Toshiba A300 PSAGCE battery not detected

Similar Questions

• Equium A300D - 16 c - battery not detected after replacement

  I have an Equium A300D - 16 c. The original battery was shot while I bought a stack of real PA3727-1brs 12. I have put in the laptop, it seems to load, but in the corner, he always says no battery not detected even if its load on. When I leave the charger it says remaining unknown.

  I tried the usual stuff to go into Device Manager and uninstall control compliant apci and still he has not solved it self. I've also updated my bios to the newest one. I just wanted to know what could I do so I can see how much battery is left, and if the laptop can recognize I..

  Hello

  Is this a battery Toshiba of origin of an authorized service provider?

  Usually, the new battery should be detected after the first start, I recommend that you charge the battery while the laptop is turned off. Start the laptop with battery only and check if she recognized properly s.

• Windows7 HP Pavilion dv6 Notebook PC - battery not detected

  Hello

  I just bought a new battery, precedent is 4 + years.  During the installation of the battery in my status bar icon indicates it AC is powered, but the battery has a red cross on it.   When I hover over the icon it tells me "battery not detected."   I tried everything that the HP article for 'battery not detected' I found, but the recovery of the system.

  What are my options now?

  Robyn

  Problem solved... returned to the seller.

• Upgrade of Windows 10 - battery not detected

  Upgrade Windows 10 has left me with battery not detected laptop Aspire 5738. Already tried the reset of the coercive power, no luck. If I can't find a solution, I need to roll back to Windows 7 or be stuck with a portable desktop computer. Any ideas or suggestions?

  Thanks to Alfin72 in the Windows 10 forum for a solution that worked:

  'Please check if you can do a reset of the battery driver. Here are the steps: go to the currency manager. Windows with your left hand and hold and then press the key for the letter X with your right hand. Then select Design Manager in the list. Right-click on compatible ACPI Microsoft control method battery and choose uninstall. Click the ACtion tab on the top of the search window and chose any material changes. Let us know if you notice a change after following the steps above. »

  The solution worked great!

  I also ended up making a coercive power, then reset because it is now detected the battery but did not load. To do this, simply unplug everything (including the battery), power for 15 seconds button (you won't see anything happen), then reconnect and restart. After that windows will appear, give it another 30 seconds, then put battery back in. Now, it's all good!

• Qosmio G10-133 - battery not detected after upgrading to Windows 7

  Hello, I hope someone can help my frustrations here.

  In recent weeks, I successfully upgraded my laptop to Windows 7, an increase of memory to 2 GB, bought new power cord for laptop, new battery and resolved all the issues that Windows 7 has cast on me. The laptop and runs like one dream other than a question that seems to have had worse.

  The laptop no longer recognizes the new battery. (battery with a cross through it and a photo of current) For about a week after installing the battery, this has worked fine but now does not detect everything. I don't have any errors in Device Manager and windows recognized the ACPI etc battery inputs and has no problem. I also loaded the package of Toshiba value added that Windows 7 has found for me but still nothing. Battery not charge even though sometimes the battery works for about 30 seconds to start up if the battery is back removed and implemented, then stops again (once Windows loaded) I tried many things like the disabling of the driver, reinstall battery etc, but nothing. I tried the iniitally of battery with Windows XP and worked well.

  I have also searched the web and saw that many other laptops with Windows 7 have had this problem, including Toshibas. Some say update the BIOS, but Toshiba have not released an upgrade from the original in 2004 (which is for WIn XP Media Center), and there is no settings in my BIOS for ACPI etc.

  In addition, I can not calibrate the battery because I can't do anything with it. I don't think it's a question though.

  If anyone has any ideas I would really appreciate it or all the links to the drivers etc.

  If this is sorted my laptop should last for 5 years!

  Thanks for reading this.

  Dickie

  Hello

  First of all, I doubt that many other laptops equipped with Windows 7 have this problem. I've never heard of this and normally charge the battery will not be controlled of the OS. It happens automatically and your battery will be charged if the AC/DC is plugged. If the OS doesn't affect it!

  To be honest, I also don t know why your battery isn't detected, but what happens if you turn off the laptop and let the AC/DC adapter plugged in for 24 hours? After that, it should be possible to work on the minute of the battery for 1 hour or more.

  If this isn't the case, it seems to be a hardware problem, maybe the battery doesn t work correctly and should be replaced. You should contact the retailer where you bought

  By the way: some nice and interesting tips on battery:
  http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm

• Satellite A500 - 18Q - battery not detected after installing Windows

  I have Satelite A500 - 18Q (PSAR3E) and Windows 7 32 bit

  Windows is not detected battery. What should I install to the Windows recordnize the battery?

