Roxio Easy Media Creator 7 compatibility with Vista

Similar Questions

• Trying to install Roxio Easy Media Creator 7 on Windows Vista

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Cannot install because Windows Media Technologies is incompatible with my Windows Vista SP2
  * original title - trying to install Roxio Easy Media Creator 7. Download the message that the Windows Media Technologies has blocked installation because my version is not compatible with this version of Windows. I have Vista SP2.*

  As the software: the site says it's only compatible with "Windows 2000 and XP" I'd take the Windows for her - word software is too old to install under Vista. Download an updated version instead.

  "GrahamParry" wrote in the new message: * e-mail address is removed from the privacy... *

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  * You have problems with programs
  * Error messages
  * These recent changes made to your computer
  * What have you tried to solve the problem
  Cannot install because Windows Media Technologies is incompatible with my Windows Vista SP2

• Roxio Easy Media Creator 7: How can I get this program in Windows Vista?

  I recently got a new computer, how can I get this program in Windows Vista.

  Since you are not the original poster - and this thread is since September 2009, almost a year ago - I don't know anything about your computer or its issues. If you do not have the same problem as the OP and try to install an older version of Roxio Easy Media Creator in Vista, then the answer is the same for you: buy a current version program that will do what you want. Scanning is managed by your printer/scanner software. How manipulate recorded images is then up to you to do some image editing programs. MS - MVP - Elephant Boy computers - don't panic!

• Why I can't get Roxio Easy Media Creator 7 to install under Windows 7?

  I was wondering if someone could tell me why I can't get Roxio Easy Media Creator 7 to install in Windows 7? It worked fine under XP. I even installed on Vista, despite the warnings, it worked fine. Help, please.

  I'm sorry, but Easy Media Creator 7 is not compatible with Windows 7 - it does not appear on the page of Windows 7 Support and compatibility with Roxio products Roxio.  From this page:

  "Some products may not install correctly and limited functionality - even if the product looks installs successfully." Note that Roxio won't provide any support for the installed products on Windows 7 that are not Compatible Windows 7. »
  Boulder computer Maven
  Most Microsoft Valuable Professional

• Roxio Easy Media Creator 9 XE on Windows 7 installation problem

  I have Windows 7 and my software Roxio Easy Media Creator 9 XE do not load. Because Roxio does not more of this software support, can someone tell me how to run.  Or do I now have to buy the latest version of Roxio?

  Many new computers might have some CD burning software packaged with it, you maybe other installed software that you can use?

  You could watch using WMP too.

  How to burn CDs and DVDs in Windows Media Player 12
  http://www.7tutorials.com/how-burn-CDs-and-DVDs-Windows-Media-Player-12

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Make older programs in this version of Windows (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Help with Windows 7 compatibility issues
  http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  An option of the Virtual Machine can be a solution.

  Windows Virtual PC
  Download Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."    If you have an old XP CD (or other older Windows CD) available you can simply download the Virtual Machine and spend the XP Mode download.

  This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look.  Of course you will need a licensed copy of XP to install and run in any of them (except XP Mode).

  VirtualBox is an impressive VM competitor
  http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15

• Need to download Roxio Easy Media Creator LJ

  Original title: Roxio Easy Media Creator LJ

  NEED TO REDOWNLOAD ROXIO EASY MEDIA CREATOR 10 FOR SONY VAIO VPCEB11FX LJ.

  Hello

  
  What operating system is installed on your computer?
  You can see the following link for download Roxio Easy Media Creator LJ on your computer.
  http://Roxio-Creator-LJ.fyxm.NET/
  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  If you encounter installation problems, you can ask your questions on the forums of Roxio. Check out the following link.
  http://forums.support.Roxio.com/
   

• iMic compatibility with Vista?

  IMic compatibility with Vista is?

  If this isn't it:

  http://www.griffintechnology.com/products/iMic/

  to learn more.  If it is, the site says no.

  "kittylizmom" wrote in the new message: * e-mail address is removed from the privacy... *

  IMic compatibility with Vista is?

• Windows Media Player series compatibility with Easy CD Creator 4

  I need to get the series of Windows player on my desktop that is Compatible with the Easy Cd Creator 4 ME. I think that's probably the WMP 7 for Windows (ME) series. Can someone please provide the procedure to achieve the above objective. For now I have WMP 9 Series on my desk ME and I can't burn CDs of using Easy CD Creator 4.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx

  Above is a list of Discussion groups, many of which have been abandoned.

  You will need to seek advice where Google for your information.

  That's all the advice I can give you.

  See you soon.

  Mick Murphy - Microsoft partner

• SUDDEN STRIKE ANTHOLOGY COMPATIBILITY WITH VISTA

  SUDDEN STRIKE ANTHOLOGY IS COMPATIBLE WITH WINDOWS 98, 2000 AND XP... BUT I BELIEVE THAT IT IS POSSIBLE TO USE WITH VISTA IF YOU CHANGE THE SETTINGS ON THE COMPUTER... ANYONE KNOW HOW THIS IS FACT... THANKING YOU.

  Hello.

  The only setting I can think of that might help you right now is to run the game in compatibility mode of Windows XP.
  This is done by clicking on the game launcher icon and choosing Properties.

  Then go to the Compatibility tab and make sure that the "run this program in compatibility mode for:" is checked and that Windows XP (Service Pack 2) is the option chosen in the list of modes.

