Rules for access to our network of outside using Telnet service

Similar Questions

• Password for access TL96 on network

  Hi, when I browse my TV on my LAN IP address I'm invited for a user name and password. What are the default settings?

  Thank you

  Hello

  If this username and default password is required, you should be able to find it in the user manual.
  But I m wondering why go you to the TV during the INVESTIGATION period?

  You can connect the TV to the home network and the support of menu TV Toshiba some options for access to the network. In Media Player, you can find the USB media player and the Player multimedia network. To access the video and picutres you must use the 2nd option (network drive)

• Rule for access to documents on a server

  Hello

  How to create a rule that allows recovering files .xls and .doc for an internal intranet site and still block extraction of files from another server to Internet Explorer.

  At the present time CSA keeps popping up asking you want to allow this?

  "The process"C:\Program may Explorer\iexplore.exe"(as user XXX\admin) tried the open/create file"C:\Documents and admin Settings\Temporary Internet Files\Content.IE5\WTRRRTQZ\CompanyExpensesForm[1].xls"and the user was questioned. The user responded by choosing "Yes to all". "

  This is section 321

  Thanks for any help

  Do not know the pickiness issue but it seems that the rule of module Office 321 allows downloads.

  If you have the DAC to work, you could add the desktop module and change the 321 rule to deny file access control.

  Which could serve as the corresponding deny rule, that I mentioned earlier. It seems that the rule of module Office 321 replaces your DAC and allows downloads.

• Bis for access to the network

  Hi guys, I am a newebie to the blackberry java development, and ive read several topics and questions. I'm working on the development of an application that requires network support, essentially BIS. But from what ive read, seems that you must be a member of the alliance to cm BIS-B. Saw something on the use of BIS-push. I want to know if I "l be able to use the BIS to connect to a server when you use BIS-push for free, because I couldn't find much info about it.

  Welcome.

  "I want to know if I" l be able to use BIS to connect to a server when you use the BIS-push for free.

  Yes - as described here:

  http://supportforums.BlackBerry.com/T5/Java-development/sample-HTTP-connection-code-and-bis-B-access...

• RADIUS authentication fails for one of our network device

  5.1 of the ACS is default for authentication authentication Ganymede to the ASA firewall, becomes

  That's what I suspected. You will have to write off the primary secondary ACS. Configure the appropriate ACS secondary clock and time zone to match both domain controllers. Both the change in the clock and time zone change will restart the ACS secondary services for the changes to take effect.

  After you have configured the time comes, we should "Test connection" against AD from the ACS on the secondary interface. As soon as he gets that we can go ahead and save changes and also register for the secondary back to the primary.

  This should solve the problem.

  Kind regards.

• How to install camera codec Pack on our network?

  I want to install this pack of codecs on our network. By using an Msi file. Is this possible? If so, how?

  I guess you have to take the help of the TechNet forums.

• Problems to make the access rule for a NAT device work

  I am new to Cisco routers so light easy on me.

  Our company has just purchased a RV042G so that we can start using VPN for some of our sales representatives.  There is always a need to access the RDC to configure our WAN1 port access rule to the internal server.  However, it does not work.

  I have install this type of rule on Sonicwalls before, but I don't have much experience with Cisco.  I'm a bit confused as to why it doesn't work anymore.  Any advice would be great.

  Service = DRC (3389)

  Source port = WAN1

  Source IP = our static IP address

  Destination IP = 192.168.0.250.

  What I am doing wrong?

  Hello Eric,

  Looks like you got the first step made so fare. How access lists works on this devices is actually just control/allow certain traffic but does not in fact of NAT/port forwarding. What you need to do is then go into the setup and go under transfer. Next, you will create your port forwarding it. You click on service management again to set up which port you must sent (it may be already there for when you have configured your access list). Some of them should be similar on how you implemented in the access list, but if you want more information let me know and I can give more details.

  Hope that helps out.

