Monitor is turned

Similar Questions

• Windows XP - monitor not turns off, power turns off after 5 minutes options the Auto value not

  sys is xp

  * original title - I can't disable the monitor in auto. power options are set to turn off monitor after 5 min, but it never turs of when I stop using the unit *.

  Hi jerryabts,
   
  -Which is the unit that you are talking about?
   
   
  Try to download the patch from the link below and install it to resolve this problem:
   
  The monitor may not turn off on a Windows XP-based computer even if you set the monitor to turn off after a period of inactivity

• Satellite L650-0ED - ports external monitor and turn off WiFi

  Hey,.

  1. I have a Satellite L650/0ED, I was wondering if the HDMI and the external monitor port start when starting and if they cause the start time of the laptop to be slower. If they do slow down the start how disable them you using Device Manager, since I looked, I tried to disable the Device Manager; but I can't find them anywhere on the list of devices.
  They have a special code name or something?

  2. based on my understanding, the manual of instruction/userguide Toshiba mentions if I press FN + F8 it turns off the wireless amber light but this is not the case, since the amber wireless is still or not. I have the wireless active or disabled.
  It say it's so I have the wireless off of amber or the - Orange must be turned off when I press FN + F8 and is not, why is this?

  Thank you

  Hey Buddy,

  1. No, they cause t a slower start. He doesn't know me and as long as I know it of not possible to disable the ports in the BIOS. Then n t you worry about this, even, you have connected external screens, boot time is the same.

  2. Yes, usually you can activate the WLAN functionality by using the FN + F8 key combination.
  I put t have the laptop in front of me, but normally if you don t have a hardware wireless switch, you can disable the wireless network adapter in the BIOS. Just put permits for disabled people and that should be all! :)

• Aero off when the external monitor is turned by Nvidia ControlPanel

  Please see subject
  Aero works perfectly when the office is developed for the 2nd monitor in normal mode.
  no work around?

  Post edited by: mhoffmann

  Sorry, I forgot to mention my hw: Satellite a100-02 b (geforce go 7600)

  .. and when I reboot Vista behaves a little bit strange.
  a few seconds, everything looks ok, but then it redefines the external monitor to 16-bit color and minimum Vfrequency (60 HZ)
  and a message appears that the 'Desktop Manager' was closed due to a problem.

  Maybe it's because...
  (1) it is an old CRT, not especially known (standard pnp driver)?
  (2) the ability of the graphics card vista is not sufficient in this configuration?

  I heard somewhere that there is a switch in the registry, which disables the dwm.exe test, if the material is
  able to support the aero technologies. What is a way to fix it?

  Hello

  I read about the registry hack that allows the function Aero Vista on graphics cards that are generally not able to manage the Aero feature.
  But I don t think that the modified registry key might help with this problem!

  In any case, I try to understand what you were doing on the laptop
  You have turned on the display on the second external monitor, then you have changed the position of the screen (you turn the display) and you tried to use the Aero on the external monitor.
  Am I wrong?

  Well, what to say, it s not easy to say if she s a problem or just a limitation of Vista Aero.
  I have never tested or used Aero after the display has been set at another position.

  I think you should test Aero on external monitor without rotation.
  Please also see this Toshiba knowledge base article on

  What are the requirements of Aero in Windows Vista?
  http://support.toshiba-tro.de/KB0/TSB7101O90002R01.htm

• I can't second monitor to turn on

  Original title: hardware device

  I have two monitors and recently moved to a new location.  After having reconnected all the components of the computer I can not get the second monitor turns.
  Under devices is shown only one monitor.  How can I get the second monitor to function.

  Hi, John,.

  Other than moving to a new location, what the changes to the configuration?

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=z_lURxeRDAy

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873

• Monitor not turns off when I close the lid!

  I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

  I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

  This is probably controlled by the power settings. Once you enter the power settings there should be an option something similar to 'change the closure of the hood '. There are probably several options such as sleeping, ect...

  You can download the manual in PDF HERE.

• Monitor keeps turning off

  Which caused my computer screen to turn off by itself, while I still use it? He returned after about an hour or two. Any suggestions

  Hello caprikus,

  Reinstall Windows Vista would be an aggressive measure to solve this problem. I suggest you contact Dell to check if the problem is caused by a faulty monitor. However, for your reference, you can have a look at the links that will give you information on how to reinstall Windows Vista below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  You can also backup data before you reinstall Windows. http://support.Microsoft.com/kb/971759

  You can find the version of the service pack installed on that follows your computer the steps below:

  a. Click Start or click search, and then click Run.

  b. type msinfo32 in the Open box, and then click OK.

  c. find your operating system next to the line of the name of the BONE.

  d. you should be able to find the service pack installed there.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• monitor caution turn off after 1/2 hour of use

  After that I'm on the computer for about 1/2 hour my screen goes black.  I then have to turn the monitor turned off/turned on but the screen just stays on for a few minutes.  It's as if there is delay.

  Make sure that "Turn off the display" is set to "Never" in Power Options. Citing Windows Help:
  "1. options of power opened by clicking the Start button, click Control Panel, clicking system and security, and then clicking Power Options."
  "2. in the Select a power plan , on the left, click choose when turn off display."
  If 'Disable the display' is already set to 'Never' and the problem persists, then try the monitor with another computer for a few hours in order to exclude that it is the fault of the monitor.

• my display on a monitor has turned 90 degrees, what should I do about it?

  Have turned off computer. the reboot. same thing. at the bottom of the screen is on the right side.

