Rules of affinity that automatically triggers the Storage vMotion

Similar Questions

• How to remove a virtual machine that has lost the storage

  Hello

  I want to remove the drive a virtual machine that has lost its storage. This storage kept OS files and so on. The problem is that because it is lost I can't access most options since they are grey (eg. delete disk). I can't get out of the inventory, but I want to remove it completely. It is impossible to recover the storage that was missing. What is a way to remove it?

  Thanks adavance

  It's because everything else for the virtual machine has been wrapped in storage.

• Turn off the feature that automatically optimizes the web browser, so that I can see perpetually my open tabs.

  Two weeks ago, as Firefox was normal and kick ass as usual. Then I realized that Firefox has changed-when you do things in a tab for a particular Web site you're browsing, Firefox now this thing annoying hella where it hides see your other tabs to work and "optimize" your notice on the Web site. There used as an orange button that says Firefox at the top left that had a drop down menu of commonly used functions, like the Download Manager and bookmarks. It was all super convenient. It was bright, noticeable and all the tabs that I worked with were visible at the same time. Now, what happens is, if you go to the top of a tab for a Web site that you look at, it 'unmaximizes' window and reveals once-hidden tabs, which is WICKED STUPID because it does that change the orientation of the web page so that the link that you were once to reach is now outside the trajectory of your mouse What causes epilepsy inducing madness of the glitter of the page; not to mention that it kills the time to redirect your mouse because of a characteristic that is not even help what it is. Personally, I use a computer to work, not to be entertained, as the majority of porn watching freaks of nature on this thing. It should just be something that you can turn off easily. Sorry to be so angry, but I thought that maybe I could get used to it, and it's frankly just one of the more nauseating functions on any piece of software I've ever met. Thank you!

  Looks like you have the mode full-screen (which was always in Firefox). Press F11 on your keyboard. How to make Firefox and Web sites go full screen

• How can I create a filter that automatically copies the items sent to different folder than the folder "sent"?

  I tried to create the filter that copy automatically sent to other recipients different messages to different folder as "sent". I tried several times with different setting, but it does not work. With messages, it works fine.

  Thank you

  If you want to "reply" to an e-mail, but you want the reply sent to the car appear in the same folder of the message you are responding.
  Tools > account settings > Copies and folders for the e-mail account
  There is a checkbox to select: "responses on the record of the message being replied to.
  then click OK to save the changes.

  If you want all emails sent not a few answers to learned to different folders based on who sent you the email to, then you need to create a filter which, once manually would be emails selected moves in specific folders.
  So let the emails sent automatically stored in the "sent" folder.
  Tools > Message filters
  Click new
  give the name of the matched filter
  Apply filter when: run manually
  Select "adapt to all of the following conditions.
  E-mail address is
  Perform these actions
  Move the message to and select the folder.

  Do not enable.
  When you run this filter,
  Open the message filter.
  enable only the filters you need.
  Run the filters selected on: sent the file to the e-mail account
  Click 'run now '.

  Best to use when you have multiple emails you need to travel.
  Not exactly what you are looking for, but works if organizes loads of emails sent.

• How do you create a calculation that automatically updates the changes?

  Hi all

  I am trying to create a named using subtraction calculation. That's how it is stated:

  KM

  -KG

  Field1 =

  -Field2

  = GM (liquid)

  The tab calculate for zone 1, I wrote in the simplified field notation:

  KM - KG

  And the tab calculate = GM (liquid), I wrote it in simplified field notation:

  Field1 Field2

  And it all works perfectly that I change all the totals in the fields of Field2 or KG or KM .

  If changes in these areas they don't update automatically.

  How can I make them to update automatically?

  Any help would be much appreciated.

  Thank you very much.

  Bridie

  To set the order of computation of field, go first in forms editing mode (Tools > forms > change), then: tasks > other tasks > edit fields > set field calculation order

  Order the fields in a list of everything that makes sense for your form. Be sure to do it again once the form works as you want to ensure that it is always configured correctly.

• Creation of presentation that automatically plays the slides

  Captivate 4 Newbie - I created one with slide PPT presentation and some demos of software. How can I get the slides to advance and play without the viewer having to click on next?

  probably something simple, but it left me speechless!

  Thank you

  Hello

  Look at the first slide that made a break. Specifically, appearance in the timeline panel. Don't you see what we call a click box? If so, double-click it and look at its properties.

  Now, click on the Options tab. You should see an option called Pause project until user clicks. Clear this check box.

  Now, click on the "Apply to all" checkbox in the lower left corner, and then tap Settings. Make sure that you apply to all slides, and then click Close. And then click OK.

  Preview or publish it again and see if things are now that you want.

  See you soon... Rick

  Click here for authorized Adobe Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• Cold VMotion that brought hacer a Storage VMotion

  He tenido than no hear acabo Poltergeist. Me gustaria compartirlo con vosotros para ver TR are something that también os ha happened. Os pongo in situation:

  
  

  • Pretendo par UN of maquinas UN cluster office mover a otro.
  • Cada tiene cluster hosts of different CPU modelo y no posible realize are UN VMotion en caliente.
  • Para avoid afectaciones indeseadas in el servicio programamos una tarea planificada of Windows that runs, mediante PowerCLI y nocturnamente, a "stop Guest" of each VM, the UN movimiento a los del destino cluster hosts uno y posterior United Nations 'Power On' las VM.

