Router VPN, where to place?

Similar Questions

• Static and NAT router to router VPN

  Hello

  I have two site VPN using routers. The VPN is fine, BUT - at the end of the seat, the customer has NAT entries static to allow incoming connections - any service that has a NAT static to allow incoming connections from the Internet is inaccessible in the same way. Ping, for example, doesn't have this problem because there is no static NAT entry. I tried to configure a route map-"No. - nat" according to the http://www.cisco.com/en/US/partner/tech/tk583/tk372/technologies_configuration_example09186a00800949ef.shtml , I thought I was working.

  H.O. has the IP 131.203.64.0/24 and 135.0.0.0/24 (I know, I know - I'm trying to change), and the R.O. 192.168.1.0/24.

  Bits of configuration:

  IP nat inside source overload map route SHEEP interface Ethernet0

  IP nat inside source static tcp 135.0.0.248 131.203.100.27 3389 3389 extensible

  (other static removed)

  Int-E0-In extended IP access list

  ip permit 192.168.1.0 0.0.0.255 any

  (other entries deleted)

  access-list 198 deny ip 131.203.64.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 198 deny ip 135.0.0.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 198 allow ip 135.0.0.0 0.0.0.255 any

  SHEEP allowed 10 route map

  corresponds to the IP 198

  1 remove the static entry for the specified host the VPN problem, but obviously breaks things :(

  2. as mentioned, the VPN itself works fine, I can ping hosts perfectly.

  Any help greatly appreciated :)

  Thank you

  Mike.

  You must use the option of the route to the static NAT map. This is a new feature in 12.2 (4) T according to this page:

  http://www.Cisco.com/univercd/CC/TD/doc/product/software/ios123/123cgcr/ipras_r/ip1_i2g.htm#1079180

  He must do exactly what you want. The old, another way to do is use "The thing", where you create a loopback interface and don't make a nat interface and use routing strategy for routing VPN traffic to one address on the same subnet as the loopback interface, but not the address of the loop. IOS then that réacheminera traffic to the real destination (in this case the remote VPN site), but since now it is not a 'ip nat inside' interface, the static nat translations does not apply and the VPN traffic will not be translated. The problem with this solution is that all loopback traffic is switched to the process, so it is a bit of a hack, but these things are sometimes necessary.

  HTH

• I've never burned a cd before. Where to place the two dics-original vs white one - in my lap?

  ORIGINAL TITLE: I want to ask a question in the section "help", 'Jamal' how can I do this?

  Hey Jamal - I've never burned a cd before.  Here are the? : where to place the two dics-original vs white snap my tour?

  Hello

  Jamal could not see your question.

  Most system manufacturers have online help on their site with specific instructions on the actual
  equipment in their systems and provided programs (several include 3rd party programs
  to help burn the CD and DVD). Also check with their forums where others have the
  same or similar models.

  ---------------------------

  Burn a CD or DVD in Windows Explorer
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  ===============

  Burning a CD
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/burn-a-CD

  Disc burning: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Disc burning tips
  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-tips-for-Windows-7

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

  Format a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows7/format-a-CD-or-DVD

  Burn a CD or DVD in Windows Explorer
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Change settings for burning a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Center

  Burn a DVD-video using Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

  Close or finalize a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows7/close-or-finalize-a-CD-or-DVD

  ----------------------------------

  ImgBurn - free
  http://www.ImgBurn.com/

  ImgBurn - Forums
  http://Forum.ImgBurn.com/

  Excellent Forum for help with programs and CD/DVD problems
  http://Club.myce.com/

  Free Windows CD DVD burning software download list
  http://www.techmixer.com/free-Windows-CD-DVD-burner-software-list-download/

  20 Freeware for Windows 7 DVD burning applications
  http://www.learnthisblog.co.cc/2009/11/20-freeware-DVD-burning-application-for.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Where to place the sequence inhabitants in a setting of the sequence? up, down, left, right?

  Hello

  I have a sequence with multiple images and I need overgive of some values in an image to the image through sequence inhabitants.

  Where should I put the local sequence? On the top or bottom of the frame? Perhaps on the right?

  If I put them on the right side of the frame wiring looks good in one but it's ugly as part of another.

  How are you?

  Greetings

  Johannes

  Hi Johannes,

  Although this is not necessary, it is better programming practice.

