router Linksys WRT54GH is not detecting my NET!

Similar Questions

• Linksys wusb100 device not detected-'Code 43'

  Original title: linksys wusb100 device not detected

  I am running windows 7 64 bit I have a Linksys WUSB100 the error I get is Windows has stopped this device because it has reported problems. (Code 43) I think that the device does not work in windows 7 any idea out there

  Hello

  1. Have you made changes on the computer before this problem?
  2. He previously worked?
  3. Have you installed device driver oon your computer?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Run the facilities of diagnostic tool do not work or are not detected in Windows

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Uninstall the device driver, download the latest driver by downloading from the website of the manufacturer of the device, install on your computer and check the status of the issue.

  a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  b. in the list, double-click the type of device and then look for the specific device that is not working properly.
   
  If an exclamation point appears next to the device name, Device Manager cannot find the device driver. Go to "Use Windows Update to find a device driver."
   
  If no exclamation point appears next to the name of the device, go to "uninstall and reinstall the driver for the device."

• Router Linksys EA6900 does not

  My Linksys EA6900 router does not allow me to connect on any device. I tried to reset and restore but the router will not reset. It is the first version of the material.

  Hi lockwoodg. When you say reset, did you press the red on the back of the router reset button? I suggest to try to remake a reset by pressing the button of reset for 30 seconds while the power is on.  Release the button and unplug the unit.  Power on and connect a computer to one of the ethernet ports. Try to access page to the 192.168.1.1 and do a restore or do the reinstall of the parameters manually.

  Hope that helps.

  Liezl-10104

  Linksys technical support

• My computer does not my router Linksys detect my internet connection. Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.

  connection and download Internet problems

  My computer does not my router Linksys detect my internet connection.  Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.  How to solve these problems?  so that my programs to work, I need these features.

  Hello

  1. you are using a wired or wireless?

  2 have you made any changes to the computer before the show?

  3. you receive an error message when you try to connect the Linksys router to the computer?

  4. what exactly happens when you try to update I Tunes?

  5. you receive an error message while updating I Tunes software?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can try the steps of troubleshooting provided in the links below and check if the problem persists.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• Linksys does not detect not internet connection.

  My linksys router hotspot does not detect my internet connection. My internet connection is clear. How would I fix this? Help, please.

  Hello

  You need to reset the Linksys router and then check if the problem persists.

  Note: you need to contact Linksys in order to reset the router.

  Hope this information helps.

• Wireless router Linksys Cisco's E4200 will not connect to Qnap TS - 212 turbo NAS

  My Qnap turbo NAS TS - 212 does not work in my home network.

  The NAS is connected to a Cisco Linksys E4200 (Gbit port) wireless router and I have a Windows7 PC connected to the router as well.

  I can connect to the NAS during init/config (the first minutes before a long beep) but after the bee long SIN disappears from the network. The QNAP Finder can't find the SIN and I cannot ping the NAS server.

  What can be the reason causing this loss of connection into the router?

  The NAS works when I use a wireless older router SITECOM 54 g router.

  Do I need a special in the router config please NAS Qnap TS-212?

  you get a light for the ethernet port you have the NAS connected to? the ethernet connection can be registered not that could be the reason why the SIN is not detectable.

  you have the NAS set to an ip address static or is it to dhcp? If the dhcp, check the table of the router DHCP clients to verify if the NAS is networked and assign an IP address. you have reset your NAS? You may need to do. also, on the side of the router firmware may need to be updated to fix bugs that the current version could have. Go to the Page of Support E4200 to the latest vesion. You can also check for the latest firmware for your SIN.

• Desktop computer can not detect the wireless router, even with adapter

  Hello

  I broke my laptop so I got out my old office since 2003. Its a gateway computer. There was no place where to connect my internet wire so I went out and bought a usb wireless adapter and updated my computer to Windows XP Home Edition. I put the CD and went through the Hardware Wizard. I said to her work and connected to the internet on the adapter set up the screen. BUT I can't access the internet. I tried the wizard network wireless, but sound does not detect anything either and does not work when I try to do it manually either.

  Help, please. I can't afford a new laptop close to Christmas it :(

  Hello

  • You have security software installed on the computer?

