rule on a machine swap space virtual vmware.

Similar Questions

• How to find out really currently used physical memory and swap space of hard disk to the virtual computer running?

  Suppose that I'm leaving WinXP hostOS a guestOS. Then a part of this guestOS remain in physical memory and another part is deployed on hard drive in the swap file resp swap partition.

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  Perhaps only a *.vmdk 800 MB / 3GB is really responsible. But these 800 MB could be extended to 2 GB, because the content of these 800 MB is not compressed during load or guestOS drivers allocate additional memory.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Matt

  mattad wrote:

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  The vmdk is not loaded into memory, because it is the drive of the virtual machine.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  Yes, of course not. The memory used by the client is not related to the size of hard but the RAM assigned in the options of hardware reviews.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Open the Task Manager and find a task vmware - vmx.exe or vmware-vmx - debug.exe.

  The swap file should be used if you have chosen to allow that VMware Workstation is authorized to Exchange. The file where swaps to door expansion .vmem Workstation. Search folder of comments.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Restrict the movement of files to physical machine to the Virtual Office (vmware view)

  Hi all

  I have a question, I am using virtual desktop with vmware view. I'm on a physical machine using this machine that I log on to the virtual machine using office remotely. (vmware view). My question is that I don't want the users of the physical machine to copy and paste the files of the virtual machine and vice versa.

  When I open virtual desktop, go to my computer, I see drive c (virtual machine disk) and then share the disks of the physical machine. When I click on them, they open and then I am able to copy all files in this shared folder on the virtual desktop. I want to restrict any idea how could I go about this. Help, please.

  Arun N

  Using RDP?

  In this case, you can use GPO (virtual desktop) to disable drive sharing.

  André

• How does the merger decide how much swap space is needed when I create a CentOS guest

  I use Fusion 7 on MacBook Pro with 16 GB of RAM on OS X Yosemite. I created a VM with 4BG of RAM, but I myself only 1983 MB of swap space. I created an another VM with 2 GB of RAM and got 3999MB of swap space. Is there a formula to follow? Thank you.

  Here's what I found on the CentOS document on rules of swap space:

  https://www.CentOS.org/docs/5/HTML/Deployment_Guide-en-us/ch-swapspace.html

  I don't know how VMware products to determine what size to make the swap partition, or important to me personally because I do not use the Easy Install feature should not you if you do not want to accept the default values it uses.

  There are three basic choices, installation of a guest operating system... Using the Easy Install, manually by browsing setup of operating systems accepting the default values along the way and or modification in addition the installation along the way.  Specifically with regard to the vHDD, you can choose manually set how the disk will be partitioned partitioning and the size of the partitions.  For example, you can choose any size you want for the swap partition.

• Problem restarting Oracle Linux 5.6 after adding Swap space

  People,

  Hello. I use Oracle Linux 5.6 on top 3 VMPlayer.

  Because of OS Swap space is 0 KB, I add some Swap space to the root user with the following command:

  If DD \u003d/dev/zero of = / swapfile bs = 1024 count = 2097152

  mkswap /swapfile

  The swap space is added. Then I add the following line to the file "/ etc/fstab:

  /swapfile swap swap defaults 0 0

  Then I reboot Oracle Linux 5.6 in order to take effect. But Oracle Linux 5.6 cannot restart. During the restart process, the error message appears:

  "check the file system error...". »

  Press Ctrl + D to continue.

  Repair file system. #

  Then I login inot file system and open the file "/ etc/fstab ' to remove the following line:

  /swapfile swap swap defaults 0 0

  But the file/etc/fstab is read only and cannot be changed.

  I don't understand what causes not Oracle Linux 5.6 can not restart.

  Any folk that understand how to solve the problem to restart Oracle Linux 5.6?

  Thank you.

  the easy way is to use a Linux LiveCD and remove the bad fstab entry

  so I just add a second disk to the virtual machine and use it as a swap space

• convert not up against physical machine to a virtual machine?

  Hello

  My problem is: I have a laptop which is broken due to a hardware problem. I removed the system drive and connected via USB on another machine that is running VMWare.

  When I tried to convert it with VMWare Workstation, there was only the possibility of converting the local system running.

  Is there another way to convert this outstanding system (Vista) on the external hard drive in an ACE VM?

  Thanks for help

  Hello

  ignore previous posts - this procedure is the smartest for the work

  create the new virtual machine - add drive - tell physical disk and select the drive in the case of USB - name dthe disc original.vmdk

  Then exit VMware and open a cmd.

  Change directory for vmware-install dir and run vmware-vdiskmanager.

  Read the examples of syntax - then convert the physical disk (originall.vmdk) in an import.vmdk named a virtual - store where you have enough disk space.

  Conversion will take awhile--what doen you can remove the USB cover.

  When doneopen new VMware - launch of the new virtual machine and remove original.vmdk - replace with import.vmdk.

  Last step is to reconfigure with converter - specify the newly created virtual computer vmx-file

  fact

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Error when changing the settings of the particular virtual machine to a virtual machine?

  When attempting to change the setting of the virtual machine to a virtual computer on a stand-alone ESXi 4.1 host (this is also the only VM on that), we get the error message next to the VI Client.

