RROD

Similar Questions

• USB device not recognized... Unplug the thing does NOT work

  It baffles me that THOUSANDS of people have this problem, or a variant of it, and no ONE at Microsoft or elsewhere also offers a real solution. Unless of course you want to count the method "unplug your computer", which is the most foolish band-aid for a problem I never heard, even if it works for a lot of people (most). I, unfortunately, am one of those for which the "disconnect" method magic does NOT work. I tried everything what all other posters and responder suggested (BIOS upgrade, change Legacy BIOS definition Enable to disable to activate again, driver updates, uninstall all USB, full power down and restart hours later, use CMD prompt to show only devices, etc.) and do not know what else to try. I would really like to see a REAL answer as to the cause of the majority of the questions posted about the USB error outside the usual "restore your settings, use your restore disk, unplug it, replace your USB key, etc etc etc. HEY! MICROSOFT! SOLVE THE PROBLEM! OR, Hey, here's an idea, a news for you, I'm sure that... don't they exude products until they have been tested (NO! I mean really, fully tested [see XBox 360 RROD])

  In case anyone reading this is a real working solution, I'm on a Toshiba A135-S2386, Vista Home, and each USB port is unusable on any device. All ports feeds the device and noise sounds to indicate that a USB device was attached and then proceeds to the display of the error "USB device not recognized" and shows and shows an unknown device connected. It does this for any USB device.

  FINALLY: PLEASE PLEASE PLEASE DO NOT POST A REPLY IF YOU USED THE METHOD OF "DISCONNECT", AND IT WORKED. Grats to you for fixing your computer, but I can just not read another 400 posts of "wow it worked for me great fantastic" when it does NOT work for everyone. I need something new and real. (Sorry to be all grumpy, but I'm tired of these kinds of problems from companies making billions off the coast of junk, defective, half finished, produced a car!) "You listen to Bill?)

  UPDATE: just ran a scan of the system file Confirmation via an administrator command prompt and it's clean...
  ALSO - was not that before, but now whenever I do a complete power down / reboot thing that it gives me a "Bad Checksum" error and I have to reset the date and time in the BIOS. I need to change the battery in MB? As I said it did not have this before and the USB error was produced, but could this be the problem? Bad battery MB CMOS?

  The bios of your motherboard is probably damaged.

  step 1. See if you can find a previous version of the bios of your motherboard and return date of the bios.

  step 2. Find the latest version of the bios of your motherboard and update your bios.

  Do not use a registered version of your current version.

  To check the problem is the motherboard or operating system. find something like a live Ubuntu CD

  http://www.Ubuntu.com/desktop/get-Ubuntu/download.

  or

  Make a Ultimate Boot CD for Windows

  http://www.UBCD4Win.com/index.htm you are using windows xp or borrow a copy to UBD4WIN.

  Both of the above run in memory (does not load on hard drive.

  Both a bit slow, but are excellent tools.

  Works like a normal computer.

  If you can see you USB devices, magicjack, ETC. your BIOS is not corrupt or motherboard problem.

  In normal windows if you see not the USB devices, magicjack, etc your windows install is corrupt.

  Reload Windows of difficulty.

  If you you do not see the magicjack, USB devices, ETC., your BIOS is corrupt motherboard or other problem.

  Redo your BIOS as described above.

  All other unwanted do not work , he was done !

• Where to find the replacement physical disk system restore?

  Good so I had an old model Notebook/Tablet PC and tried Windows 8 on it, since Win8 is really Intense App and defined for the type touch screen interface and all that.

  Well well... fingerprint reader and many other things simply does not work. Tried all workarounds that I could as well and it is just a no-go.  So I thought "hey Let's use this fancy restore disc".

  Well... to restart the PC, press F11 and... nothing happens. It starts normally just.

  So I'm in the bios and extend the deadline, thinking it didn't catch and then try again... and again... and again...

  No luck... Curious, I opened the D: / and there is only 1 file seen...

  & drvmig & 1 KB of size...

  But the D: / said he consumes more than 40 MB... as well as of... very unusual.

  Since I have not implemented a Dual Boot of Windows Vista/Windows 8...   I'm stuck on 8, with a system non-working for the most part.  Even the wifi has problems. (Had to wait and go home on the desk to write this)

  In any case... to sum up the story... I tried to find the disc "restore your system" paper with what he was referring to-because the Discless option apparently is a No Go (unless maybe someone else has something to try?)

