Routing/NAT does not not on SAA with anyconnect

Similar Questions

• Wireless printer Lexmark X 4850 and a netgear router that does not connect while I can print

  Rookie PC user...

  I have a Lexmark X 4850 wireless printer and a netgear router that does not connect while I can print ggggrrrr....!
  I checked all plugs and connections, the reboot several times and am about to throw it out the window... Help!

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like the wireless Lexmark X 4850 printer is not to connect to the wireless router.

  Visit this link that should help you with this problem.

  http://support.Lexmark.com/index?page=content&ID=FA697&locale=en&UserLocale=en

  Note: Using third-party software or the link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software, or the link is at your own risk.

  If this fails to resolve the problem, visit this link and read "need help?"

  http://www1.Lexmark.com/us/en/view/printers%20&%20MultiFunction/Lexmark-X4850/CATID=cat170005-category&prodId=4145-product

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• NAT does not work

  Hello

  NAT seems not to work on my pix.

  I checked my config n-times. No question :(

  Please is - can someone check my config and tell what is the problem? and thanks in advance.

  I have a modem DSL (Siemens) working as a default router (x.x.16.17)

  Here is the config (x and are the same everywhere in the script)

  6.2 (2) version PIX

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate 7PmXr29jODRJ.eaI encrypted password

  7PmXr29jODRJ.eaI encrypted passwd

  tita hostname

  domain any.net

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  names of

  access-list inside_access_in allow icmp a whole

  inside_access_in ip access list allow a whole

  access-list outside_access_in allow icmp a whole

  interface ethernet0 10baset

  Auto interface ethernet1

  ICMP allow all outside

  ICMP allow any inside

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside x.y.16.18 255.255.255.248

  IP address inside 192.168.22.2 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 192.168.22.5 255.255.255.255 inside

  history of PDM activate

  ARP timeout 14400

  Global (outside) 10 x.y.16.19 - x.y.16.21 netmask 255.255.255.248

  NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route outside 0.0.0.0 0.0.0.0 x.y.16.17 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  Enable http server

  http 192.168.22.5 255.255.255.255 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  No sysopt route dnat

  Telnet 192.168.22.5 255.255.255.255 inside

  Telnet timeout 5

  SSH timeout 5

  username password of samir. Encrypted KnHwytEP2k92JAD privilege 15

  Terminal width 80

  Cryptochecksum:abd0f7a4e9339ff5026a3c5c9234cfa1

  Try just of Polo to the outside, using the interface:

  "global (outside) 10 interface.

  and get rid of your other global declarations (might have to remove the "nat (inside) 10 0.0.0.0 0.0.0.0 0 0 ' first or the pix could complain, I forgot).

  "I have a modem DSL (Siemens) working as a router by default (x.x.16.17)

  "Here is the config (x and are the same everywhere in the script)"

  Hereby you mean that the ADSL Modem is also a router? or is your ISP's router x.x.16.17 and they gets you a block of IP addresses? If this is the case, then the ISP router must know to get your addresses using NAT to the PIX.

  The trace of icmp shows that the PIX is originating and pings are extinguished as one of your NAT pool addresses, but he won't return. So I really think that your router upstream does not know to send packets to your NAT addresses to your PIX address. If PAT interface work, then that will be displayed exactly that, because the PIX knows to y to answer because it is addressed to him. But the NAT addresses are not directly on the PIX, they exist on this subject and the PIX knows what to do once she gets them, but they must be routed to it.

  -John

• Routing model does not. ADR 3.0.2

  Well, autoREST rocks just so as to define the modules using templates {URI} developer view REST in SQLDeveloper. However, model routing does not work even with simple routes like Hello /: name or Hello /: name?. Indeed, the first case we generate a null 500 Server error while trying to download the module and the model must be removed manually from ORDS_TEMPLATES, otherwise the entire module becomes useless and view developer REST refuses to connect to the schema. Any help will be be appreciated. Thank you

  Try other examples like that of http://blog.cdivilly.com/2015/03/12/ords-3.0.0-rest-plsql-api/ made me understand where is the problem: with a simple "/" as the uri (or a vacuum in order to keep the shorter paths) for the module causes all the issues I have outlined above. Using another model as /api/ seems to work fairly well...

• Update of Firefox 4. Realize some websites does not yet work with FF4. How/where can I download the older version of FF?

  Update of Firefox 4. Realize some websites does not yet work with FF4. How/where can I download the older version of FF?

  ^ Why post if you don't have the answer to the question?