  Thank you
  Clayton Sill

• I can't access to our private internet connection... I get the error messages like acquiring network address AND identity validation

  problem network address acquisition
  I can't access to our private internet connection... I get error messages like acquiring network address AND validation of identity no matter how long I wait nothing happens... Please help me.

  create a new internet connection or reset TCP/IP socket

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• I can map a network drive by using the appropriate credentials, but access is denied (by default local account for navigation)

  I have a laptop running XP SP3.  If I connect locally to the laptop and you try to map a network from a server drive on my network, it invites me for a username and password that I offer and the player must then be mapped.  The problem is that when I click on the new player, I get an access denied message.  It tries to connect to the share with my local account that has no access privileges.  Previously it tempt me a username and password, but apparently, I changed some security settings and it doesn't do this more.

  The same thing happens if I use the command net use.  I can map the drive by providing an appropriate user name and password, but I can't browse it in windows Explorer.  I really want to understand the context that controls if you get a prompt when you access a resource on the network.  I think that it is related to the setting of security strategy for network access: sharing and security for local accounts.  I played a bit with it, but in vain.

  I realize that I could probably add an account with the same username / password for my local account on the server and give access to my file shared.  I don't want to do that.  I have several users who share the laptop and access the local account access (I realize this is not ideal, but it is inevitable at the present time).  I don't want to have access to this network share.

  Can someone help me get my login prompt?  I searched on google for the last 2 days trying all kinds of suggested solutions, but I couldn't find one that works.

  Too bad... I was hoping that was the problem.  But at least it now asks you a name of user and password :-)

  Apart from that, you could look to make sure that NetBios over TCP (NetBT) is enabled on the client.  Deactivation of this force a direct hosting of SMB which sometimes has problems.

  "Hosting of SMB over TCP/IP direct".
  <>http://support.Microsoft.com/kb/204279 >

  Your latest comments seem to point to a followed initial connection or bad connect more or maybe you is not authenticated as expected.  A few quick tests, I did showed that if you connect using TCP/IP address instead of the computer name and specify everything, including the scope of user name online net "use", it reduces the network traffic needed to establish a connection.  As a test on a client, from a command prompt, try a syntax such as:

  NET use * \\192.168.1.10\share /user:192.168.1.10\username password

  Where "192.168.1.10" is the IP address of the server, 'share' is the name of the action that you want to connect to and "username" is the local user on the server to which you authenticate you.  If you use domain identification information, substutite for "192.168.1.10" domain name in the "/ user:" part.  If you log to a local account server from a name of user and password graphic prompt, try to including the name of the computer and the user name in the user name as in Nom_ordinateur\Nom_utilisateur area.  If it does not, unless there is really something wrong with the access permissions, I'm out of ideas.

  Good luck
  JW

• Update Windows 7 pro (10 users) network January 1, 2013. Now, for more than 4 users connect an access across the network apps stop apparently. Any thoughts?

  Update Windows 7 pro (10 users) network January 1, 2013.

  Now, for more than 4 users connect an access across the network apps stop apparently.

  Any thoughts?

  Hello

  Your question is beyond the scope of these forums. Please ask your question in the following forum.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Concerning

• I need an Acrobat Pro for multiple users in our network

  I need an Acrobat Pro for multiple users in our network

  If it is a matter of purchase, you should contact the sales department.

• Server configuration for access outside a LAN EBS 11i

  Hi all
  
  I have Oracle Apps 11.5.10.2 running on a Windows 2003 SP2 OS Server, behind a wireless router.
  
  I am able to access within the network, but I can't connect to the server from an IP address outside of my wireless network. Please let me know how to set up my wireless router /apps server allowing access to users outside the network.
  
  I use a Linksys WRT150N wireless router. I have configured the IP address of the server to be static.
  
  
  Thank you
  RK

  Hello

  Please let me know how to set up my wireless router /apps server allowing access to users outside the network.

  Please refer to (Note: 287176.1 - DMZ Configuration with Oracle E-Business Suite 11i).

  Kind regards
  Hussein

• Error 1606.Could access location %APPDATA%\ network When uninstalling and installing Java for vista

  I get "Error 1606.Could access location %APPDATA%\ network." "When I try unistalling Java (TM) 6 Update 5 and Java (TM) 6 Update 20 and when I try to download the latest version of java (25) Ive tried a lot to get rid of the problem, but nothing I tried seemed to help."

  Windows Vista 64-bit.

