Airport Extreme compatibility with Vista

Similar Questions

• Can I extend my Airport Extreme 6 with an Airport Express A1264?

  Can I extend my Airport Extreme 6 with an Airport Express A1264?

  I've just set up my new Airport Extreme 6.

  I used to have an Airport Extreme 1 (persist, but currently unused).

  • with an Airport Express base station 1 (A1264), which is connected to
    • My usb printer
    • a gadget of cisco to help my ATT cell service

  I can't understand how to add the Express on the network.

  Any suggestion would be appreciated.

  Thank you

  Brad

  The Airport express does not appear as a device listed to select.

• iMic compatibility with Vista?

  IMic compatibility with Vista is?

  If this isn't it:

  http://www.griffintechnology.com/products/iMic/

  to learn more.  If it is, the site says no.

  "kittylizmom" wrote in the new message: * e-mail address is removed from the privacy... *

  IMic compatibility with Vista is?

• AirPort Extreme works with only a few devices

  I have an AirPort Extreme 802.11 model ac.

  It worked perfectly for about a month, but now, only a few devices are connected with it. These devices will be connected only after the opening of the AirPort Utility. My AppleTV will not indicate the network, but the message "no network connection. Your Wi - Fi network is not connected to the internet. Change your settings or select a different network. »

  I tried restarting the AirPort Extreme and my router by unplugging and plugging back. I also rebooted AirPort Extreme internally by restarting in AirPort Utility. From now on, only my iPhone and MacBook Pro will connect.

  Even with those who sometimes it will connect and the other will not.

  

  Any ideas on how to solve this problem?

  I would say that your extreme is autonomous from router mode in Bridge mode... He can do. A power failure caused to ruin the current configuration and replaced another... you must remedy by a complete factory reset and reconfigure correctly.

  Before to do it tell us what model is your modem?

  And you have the configuration of the airport in bridge or router at this time?

• SUDDEN STRIKE ANTHOLOGY COMPATIBILITY WITH VISTA

  SUDDEN STRIKE ANTHOLOGY IS COMPATIBLE WITH WINDOWS 98, 2000 AND XP... BUT I BELIEVE THAT IT IS POSSIBLE TO USE WITH VISTA IF YOU CHANGE THE SETTINGS ON THE COMPUTER... ANYONE KNOW HOW THIS IS FACT... THANKING YOU.

  Hello.

  The only setting I can think of that might help you right now is to run the game in compatibility mode of Windows XP.
  This is done by clicking on the game launcher icon and choosing Properties.

  Then go to the Compatibility tab and make sure that the "run this program in compatibility mode for:" is checked and that Windows XP (Service Pack 2) is the option chosen in the list of modes.

  Hobby technician Robin Tuomi-Persson -.

• Roxio Easy Media Creator 7 compatibility with Vista

  How can I install Roxio Media Creator 7 on HP?

  following message appears on the dialog box. Does anyone know the solution for this?

  Program: Windows Media Technologies

  Publisher: Microsoft

  Location:C:\Temp\setup_wm.exe

  This version of Windows Media Technologies is incompatible with or has been replaced by this version of Windows.

  Hi Uptown_nyc,
  
  As the message says, Roxio Media Creator 7 basic is not compatible with Windows Vista. Click here to check. However, there are other versions that are comapatible with Windows Vista. See: http://www.microsoft.com/windows/compatibility/windows-vista/Search.aspx?type=Software&s=Roxio%20Easy%20Media%20Creator
  
  While you can try to install Roxio Media Creator 7 in Windows XP compatibility mode.
   
  Use this link to make older programs to run:
   
  Follow the steps in the link to run older programs in compatibility mode.
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
  Before you install in Windows XP compatibility mode, disable all security software temporarily and try to install Roxio Media Creator 7.

   

  Note: Allow all security software once you have installed.
   
  If this does not work, you may need to contact the manufacturer for a better support.
  http://www.Roxio.com/enu/products/Creator/Deluxe/overview.html
   
   
  Aziz Nadeem - Microsoft Support

• Compatibility with Vista and XP

  I have Vista Home Basic loaded on my laptop, but I would like to find a CD Rom that uses other software Windows, it's the compatibility program I can down load?

  And I'm not a mind reader, that's all.

  I posted a response to your new thread that should help you: http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/d09a447c-327a-47c1-944c-733aa75e6bd7/ ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Microsoft Intellipoint 4.1 compatibility with Vista

  I've had this mouse works with help from someone on this forum last year, but due to a storm or something that I had to have a system restore and in this restoration, I can't get the mouse working. I really need this mouse to work because of a physical proplem with my hands. Please, help me make it work again.

  Hi kstater,

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  Step 1: Search for any displayed error message

  1 key on the keypad (start) to hit windows > type devmgmt.msc and press ENTER to open the Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, locate mice and other pointing devices and her then press enter on the device name.

  3. If an error code has been generated, the code appears in the status box of the device under the general tab.

  Please provide the error message that appears

  Step 2: Download and install the latest software for the mouse

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  For more information, see the link below

  Install IntelliPoint software and the mouse

  http://support.Microsoft.com/kb/258785

  You might want to know

  Keyboard shortcuts

  http://Windows.Microsoft.com/en-us/Windows-Vista/keyboard-shortcuts

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Replace 2004 Airport Extreme with more later?