  You might need to make changes in the future, or to use the code in another, similar project, then its way easier to implement when you used a before state machine. And this isn't a lot of work changing a sequence to a statemachine, except that you have hundreds of frames/States.

  Back to your first question, it depends on your taste where you place the tunnels in the sequence.

  Christian

• Route VPN site to site on one path other than the default gateway

  I want to route VPN site-to-site on one path other than the default gateway

  ASA 5510

  OS 8.0 8.3 soon

  1 (surf) adsl line interface default gateway

  line 1 interface SDSL (10 VPN site-to-site)

  1 LAN interface

  What's possible?

  Thank you

  Sorry for my English

  Here is the assumption that I will do:

  -Your IP SHDL is 200.1.1.1, and the next hop is 200.1.1.2

  -Your LAN-to-LAN ends on this interface (interface card crypto SHDL)

  -VPN peer 1 - 150.1.1.1 and LAN is 192.168.1.0/24

  -VPN peer 2 - 175.1.1.1 and LAN is 192.168.5.0/24

  This is the routing based on the assumption above:

  Route SHDL 150.1.1.1 255.255.255.255 200.1.1.2

  Route SHDL 175.1.1.1 255.255.255.255 200.1.1.2

  Route SHDL 192.168.1.0 255.255.255.0 200.1.1.2

  Route SHDL 192.168.5.0 255.255.255.0 200.1.1.2

  Hope that helps.

• Router VPN 3005 and 7500

  Hi all

  Could you someboy help me on that?

  I have a network like this:

  Internet Internet

  | |

  router VPN - 3005

  |

  Internal

  I can set up Lan to Lan VPN 3005 and other PIX aside, but I can't ping internal network with the back of my internal network. I've already put the static route to the subnet of setbacks in the router and my subnet route internal VPN. What should I do? Thanks in advance.

  Banlan

  in fact the 3000 can do a ping will depend on your network-lists / lists access so that my not be a relevant question.

• IOS router + VPN + ACS downloadable IP ACL

  I want to use the function "Downloadable IP ACL" 3825-router VPN (OI 12.4 T) in combination with a CBS.

  In many documents and discussions, I read that it is possible to use the DACLs on "devices Cisco IOS version 12.3 (8) T or higher.

  Authentication and authorization by the AEC works and the device gets some settings of the av-pair-feature.

  I have tried several things to apply the DACL as the use of av pairs or ACS "Downloadable IP ACL" function, but nothing works.

  In the debug log, I see that the av pair is transmitted to the device, but it is not used.

  --> Can you tell me, is it possible to use the DACLs on the IOS routers?

  --> How does it work? What can I change?

  --> Is there a good manual to apply it?

  Thanks for your help!

  Martin

  It would be useful to know the PURPOSE of what you're trying to do...

  AFAIR client config mode requires no ACL for filtering short tunnel split ACL... and I have no way to test right now.

  If you want to allow or not some clients access to certain subnets why not investigate tunneling ACL and vpn-filter in combination with ACS split will rather than for the DACL.

• Unusual routing VPN configuration

  Hi, I use a PIX 525 to our main site, and one of the remote sites using a router in 1721. The 1721 connects to the LAN. All traffic is forced to use a virtual private network between the remote sites and main. The intention was to force the internet traffic from the remote site through the filter of content on the main site, rather than use the split tunneling to leave straight out to the internet through their DSL connection.

  The problem is that, of course, internet traffic this VPN comes back the PIX, Internet. Our content filter reflects the way of the switch connected to the internal interface of a PIX.

  I need to find a way to route VPN traffic from the remote site to an ethernet on the PIX interface which will be connected to our switch stack. If I can do this without breaking the VPN, traffic should be filtered on the main façade and through VPN to the remote side.

  Yes, you're pretty much toast unless:

  you choose to configure a web proxy to Headquarters and set up remote PCs to use it. In this way, they use a proxy that is located behind the 8e6.

  Same pix os 7 will not help, as all nat occurs on this topic - just remote communication will flow through the pix, never hit its physical interface or internal switch ports inside and so the 8e6.

• Where to place the javascripts for break-in PremierePro CC2014?

  I have some javascripts linking in the ExtendScript Editor, but does not know where to place them in the folder first for access structure.

  I wrote several for AfterEffects, some that can be called via the options to run the Script and others that involve a user interface panel and can be started by the user of the AE app.

