Server configuration for access outside a LAN EBS 11i

Similar Questions

• Correct configuration for access Fiber Channel AAA

  Hello all, I have searched for the correct configuration access the MDS 9124 fibre channel passes to the CSACS 1121 with 5.4.

  I find pieces, but I'm probably set up groups incorrectly.

  On the side of the switch, I have this:

  FiberA (config) # executed sho | include the aaa

  AAA server Ganymede group + sasTac +.

  AAA server Ganymede group + yokTac +.

  RADIUS AAA radius server group

  AAA authentication login default group sasTac +.

  Accounting sasTac AAA + default group

  RADIUS-server key 7 "09754F021046461S020731".

  RADIUS-server host 10.7.4.22 touch 7 'fewhg '.

  RADIUS-server host 10.207.5.21 touch 7 'fewhg '.

  RADIUS-server host 10.207.5.22 touch 7 'fewhg '.

  RADIUS-server host 10.7.4.23 touch 7 '09754F021046461C020731 '.

  RADIUS-server host 10.7.4.24 touch 7 '09754F021046461C020731 '.

  AAA server Ganymede group + sasTac +.

  Server 10.207.5.21

  Server 10.207.5.22

  AAA server Ganymede group + yokTac +.

  Server 10.7.4.22

  RADIUS AAA radius server group

  On the side of the ACS, I have cisco-av-pair = shell: roles = 'admin network' for the command set.

  Groups in the switch are the remains of the previous configuration; However, I can't find the setting anywhere in the old ACS version 3.3.

  On the post of Jatin Katyal, I found links to explain the implementation of devices, but the links are dead.

  EJ

  I am pleased that you guessed it running. Thank you for posting to the forum and let us know that you fixed it and what you have done to address them. This information could be useful to some other drive in the forum who will work with these switches at some point. It's this kind of information sharing that makes the forum so useful and valuable.

  HTH

  Rick

• Server configuration for APEX 3.1.2 in 10 g XE

  I have APEX3.1.2 installed in 10g XE and I'm not going thorough the OTN tutorial "[Oracle Application Express 3.0 - building a functional Application" | "]". http://www.Oracle.com/technology/OBE/Apex/obe30/apexdev30.htm#L7] in the section "editing of Application objects.
  
  When I click on 'Print the attribute' of a region of the page, it displays "{color: #ff0000} report printing is currently not available, there is no configured print server {color}".
  
  Can you tell me what this means and how to solve it. All I have is APEX3.1.2 installed in 10gXE.
  
  I searched this forum and it seems that I have to install/configure a print server?
  
  
  Thank you!
  
  Kevin

  Kevin,

  See the following topics:
  http://www.Oracle.com/technology/products/database/application_express/HTML/configure_printing.html

  Note step 5.2.

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen

• Dataguard active with EBS 11i

  We exposed customer for Active data guard with EBS 11i, is this certificate with EBS 11i...?
  
  
  Please let me know some more information.

  Active data guard with EBS 11i, is certified with EBS 11i...?

  Yes, its certified with 11i applications.

  Check out the blog of chan steven for more information regarding:

  http://blogs.Oracle.com/stevenChan/2008/10/comparing_oracle_data_guard_vs_active_data_guard_f.html
  http://blogs.Oracle.com/stevenChan/2010/03/oracle_data_guard_11g_ebs.html

  Business Continuity for Oracle E-Business version 11i with Oracle 11g physical Standby Database - Single Instance and Oracle RAC [ID 1068913.1]

  Published by: Amigo on December 28, 2010 07:31

• Cisco Catalyst 2960-S switch configured for 802. 1 x sends a query to access the Radius Server Radius

  Setup

  Cisco Catalyst 2960-S running 15.0.2 - SE8

  Under Centos freeRadius 6.4 RADIUS server

  Client (supplicant) running Windows 7

  When Windows client is connected to the port (port 12 in my setup) with authentication of 802. 1 x active switch, show of Wireshark that catalyst sends ask EAP and the client responds with EAP response. But it made not the request to the Radius server. The RADIUS test utility 'aaa RADIUS testuser password new-code test group' works.
  Here is my config running. Any advice would be greatly appreciated.
  #show running mySwitch-
  mySwitch #show running-config
  Building configuration...

