Router to prioritize the wifi for the PS4 single only

Similar Questions

• IM hang the wii to the internet I have a router linksys it krrps ask for a ssid or website can someone tell what or where help

  OK I have cable time warrner that the modem has only 1 spot for the big phone looking for thing, I went and bought a linksys router, now he wants something called ssid or password or some web please help

  Don't know if you still need help, but...

  The SSID is the name of your network.

  The password is the password to access the wifi connection.

  You can verify this information by accessing your router configuration.

  In addition, a laptop detects your wifi signal and identify your SSID.

• using the wrt54G as access point WiFi for iPod

  I have this Setup:
  (I'm in a trust of a larger network LAN].

  [Campus network: 192.168. *. *]
  ------------------------------
  |
  + [local switch]
  --------------
  |
  + various machines (in 192.168.10.xxx)
  + Pc1
  + pc2
  + ...
  + [Linksys WRT54G] (for WiFi)
  ----------------
  |
  +--> iPod
  + (4 other local unused ports)

  The WRT is configured in Bridge mode and all can see the Internet, but the iPod can not see the PC, unless they are connected on the subnet of the router.

  I think that in this configuration the WRT does DHCP and creates a subnet and then NAT for them to get access to the outside. So the inside can out, but outside may not participate. This means that the applications hosted on the PC iPod cannot interact with the WiFi iPod.

  I want the WRT to act as a bridge and be transparent to the local network & PCs.

  This seems to be a simple installation, but I couldn't sort through the DMZ, router, and help the other possible approaches?

  The answer is 'no '. As far as Linksys are concerned, a router is a router and an access point is an access point, it is because they have two very different functions.

  Concerning

  Fred

• Do you need to be on the same account of WiFi for phone and Mac that allows you to delete photos?

  When my Macbook Pro is on the WiFi and my iPhone 6 s + is on cell phone, I noticed that if I delete the photos within the program of Photos on my Mac they do not get deleted from my iPhone. However, a few hours later when I get home and check my phone, and I'm on Wifi for both devices, the photos have disappeared. Do you need to be on the same account of WiFi for phone and Mac that allows you to delete photos?

  Thank you.

  Devices can be on different wifi networks.

  Your question is that the phone will not be synchronized using cellular data and will wait until it connects to a wifi network, but this can be any wifi network.

• Laptop HP 15-r033TX: did not find the driver wifi for my laptop to windows 7 64 bit

  Hello

  I need help. I did find the driver wifi for my laptop for windows 7 64 bit. Can you send me a useful link.

  Thank you

  Hello:

  Here is the link to the wireless card driver you need...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131223-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0005

  You will also need the bluetooth driver...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1

• has fallen 6 Iphone in the Lake while on 4g. Were not on wifi for a few days. I lose all the pictures taken because I was on wifi or can I get back them some how?

  Hi, I dropped my Iphone 6 in the Lake while on 4g. Were not on wifi for a few days I've been away. I lose all the pictures taken because I was on wifi or can I get back them some how?

  If the phone doesn't work, settings/iCloud and turn on synchronization of Photos. Using a computer, you can go to iCloud.com and download them.

• Can someone guide me how disable or disconnect a specific user of WiFi for laptop user and Mobile WiFi user without the user's knowledge.

  Hi, can someone help me to disable a user especially wifi?

  Hello

  Can someone guide me how disable or disconnect a specific user of WiFi for laptop user and Mobile WiFi user without the user's knowledge.

  Because I gave the WiFi setting for the particular user who uses more bandwidth. So, I need to disable his WiFi without his knowledge

  I need help on this

  Thanks in advance

  Waiting for a good and simple suggestion

  Change the WPA2 password on your wireless access point and tell them what it is.

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Installation of the card WiFI for OptiPlex 960

  I would like to insert card WiFi for my OptiPlex 960. (Last time I looked inside I remember there was a slot for this).

  The card I have has a small connector, surrounded by orange in the picture, that I guess is for the antenna - is that correct?  If so, can make a point for part number for the antenna?

  Also, I guess I'm going to need drivers so help find much appreciated.

  Finally the card will work for 5g wifi?  (currently I use a 2G WiFi dongle

  Rather that to use this map of 2.4 ghz getting a double adapter usb 802.11ac wireless broadband.

  The solution is to use Wireless USB AC adapters that cost less than $20 each.

  AC600 DOUBLE BAND EIDEMAX EW-7811UTC units are less than $20 at my local Wal-Mart.  They work very well.  They are faster that my fios cable network is 100/100 meg and they get more Meg 80 forth on speedtest.net.

  

  https://www.Walmart.com/IP/32106870

• enquery for wireless router which has the support of UPnP2.0

  I am looking to buy a wireless router that has the ability to UPnP and conforms to the standards of the IGD 2.0. PL you can help me help what model of Linksys router has this feature built-in.

  Model of router E4200 of Linksys compatible 2.0 of the IGD.