  The book says that I can order a replacement disc blah blah.  I know it's a few years old and everything - but the discs have got to be always around.  I must have my fully functional Wacom drivers - as well as the fingerprint reader (which seems to want to not install at all - even after several tries).

  EDIT:.

  Tried anyway - it did nothing. It starts as if I had not changed a thing.

  It does not appear that there is a command option or HP support is terrible, worse then I had ever imagined.  They should be ashamed of themselves for cutting so many corners.

  The Tablet I bought is a known defective system.  Its design has many flaws that cause its failure usually in 1 year and 2 months of use.  Sometimes sooner, given the climates.

  HP has refused to make public something known and refused to give him a recall notice - instead they keep blaming it on other things and never get the problem resolved.

  I've been waiting 4 years after the last models were made - they would at least recognize this problem - at least a cup up to her.   This is not the case.

  I fell on the Support forums to see if my problem can be corrected.  HP apparently cares not at all.

  I will turn to illegal means to fix my problem - because HP don't care my system in any way, as well as take the chance - every chance I get - to warn everyone interested in a HP buy simply do not place.     We will go to Dell or Toshiba according to our needs.

  HP should certainly be stopped.   Bad, bad product support and skirting around the fingers solutions then don't be directed to them for making a mistake.

  Mistakes happen, HP.    What makes other companies so good compared to you - is that they cut up to the mistakes and try to do better for those made by them.  This does not mean giving millions of dollars - away simply stating "we messed up, but here is how you can solve the problem once and for all"-are all that is needed.

  In my Tablet model, there is a kind of "carpet" fuzzy on one of the chain and the GPU has a thick heat cushion plugging on the radiator.  Here's the first problems.     Replace the thermal pad with a pure thickness 1.2 mm or 1 mm copper plate and use a few good thermal grease such as arctic silver 5 on both of its sides.  If you really want to guarantee employment some silicone high temperature apply sealant on the edges is like a framework so it it adheres in place and won't slip.  Replace the carpet with new grease as well, and your connections on the radiator must be perfect.

  Lower temperatures up to 30 ° C.   Given that the system has been called to hit more frequently - 100 c and damage irreverseable - drop 30 c is a great victory.

  I want you to keep in mind this "difficulty" requires almost no computer knowledge, around $8 in supplies to buy everything that (with shipping and handling and inflated ebay prices) and less than an hour of work to do.

  So why, exactly, could not HP fix their own models of 4 years ago?  It was just the thermal pads, they used! They remove not enough heat, and indeed cuased heat build up on top of the CPU and GPU!  Copper to copper authorized connection heat flow upward and out of the system as it was proposed and solved overheating once and for all!

  Microsoft has had a similar problem with their origins Xbox360, the RROD.  The problem of heating has been fixed by - you guessed it - fix the spacing between the GPU and the CPU contact for heat sinks.  It's another fix ' 1 mm '.

  Of course, quality control slipped in both cases - but Microsoft rumbles again because they have replaced hard defective systems (sometimes with new systems depending on where you did) and said: "we are sorry".

  However, HP has no.  This is why you are unable to HP. This is why people are upset.  If it was not a problem - we wouldn't be find ways to modify systems to correct.  But when even... you won't admit there are problems you too looked in the manufacturing industry.

  Admit that you made a mistake.   At this time (4 years after the model has been released) nobody is going to care much if they can't get replacements.  That is what Ebay is for.  You won't have the money. You just do what you have had to do the whole time - that will HELP your customers stay loyal.

  HPs new motto should be ' go cheap and don't care, we do it. "

• VPN tunnel via Cisco to SBS 2008 RRAS router

  I need to provide access to remote users outside of ro on the VPN connection. I have a SBS 2008 Server with 1 NIC (10.1.1.1) and active VPN via the option "set up Virtual Private Network" on the SBS console, I enabled the GRE and port 1723 on my Cisco firewall so (10.1.1.254).

  I can VPN to SBS internally very well and can telnet to port 1723, but cannot spend outdoors.
  I get error 800 how connection on windown 7 PC.

  I can't telnet to port 1723 on the outside (on the internet), please see my Cisco confug and advice if I missed anythings:

  wrsydgw #sh run
  Building configuration...