  You can get Firefox here 3.6.16.
  
  http://www.Mozilla.com/en-us/Firefox/all-older.html

• computer HP laptop, 2000 does not recognize tv with a hdmi cable

  my computer hp laptop 2000 does not recognize tv with an hdmi cable.  I get the error "does not recognize any other monitor" when I try to "detect".

  I have recently upgraded to windows 8.1

  I have the graphics card AMD Radeon HD 6310

  The TV is a Phillips HD TV hotel.

  My game system works using VGA cable

  Any help would be greatly appreciated.

  Hi Ringerbell,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop HP 2000 and connect an external TV tuner. Here is a link to connection and external display. Here is a document onthe configuration ofyour laptop to use the monitor.

  Hope this helps you.

  Thank you.

• Windows Vista does not start upward, with success since the closure complete

  Hello world

  I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.

  I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".

  So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.

  Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.

  Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.

  If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.

  Thanks in advance!

  Hello

  4-5 hours to do a startup repair is too long.

  Often you get better results if you a using a DVD of Microsoft Vista startup repair.

  Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Why lately company does not release smartphones with screens 4 inches?

  Good evening!

  Why lately company does not release smartphones with screens 4 inches? Me as a person with small hands, it is very difficult to work with models even 4.3 inches.

  Now, I have Sony Xperia P. Very comfortable: fit to display me size metal case. Everything is fine except for the inserts in plastic (lower part). Shabby paint with these pads. Now, the phone looks not very nice. So I thought to change towards a new model. Because the phone close to 3 years.

  Expected to soon release a smartphone with a diagonal of 4 inches? (And in a metal box).
  Thanks in advance for your answer.

  Hi Valeria! You can share your suggestions on the Sony Mobile community here. Thank you!

  If my post answered your question, please mark it as "accept as a Solution.

• What are the causes of media error does not exist, even with the inserted disc

  I have a video project of 2 h I want to put on a DVD in NTSC format.  I get a msg of error 'Media does not exist', even with the DVD inserted in the drive.  I checked "Fit content to the space available.  Is the hr project 2 too long to compress the DVD, or are there other possible causes?  I have made a project of 1 1/2 hours without any problem.  I have a lot of hard disk space.

  Download orders

  What version of Premiere Elements and on what operating system works - it?

  The problem is the disc in the tray of the burner not recognised by Premiere Elements. Another frequent related issue is location of burner: burn dialog is empty when the Premiere Elements does not recognize the burner.

  In the problem that you have.

  have a. you tried other brands/types of DVD discs?

  b. If you start a new project and take the new timeline content DVD-video to DVD disc, the problem remains the same?

  B. have you tried to uninstall / free program ccleaner cross / reinstall with antivirus and firewall disabled?

  If you are in a time crunch, you should consider burning the chronology contained in the record and then taking the the VIDEO_TS folder

  recorded in a program like ImgBurn for DVD-VIDEO on DVD production.

  Please check and review and then provide you with the way to details. Looking forward to your results.

  Thank you.

  RTA

• Adobe Reader does not automatically associate with PDF files in Xp Sp3

  I reinstalled drive (twice) and it does not automatically associate with PDF files.

  How can I solve this problem?

  Cheers, JH

  Problems with file associations? If so, right-click on

  a PDF icon, choose Properties, one

  d change the reader in the open with box.

  Additional line breeze kindly provided by the software of this site.

• Query does not get scanned with Explain plan index

  Hello
  I have a table with Index XXQP_SAMPLE_N1 in PROCESS_FLAG column. When I run the query below and see the plan to explain it, this table is to get access full table (with red color in Toad). It's not scan with the index. I also analyzed the table with command below. can anyone tell why he does not get scanned with index?
  
  exec DBMS_STATS.gather_table_stats ('XXQP', 'XXQP_SAMPLE', estimate_percent = > 30, cascade = > true);
  
  SELECT
  *
  Of
  XXQP_SAMPLE
  WHERE
  process_flag = 1;
  
  Thank you

  the number of records in the table to satisfy the condition process_flag = 1

  I wrote a little note on this topic. Reade case 1. It may be of your interest.

  http://karthickarp.blogspot.com/2008/12/it-is-often-asked-why-SQL-is-going-for.html

  Published by: Karthick_Arp on April 15, 2009 01:41

• Client VPN router IOS does not connect

  Hi all

  I'm having some trouble of Client VPN connection over the internet to our Cisco IOS router. Some help would be very appreciated!

  On the VPN client log I get the following error messages:

  ---------------------------

  ...