  How do both of those, within the first? I'm * not * interested in signing, extensions, c ++ plugin to do this, if we can always do as with AE (which had a file that you deleted the Script of the Panel in and it worked for all users on all connections, which is important since the plugin should work for people who may not yet have registered in the machine).

  There is no equivalent mechanism in the body. Also, those who are ExtendScripts, not JavaScripts.

  ~/Documents/Adobe scripts Scripts can be executed in the body (from the command line, for example) without any security warning, unlike the .jsx files from other directories.

• you attempt to add a web form of Business Catalyst to my site Web of Adobe Muse (via insert html) and the shape is cut all the content below where to place the html area.

  You attempt to add a web form of Business Catalyst to my site Web of Adobe Muse (via insert html) and the shape is cut all the content below where to place the html area. I tried the basic troubleshooting and it's only when I insert a form of Catalyst Business that my web page is cut, where is the bottom of the form. I use this code when you insert form BC in Muse,

  "< div class ="bulletin of information-form"> < form name ="catemaillistform58787"onsubmit ="return checkWholeForm58787 (this)"method ="post"action =" http://theincitejournal.BusinessCatalyst.com/CampaignProcess.aspx?ListId=53681& OPTIN = true & PageID = / index.html"> < div class ="form"> < div class ="item"> < label for ="CLFullName"> full name < / label > < br / > < input class ="cat_textbox_small"type ="text"name ="Full name"id ="CLFullName"maxlength ="255"/ > < / div > < div class ="item"> < label for ="CLEmailAddress"> E-mail address < / label > < br / > < input class ="cat_textbox_small"type ="text"name ="EmailAddress"id = '" "CLEmailAddress" MaxLength = "255" / > < / div > < div class = "item" > < label > Enter Word verification in box below < / label > < br / > {module_captchav2} < / div > < div class = "item" > < input class = "cat_button" type = "submit" value = "subscribe" id = "catlistbutton" / > < / div > < / div > < script type = "text/javascript" src = "http://theincitejournal.businesscatalyst.com/CatalystScripts/ValidationFunctions.js" > < / script > < script type = "text/javascript" > '

  The only settings I did took the H3 header on opt-in and page navigation after the action to get rid of the opt in BC function as default. I tried to download the source code as well and I'm having the same problem. The web Page is here " copy " and a version of what I was creating the page to look like here is ' home ' As you can see, the 'House' version allows me to scroll past where I would have placed the shape box while the 'copy' stops at any user to parade before. I have called the shape slightly from the "development" of British Colombia under the style sheets tab and still tried to trouble shoot and get rid of the code to see if it affects something and it did not add style. For some reason only the HTML to the form is but I cannot understand what the section of the code would do that. Any ideas?

  I see that you have inserted a script tag open that you forgot to close, which generates errors on the page and prevent it from be returned correctly. You should ensure that the code that you insert in the Muse is syntactically correct.

  

  - Abhishek Maurya

• Where to place the DBC file in jdeveloper 10g

  Where to place the DBC file in jdeveloper 10g...
  
  I do not see any folder of dbc files
  
  Published by: Rashmi Gupta on November 23, 2011 02:26

  Hello

  This Jdeveloper won't work for the development of the ofa and personalization, you must download a Jdeveloper separated by this requirement, so please read the note I mentioned in the previous quote in metalink and to download the compatible Version of Jdeveloper, depending on the version of your application in which oracle you make customization or development. The note will have an adjacent link to the version from here, you can easily download the Jdeveloper, it will be around 600 MB in size.
  If you can share your exact version apps, we can tell you the correct version of Jdeveloper, but reading that not in metalink will be useful for you.

  Thank you
  Pratap

• 5 routing VPN site

  Hi all

  I threw myself little in this project without a lot of lead in.  Basically, we have 5 sites

  Site A: HQ with ASA 5520

  Site B: Remote with 5505 with L2L at Site A

  Site C: Remote with 5505 with L2L at Site A

  Square D: distance with 5505 with L2L at the Site

  Site E: Remote with 5505 with L2L at Site A

  In an emergency, I had to get phone running systems when a T1 PTP line was cut at the beginning by the customer! I created a VLAN on each phone named 5505 and created the Tunnels of VPN L2L all return to the HQs 5520.  Everything was good in the neighborhood, phones were talking about main PBX server to HQ, we could compose and in no problem.  The problem is now the phone Vender tells us that we need routing between each site. We cannot compose between each remote site without using external number (whereas before you dial internal extensions in order to reach all other sites)

  Site B needs to talk to the PBX to C, D and E (A, obviously as well but that is already at work) and so on.