  Current configuration: 8337 bytes
  !
  version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  encryption password service
  !
  hostname wrsydgw
  !
  boot-start-marker
  start the flash c870-advsecurityk9 - mz.124 - 15.T4.bin system
  boot-end-marker
  !
  forest-meter operation of syslog messages
  enable secret 5 $1$ rroD$ / R.6Ce8EdSw7S7B3AJjX81
  !
  AAA new-model
  !
  !
  !
  !
  AAA - the id of the joint session
  clock timezone 10 30 sydney
  !
  Crypto pki trustpoint TP-self-signed-432125903
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 432125903
  revocation checking no
  rsakeypair TP-self-signed-432125903
  !
  !
  TP-self-signed-432125903 crypto pki certificate chain
  certificate self-signed 01
  30820255 308201BE A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
  2 060355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
  69666963 34333231 32353930 33301E17 303230 33303130 30313331 0D 6174652D
  315A170D 2E302C06 1325494F 03550403 32303031 30313030 30303030 5A 303031
  532D 5365 6C662D53 69676E65 4365 72746966 69636174 652 3433 32313235 642D
  06092A 86 4886F70D 01010105 39303330 819F300D 00308189 02818100 0003818D
  D54A7EE8 D5B13EED 87D8B177 BC34EDD3 3F2BE37D CEF6E57A 1EDBCF29 344B54C4
  EC4DDA6C 8CD07E5C C7E1E6AF 667A5A14 1 HAS 390265 634152D 344D430F 0 ACB0A9F0
  A78CA88C C14B4839 6B367DD1 8D8D726A 36624CC2 3CEC616D D72EC30E D27DE845
  6F443BE2 51EB9660 981EF07B 097C335D 12D06DD3 2FA8EB3C C20F148B EF367A1F
  02030100 01A37F30 7D300F06 03551 D 13 0101FF04 05300301 01FF302A 0603551D
  21821F77 11042330 7274732E 726F6265 6D2E696E 63383737 7465726E 6F64652E
  6F6E2E6E 6574301F 0603551D 23041830 16801450 41DDCEFD CF041B7B B 48371, 91
  5E7EC2D5 D7F6C330 1 D 060355 1D0E0416 DDCEFDCF 04145041 041B7B48 371B915E
  7EC2D5D7 F6C3300D 06092 HAS 86 01010405 00038181 004B1DB1 6EA45622 4886F70D
  2697E497 BE5D2F71 C15F70B5 9DE07318 A1AD6451 E2502A89 22EC2B7D 26D1C4B7
  BC7D09EA F376A2E1 0DF851F2 52C5CFE2 3660BF22 D58E2B15 8A3610BF EDA2FCDC
  B5F7429B A89D84D2 EC126229 489CA0D4 E178FC1E E1FBA853 C78AD740 C5A98B4D
  4CB58F93 1019D06B 78 C 45799 A5BB1A6F 17FE4C6D 7CE5135B DF
  quit smoking
  dot11 syslog
  no ip source route
  !
  !
  !
  !
  IP cef
  no ip domain search
  IP domain name internode.on.net
  name of the IP-server 192.231.203.132
  name of the IP-server 192.231.203.3
  No ipv6 cef
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  No vlan spanning tree 1
  No vlan spanning tree 100
  username xxxprivilege 15 password 7 xxxxxx
  username privilege 15 secret 5 xxxx xxxxxx.
  username, password 7 xxxxprivilege 15 xxxxxx!
  !
  crypto ISAKMP policy 1
  BA 3des
  md5 hash
  preshared authentication
  ISAKMP crypto key QnrpzdFI address 139.130.36.42
  ISAKMP crypto 5 30 keepalive
  !
  !
  Crypto ipsec transform-set esp-3des esp-md5-hmac vpn - ts
  !
  RTP 1 ipsec-isakmp crypto map
  defined by peer 139.130.36.42
  the value of the transform-set vpn - ts
  match address Maria
  !
  Archives
  The config log
  hidekeys
  !
  !
  property intellectual ssh version 2
  !
  !
  !
  ATM0 interface
  Description - The internode ADSL-
  no ip address
  no ip-cache cef route
  no ip route cache
  no ip mroute-cache
  No atm ilmi-keepalive
  !
  point-to-point interface ATM0.1
  no ip route cache
  PVC 8/35
  PPPoE-client dial-pool-number 1
  !
  !
  interface FastEthernet0
  spanning tree portfast
  !
  interface FastEthernet1
  switchport access vlan 100
  !
  interface FastEthernet2
  spanning tree portfast
  !
  interface FastEthernet3
  spanning tree portfast
  !
  interface Vlan1
  10.1.1.254 IP address 255.255.255.0
  IP access-group INOUT in
  penetration of the IP stream
  stream IP output
  IP nat inside
  IP virtual-reassembly
  IP tcp adjust-mss 1450
  !
  interface Vlan100
  IP 10.1.2.254 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  IP tcp adjust-mss 1450
  !
  interface Dialer0
  Description OF the internode
  the negotiated IP address
  IP access-group DRY in
  IP mtu 1452
  NAT outside IP
  IP virtual-reassembly
  encapsulation ppp
  Dialer pool 1
  Dialer-Group 1
  Authentication callin PPP chap Protocol
  PPP chap hostname [email protected] / * /

