Rule business spawning multiple instances of itself

Similar Questions

• Spawning multiple instances of a sprite (shoot the balls).  Need help.

  Hello.  I am currently doing a game in director 11.5 for a University project.  I decided to make a scrolling space shooter, but I encountered a problem.  A tutorial I found has created a limited 'Bank' of the balls of fire, allowing only a number on the stage at one point.  What I have to do is to let a single sprite ball off the edge of the page and copy essentially he and behaviours lingo to spawn another instance of the ball on the scene when the player fires (using the left button of the mouse in this case).  I also need this copy should be deleted entirely when it collides with an enemy or leaves the boundaries of the stage, otherwise the game will just run more slowly and more slow several shots are taken.

  I heard that it is possible using the puppetSprite() method, but the API is not shine much light on the issue and no a literally hours of searching on google.  If anyone can let me know any method to do so, I would be very grateful.

  On a related, when matter fired the bullet will need to intsect the situation where the mouse cursor was when the bullet was fired and then continue on a linear trajectory.  I worked on a method to do this, but it's not very effective or efficient (the speed of the balls would be determined by the cursor of the mouse is how far from the ship of players and I think that there is probably a less intensive calculation method to achieve) and as I can't spawn bullets from now I really don't know if it will work yet.  If anyone has any advice on how to best implement this mechanic, even once, I'd appreciate your comments.  Thanks in advance.

  -start-up of the main script, movie named "main script.

  on startMovie

  _movie.idleHandlerPeriod = 0

  end

  on mouseDown

  Bullet = script ("ball script") .new)

  end

  -end of movie script
  -start of the script of the frame, frame script named 'script-framework '.
  on exitFrame me
  go part
  end
  -end of the frame script
  -beginning of the script of the ball, parent of script named "ball script."
  bulletSp property

  minY property

  pObjTimer property

  the new me

  -create sprite

  -find an empty channel from the channel in the foreground

  CNT = _movie.channel.count

  Repeat with i = cnt until 1

  If sprite (i) .member = (member 0 castLib 0) then

  -make sprite

  bulletSp = channel (i) .makeScriptedSprite (member ("bullet"), _mouse.mouseLoc)

  bulletSp.scriptInstanceList.add (me)

  minY =-(member("bullet").height)

  -start moving the ball

  pObjTimer = timeout () .new ('ball' & i, 3, #moveBullet, me)

  output of repetition

  end if

  end repeat

  return to me

  end

  on moveBullet me, _objTimer

  bulletSp.locV = bulletSp.locV - 1

  sendAllSprites (#collisionTest, me)

  If bulletSp.locV<= miny="" then="">

  me. Destroy()

  end if

  end

  to destroy me

  pObjTimer.forget)

  Channel (bulletSp.spriteNum) .removeScriptedSprite)

  end

  -end of the script of the ball
  -beginning of the collision test script, script behavior called "script of collision."
  on collisionTest me, _spOrg
  If sprite (_spOrg.spriteNum) .intersects (sprite (me.spriteNum)) then
  sendSprite (_spOrg.spriteNum, #destroy)
  end if
  end
  -end of the collision test script
  1 paste the script 'major' in one of the film's script and give it the same name.
  2. double-click on frame 1 in the script to frame channel and past the image inside script.
  3. create a new script, assign a Parent script in the property inspector and stick the ball in there script. Name it "script of ball."
  4. create a new script, assign a script of behavior in the property inspector and passed the test of collision inside script. Name it "script of collision."
  5. create an image of the ball and make sure the registration point is defined to be at the high point of the ball. Name the image of Member 'ball '.
  6 Create rectangle shapes to the top of the screen, and then drag and drop the script "collision" on them.
  7 press the Play button and move the mouse around the scene while clicking the left button of the mouse to shoot bullets. The balls will be destroyed when they reach the top of the scene or when they hit a rectangle.
  8 study scripts. If you need the commented code, or a more complete explanation/walk-through of what happens in the code then let me know and I'll give it.

• multiple instances of internet explore in my task manager

  Why are there multiple instances of internet explore in my task manager when I open only one page?

  Hello

  IE uses smaller instances of itself to support tabs and correction of errors and it is normal for IE8. In fact
  It uses far fewer resources as well as the opening of 2 or more instances to access several pages. If you
  Open several tabs, and then still more small instances of Internet Explorer will be opened to support these tabs and error correction.

  So basically, everything is normal.

  Multiple Instances of iexplore.exe run when using Internet Explorer 8
  http://www.Winhelponline.com/blog/multiple-instances-of-iexploreexe-run-when-using-Internet-Explorer-8/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Explorer 8 opens multiple instances of rundll32.exe when closing

  When I close Explorer 8, rundll32.exe opens multiple instances and memory in the Task Manager go to more than 800,000 for each instance. After running this ram computer and virtually lock up the computer. If I stop the process, everything works normally until I opens and closes Explorer 8. It is repeatable and consistent.