  Current configuration: 2094 bytes
  !
  version 12.2
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname myswitch
  !
  boot-start-marker
  boot-end-marker
  !
  activate the password secret 5 $1$ Z1z6$ kqvVYRQdVRZ0h8aDTV5DR0 enable password!
  !
  !
  AAA new-model
  !
  !
  AAA dot1x group group radius aaa accounting dot1x default start-stop radius authentication group!
  !
  !
  AAA - the id of the joint session
  1 supply ws-c2960s-24ts-l switch
  !
  !
  !
  !
  !
  control-dot1x system-auth
  pvst spanning-tree mode
  spanning tree extend id-system
  !
  !
  !
  !
  internal allocation policy of VLAN no ascendant interface FastEthernet0 no stop ip address!
  GigabitEthernet1/0/1 interface
  !
  interface GigabitEthernet1/0/2
  !
  interface GigabitEthernet1/0/3
  !
  interface GigabitEthernet1/0/4
  !
  interface GigabitEthernet1/0/5
  !
  interface GigabitEthernet1/0/6
  !
  interface GigabitEthernet1/0/7
  !
  interface GigabitEthernet1/0/8
  !
  interface GigabitEthernet1/0/9
  !
  interface GigabitEthernet1/0/10
  !
  interface GigabitEthernet1/0/11
  !
  interface GigabitEthernet1/0/12
  switchport mode access
  Auto control of the port of authentication
  dot1x EAP authenticator
  !
  interface GigabitEthernet1/0/13
  !
  interface GigabitEthernet1/0/14
  !
  interface GigabitEthernet1/0/15
  !
  interface GigabitEthernet1/0/16
  !
  interface GigabitEthernet1/0/17
  !
  interface GigabitEthernet1/0/18
  !
  interface GigabitEthernet1/0/19
  !
  interface GigabitEthernet1/0/20
  !
  interface GigabitEthernet1/0/21
  !
  interface GigabitEthernet1/0/22
  !
  interface GigabitEthernet1/0/23
  !
  interface GigabitEthernet1/0/24
  !
  interface GigabitEthernet1/0/25
  !
  interface GigabitEthernet1/0/26
  !
  interface GigabitEthernet1/0/27
  !
  interface GigabitEthernet1/0/28
  !
  interface Vlan1
  IP 10.1.2.12 255.255.255.0
  !
  IP http server
  IP http secure server
  activate the IP sla response alerts
  recording of debug trap
  10.1.2.1 host connection tcp port 514 RADIUS-server host 10.1.2.1 transport auth-port 1812 acct-port 1646 timeout 3 retransmit testing123 key 3.
  Line con 0
  line vty 0 4
  password password
  line vty 5 15
  password password
  !
  end

  interface GigabitEthernet1/0/16
  !
  interface GigabitEthernet1/0/17
  !
  interface GigabitEthernet1/0/18
  !
  interface GigabitEthernet1/0/19
  !
  interface GigabitEthernet1/0/20

  Have you run wireshark on the server because the request to switch? If so you make sure that there is a response from the server? For Windows network POLICY Server (I've never tried Centos), you must ensure that the request is related to a policy which then authenticates, or denies access. Usually, it is a matter of such attributes and the seller.

  Regarding the configuration, it seems a bit out of the AAA. Try to remove the:

  line "aaa dot1x group service radius authentication" and this by using instead:

  "aaa dot1x default radius authentication group". After the dot1x word you are supposed to provide a list of the authentication or the default Word if you do not want to use a list.

• LAPN300 - the best configuration for 3 access points, while using the same SSID

  Hi all

  What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?

  I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.

  What do you think? What is the best way or do, or could suggest you something else?

  As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network?  Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature?  Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?

  I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.

  Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.

  Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Try to connect to the network, get a msg "the server is not configured for transactions.

  I have a desktop running Vista Professional (SP2) and a laptop running XP Professional (SP3). They are connected by a WiFi network, the Desktp acting as a server. Everything worked well until the Office had a problem and had to have re-installed Windows. Now, although the Office can find the laptop, the laptop can not find the office or its working group. I get a message " is not accessible. You might not have permission to use this network resource. Contact the server administrator to find out if you have access permissions. The server is not configured for transactions. »

  • But once, for about five minutes, it worked - and then stopped again. For no apparent reason.
  • If I connect with an Ethernet cable and no WiFi machines, the last sentence of this message changes to "the list of servers of this working group is currently unavailable."
  • When you run the Configuration Wizard from the network on the laptop, he told me that I have to run the Wizard "on each of the computers on your network. To run the wizard on computers running XP, you can use the Windows XP CD or a network setup disk". I was not able to do so - the XP disc I have does not behave as indicated by the wizard and the wizard does not recognize my CD - RW drive to create a network setup disk.

  Can anyone help?

  Well, who has not responded to my problem, but it was eventually fixed by a support guy with the company who sold me the desktop PC. As I understand it, it was a problem of file sharing. Seems he had to undo sharing all my records on the desktop, then re - share once again, since when I did not have this particular problem. But it's obviously not ideal (in MS eyes at least) to the network of computers with different operating systems.

• Solution for Bluetooth PAN server configuration

  Task:
  -Internet on Bluetooth PAN profile
  -Connection for laptop (Toshiba Satellite A300 1 2 (WinXP SP2) with Sony Ericsson K810i with BT PAN)
  -Computer as a server of PAN (!). Lance PAN Mobile phone connection-> computer.
  You can use internet to mobile phone to laptop.