  573 16:32:13.164 21/12/05 Sev = WARNING/2 IKE/0xE3000099

  Size invalid SPI (PayloadNotify:116)

  574 16:32:13.164 21/12/05 Sev = Info/4 IKE/0xE30000A4

  Invalid payload: said length of payload, 568, not enough Notification:(PayloadList:149)

  575 16:32:13.164 21/12/05 Sev = WARNING/3 IKE/0xA3000058

  Received incorrect message or negotiation is no longer active (message id: 0x00000000)

  ---------------------------

  We get debugging on the router that I'm trying to connect:

  ---------------------------

  router #debug isakmp crypto

  ...

  21 Dec 16:32:16.089 AEDT: ISAKMP (0:0): received 203.153.196.1 packet dport 500 sport 500 SA NEW Global (N)

  21 Dec 16:32:16.089 AEDT: ISAKMP: created a struct peer 203.153.196.1, peer port 500

  21 Dec 16:32:16.089 AEDT: ISAKMP: new created position = 0x678939E0 peer_handle = 0 x 80000031

  21 Dec 16:32:16.089 AEDT: ISAKMP: lock struct 0x678939E0, refcount IKE peer 1 for crypto_isakmp_process_block

  21 Dec 16:32:16.089 AEDT: ISAKMP: 500 local port, remote port 500

  21 Dec 16:32:16.089 AEDT: insert his with his 67B0AB34 = success

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): treatment ITS payload. Message ID = 0

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): payload ID for treatment. Message ID = 0

  21 Dec 16:32:16.089 AEDT: ISAKMP (0:0): payload ID

  next payload: 13

  type: 11

  ID of the Group: eggs

  Protocol: 17

  Port: 500

  Length: 12

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): peer games * no * profiles

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 215

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is XAUTH

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is DPD

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 194

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 123

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is NAT - T v2

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is the unit

  21 Dec 16:32:16.089 AEDT: ISAKMP: analysis of the profiles for xauth...

  .....

  21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): atts are not acceptable. Next payload is 3

  21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): audit ISAKMP transform 12 against the policy of priority 3

  21 Dec 16:32:16.093 AEDT: ISAKMP: 3DES-CBC encryption

  21 Dec 16:32:16.093 AEDT: ISAKMP: MD5 hash

  21 Dec 16:32:16.093 AEDT: ISAKMP: group by default 2

  21 Dec 16:32:16.093 AEDT: ISAKMP: pre-shared key auth

  21 Dec 16:32:16.093 AEDT: ISAKMP: type of life in seconds

  21 Dec 16:32:16.093 AEDT: ISAKMP: life (IPV) 0x0 0 x 20 0xC4 0x9B

  21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): pre-shared authentication offered but does not match policy.

  21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): atts are not acceptable. Next payload is 3

  ---------------------------

  You can apply the encryption the WAN interface card and check?

• Satellite L100 does not connect to with WAP encryption

  I just got a new Satellite L100 and I'm trying to connect to my Netgear dg834g router wirelessly. If I disabled security it connects ok, but if I activate WAP message said little or no connectivity. I can connect to the router via a network cable and it's also ok.
  If someone could help?

  Hello

  Where have you enabled WPA encryption?
  On the WLan router or wireless network card?
  If you have enabled encryption on the wireless network card, so you must also configure the WLan router with this encryption.
  But if encryption has been configured on the router, so I guess that the wifi card does not support this encryption and you will need to choose another type of encryption as WEP WiFi.

  Encryption depends on the specification of the equipment and not over WLan driver.
  So if the card doesn t supports WPA is so not much to do.

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• Photosmart 6510 does not communicate wirelessly with Mac 10.8

  I have a photosmart 6510 and an imac on 10.8

  Both worked very well together, with all functions wireless works very well, until two days ago.  Two days ago, I changed my ISP and I have a new router. My mac and printer are connected properly to the new router, but they don't communicate wireless now.

  I am able to print the wireless network test results and everything seems fine.

  But when I send anything to print I get a message saying that the printer does not communicate or can't find the printer.

  So I uninstalled and reinstalled the printer drivers and all of the HP software. Everything was fine - the installer sees the device when the usb cable is connected, it indicates that the device is connected to the correct network and upon request I have unplug the usb cable.  But then I get an error warning:

  Device not found on the network:

  Wireless network settings were downloaded successfully on your device. However, your Mac could not locate the device on the network.

  Please make sure that:

  • Your Mac is connected to a wired or wireless network that has access to your device.

  • Your device is connected to the network wireless "TALKTALK".

  Click on "Start over" to try to connect using the current settings. Click 'Go Back' to enter different settings.

  And at this time, I'm stuck.

  Can someone advise please how do I get the printer to work again wireless?

  Thank you

  I think I've solved. restore the factory settings and then reconnected and the corrected IP itself.