  I use Vista Business, 4 concerts, Dell Latitude D830. Rundll32.exe have searched and found only one instance... located in C:\Windows\System32. I ran several programs of virus and malware and can't find any problems. Register is also good.

  I had similar problems with changing app crash of video files in a folder list to views of large icons.  I sent a problem report and in return had a fix, I unfortunately deleted after it corrected my problem.   I had to go to the command promp
  and in C:\Windows\System32 I had to modify the command that has been something like the pointed out below.

  Fault Module name: Mpeg2Parser.ax
  I think that if you send an error report that you receive a solution.

  It's because of the problem I had.
  Product

  Windows host process (Rundll32)

  Problem

  Stopped working

  Date

  18/06/2009 15:58

  Status

  More information

  Signature of the problem

  Additional information about the problem

  Bucket ID: 376914080

  Problem event name: APPCRASH

  Application name: RunDLL32.exe

  Application version: 6.0.6000.16386

  Application timestamp: 4549b0e1

  Fault Module name: Mpeg2Parser.ax

  Fault Module Version: 1.2.0.79

  Timestamp of Module error: 38e280dd

  Exception code: c0000005

  Exception offset: 00006210

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 2057

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

• Impossible to find a solution to control the next dates on multiple instances of the entity.

  Hello

  I have a simple scenario. I have two instances of an entity that match two records of a component of bussiness in Siebel. I need to put a validation that the date of the end of an instance is the eve of the start date of the other.

  Using the functions Nextdate() etc. can be useful within the same instance, but the way to check on multiple instances?

  Any suggestion is welcome.

  If you want to exclude from the last instance, there are two options. You can set a Global attribute to the start date of the last session, for example

  the date of beginning of last session = InstanceMaximum (sessions, the start date of the session)

  ... then use this attribute as a filter in your other rules. If there are some things where you want to run the logic on the same subset of instances (e.g., the subset that excludes the last instance), then it might be useful to create an inferred relationship:

  1. in the properties file, create one-to-many relationship overall to the session. (Relationships that will be deducted must always be on many-to-many.)

  2. give the new relationship a unique and descriptive name for example 'the sessions (excluding the last session) '.

  3. write a membership rule to determine which instances of the entity are part of the new relationship, for example

  the session is a member of the sessions (excluding the last session), if

  start date of the session< the="" start="" date="" of="" the="" latest="">

  4. When you want to redo the subset of instances of logic, use the relationship 'the sessions (excluding the last session)' rather than 'the sessions', for example

  the end dates of the sessions are valid if

  ForAll (sessions (excluding the last session), the session end date is certain)

  Using the cross-entity argument version of my example above, the following rule could be set to TRUE:

  the end dates of the sessions are valid if

  ForAll (sessions (excluding the last session), the session end date is certain)

  Whereas this rule would have the value FALSE:

  the end dates of the sessions are valid if

  ForAll (sessions, the closing date of the session is certain)

  I hope that gives you enough to continue their career with your specific scenario!

  See you soon,.

  Jasmine

• Multiple instances do not have parallel job using scripts on Windows Server

  Hi all

  I download after effects template on my site, the user came and download the desired content.

  I'm updating the model using scripts with the content of the user and then video rendering and therefore user get video with his text/images uploaded etc.

  its working perfectly when I update a unique model, but when multiple users come at the same time, then they need multiple instances of sequels

  so I opened multiple instances of after-effects by using "m" with after having shortened the effects

  

  After looking at the windows Task Manager, there are two instances, but the problem is

  one continuous instance and the other stop, at the end of the trial the second still paused state

  

  I need 2.3 4 or any case to work in parallel without pause/stop

  I am using windows server 2008 R2 with installed XAMP

  It's a Setup completely unsupported in first place and you will be difficult to find someone who can help you. Probably, you will need to create separate shortcuts / files in batches and run them in separate instance contexts. AE itself always detects running instances and reuse.

  Mylenium

• Company that multiple instances cannot start with port set to 80

  I have three instances: main forum is for cfadmin site, then, two are my websites.

  cfusion-> site cfadmin - port http < white - > remote port 8014 - host localhost - cluster no

  cfusion2-> site 1 - port 80 - remote port 8012 http - host localhost - cluster no

  cfusion3-> 2 - port 8501 http site - remote port 8011 - host localhost - cluster no

  cfusion2 does not start and the instance Manager page refreshes just without message, and there is no log system or cf with errors. I use the Chrome browser, I gave up on Internet Explorer (event after adding the sites to the safe zone).

  I then configure the third-party site using WSCONFIG in the hope that it will use cfusion3 server but on the contrary it is selected automatically cfusion.