  WE have an iMac 2009 running Snow Leopard and a MacBook Pro in late 2011, with the help of an old 2004 Airport Extreme Base Station. The second works very well, but I just discovered it's crimping our internet speeds considerably from that proposed Comcast (tested with ethernet this morning). I know that the new Airport Extreme WORK with our computers, but it will increase our speed, even though computers support not the fastest new PHY mode? I would not upgrade the router only to learn that we do not earn a lot (we can't get much more with the current router 17mbps, but by ethernet, we got 57mbps this morning).

  Thank you

  Owen

  So, if you have connected an Ethernet cable from your Mac to the port on the AirPort Extreme Ethernet older you 57 Mbps... or did you connect your Mac directly to your modem using Ethernet and pick up the 57 Mbit/s in this way?

  When you have measured 17 Mbps on the wireless connection... it was with the computer about 6-7 feet (or about 2 meters) from the airport with direct line of sight between the computer and the router AirPort?

  How many other wireless devices are also involved at the time?  To get a decent wireless speed reading, you want to try to restrict things to a single computer and the router from the airport when you run the speed control.

  Then add more wireless devices and run the speed check again to see how the "charge" on the wireless network speed is affected.

• Question about the replacement of the dilapidated old Airport Extreme

  I have an old Airport Extreme, probably about 8 years old.   There seem to be wonky on me.  I tried everything, including resetting to the factory settings.  In any case, the point is that I have to replace the unit.  However, it is mounted in a box electric wall unit, which is not deep enough to contain the new style 'vertical' Airport Extreme which is meant to sit on a desk. It is about an inch too wide.  This new design really * for my situation.

  So, I'm stuck with a choice to replace it with another employee (or I think that some are still box on Amazon) old Airport Extreme, or with another unit of the brand that does the same thing.  Of course, I prefer to stay with Apple, like all my Airport Express, my Time Capsule airport and all our devices are Apple.

  What is the best choice?

  There is a third choice: install the new unit somewhere else than in an electric box armoured, metal. This is not a good location for any wireless device.

• Airport Extreme loses the connection to the home network

  I have an Airport Extreme (AE) with Cox Internet in my house. Version AE 7.6.7 since the end of may 2016, I lost WiFi connection radomly. I had a Cox technician out who finished just change a 'filter' in our neighborhood who feed on other Cox at the reception. He said this analog filter had to be upgraded to a digital filter.  Despite this, my WiFi kept down again. According to other Threads of the community, this problem was solved by putting the IPV6 in AE parameter for "link-local only.  I did this and still it is falling.

  According to a recent post in support of Cox:

  Most of the routers to retail, especially those produced in recent years, are completely compatible with IPv6. Cox has determined that the Apple AirPort Extreme routers, including Time Capsule models, may know Internet connectivity issues when running the firmware released before May 25, 2016. For more information, contact Apple Support.

  To a Moderator: Apple will have an AE update for this problem?

  The moderators of the forum are not questions on a user to user support forum, so don't expect a response from an Apple employee.  Please contact Apple Support directly if you wish to speak directly with Apple.

  Then, Apple has already released the new firmware... 7.6.7 May 25... so it's not the question that you reference in the statement on the website of Cox. Cox was referring to a firmware sooner, like 7.6.4, for example in their declaration.

  We have seen a number of messages from other users of Cox, who reported that the new firmware has resolved connection issues that existed before.

  To find out where the real problem may lie, I suggest that you connect a computer (with the wireless turned off) directly to one of the LAN ports <>- on AirPort Extreme for a few days and keep an eye on the connection.

  Post back your results. Then, we'll know if you have a general Internet... connection problem that could be a problem of modem... or a single wireless issue.  In all cases, it will help if you provide the model number of the AirPort Extreme you have... and... he make and model number of the modem you are using at the moment.

• Windows 7 computer to connect to Airport Extreme with an external USB drive attached. Flash drive appears for the network map but not the hard drive.

  original title: drive hard extreme airport

  Using Windows 7 and the Airport Extreme.  The Airport Extreme has a USB port that can be used to mount an external hard drive which is accessible via the wireless connection.  Only thing is, I can't get a 2 GB flash drive will appear for mapping.  When I use the other hard drives, they never show upward for mapping.  They show that it is connected to the Airport Extreme, but are not seen by my PC.   The internet has a rumor according to which hard drives will show up only on a PC if they are to FAT32... which would work without another formatted hard drive.  What do you know about my problems of compatibility with hard drives?

  Hello

  Check updates firmware for the Airport Extreme.

  Airport Extreme
  http://www.Apple.com/WiFi/

  Airport - Support
  http://www.Apple.com/support/airport/

  ---------------------

  Although I think that the question is really the Airport Extreme also updates Windows 7 WiFi.
  Check with the system manufacturer and the real device manufacturer updates the driver.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• My ipad 3 has stopped communicating with my airport extreme.

  My ipad 3 has stopped communicating with my airport extreme.  I rebooted, both so that made a network reset on the ipad.  He sees the airport but does not connect.  It will work on the personal hotspot on my phone.

  Hello

  If your ipad works with a hot spot that's the Aiirport is the problem

  Go to the Apple Web site

  support. Apple.com

  You may need a software update for airport how old is this do you have another

  Router, you can try?

  See you soon

  Brian

• How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to work with this pinhole?

  Usually a paperclip or toothpick or ball pen.

  Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.

  How to reset AirPort Extreme 10.11.6 OS?

  The software method... Unlike the above material method... is to open airport utility and select restore default settings.

  

  Both methods take you to the same place.

  You can also read the manual...

  Reset to a base station AirPort FAQ - Apple Support