  I suggest to access the link below and follow the steps in the article to resolve the problem of connectivity wireless network on your computer and check to see if it helps you solve the problem.

  http://support.Microsoft.com/kb/870702

  You can also navigate to the link below and follow the steps in the article to set up the connection Wireless on your computer.

  http://www.Microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WRT1900AC - external storage - not detected

  I have an external storage drive is not detected. I can plug in a USB key on the router and have found things. When I plug my external hard drive into the router, I get the name of the drive but the router does not detect the size, and I can't access the drive. The only error I get is on the Media Server tab when I click on add a new folder:

  /jnap/storage/ListSubdirectories -- Status: 200 OK
   Date: Thu, 11 Feb 2016 03:36:53 GMT
   Server: lighttpd/1.4.34
   Connection: close
   Content-Length: 37
   Content-Type: application/json; charset=utf-8
  

  When I contacted Linksys support they said essentially that since my drive hard is not on their approved list, has nothing they will do to help understand why things don't work. I tried to plug my drive into a computer and everything works so I know the drive itself is good. It's just a matter of getting the router also detect the drive. The drive is formatted in NTFS.

  The router says it's firmware is up to date 1.1.10.167514. I tried to reboot the router. The only thing I have not tried yet is a factory reset.

  It solved!

  The only way that I came to this solution was to use Linux. When I tried to plug the drive into a machine Windows the drive appears fine, but when I plugged the drive on a Linux machine and tried to mount it, I got a message saying that he could not climb because of some windows something or other. I think it happened, I had originally this drive in a windows-based Office Tower. I probably throught windows stopped but in reality it is only in hibernation. So the left Hibernate trace settings on the drive after I unplugged and tried to plug it into the router. The solution was to reconnect the drive on the windows machine, make a clean shutdown and then try to plug in the router. Once the router has seen the car and ability. I still had to tell the router to restart so that other computers can access the network share, but in the end, everything works fine.

  I am just posting this in case someone else found this useful if they have they previously used on another computer in the car, do a clean shutdown before attempting to connect to the router.

• "Setup could not detect all the printers.

  I've recently set up a new computer and the network.  The host computer is running Vista.  I have connected a Deskjet 6940 via an ethernet cable into the Linksys router and can print from the host computer.

  I have a laptop which is under XP Pro, and who has a connection with the network.  I downloaded the driver from HP on the laptop to try to connect with the 6940, but during the install process, I get the message "Printer not found - Setup could not detect all the printers on the network."

  Firewalls on both computers is disabled.

  When I type the IP address in the address of the host computer or on the portable bar, I page of the printer, including its SSID.

  I tried to type the IP address in the field suitable for the installation of HP on the portable routine, however and always got the "printer not found."

  Ideas?  TIA

  The Deskjet 6940 being on the network, we will try to add the printer manually. Here is the sequence to XP:

  1. Click on the button 'Start'--> Printers and fax machines.
  2. Under print jobs, click on "Add Printer".
  3. Click 'Next' in the Add Printer Wizard window.
  4. Select " printer local to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5. Under Select a printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. Under "Add Standard TCP/IP printer Port", enter the host name of the printer . You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. Now, select HP in the manufacturers list, select your printer from the printer model list and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler and click on "next".
  11. Click "next".
  12. Click "Next" and "Finish."

• My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.

  There is this bug on this problem:

  • http://Bugzilla.DownloadHelper.NET:8080 / show_bug.cgi? id = 642

  I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.

  Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).

  YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.

• My new airport does not detect my existing WiFi network, I can connect only via the LAN.

  Bought a new airport 1 TB TimeCapsule and I wanted to add to my existing via a WLAN network. It does not detect it and I can connect only via the LAN. What I am doing wrong?

  Unfortunately, unable to connect to a 3rd time Capsule part wireless using a Wi - Fi.

  You need to connect to the time Capsule to your existing modem/router using a wired Ethernet cable connection, permanent... like the Time Capsule Setup Guide illustrates.

  

  If you really don't want the time Capsule to connect using the wireless... she can do... If it gets a signal to another Apple wireless router. So if you were ready to add another Apple... as an AirPort Extreme router... and connect it to your existing Ethernet cable router/modem and configure AirPort Extreme to broadcast a wireless signal... .then.. .the Time Capsule would be able to connect in this way, assuming that he is where he can receive a good quality of AirPort Extreme wireless signal.

• Wk2 will not detect the HDD on Portege 3480CT

  Hi all, been tring this for 2 days now and I have no idea. I want to install win2k on 3480CT but the win2k installation does not detect the hard drive... It will detect WinXP, win98 detects...

  I have the latest version of the bios, I start to think win2k is in need of a driver for the reader, but I'm not finding.

  Help...

  As mentioned for install the W2k you n t need additional drivers.
  I also recommend the HARD whole disk formatting and delete all partitions.

  In addition, you must use an original CD of Microsoft W2k. I read on the net that some people wanted to use the copy of the CD W2k, but this CD is not bootable.