  I could really use some help here. Thanks in advance.

  Well, I received my case running and each with its own windows service. More I don't get the blank page of death, and I did not manually change the configuration files in order to make this work.

  When CF instances are created, it creates a copy of the file cfusion for himself. and so in itself, there's also a runtime/bin folder that contains the WSCONFIG tool. So rather than create a CF Connector for my IIS sites using the main cfusion WSCONFIG tool I had use every tool within each instance. Many of you probably already knew that.

  It was recommended by Anit Kumar to activate the embedded server so that port 8500 is busy before creating instances so that the newly created instances do not automatically pick up port 8500.

  Thanks to Alexis who helped every step of the way and that got my server correctly setup.

  For anyone doing a new installation on windows server, be sure to run the installer with administrator rights. In addition, make sure that your cf installation folder has the appropriate permissions. Initially, I gave everyone full control of my installation folder, then after its installation and work I started to follow the recommendations of Peter CF 11 Lockdown Guide permissions. follow http://www.Adobe.com/content/dam/Adobe/en/products/ColdFusion/PDFs/cf11/cf11-Lockdown-GUID

  Adobe CF, could you guys add some stuff and how simple instructions on the page instance in CF Administrator Manager? He must know that bodies have their own WSCONFIG tool and should be used for the planned sites. Also, I think that additional instances should start with port 8501, 8500 should be left alone for the integrated server option. This could avoid installation problems. Oooh, also if possible in the instance Manager add an action button that opens its own WSCONFIG tool. Action can be called "add a website".

• Workstation 7 on Win7, multiple instances of the taskbar

  When you run VMWare Workstation 7 on Windows 7, VMWare offers systematically there are multiple instances running.  1 for the application itself and 1 for each tab open in the application, regardless of its status running.  It's very confusing when I usually 5-6 tabs open, but only 1 of them is actually being run.  I know there is an icon on the top of each preview indicating if it is suspended or running, but a quick glance, it is difficult to find a case running.

  Is it possible to have only 1 instance of taskbar or display only the virtual machines running in the taskbar, instead of each of them?

  There is no configuration parameter to control the Aero thumbnails, but we had other requests specifically question that makes it more obvious that VMs are suspended and who are running (since they both show a screenshot and are differentiated only by the icon). It is being investigated for a future version of Workstation.

• Creating multiple instances of a custom taskflow: how?

  I use JDEV 11.1.1.5.0 and we use WebCenter PS4.
  
  
  Our previous developer created a calendar countdown / count down timer. When I try to create a copy of it from within Web Center Mashup > task flow page I have a few problems:
  
  1. If I change the settings of task flow, such as the title or the time format (minutes, hours, or days are the options) - these changes do not appear on the page itself. He always uses the same values as the original task flow that I copied from.
  
  2. I've noticed that in the Page Fragment and the definition of the taskFlowId Page points to "/ WEB-INF/ScheduleWidget #ScheduleWidget. Id = "' is the same for each completed copy of the original workflow."
  
  
  What I would do, is to have the ability to create multiple instances of this workflow even at the breast of a single space, but right now they are the only things that stop to occur.

  Hello

  JavaScript does not have workflows and so is not isolate the invocations to son. Bottom line is that your use of JS must be improved.

  Actually what you are calling a single JavaScript function, which will exist only as a single instance on the page. What you need to do is rather than for each call JS workflow, you must create a separate JS object that is then used with this workflow. Ultimately you would have as many instances created JS object as task on one page (at the moment you don't have that, and instead, you use a single variable). As I see it, what you have to do is

  -for starting workflows, call JS in Java (or a region controller)
  1. create a new object ' cdtime ($(this) new.attr("id"), ' ${pageFlowScope.counterDate} ");
  2. register the object in a variable of page with a key identifying the workflow as it is used with/for the
  -Workflow then use you the client listener to access the timer for this workflow. For example, you can pass an argument to the JS function so that he knows which instance of timer for your registry level JS page object (probably a map)

  Frank

  Published by: Frank Nimphius, February 23, 2012 10:33

• Re-defining a variable for multiple instances

  The code below is inside a loop to create multiple instances of a class that place markers on the scene. The event handler opens a panel of information when a marker is clicked the first time and closed when you click the second time. However, I want to set the value of fenetreouvrir to false for all markers every time a window is closed. My problem is that I don't know how to create a loop for this.

  You might be able to make the fenetreouvrir a marker property itself (encapsulation) and let the marker to manage internally what you describe. Setting fenetreouvrir to false for all the markers might be a marker class method.

• Multiple instances, simple applications of level

  Hi all
  
  I'm looking for a little guidance regarding having 2 separate EBS database instances, working from a single mid level Apps 11.5.10.
  I spent a few hours trying to dig up information on this topic (Metalink/internet), but most of the searches return top Appl sharing information of for multi mid level of nodes.
  