  Hobby technician Robin Tuomi-Persson -.

• Compatibility with Vista and XP

  I have Vista Home Basic loaded on my laptop, but I would like to find a CD Rom that uses other software Windows, it's the compatibility program I can down load?

  And I'm not a mind reader, that's all.

  I posted a response to your new thread that should help you: http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/d09a447c-327a-47c1-944c-733aa75e6bd7/ ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Microsoft Intellipoint 4.1 compatibility with Vista

  I've had this mouse works with help from someone on this forum last year, but due to a storm or something that I had to have a system restore and in this restoration, I can't get the mouse working. I really need this mouse to work because of a physical proplem with my hands. Please, help me make it work again.

  Hi kstater,

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  Step 1: Search for any displayed error message

  1 key on the keypad (start) to hit windows > type devmgmt.msc and press ENTER to open the Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, locate mice and other pointing devices and her then press enter on the device name.

  3. If an error code has been generated, the code appears in the status box of the device under the general tab.

  Please provide the error message that appears

  Step 2: Download and install the latest software for the mouse

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  For more information, see the link below

  Install IntelliPoint software and the mouse

  http://support.Microsoft.com/kb/258785

  You might want to know

  Keyboard shortcuts

  http://Windows.Microsoft.com/en-us/Windows-Vista/keyboard-shortcuts

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Xp Media Edition (and compatibility with Camtasia Studio)

  Hi - I am looking to buy VM Fusion and could not find a simple

  place to ask a very simple question: I currently have a laptop running

  Windows XP (Media Edition). If I can clone this system and it will work on

  my iMac as a virtual machine? I know that XP is supported, but whatever

  This edition of Media Center problems would be useful to know.

  Secondly, can I load Windows applications after installing virtual machine

  Fusion (e.g. Camtasia Studio) or I need to install them before I

  clone of the machine?

  Finally, had anyone actually run Camtasia Studio in a virtual machine

  environment and if if - they had problems of desktop capture

  activity between open mac and windows programs?

  Know the answers to these questions would really help me make up my mind on how to move forward with the merger of the VM.

  Thanks in advance.

  First of all, you can download a fully functional version of Fusion and get a free 30-day trial serial number in order to test if the merger is good for you.

  Second, you can use VMware vCenter Converter to create a virtual machine from a physical computer, however if the Windows operating system came pre-installed OEM or is an OEM version, so he is not legally transferable to another computer by the EULA and may also verify that it is running on a hardware OEM and wouldn't work anyway. If you have a legally transferable copy of Windows and intend to remove it from the physical hardware after the conversion, then this is an option however with Windows Media Center not all features will work when virtualized and the features of Media Center with General questions.

  As far as Camtasia Studio, I installed this in a Windows XP Pro VM and played with it a little but not enough to say that it is 100% usable in all its features.

  The best thing I can suggest is take advantaged of the free 30 days trial serial number and see if the Fusion is a viable option for your needs and also there is Boot Camp where you would be under Windows natively on Apple hardware and would not have any different problem then other support material physical.

• Airport Extreme compatibility with Vista

  I have a laptop HP Vista Home Premium 32-bit running, and it will not connect to my Airport Extreme router.  I have a XP computer that connects very well.  When I disable WPA security on my network, the Vista computer connects and when I activate WPA it will not identify the network.

  The XP system uses WPA?  Does Airport Extreme support WPA?  (I imagine for this).  Have you tried to use WEP, despite what is less secure than WPA?  Have you tried to enter the WPA authentication information in the network connection on the Vista system? Brian Tillman [MVP-Outlook]

• Sdatellite L300 - lost Easy Media after Windows 7 upgrade

  Hello

  I recently upgraded my L300 vista to windows 7 (32 bit).

  My problem is that now I can not find or download the easy media.

  How can I find this software drivers which link to resolve this problem?

  Hello

  What Easy Media software do you mean exactly?
  Do you mean the Roxio easy Media that allows you to burn data on the disk?

  This software is part of the image that only it can not be downloaded.
  If you want to use with Win 7 you have to buy a full version

  Welcome them

• Re: Toshiba Recovery Media Creator - no HDD Recovery area

  Hi friends, I bought a new Toshiba Kirabook PSU8SA-00V00U, a few months ago. I wanted to create emergency recovery disks, but whenever I start Toshiba Recovery Media Creator, it comes with a message that HARD drive recovery area undetected.

  Then I tried running the recovery environment by pressing 0 at the beginning upward.
  It comes with a blue screen saying that can not load from the recovery partition.

  I checked with Paragon Hard Disk Partition Manager software that the recovery drive is available.

  How do I make a recovery media or connect this HDD in system recovery so that Toshiba Recovery Media Creator detects the recovery disk and made recovery media. If in the future, if I want to reset the PC to factory settings, it will be even coming up with a blue screen saying that it can not load the recovery environment.

  Any help will be appreciated!

  Hello

  Fact is that the installation of image recovery or recovery media creation works if the machine has only factory settings. In other words, everything must be in original condition without any changes. With the changes I mean, original OS must be installed and the structure of the partitions of HARD drive should not be changed.

  If you try to change HARD drive partitions original structure the system in general, or Toshiba recovery media creator, will be confused and will not be able to find what we call markers which provide information on the exact location on the HARD disk where the recovery image is placed or registered.

  Did you do something that might be responsible for this situation?