• Toshiba A300 PSAGCE battery not detected

  Hello everyone.

  I have a Toshiba Satellite A300 (PSAGCE) which worked well since I. Recently, he showed "battery not charging". I went to see what I could do and someone advised that I should update the BIOS. So, I went to the website of Toshiba and downloaded the update for my BIOS. I have install without problem. He now has the version 2.20. The problem of "battery not charging" had disappeared.

  I had a new problem: battery not detected!

  The battery worked well and he gave me 2 hours of normal use. Now, it is not "detected". I did everything I could think of. Do you have the BIOS reset (pressing on the WE / OFF button / stop for 30 seconds), I left it with the battery for a few days, etc...

  When I connect the battery, it shows an orange light for 5 seconds and he died later. I don't know what more I can do. I contacted Toshiba in my country without success. They have not yet responded to my email.

  Any ideas? I tried with another charger than computer shows the same.

  I have install as a program of "batterycare.net" and it shows that I have 1.40 hours of battery, but as soon as I remove the cable ca, the computer shuts down without power.

  I guess I won't be needing help... I flashed my BIOS with a lower version that I had (2.20 > 1.80) and now it does not start even upward.

  I'm kidding not things for good.

  Any changes to save it?

• Satellite A300 - S-video does not detect TV

  Dear all
  Last week, I bought your new product: Toshiba Satellite A300

  I liked its release specifications specially s-video.
  When I arrived at my house, I have it plugged into my TV:
  Bomba Toshiba 29A3MJ
  http://www.Toshiba-Gulf.com/site/product/prd_details.asp?prdid=1044&CATID=123

  I used S-Video/RCA cable:
  http://www.accessories-shop.NET/images/5FT_4_PIN_S-VIDEO_to_3_RCA_TV_male_Cable.jpg

  Then, I put the TV fashion which I usually use to another laptop.
  I kept clicking on Fn + F5 on the satellite phone without exploitation.
  Nothing has been posted on the TV screem.
  Before, I used to connect to HP Pavilion dv2000 in the same TV using the s-video and it worked fine.

  Please advice how to solve this problem.
  Best regards

  Hello

  Usually, this should work.
  Both devices must be OFF. Connect then the laptop and the TV using this cable.
  Turn on the TV and the laptop starts.

  If the use of the FN + F5 will not detect the image on the TV then I would recommend checking the settings in your graphics card properties.

  I put t know what graphics card you have, but my Satellite phone has been equipped with the Intel graphics card and I can change the settings in Control Panel-> Intel GMA graphics card.

  Maybe your laptop supports the ATI card. If these parameters were in ATI catalyst.

  PS: Check if you are using the latest version of the BIOS and the latest graphics card driver too.

• Pavilion dv2500: can not detect our connection to wifi PLDTHOMEFIBR (our own connection)

  Hello community of Hp.
  
  I have a problem with my PORTABLE HP PAVILION dv2500 PC.
  
  A few months ago, everything is ok.
  
  It can detect our wifi.
  
  then yesterday I just know that it can not detect our wifi at home.
  
  I mean that my laptop can detect our neighbors wifi. but it can not detect our own wifi.

  I already perform some troubleshooting method.

  the first thing I did.
  
  is that I perform a RESET of my modem.
  
  because I think that the IP of my laptop has been block by my modem.
  
  If, after that, it's the same. It can not detect our wifi.

  second is.
  
  I reformat WINDOWS Vista x 64.
  
  but it's the same thing.
  
  It can only detect our neighbors wifi. but our is not.

  last thing I did was to change the ip address of my laptop.
  
  but it did not solve my problem either.

  pls help me solve this problem.
  
  
  
  Thank you.
  
  and God bless you all.
  
  more power for the team of hp with this site.
  
  
  
  Please send me an email or comment here if you have an idea on how to solve my problem.
  
  [Personal information]
  
  Thanks again and best regards.

  Hi @BooJimBoo,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the HP laptop and wanted to help you! I looked in your question about your Hp Pavilion dv2500 Notebook and problems with the wireless connection. Try to reset the router. Wait 30 seconds before plugging and unplugging the router to make sure, it resets completely. Here is a link for troubleshooting wireless connection, if you need. Section I fell better help is the key to security is changed 3. To establish a new connection to the wireless network, return to the network sharing Center window, select set up a connection to a network.

  If the problem persists, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels. You can contact your Internet provider.

  Some say that this download will help fix this Microsoft Fix it.
  
  Here is a linkto help as well.
  
  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.