  I found topics dealing with 2 remote sites requiring a routing, however, with 4 that all need to routing to the other configs will very quickly very vast and complicated.  There is already extra virtual private networks to of the HQ 5520 who go elsewhere and a good amount of security configurations, so the config is already pretty decently sized.

  Is there a better way to do this, or should I start to write my setups now?

  If I understand your question, you need to configure a list of VPN networks on each VPN Ray and the hub.

  For example on the RADIUS B a crypto access list that is similar to:

  ip-> A B permit

  ip-> C B permit

  ip-> D B permit

  ip-E > B permit

  corresponding Cryptography ACL on the hub for talks would be like:

  IP-> B to allow

  IP C-> B permit

  allow the ip D-> B

  E-> B ip license

  Repeat for each Department accordingly.

  So basically your configuration crypto would ' t grow, only the ACL crypto.

  You can work with groups of objects to simplify the ACL crypt, in this case:

  Crypto ACL on Hub B:

  object-group VoIP-dst

  object A

  object C

  object D

  object E

  object-group VoIP-src

  object B

  permit ip src VoIP VoIP-dst

  And so on...

  Just make sure your config allows same-security-traffic intra-interface

• modem router VPN hardware firewall - config possible?

  We have 2 remote employees having difficulties with their VPN client software turn off/on.  We were preparing to spread the VoIP phones up to them and won't open our internal PBX network.  I would like to make 1 stone 2 strokes by providing a hardware VPN to each employee to establish a gateway 2 IP Sec VPN gateway between their home and the main office.  This should provide a more reliable connection and throughput high, all allowing the VoIP phone to connect through the VPN tunnel, thus keeping our secure internal PBX.  So far so good.  From what I can tell the rv120w, rv220w or cisco asa 5505 would do the trick.  Now the difficulty - I don't want any personal traffic (Netflix streaming, whatever) from home, traveling through the VPN tunnel.  So I would like to allow the employee maintain their own network staff, and within the personal network the hardware VPN device providing a secondary network would use the VPN tunnel.

  It would look like this:

  Web:

  wireless router: (dynamic public IP 192.168.1.x private subnet)

  personal computer

  laptop

  television network, etc.

  hardware VPN device: (192.168.1.1 IP WAN, private subnet 192.168.2.x), IPSec VPN tunnel to the main office (must use internal DNS main office)

  Phone VoIP (192.168.2.1)

  Desktop computer (192.168.2.2)

  Seems simple to me, but concerned about through two NAT.  Looks like this would be preferred for a desktop home configuration that shares a single internet connection.  Found an old Cisco product that was aligned to this specific scenario - the Cisco VPN 3002; but it is the end of life.

  I'm also a bit wary of different routers Cisco RV line poor consumer reviews.  Whereas the Zyxel Zywall USG 20 as an alternative.

  The split of RV120 and RV220W site-to-site VPN tunnel support, so all traffic "cluttered" would remain local for home networks while the VPN traffic that's exactly right.

  You can consider installing one of the routers listed above in areas home to avoid the double-NAT or additional purchases. The VPN device does not practice given that the expense of a gateway to gateway VPN router is fairly inexpensive.

  -Tom

• ASA-to-router VPN, private, public

  I have a setup where a customer will send calls to a Complutense University of MADRID, from a private address, through a VPN tunnel Terminal to a 2811. The call to hit a SBC that caters to the public and is located just behind the router on FE0/1. (See photo)

  Traffic through the ASA is to be exempted from NAT.

  Since it is all public on my end and my waypoints by default for the router of my ISP, I guess I don't have anything other than a default route. (I'm not under routing protocols - just a static outgoing route)

  The tunnel does not come to the top. In fact, I never see that no traffic hit my side in all. Does anyone have experience making a private VPN, or know an example of config anywhere?

  This is my Bill at the end of the config:

  crypto ISAKMP policy 4

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  lifetime 28800

  ISAKMP crypto key XXXXXXXXXX address (public #1) No.-xauth

  Crypto ipsec transform-set esp-3des esp-md5-hmac XXXSET

  XXXMAP 4 ipsec-isakmp crypto map

  defined by peers (public address #1).