• Will simply be to unplug router to restart the cause of the long-term damage it?

  my router Belkin had an option to plan restarts by choosing the days and times, and I would like something similar for my nighthawk ac2350 v2, to keep smoother things because I always reset my router sometimes when a device loses / reconnects wifi again and again. a simple reboot solves the problem for a few days to a week or more.

  in any case, I'm considering using a programmable electric timer to schedule a reboot twice a week, and my question is if I simply cut power briefly to restart it will cause damage?

  I mean cut the power supply of abruptly vs by pressing the power button on the router or do the reset through the interface of the router

  With the help of a timer is not a problem. Others do the same for several routers.

  EDIT: Basically the power button did the same thing. Just a cleaner way of cutting to a device power.

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• Use the second router to extend the network to Time Capsule

  I have a v7.6.7 running Time Capsule 1 TB and older airport. I'm hoping to add a second router in a new location, and I use an ethernet cable from the TC at the new router (TP Link Archer C5), updated to the latest version of the firmware. The IP address of the TC is 192.168.1.1.

  I have set up my router C5 as follows: allocation of IP 192.168.1.199, value DHCP = off, and I connect a cable between the TC ports and port WAN (not Internet) available on the C5. In the C5 wireless settings, I tried both using the TC SSID and pw and creating a new SSID and pw. In both cases, the network will work for a short time, but eventually the entire network, including the TC, stops working. I made no changes to the parameters of the TC on any trial.

  Is it possible to use a TC and a router not Apple on the same network? If so, what are the right settings for the TC and the secondary router? If not, is it better to have the not Apple as main router and add the TC to the network created by the non-Apple router?

  Is it possible to use a TC and a router not Apple on the same network? If so, what are the right settings for the TC and the secondary router?

  Yes. That would be the basis of a network of mobile type.

  The key for a roaming network parameters are:

  • The 'primary' router must be configured as a router. In other words, it must have active NAT and DHCP services.
  • All other routers used in a network of roaming must be reconfigured as a bridge.
  • All routers must broadcast a Wi - Fi network that uses the same network (SSID, aka) name, and the type of wireless security, and the password.
  • All routers must be interconnected by Ethernet. To provide Powerline adapters using an Ethernet connectivity should also work.

  If not, is it better to have the not Apple as main router and add the TC to the network created by the non-Apple router?

  Should not really which is the main in the roaming network.

  I think at this point, your current circuit line. To check that, I would suggest that you consider to bring back the router C5 in the same room as you have the TC. Then connect it directly to one of the LAN of the TC ports. Complete the entire upward to a mobile network and test it. If everything works, bring back the C5 in the desired location, and then try again.

  If it fails, then the circuit line will be tested to check that it provides a solid 'Ethernet' connection between the adapters.

• How can I set Up Airport Express with an existing router/modem from the ISP

  I have a wireless modem/router ISP and I want to get the ability to use Air Print using a non-Airprint but the USB printer. I suggest you to connect the printer to the Airport Express A1392 Epson) via a USB port to enable the AirPrint features.  However, I guess the Airport Express must be an ethernet to the modem/router ISP connection and then use the Epxress airport more convenient than my wireless router.

  Issues related to the:

  1. do I need to turn off the function the ISP router's wireless when I plugged as stated above? So I wait.

  2. as the Airport Express only has one ethernet port I assume that I can connect my other ethernet connections using a hub 4 ports connected to the Airport Express Terminal.  It will be always possible to use other ports ethernet on the modem/router ISP as well?

  Doug

  I have a wireless modem/router ISP and I want to get the ability to use Air Print using a non-Airprint but the USB printer.

  You may have received incorrect information, because a non-AirPrint on the USB port on an AirPort Express Terminal... or any other router from Apple also printer... do not make the AirPrint-compatible printer.

  You want to continue nevertheless to check that this is true?

  The AirPort Express can connect to the network wireless router using a wireless connection... or... it can connect to one of the router's Ethernet ports using a wired Ethernet connection.

  Wired connections are always preferable wireless if possible for your Express.  Turn off the wireless router is not necessary if you want to connect to the Express using an Ethernet connection.

• How to set up the PS4 with aircard years 790 and netgear dc112a to get the connection of type 2?

  Hi I have the Aircard 790s with Netgear DC112A router card, I tried to connect my PS4 to the router to get a connection of Type 2, but I could not, what I have done is I have my PS4 gave an IP address static, portforwarded all the ports by using the settings in the router menu, (I don't know if I should make the port forward in the menu hotspot and I don't know what I use IP: the IP Address of the router or the period of INVESTIGATION PS4?) , I put my PS4 on DMZ in the router menu, and put the router in DMZ in the menu hotspot, I disabled it Upnp. I get the connection of type 3 on the PS4, what I have to do?

  From a conceptual point of view, putting the PS4 in DMZ on the router and the router in DMZ of the hotspot should work. Try to remove all the rules of port forwarding and reboot the router and access point.

  There are two other methods to try that might work:

  1. Remove the PS4 DMZ on the router, remove port forwarding rules all and re - activate uPnP on the router. Keep the router in DMZ of the hotspot.
  2. If the card Aircard has IP Passthrough mode, try to activate it. This should ask interface the router WAN receive the public IP address of the Aircard map. This will remove a layer of NAT. Then simply bring the router to work using DMZ or port forwarding and uPnP.