  Hi marnin,.

  Have you installed Windows Toshiba Recovery disk or normal drive of Microsoft?

  Normally for the battery you n t need an additional driver. He will be recognized automatically.

  Can you charge the battery when the laptop is turned off?

• Satellite A300 PSAG4A: Webcam not detected in Device Manager

  I have a Toshiba Satellite A300 PSAG4A 02L00M with Vista Home Premium 64-bit.
  The webcam is not working and it is not detected in Device Manager.
  When I install the Chicony camera drivers, I get the "Webcam driver open fail. Error message.

  The fact that I can't see the Webcam in Device Manager tells me that there may be a hardware failure.
  However, I hope that this is a setting that I can fix myself.

  I had restored the laptop to factory also and I've updated the bios.
  I tried to uninstall all the USB controllers and reboot the PC.

  Is there something I can do?
  It's maybe a software problem?
  There may be a setting?

  Best way to test the operation of the equipment is to check with the factory settings installation operating system with the Toshiba recovery image. As I see that you have done this already.

  So if cam still doesn't work properly, I fear that there is a problem with the hardware.
  It cannot be matter of software because the recovery image contains the driver for the cam.

• Battery not detected - any ideas

  I replaced the battery in my Toshiba Satellite A200 with a generic brand, but now my system says: no battery is detected. I want to know if the battery I bought is not good or if there is some setting etc. I have never implemented properly. Any ideas woul dbe greatly appreciated.

  Hello

  The battery is not the right or the computer has a power problem.

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Device Manager - Batteries - Double click on each item - tab drivers - update drivers
  (who can not do anything) - then do a right click and UNINSTALL-REBOOT which will refresh the driver
  Stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  =============================

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the yellow on box
  right side of the page to download the latest stable version. This utility provides excellent battery
  and load information

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Toshiba PX1396U - 3T 01 - not detected by PC

  Hi all

  I have a Toshiba PX1396U - 3T 01 1 to usb 2.0 external hard drive (food sector) that I bought in 2009.

  Recently, during transfer of files from the hard drive to another, the green copy to neutral bar. So, naturally, I suspected a loose connexionUSB. I canceled the file transfer, make sure the usb plug is correctly in the port and turn off the external hard drive.

  When switching on, external hard disk red light stays on for 1-2 minutes before turning blue and once it has turned blue, the disc is not spinning and the hard drive is not detected on the computer. I compared it with my toshiba 320 GB external hard drive (also supply by sector), its indicator turned blue immediately, and I can feel the spinning.

  What could be wrong my external hard drive and how to retrieve the files contained in it?

  Hello

  If the HARD drive does not turn upwards, I think that the problem that it related to the HARD drive itself. You can test it on another computer but if it s not turn not not the problem is the HARD drive in my opinion.

  I think you need to send the HARD drive to an authorized repair service provider. Guys can check your HARD drive and replace it with a new model if your HARD drive is still under warranty.

• Satellite A300d - new battery not detected

  I recently had a new battery PA3533U-1B SR / regarding my age Satellite a 300 d.
  When I put the new battery in the laptop, unplugged computer, press the power button, the Red battery light blinks several times, no power.

  When I plug the power to the laptop, the red light on the battery remains red as-if the load, once windows has loaded the battery shows as not detected.

  I have checked the connection and passed through Device Manager-uninstall/install, but came with no luck. It is the 3rd replacement battery, I had this company who have a very positive opinion. Is it my laptop or battery?

  I have a good battery minutes 20 faithful who recognizes all time and expenses without problem.
  If you could please help it would actually prevent me from going crazy, thanks in advance :)

  Hello

  I recommend you to keep the charge of the battery for a longer period if the time
  The battery is working correctly? I mean the laptop can charge the battery and no flashing red led is visible. Right? Well, it means that this laptop is OK!

  In such cases, it s battery related question keep the battery in a few hours or maybe day this helps if not, then I recommend you to get in touch with the retailer and ask another battery

• Re: battery not detected

  computer: hp pavilion g6

  Windows 7 32 bit

  My computer does not detect the battery.  I tried new batteries and batteries, I did the hard reset, I can't update the BIOS because I did find an update for this machine.  I made sure there is no dirt in the pins.  I have reset the BIOS default settings.  What is NOW?

