We tried with the following and both failed with "AttributeError: setClientID.

  cf.setClientID ('myClientID')

  cmo.setClientID ('myClientID')

  Pointers to the right function, would be a great help. Thank you

  Connect ("weblogic', ' passwd ',' t3: / /: 7001'")

  Edit()

  Try:

  startEdit()

  module = cmo.createJMSSystemResource ('testModule')

  resource = module.getJMSResource)

  print 'creating connection factories. "

  resource.createConnectionFactory ('Test_CF')

  ConnectionFactory = resource.lookupConnectionFactory ('Test_CF')

  connectionfactory.setJNDIName('jms/aia/Test_CF')

  connectionfactory.setDefaultTargetingEnabled (true)

  connectionfactory.getClientParams (.setClientId('12345'))

  # connectionfactory.getTransactionParams (.setTransactionTimeout) (3600)

  # connectionfactory.getTransactionParams () .setXAConnectionFactoryEnabled (true)

  # connectionfactory.getLoadBalancingParams () .setLoadBalancingEnabled (true)

  # connectionfactory.getLoadBalancingParams () .setServerAffinityEnabled (false)

  Print "Test_CF Created"

  Save()

  Activate (Block = 'true')

  Print "JMS configuration made all the changes enabled."

  except Exception, e:

  dumpStack()

  print ' Exception occurred while creating JMS resources:, e. Report this error to the team of Directors integration AIA'

  Undo('true','y')

  stopEdit('y')

  Disconnect()

  Exit()

  Best regards

  Vivek Vishal

• How can I get all the connections on a windows 2008 r2 through a VPN server?

  How can I route all internet connections on a Windows 2008 Standard r2 through a VPN server?

  When I try to run just on an account administrator through regular networking, it hits the vpn in offline mode when someone else that the administrator is trying to distance in.

  I have to use a vpn, because I'm on a school network and have permission to use the server, but I have to do my own static IP address.  My solution for the static IP address, he ran through a VPN with data unlimited which ended with a dedicated static IP address.

  Everything on the server works when comes the administrator will connect.  Site Internet/game/file Services/Ect.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Not able to connect to MWAGUI. Telnet works, but MWAGUI in error "the connection failed". Help, please...

  Not able to connect to MWAGUI

  Telnet works, but MWAGUI giving the error "connection failed". Help, please...

  We bounced back the application and services many times MWA. Also, we have disabled enabled several port but no solution yet.

  There are 3 work of the plates for MWA GUI on the Windows Machine.

  Patch # 12574324 for 11i

  Patch # 12780257 for 11i

  Patch # 20983924 for R12

  All these patches work on Windows 7 and 8, with all versions of Java.

  The first two patches for 11i work on R12 also but with a minor problem. When you press tab even though visually the cursor moves to the next field, but in reality, it remains in the previous filed and what you enter is taken as a stream in the previous field. The replacement of the tab in the first two tasks is .

  To solve this problem the 3rd patch was created, which is the latest patch to work for R12 too but this patch after a few ORS and Patch requests (other modules) does not work anymore and gives the error "unable to connect". The first two patches can be used s a solution until a new patch coming to replace 20983924.

  Please note that CMD/batch of all three patches files is performed differently, so follow the guideline strictly for the respective patch.

  Kind regards

  Pierre Paul

• the connection failed

  Hello

  I have a new mac, I try to run a more soft adobe but the same message is displayed continuously:

  «the failure of the connection, this ID has already been used pour activate the software on two computers...» »

  I use it on another computer, but I disabled it for a 3rd.

  So I have to use it but by impossible...

  someone already had this problem?

  Thank you

  read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• Hello. I need help developing a PowerCli script that will show me the current configuration of the video Ram of each individual virtual machine on a host\cluster or a vcenter. Can you help me?

  I have a script that will allow me to change the configurations of VRAM, but I need a script that retrieves the configuration of all virtual machines VRAM in my infrastructure.
  I need to get out information to a csv file and run this report on a monthly basis... can you help me?

  Right now my environment is mixed. I have Windows XP virtual machines set to 4 MB, Windows 7 virtual computers set to 8 MB and a subset of sall of virtual machines set to automatic detection of settings.

  I need to be able to recover these settings in a CSV file in order to use this information for comparisons of trdouble-shot performance issues...

  Thank you.

  

  Try something like this

  Get - VM |

  Select Name,

  @{N = "OS"; E={$_. ExtensionData.Config.GuestFullName}},

  @{N = "VideoRamMB"; E = {}

  [math]: Round (($_.)) ExtensionData.Config.Hardware.Device |

  where {$_-is [VMware.Vim.VirtualMachineVideoCard]} |

  (Select VideoRamSizeInKB - ExpandProperty) / 1 Ko, 1).

  }} |

  Export-Csv vm - videoram.csv - NoTypeInformation - UseCulture

• PowerCLI Script to migrate virtual machines with the same network Source for the new vCenter Server.

  Hi all

  I checked a few posts on the migration to the new vCenter Server virtual machine. But I'm not very good with Powercli and need some help here.

  We have a new vCenter server where we migrate virtual machines from one source vCenter server. Here are two things that I don't know how to connect together to make sure that bwfore we turn on the virtual machine to the virtual machine is connected to its source network.

  Part 1 - this script works well but do not get any network on the vCenter destination.

  cluster = Get-Cluster "clusterA.

  $inventory = get-Cluster $cluster | Get - VM | Add-Member - MemberType ScriptProperty-name "VMXPath" - value {$this.extensiondata.config.files.vmpathname}-Passthru-Force | Select-Object Name ResourcePool, folder, VMXPath |

  $inventory | Export-Csv c:\file.csv

  $inventory = import-csv c:\file.csv

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  Part 2 - I want to preserve the Portgroup macaddress and the Ip of the virtual computers and connect them to the new vCenter. How can I do this with the script below. Or how can I combine them together?

  $vm_list = get-Cluster-name "clustera | Get - VM test * | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  Step 2

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-RunAsync Verbose - confirm: $false

  Step 3

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool.Name

  New-VM - ResourcePool (ResourcePool-Get-name $resource_pool) VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  Step 4

  # Put the network cards

  foreach ($info in $inventory)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose-RunAsync-confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null}

  }

  Thanks in advance for any help.

  Hi all

  I made some changes to the script and it worked for me. We have added a host on the destination with all exchanges and storage mapped vCenter.

  $vm_list = get-Cluster-name 'Site B - b | Get - VM | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-Verbose - confirm: $false

  $cluster = get-Cluster "Site A - clustera.

  {foreach ($vm to $information)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm.path - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool

  New-VM - ResourcePool (ResourcePool-Get-name "test1") VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  # Put the network cards

  .

  foreach ($info in $information)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose - confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null

  }

  Hope this will help many of you.