  But it's bug in Toshiba PAN-server - right click doesn't work in pan-Server tray :( (Local Russian (?))

  * Configuration server PAN *.
  1. options:
  set of 2 boxes in the Bluetooth dialog options (service of pan, pan DHCP service), the [ok] button
  2. Press win - r, type: cmd
  [ok]
  Enter (case sensitivity "") ":"
  CD "c:\Program Files Toshiba Stack\"
  TosBtPSS.exe /END
  TosBtPSS.exe /NAP

  If it is absent pan server in the status bar - check your network connection BTPAN (Bluetooth Personal Area Network) enabled in the control panel and try
  TosBtPSS.exe /NAP

  ((3 set the IP address for the network BTPAN connectivity: 192.168.0.1 (I don't know how Toshiba DHCP server works, but it works!)))
  You can use your own DHCP server configured...

  You can make these instructions batch file...

  Sorry, my bad English)

  P.S. to the developer of Bluetooth PAN server: fixed a bug, please)

  Thanks for this interesting article.

• Activate connections encrypted for the database engine (SQL Server Configuration Manager)

  Hi team,

  I have a quick question, on the protocols for properties of SQL. Option:

  SQL Server Configuration Manager > SQL Server Network Configuration > Protocol for SQL_xxx (right click) > properties, we can see two tabs:

  Tab 1: flags

  Tab 2: certificate

  If I put the value of Instance of hide = Yes, 'Force Enctyption', the fact must be set to YES as well?

  Or Enctyption of the Force must be activated in order to hide the instance?

  What is recommend settings?

  I can see there are good article, but would appreciate if a response.

  https://msdn.Microsoft.com/en-us/library/ms191192.aspx

  Thank you

  + Moin

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Configuration for the Exchange Server issue

  I have a question on an Exchange Server, I noticed that one of my Exchange servers has 4 partitions spanning 2 hard drives and a parition of M which is 55GO, but that does not appear in disk management. M partition contains the domain folder, the mailbox databases are on the D: drive. How will I know how much I really voicemails of disk space? And this configuration is supported?

  Chris

  The "M" 'virtual' drive that resides on Exchange (55 additional GB, its representation is not just messages of real exchange located on who will drive you have configured for the mail store).

  Another pattern on this drive "M":

  The default for this reader is the reader of 'm', but if you manually created a "M" drive before installing Exchange will change to another drive available. It is now recommended to 'disable' this disc.

  Run the "Best Practices Analyzer Tool" on the Exchange Server and it will find any question you should change. To turn off virtual drive is one he'll find and indicate what registry entry to change:

  http://www.Microsoft.com/technet/prodtechnol/exchange/downloads/2003/analyzers/default.mspx

• Autonomous AP521 can be configured for authentication WPA/TKIP with no radius server?

  The AP521 can be configured for authentication WPA/TKIP with no radius server?

  the datasheet, wpa with tkip and wpa2 with aes are supported.

  you want to use (no RADIUS) wpa - psk with tkip. WPA2-psk aes and tkip not use.

• How to find the type of Web server is configured for use with ColdFusion

  Hello

  Where can I check to see what kind of server that ColdFusion is configured to run currently? I have an existing CF installation 9.0.1, which I'll be removing and installing CF 9.0.2. During the instalation of the 9.0.2 version I would need to specify the server to use - Server ColdFusion / Apache / IIS etc. My question is, where I see in CF 9.0.1 existing to understand the server that is currently being used.

  Thank you!

  You can use the Web Server Configuration tool. Assuming you are on Windows, the path to start is generally

  Start-online programs-online Adobe-ColdFusion 9 online-online Configuratiol tool for the Web server

  In fact, you can use this tool to add or remove web servers.

• PDF has not been configured for this web server-2008 Server

  Hello
  
  Try to open a report in preview PDF in the workspace and get the error "" PDF has not been configured for this web server ".
  I use a 32-bit server and hyperion 2008 11.1.1.4...
  I already installed Ghostscript 8.51 in my server...
  
  Thank you

  Yes, I got the solutions... .i need to run the HRprinters.exe then I restart EN and pool services

• Server Linux for EBS 11i upgrade

  Hi all
  
  EBS 11i
  RHEL 4.6
  
  
  Our EBS 11i is running on server HP with OS 4.6 RHEL and a single node only. This server was purchased 6 years ago and lately it is show the performance degradation. We want to migrate/upgrade to a model like high-end HP and make a knot of multiples. But the latest HP model doesn't support a minimum version of RHEL 5.
  My question is, is the support for EBS cloning 11i RHEL 4.6 to RHEL 5? How can I migrate EBS 11i with this kind of scenario?
  
  
  Thank you very much
  
  SIS Inday

  Hello

  It is supported on the database layer node, so there should be no problem in the migration of the database.

  Thank you
  Hussein