  A lot of people, here's the deal.  It seems that a few screws have been protruding too far way from the holes in the battery compartment, preventing the connection of the battery.  Now, for a time after this discovery, the stack would be detected only part-time.  I think that it was a function of transport the computer and possibly have enough play in the compartment and then do not establish a connection.  The end, and to this day, the battery works as it should.  I'm still not sure why he only worked part-time for a while after the screw problem was initially discovered.

  Yes, we took the computer part to solve another problem. an overheating problem.  I put 'Arctic 5' compound on some components and blow up the computer outside air to a vacuum cleaner.  To this day the computer stopped not because of the heat.

  Yes, I know, the warranty is voided.  Well, the warranty was long since gone in the first place.  It's probably why I couldn't find an update of the BIOS of the computer.

• Battery not detected

  I'm having a problem with my Macbook Pro retina end 2013 of 13 inches, processor 2.4 GHz Inter Core i5 memory 4 GB 1600 MHz DDR3 Graphics Intel Iris 1536 MB software OS X 10.9.5 (13F1603).  The battery could not detected and when I run the diagnostic, the question is PPT01.  When I brought to the service center, they said the logic board failed in MRI and battery failed on the MRI.

  I'm looking forward to your reply if you in front of the same problem and the possible solution or the best thing to do.

  Advice of logic and batteries are not self-healing properties.  If you want a MBP operation, have them must be replaced.

  Ciao.

• Battery not detected - G505s.

  Hi all

  Long story short, the battery like play games regarding when it is or is not detected. If I plug in the charger before starting it tends to recognize the battery, but frequently when simply turn on the G505s it will detect just not the battery (I tried to see if it has been detected in the center of Lenovo solutions in addition to the battery meter, it wasn't). It works on battery, but it's incredibly annoying to have no idea how many fees is left.

  I just got this laptop yesterday and would appreciate any assistance. I've updated the BIOS firmware and am running Windows 8.1.

  I had exactly the same problem. I don't know why it happened, but I followed the steps below and the laptop is now detect the battery:

  Unplug the AC adapter / CC and stop the system. Remove the battery, adapter Plug and boot into windows. Uninstall Microsoft control method compatible ACPI battery tab battery Shutdown Device Manager, remove adapter, install battery, AC adapter / CC link. Now, turn it on and check.

• Battery not detected after Windows update

  Hello

  I own a HP Pavilion G series laptop and I have windows running on it 8.1. Windows just made me finish an update, after which it is not detecing my battery more. Initially, he says: "trendy but no charging current. That's why I shut down the computer, removed the battery and plugged in. Now, he said only: "no battery is detected.

  I should mention that I do not use the original supplied with the laptop battery. It's a long battery life that worked well until the update. Please note that I am not too good with computers.

  I appreciate any kind of help in this situation. In addition, please let me know if any other information is needed to help out me.

  Thank you

  Edit: Now, sound to pass the message between: "no battery is detected" and "trendy but no charging current.

  That of Emad,

  Welcome to the HP Forum.

  The updated patch is maybe not able to detect "non standard" battery you are using.

  You could try to use a Restore Point and affecting the system to a date before the update was installed.  In this way, the offending update will be deleted from your computer.

  Using Microsoft System Restore (Windows 8)

  Contrary to belief, you have a choice on the installation of the updates.   Windows cannot make you install updates on your computer.

  You can set Windows updates notification, so you can decide what updates are valid for your situation.  Many people choose this course as one that fits, even if it forces you to do a little more work.

  If you set the Windows updates to be notified

  • and you always create a Restore Point before you choose to install updates
  • and ONLY install you the important updates (never optional updates)
  • and you've read about the updates that you have any concerns at all
  • then, you may find that you have less long-term problems
  • Create a Restore Point create a restore - Win7 Point OR create a restore point Win8

  Click on the thumbs-up Kudos to say 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• S540 battery not detected in Windows 10

  Hi all

  Just upgraded to Windows 10, but I now discover that the new companion of Lenovo or Lenovo settings enforcement will not detect the battery. I installed the System Interface Foundation etc., but to no avail. Battery is being charged is more than 50%, but in full and is no longer detected at all.

  Have you seen this happen also?

  Good day and welcome to the community.

  Please see the discussion on this topic:
  https://forums.Lenovo.com/T5/Lenovo-apps/Lenovo-Companion-3-0-and-Lenovo-system-interface-driver/m-p...

  There are some issues. Until it is resolved, you can follow the recommendations of the someotherguy.

  I hope this helps.

  Kind regards.