  Have you tried:

  1. http://support.Microsoft.com/kb/2258121
  2. http://support.Microsoft.com/kb/886549
  3. Create a new administrator account and try to install using this account.

• Unable to access an internal network while being connected with VPN

  Hello

  We have a PIX 515E with a remote access vpn.

  Our internal network has an address network 192.168.1.0/24, and addresses we assign to vpn clients are 192.168.1.49 - 192.168.1.62, or 192.168.1.48/28.

  When I connect to the vpn, I cannot ping none of my hosts internal. The error I get is "no group of translation not found for icmp src:...» »

  It is quite clear that I would need a NAT rule, but why? Addresses are in the same network...

  Could someone enlighten me on how I should proceed to nat traffic between vpn clients and the internal network?

  Thank you.

  Here is my current setup:

  6.3 (1) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  Auto interface ethernet2

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  nameif dmz security50 ethernet2

  activate the password * encrypted

  passwd * encrypted

  hostname pix

  domain callio.com

  outside_inbound list access permit tcp any host 66 *. **. * eq www

  outside_inbound list access permit tcp any host 66 *. **. * eq https

  outside_inbound list of access permit udp any host 66 *. **. * Log domain eq

  outside_inbound list access permit tcp any host 66 *. **. * Log domain eq

  outside_inbound list access permit tcp any host 66 *. **. * object-group mailserver

  outside_inbound list access permit tcp any host 66 *. **. * Newspaper ftp object-group 5

  outside_inbound list access permit tcp any host 66 *. **. * eq 9999 journal 5

  outside_inbound list access permit tcp any host 66 *. **. * eq www

  outside_inbound list access permit tcp any host 66 *. **. * eq www

  access-list outside_inbound udp host 66 license *. **. * Welcome 66 *. **. * eq syslog

  outside_inbound deny ip access list a whole

  pager lines 24

  IP address outside 66 *. **. * 255.255.255.240

  IP address inside 192.168.1.1 255.255.255.0

  IP dmz 192.168.2.1 255.255.255.0

  IP verify reverse path to the outside interface

  local pool IP VPN-RemoteAccess 192.168.1.49 - 192.168.1.62

  ARP timeout 14400

  Global (outside) 10 66 *. **. * netmask 255.255.255.0

  NAT (inside) 0-list of access no_nat_dmz

  NAT (inside) 10 192.168.1.0 255.255.255.0 0 0

  static (dmz, outside) 66 *. **. * c4 netmask 255.255.255.255 0 0

  static (dmz, outside) 66 *. **. * 192.168.2.3 netmask 255.255.255.255 0 0

  static (dmz, outside) 66 *. **. * 192.168.2.5 netmask 255.255.255.255 0 0

  static (dmz, outside) 66 *. **. * 192.168.2.6 netmask 255.255.255.255 0 0

  static (dmz, outside) 66 *. **. * 192.168.2.100 netmask 255.255.255.255 0 0

  static (inside, dmz) 192.168.1.0 192.168.1.0 netmask 255.255.255.0 0 0

  Access-group outside_inbound in interface outside

  Route outside 0.0.0.0 0.0.0.0 66 *. **. * 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  NTP server 199.212.17.15 source outdoors

  Enable http server

  http 192.168.1.101 255.255.255.255 inside

  http 192.168.1.105 255.255.255.255 inside

  SNMP-server host inside 192.168.1.105

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Sysopt connection permit-pptp

  Telnet timeout 5

  SSH 192.168.1.105 255.255.255.255 inside

  SSH timeout 5

  Console timeout 0

  VPDN PPTP VPN group accept dialin pptp

  VPDN group VPN-PPTP ppp mschap authentication

  VPDN group VPN-PPTP ppp mppe auto encryption required

  the client configuration address local VPN-RemoteAccess VPDN group PPTP VPN

  VPDN group VPN-PPTP client configuration dns 192.168.1.2

  VPDN group VPN-PPTP pptp echo 60

  authentication of VPN-PPTP client to the Group local VPDN

  VPDN username someuser password *.

  VPDN allow outside

  Terminal width 80

  Please use the following URL to check your config:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml

  I hope this helps.

  Jay