  Hello

  1. do you mean to say that only the task bar has been moved to the right or the full screen has turned 90 degrees?
  2. don't you make changes on the computer before this problem?

  The ability to rotate the screen image is a characteristic of your video card, press and hold the Ctrl and Alt and press one of the four arrow keys (up, down, left, or right) to correct.

• accidentally rested my elbow on the ancaused page of windows keyboard to rotate a quarter turn on the screen of the monitor/how turn this back?

  accidentally my arm has rested on the keyboard and caused the windows page rotate a quarter turn to the left on the screen, now I have to tilt my head to read. How do I turn it back?

  Press CTRL + ALT + left arrow or CTRL + ALT + right arrow. Boulder computer Maven
  Most Microsoft Valuable Professional

• Connection monitor to turn Inspiron 3847 U2713H

  I gave my daughter a tower Inspiron 3847 for Christmas with a monitor of U2713H renovated so that it could alter the photos. She struggles to find ways to connect the two devices with the cable supplied with the monitor.

  Does anyone know how to properly connect this monitor to this tower?

  Yes.

  If it is absolutely sure, this isn't HDMI and DisplayPort.

  I only have a DisplayPort and VGA on my Dell 3020, but my monitor's HDMI and VGA.

  EDIT: Looks like it is a HDMI and VGA on the 3847

• Properties dialog boxes appear in extended desktop monitor after turning off

  I used the Office expanded shortly to develop a data model. However, when returning on the single screen of laptop, maker of data continues to display dialog boxes in extended desktop monitor and therefore invisible.
  
  If anyone has experienced this problem and is it possible to disable this option.
  
  
  Thank you
  Etienne Piron

  Hi Eric,.

  For some of the dialog boxes, he remembers where the dialog box is displayed, and next time the dialog box is used, it tries to display the dialog box at the same place.
  This can result in the dialog box being invisible if it was previously displayed on a subsidiary monitor that is no longer connected.

  In this case, you can move the new dialogue box on the main screen as follows:

  1 attempt to open the dialog box.

  2. tap Alt space (this opens the dropdown of the invisible dialog box).

  3 M type (this selects the Move option in the drop-down below).

  4 use the left or right arrow key to move the dialog box. (Once you've started it, you will find that you can use the mouse to position the dialog on the screen.)

  You need only this time for the dialog box. Next time it is used, it must appear in the new location.

  David

• Somehow the image of the monitor has turned on its side. How do I retrieve the right way?

  My grandson has somehow hit a few buttons that straightened my montior image.  I can't understand how to change back

  Method 1:

  Press and HOLD on Ctrl + Alt keys > use the arrow keys (up, down, left, right) to realign the screen

  
  Second method:

  Right-click on the open office space > graphics > Rotation > try the options there data.

   

  Method 3:

  Do a system restore. Pick a date when the screen is in the normal position.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• AL1716 screen turns black after a few seconds. If I turn the monitor power off & on again, it works - 2s

  The monitor worked fine for a few years, so is no longer under warranty. I was about to throw.

  Then the monitor I bought to replace, was damaged on the way to the group practice site.

  Now, I hope to fix the Acer monitor.

  When the computer starts, and a new screen loads, the monitor it shows for a few seconds. Once the computer on the desktop, if I turn off the monitor and turn it back on, it displays the desktop perfectly for a few seconds.

  The monitor I replaced it with also works very well with the computer. He collided with another device, when the car in front of me stops suddenly and there is a piece missing from the screen in the lower left corner. It looks like modern art in the lower part with some of them white and black and a few vertical lines and horizontal lines. I can continue to use it, since what I need lies in the upper part of the screen. I learned the keyboard command to shut down the computer. The windows key, followed by the right arrow, followed by the Enter key.

  I watched a few videos for repair of monitor on Youtube.

  It seems that the capacitors are the typical element which spoils first.

  So I guess I'll break the front off the monitor and see if the card has the capacitors top of the pop up. I can use capacitors with the same intensity of micro-Farouk and the voltage equal or better than the other monitor.

  I've recently learned step secret beginning of successful welding.

  You must have a clean tip.

  When you clean the tip of the soldering iron, it should have the appearance of copper. If weld does not stick to the point, it is not clean enough. I used a wet sandpaper dry and scoured it. They are sold with a protective coating that must be removed. If it is not removed it clogging the tip.

• Monitor does not immediately turn on

  My monitor used to work properly and then, after going to sleep when not to use the computer for a given period, he (the monitor) would not go back. Pressing Ctrl-Alt-Del has worked for a short while then I had to turn on the monitor and turn it back on, then I had to wait several minutes before I could turn it back on, then I completely removed the duration of sleep, preventing the monitor go off leaving on until I is no longer needed on the computer or at the end of the day. After this point, start-up, the monitor would not come and I had to wait 2-3 minutes, turn off the monitor and turn it back and he would come. Then I had to wait 5 minutes, then 10 minutes, then an hour. The last time that I turned it on (and I left it on since) I've been waiting 12 hours.   Once the monitor is turned on, it works fine. So I don't think it's a fault with the monitor. So what - the?

  CPU: Intel Core i7 - 4770K @ 3.50 GHz

  Memory: 16,00 GB of Ram

  OS: Windows 7 Home Premium

  Help would be appreciated.

  MikeBravo07

  Your monitor may deteriorate gradually. The easiest method to check if you have a problem of monitor is to swap monitors. Alternatively, you can try to move your current monitor to another computer to see if the screen lights up immediately. Isolate the problem.