  Call 'EnvironmentBrowser.QueryConfigTarget' to object 'envbrowser-114 "on vCenter Server 'vCenter Server Name' failed.

  However, if we connect to the ESXi host through the client, we are able to change the settings of the virtual machine.

  Is there any Member have such experience?

  Thank you

  Hello

  You went through following KB article?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2006615

  Hope it helps

• You can not power on a virtual machine on a virtual computer

  Host of vSphere 4.0, set up a VM B with vSphere 4.0. The use of the VM-B as a host (call it host B), set up an another VM C. Power on the VM C on the host than b. received the error message:

  You can not power on a virtual machine on a virtual computer.

  How can I solve this problem?

  Thank you.

  George

  Hello George,.

  order on the nested virtual machines, you must set monitor_control.restrict_backdoor = "TRUE"

  See http://www.vcritical.com/2009/05/vmware-esx-4-can-even-virtualize-itself/

  André

• Oracle Developer Suite 10 g - Windows 7 - swap space problems

  Hi brothers and sisters.
  
  Hope that you are well. I am facing problems of swap space when installing Oracle Developer Suite 10 g on Windows 7. I downloaded and installed Oracle Database 11 g Express Edition successfully and that it works correctly. Now, I downloaded the two files
  a. ds_windows_x86_101202_disk1,
  ds_windows_x86_101202_disk2 b.
  
  to install Oracle Developer Suite 10 g with Windows 7 Ultimate. The Oracle Universal Installer spent the following questions:
  version of the operating system.
  (b) monitor
  
  But when checking swap space, it gives a message, '0 MB of available space, 1535 MB' required, failed. I have 2 GB of RAM installed and system managed paging that is currently assigned to 2038 MB in my system file space.
  
  Please solve me the problem.
  
  Noor

  increase the virtual memory of the system for the reader to the BONE.

  Visit this link
  http://Hamid-Oracle.blogspot.com/2011/06/how-to-install-Oracle-Developer-Suite.html

  also check out this link.

  Re: error installing oracle forms 11g release 2

  Hope this helps

  If someone response is correct or helpful, a mark accordingly. and if the answer brand responded.

  Published by: HamidHelal on June 27, 2012 14:28

• You cannot power on a virtual machine in a virtual machine

  Hello

  Only, I converted a physical blade to a virtual machine running on ESX4 using VMware converter 4. The converted virtual computer is running VMware server 1.0.5 and machines virtual option 2. After the P2V process, I am unable to power on virtual machines in VMware server. I get the following message:

  You cannot power on a virtual machine in a virtual machine

  I see there are some entries that I can put in the vmx file

  monitor_control.vt32 = 'TRUE '.

  monitor_control.restrict_backdoor = 'TRUE '.

  However, this does not solve my problem. Is it possible to edit a VMX VMware Server so the virtual prompt runs in a virtual machine of ESX4

  Thanks in advance

  Oli

  VMware Server 1.x does not support nested virtual machines.  Workstation 7 is the first product with the official support of virtualization nested, although other recent VMware products should work, with some constraints.  See nested running VMs.

• Turn on the virtual machine in a virtual machine

  I configured ESX 3.5 on Workstation 6.5 on my laptop and created a virtual machine inside the ESX. Now, I'm not able to power on this virtual machine, it says - can feed on a virtual machine in a virtual machine.

  Is there a solution?

  NUTZ

  VCP 3.5

  (Preparation for VCP 4)

  You must manually change your ESX virtual .vmx file and add this line:

  monitor_control.restrict_backdoor = TRUE

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• How to start vritual machine on vSphere virtual server

  Hi all

  I would like to start the virtual machine on vsphere virtual server. Unfortunatelly when I try to start it I see the message:

  "You can not on virtual machine in the virtual machine.

  I found a solution on google but only worked for vSphere4 virtual server.

  Thanks in advance

  Artur

  Always the same answer. You must edit the .vmx for your servers files virtual vSphere.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• How to move a virtual machine from one virtual switch to the other since the SDK / command line?

  How to move a virtual machine from one virtual switch to the other since the SDK / command line?

  Joshua Smith

  Are you referring to the evolution of the virtual machines network portgroup of one to the other and in your case potentially issue on to another vSwitch? If so, take a look at this script: updateVMPortgroup.pl everything you do really makes a call to ReconfigVM_Task() and passing in a specification change and put to day the network in which you want to change

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• Convert a machine physics linux virtual

  Hello, how can I convert a physical machine to a virtual Linux?

  What steps should be followed?

  VMware ESX Server 3.5 update2

  Thank you

  Marcos da Rosa

  Use it and point the virtual image to convert on your host

  http://www.VMware.com/products/converter/

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• merge multiple physical machines in a virtual

  Hello

  can merge us multiple physical machines in a virtual one? If yes how?

  Thank you.

  Migrate a lot into ONE? Or migrate many virtual medical tests a lot?

  To the subject of one, it isn't not possible with a tool as the tools just prepare the operating system to run on virtual hardware. But it does not work tpuch applications running on the machine. If you want to migrate multiple servers in a single, you P2V one of them and reinstall the applications of other servers on this machine.

  If you want to reach it, yes it is possible with VMware Converter.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP/vExpert 2009