  PPP chap password 7 xxxxxxx

  crypto rtp map
  !
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 Dialer0
  IP route 10.2.0.0 255.255.0.0 10.1.1.247
  no ip address of the http server
  no ip http secure server
  !
  IP high speed-flyers
  Top 50
  Sorting bytes
  cache-timeout 5000
  !
  IP nat inside source map route VPN-sheep interface Dialer0 overload
  IP nat inside source static tcp 10.1.1.1 25 59.167.239.185 25-card route-bypass extensible portfwd
  IP nat inside source static tcp 10.1.1.1 443 59.167.239.185 443-route-bypass portfwd expandable card
  IP nat inside source static tcp 10.1.1.1 1723 59.167.239.185 1723-route bypass-portfwd expandable map
  IP nat inside source static tcp 10.1.1.1 3389 59.167.239.185 route-bypass extensible portfwd 3390-card
  IP nat inside source static tcp 10.1.1.7 3389 59.167.239.185 3391-route-bypass portfwd expandable card
  IP nat inside source static tcp 10.1.1.125 4333 59.167.239.185 route-bypass extensible portfwd 4333-card
  IP nat inside source static tcp 10.1.1.133 4334 59.167.239.185 route-bypass extensible portfwd 4334-card
  IP nat inside source static tcp 10.1.1.112 59.167.239.185 4335 4335-route-bypass portfwd expandable card
  IP nat inside source static tcp 10.1.2.200 8000 59.167.239.185 8000-route-bypass portfwd expandable card
  IP nat inside source static tcp 10.1.2.201 443 59.167.239.185 8001-route-bypass portfwd expandable card
  IP nat inside source static tcp 10.1.2.10 80 59.167.239.185 8002-route-bypass portfwd expandable card
  IP nat inside source static tcp 10.1.2.11 80 59.167.239.185 8003-route-bypass portfwd expandable card
  IP nat inside source static tcp 10.1.1.10 80 59.167.239.185 route-bypass extensible portfwd 8004-card
  IP nat inside source static tcp 10.1.1.11 80 59.167.239.185 8005-route-bypass portfwd expandable card
  IP nat inside source static tcp 10.1.2.200 80 59.167.239.185 - extensible 8008 portfwd bypass road map
  !
  DRY extended IP access list
  allow tcp any a Workbench
  permit tcp any any eq 22
  allow any host 59.167.239.185 eq tcp smtp
  allow any host 59.167.239.185 eq 443 tcp
  allow any host 59.167.239.185 eq 8000 tcp
  allow any host 59.167.239.185 eq 8008 tcp
  permit tcp any host 59.167.239.185 eq 8001
  permit tcp any host 59.167.239.185 eq 8002
  permit tcp any host 59.167.239.185 eq 8003
  allow any host 59.167.239.185 eq 4333 tcp
  allow any host 59.167.239.185 eq 4334 tcp
  allow any host 59.167.239.185 eq 4335 tcp
  allow any host 59.167.239.185 eq 8004 tcp
  allow any host 59.167.239.185 eq 8005 tcp
  permit any any icmp echo response
  allow an esp
  allow a gre
  allow a whole ahp
  allow icmp all once exceed
  ICMP all all ttl-exceeded allow it
  allow all all unreachable icmp
  permit any any icmp echo
  allowed UDP any eq field all
  permit udp host 192.231.203.132 eq ntp all
  permit any any eq non500-isakmp udp
  allow udp any any eq isakmp
  deny ip 127.0.0.0 0.255.255.255 everything
  refuse the ip 255.255.255.255 host everything
  refuse the host ip 0.0.0.0 everything
  IP 10.2.0.0 allow 0.0.255.255 everything
  allow any host 59.167.239.185 eq 3389 tcp
  permit tcp host 67.15.24.9 host 59.167.239.185 eq smtp
  permit tcp host 67.15.42.51 host 59.167.239.185 eq smtp
  permit tcp host 67.15.52.7 host 59.167.239.185 eq smtp
  permit tcp host 69.16.202.203 host 59.167.239.185 eq smtp
  permit tcp host 69.16.202.216 host 59.167.239.185 eq smtp
  permit tcp host 70.84.109.196 host 59.167.239.185 eq smtp
  permit tcp host 207.44.218.60 host 59.167.239.185 eq smtp
  permit tcp any host 59.167.239.185 eq 3390
  permit tcp any host 59.167.239.185 eq 3391
  deny ip any any newspaper
  permit tcp any any eq 1723
  allow any host 59.167.239.185 eq tcp 1723
  INOUT extended IP access list
  refuse tcp 10.1.1.3 host no matter what newspaper eq 3389
  allow an ip
  SHEEP extended IP access list
  deny ip 10.0.0.0 0.255.255.255 10.0.0.0 0.255.255.255
  ip licensing 10.1.1.0 0.0.0.255 any
  IP 10.1.2.0 allow 0.0.0.255 any
  NOPFW extended IP access list
  deny ip 10.0.0.0 0.255.255.255 10.0.0.0 0.255.255.255
  IP enable any 10.1.1.0 0.0.0.255
  IP enable any 10.1.2.0 0.0.0.255
  Maria extended IP access list
  IP 10.1.0.0 allow 0.0.255.255 10.2.0.0 0.0.255.255
  !
  !
  !
  !
  !
  route map VPN-sheep permit 1
  corresponds to the IP SHEEP
  !
  bypass-portfwd allowed 10 route map
  corresponds to the IP NOPFW
  !
  !
  control plan
  !
  !
  Line con 0
  no activation of the modem
  line to 0
  line vty 0 4
  privilege level 15
  Synchronous recording
  entry ssh transport
  !
  max-task-time 5000 Planner
  NTP 192.231.203.132 Server prefer
  end