  Set the security association idle time 3600

  game of transformation-XXXSET

  PFS group2 Set

  match address 170

  access-list 170 permit ip host (public address #3) 10.0.0.5

  interface FastEthernet0/0

  IP (public address #2) 255.255.255.252

  load-interval 30

  Speed 100

  full-duplex

  No cdp enable

  card crypto XXXMAP

  service-policy output AutoQoS-policy-UnTrust

  Thank you

  Paul

  Your configuration looks very good.

  Phase 1 comes up when you try to pass traffic through? "cry isa to show her.

  Back P1, P2 comes up? "See the crypto ipsec his | I ident | SPI | BA | desc ".

  If none is coming, run a debugging:

  debugging cry isa

  debugging ips cry

  See if the tunnel is initiated when traffic is sent. As long as you have a default route pointing outgoing and don't have any other way, you should be fine. Looks like everything will be a connected network.

• Connect to fails Internet when VPN is in place

  Hello

  Can someone please help me to identify the causes of this. I have configured the VPN tunnel successfully, but I'm not able to browse the internet from LAN. I use the cisco 877 router. ACL 105 controls VPN traffic. But according to the theory, other traffic must go through the default gateway, but this isn't the case. Can you please help me fix this problem.

  Building configuration...

  Current configuration: 2344 bytes
  !
  version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname Ringwood
  !
  boot-start-marker
  boot-end-marker

  !
  No aaa new-model
  clock timezone WAS 10
  summer time clock AEDST recurring last Sun Oct 02:00 last Sun Mar 02:00
  !
  !
  dot11 syslog
  IP cef
  !
  !
  DHCP IP use connected vrf
  DHCP excluded-address IP 192.168.25.1 192.168.25.50
  !
  IP dhcp RINGWOOD pool
  network 192.168.25.0 255.255.255.0
  Update dns
  192.168.0.10 DNS server 139.130.4.4
  router by default - 192.168.25.1
  Rental 7
  update of arp
  !
  !
  name of the IP-server 139.130.4.4
  name of the IP-server 203.50.2.71
  inspect the name firewall tcp IP
  inspect the name IP firewall udp
  inspect the name IP firewall rtsp
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  crypto ISAKMP policy 2
  BA aes 256
  md5 hash
  preshared authentication
  Group 2
  encryption isakmp D19 * b & 5901 - key) @ address 0.0.0.0
  !
  !
  Crypto ipsec transform-set esp ENDLESS - aes 256 esp-md5-hmac
  !
  map Ringwood_Lynbrook 1 ipsec-isakmp crypto

  defined peer 0.0.0.0
  transformation-ENDLESS game
  match address 105
  !
  Archives
  The config log
  hidekeys
  !
  !
  !
  !
  !
  ATM0 interface
  no ip address
  No atm ilmi-keepalive
  PVC 8/35
  aal5mux encapsulation ppp Dialer
  Dialer pool-member 1
  !
  DSL-automatic operation mode
  !
  interface FastEthernet0
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  interface Vlan1
  IP 192.168.25.1 255.255.255.0
  IP helper 192.168.25.1
  IP nat inside
  inspect the IP firewall
  IP virtual-reassembly
  !
  interface Dialer0
  MTU 1460
  the negotiated IP address
  NAT outside IP
  IP virtual-reassembly
  encapsulation ppp
  Dialer pool 1
  Dialer-Group 1
  No cdp enable
  Authentication callin PPP chap Protocol
  PPP chap hostname theend10 @.
  password PPP chap 0 2133
  card crypto Ringwood_Lynbrook
  !
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 Dialer0
  !
  !
  no ip address of the http server
  no ip http secure server
  The dns server IP
  !
  interface Vlan1 source journaling
  access-list 105 allow ip 192.168.25.0 0.0.0.255 192.168.0.0 0.0.0.255
  Dialer-list 1 ip protocol allow
  !
  !
  !
  !
  control plan
  !
  !
  Line con 0
  no activation of the modem
  line to 0
  line vty 0 4
  password g00se
  opening of session
  !
  max-task-time 5000 Planner
  NTP 128.250.36.2 Server
  end

  Thank you

  Siva.

  You shouldn't have a problem with that.

  When you add controls and try to access Internet from 192.168.25.0/24 where the traffic is going?

  Check "sh ip nat trans" to check if there is a translation that is built for your machine and do a traceroute to see how traffic.

  The new configuration should not be a problem, if problems persist, please report it again.

  Federico.