  Is it possible to run 2 databases under a middle layer? or should I clone just the whole environment? If possible, a link some with additional reading would be most appreciated.
  
  Thanks for any help.
  
  
  Andy.

  Hello

  You cannot configure the application for access to multiple databases at the same time. However, you can have multiple instances (CAR database) within a single application layer files - see (Note: 403347.1 - MAA road map for E-Business Suite) for more details.

  Kind regards
  Hussein

• How can I hide/show toolbar again operate independently on multiple instances of firefox?

  I run two instances of firefox.exe. One for the left monitor and one for the right. There is a toolbar that I want to see on the right screen, but I don't want to see it on the left screen. This used never to be a problem, but it is now. It seems as if well now why show/hide toolbars are inextricably linked, and by changing or watching a toolbar on a single instance simultaneously causes the exact change even on the other open instance. I'm hoping that it could be a simple solution to this effect in the subject: config, however, I would rather not tamper with these settings until I'm sure that settings with the fix for this particular problem.

  Thank you for your attention and for taking the time to read this post.

  Sincerely;
  DC

  Toolbar settings are common to all windows open in this instance of Firefox.
  I don't know if there is an extension that allows to fix this dependent window, so you can check the website of modules.
  If you can't find one then you would use a second instance with its own profile.

  You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • https://developer.Mozilla.org/Mozilla/Multiple_Firefox_Profiles
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• Question about multiple instances of Thunderbird running at the same time

  I read that when you start Thunderbird by clicking on its icon or the shortcut must only load once, even if you click on it several times. It should be just a window of TB. If I click on the shortcut/TB desktop icon, it behaves like that. I can click several times and that a single TB window will open and be active.

  However, if I run the 'quick launch' TB on my windows 8.1 (or no matter what windows) taskbar, I get mulitple TB windows to open, as much as I want. So if I click on TB icon in the quick launch once, I get a single instance of it. Twice, I get two, and etc. In the quick launch any program behaves like that. He starts programs with a single click and launch again and again.

  Only, I click it once and get an instance which is good and how it should be. But this behavior with the quick launch is ok? It must do this not with Thunderbird? Thank you.

  There is usually no advantage by running multiple instances of Thunderbird, unless specifically do you these race with different profiles. In practice, if they are allowed to use the same profile, the first Thunderbird should should acquire the profile and therefore block the others, although this may not become apparent until you try to salvage something, for example, a message, or to change certain settings.

  Your multiple Thunderbird work successfully? They all show the same mixture of accounts, folders and address books? Can all or part of them save and make changes?

  If this is the expected behavior, (i.e. some "typical" windows) I do not like; He does not play well with profile blocking and I think that lead to problems.

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• running multiple instances of VBAI does not work

  Hello everyone,

  We are 4 common examples of VBAI at the same time. Recently, he had to copy it (because production is doubly).

  With our first system, we have no problems when you try to run multiple instances of VBAI. This time, however, it does not.

  Our system:

  • 4 cams: Allied Manta 201
  
  
  • camera is triggered (rising edge) separately, but almost simultaneously.
  
  
  • Four port NIC (with the right driver :-))
  
  
  • 4 ports and our on-noard port are bridged.
  
  
  • computer: intel I5 (4 cores)
  
  
  • License to run Vision Builder 2012.
  
  
  • Programmed with Vision Builder HAVE 2012.
  
  
  • Interface programmed in c# (receives images of the relevant info 4 programs and displays on the screen).

  Action taken:

  • Test with our program that opens 4 instances of VBAI. Result: 1 single instance opens.
  
  
  • Removed our bridge a connected our cams on a switch. Result: 1 single instance opens.
  
  
  • Open VBAI 4 VBAI-programs directly (but separately). Result: Each program opens and is fully working.
  
  
  • Open 2 programs at the same time (with VBAI). Result: Fist opens and is equipped with the work. At the opening of the second program, that we get error messages saying that it is not possible to connect with our camera.
  
  
  • The test above was created with:
  
  
  1. The cam connected to our network card 4 ports.
  
  
  2. The cam connected through a switch.
  
  
  • I have also written 4 simple programs (just enter a period followed by image)
  
  
  • With these programs, I tried the above test (VBAI 2 hours and run both programs at the same time). Same problem: 1programs starts, the error messages when opening a second program.

  I have the impression that it's a network problem, but what bothers me is that, when the bridge, I don't see a difference with our another computer that works on our original assemblyline. When you work on a referral that our parameters are the same as on a computer that does not have a network card 4 ports. The computer (and liked)) allows us to run multiple instances.

  Any thoughts?

  Any help would be greatly appreciated. I'm sure I'm missing something obvious here, but I don't really see.

  If you need more information about something, let me know.

  With sincere friendships.
  Tom Declercq