  For this line of NAT:

  IP nat inside source static tcp 10.1.1.1 1723 59.167.239.185 1723-route bypass-portfwd expandable map

  Can you please try to remove it and change it to all the following:

  IP nat inside source static tcp 10.1.1.1 1723 59.167.239.185 1723 extensible

• After 30 seconds of playback AVCHD m2ts to xbox 360 extender stutter starts, mfpmp goes to 100% on Windows 7 host computer.

  Hello

  The first 30 seconds, the mfpmp.exe process takes just 10-20% during playback on the Xbox 360 Media Center Extender session. If no film (taken with sony HDR-CX11) more then 30 seconds is a problem, the stuttering start, maybe something with buffering of the mfpmp process. The content isn't DRM as much as I know, I don't need this.

  I have a huge collection of movies to AVCHD and photos, so evertime I start the CCM session on the xbox a wmpnetwk.exe process is started to run multimedia files, + 60,000 images and + 25,000 video hollow. Perhaps he disrupts video playback, I just bought a xbox 360 slim. In 2010, I had a fat xbox version (RROD), he played the AVCHD content with no problems. My Windows 7 was not chaned meanwhile. It has Sp1 service pack and updates between the two, perhaps something has changed with AVCHD playback in a session of Xbox 360 MCE.

  Any ideas why more long AVCHD movies are choppy / stutter during playback?

  What about Tom

  In addition to the reported problem I suddenly could not use mstsc.exe in the same workstation Windows 7 mentioned above. After a few reboots and try and erros, I decided to uninstall the Antivirus software Avira free. This because the antivirus prevented me from using a restore point from the system since last week.

  After uninstallation THAT RDP worked again, I also tried to spread the files m2ts to Xbox, @ first it stuttered again. I checked a few other films, after a few minutes all the movies played without problem.

  I installed the basics of security, no more problems.

  What about Tom