  
  

  Ok. After the run of the task, is well mueve (UN Windows) pero other instances as una las back VM (United Nations Red Hat) no to mueve al destino host.

  
  

  Revisando task & events led Red Hat appears a message of error that says:

  
  

  Impossible to migrate from < HOST ORIGEN > to < HOST DESTINO > and resource pool resources < Center >: Insuficient of disk space on the data store '< DATASTORE_1 > '.

  Spend esto, lo primero hago're revisar el PowerCLI script, to see what no haya hecho UN StorageVmotion, pero certainly no asi're. Además Máquina Windows if that ha movido al host destino, following the same script.

  Lo mas extraño are < DATASTORE_1 > el no tiene nada as worm not con the Red Hat machine than intento mover, are only esta esta mind, digamos en el < DATASTORE_4 > y solo tiene a vmdk, RDM sin disco.

  Def en UN mystery.

  ¿Alguien is ha sown con algo asi?

  Bueno. Me respondo a mi mismo.

  After studying all the logs he could worm that is a bug in VMware en the representation del error Québec muestra en the pestana of tasks & events.

  Perhaps PASE in otros casos, pero themselves can produce facilmente TR brought to mover VM apagada mediante una don't PowerCLI scripting a host in el Québec UN No esta zona para ver las del donde esta mind DataStore LUN created the VM.

  Por algun reason, el message no as soon as there is el en el destino host DataStore don't y as soon as the data store other than no tiene nada as worm no tiene suficiente espacio.

  El traspaso is brought hacer between United Nations 4.1 ESX hosts a multitude of Nations United ESXi 5.0.

  Saludos.

• List of rules of affinity?

  I want to find the list of rules of affinity that connects virtual machines in ESX hosts on vROPs. There must be a way on vRealize to locate the people, but I can't find them.
  Is there a way to locate the list of rules/affinity affinity settings?

  Thank you in advance.

  Anti-affinity cluster rules don't get collected by v6.0.2.

• script storage vmotion which move the config files too?

  Hello

  I have a VMWare admin for a long time but I am very new to the PowerCLI and script. I could find, modify and use scripts that do a simple storage vmotion: all disks go to a data store - but also one that can move independently - disk hard drive 1 to the data store X, hard disk 2 to the data store Y. However, I can't figure out how to recover the configuration files as well. I just got the book "VMWare vSphere PowerCLI reference", which confirmed my fears that you can't call these configuration files (and Exchange files, etc.) as a single parameter as you can hard drives. You use the SDK, that I have even fewer know that the CLI of power!

  I keep my BONES (disc 1) files and configuration files in 'BONES' labeled data warehouses, so whenever I move a Hard Disk 1, I want to keep the configuration files, swap files, newspapers etc. with the OS disk file and move them to another "OS" datastore. No matter who else set up like this and already is figuring out how to automate this type of move? I know that I can move the entire VM to a data store, then move the hard drives 2 and above, but it's a waste of time and I have no OS LUN that are too big.

  Thanks in advance for any help you can give!

  Thanks for buying the book, I hope that you may find useful.

  Yes, you are right, there is no single cmdlet that lets you move only the configuration files.

  You can do this with the RelocateVM_Task method in the SDK however.

  Such a script, in its simplest form, will look something like this.

  $vm = Get-VM MyVM
  $configDS =Get-Datastore -Name "MyDS1" $hdDS = Get-Datastore -Name "MyDS2"
  
  $spec = New-Object VMware.Vim.VirtualMachineRelocateSpec $spec.Datastore = $configDS.Extensiondata.MoRef
  Get-HardDisk -VM $vm | %{
      $hdSpec = New-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator    $hdSpec.Datastore = $hdDs.ExtensionData.MoRef
      $hdSpec.diskId = $_.Extensiondata.Key
      $spec.Disk += $hdSpec}
  $vm.ExtensionData.RelocateVM($spec,"defaultPriority")
  

  You specify the destination of the files "config" in the line of $configDS.

  Hard disks will be migrated to the data store that the script gets in $hdDS.

  If you want to only move the configuration files, you specify the same data store to which they are already for hard disks.

  $vm = Get-VM MyVM
  $configDS =Get-Datastore -Name "MyDS3" $hdDS = Get-Datastore -Name "MyDS2"...
  

• How to stop the default printer automatically get the change?

  Original title: default printer

  Is there a way to avoid windows to change the printer by default whenever a new is installed?

  Hello Erwin,

  Thank you for visiting Microsoft Community.

  As described in the question, I understand that your computer automatically the printer by default whenever a new is installed and you want to stop this behavior.

  I certainly would help you stop this behavior of automatic change default printer on your computer.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. This question has recently begun, or since you got this computer? Is this a desktop or a laptop?
  2. This occurs when you move from one network to another?
  3. Do you feel geolocation enabled on your computer?

  There is a feature in some version of Windows 7 computers (Windows 7 Professional, full and business) that automatically changes the default printer on laptop computers (or mobile devices) what location-based printing is enabled.

  If this is the case, you can disable this feature, you can follow the steps described in the article below to do so.

  Automatically switch default printers between home, work, or school

  http://Windows.Microsoft.com/en-us/Windows7/automatically-switch-default-printers-between-home-work-or-school

  Hope this information is useful. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• [REQUEST] Automatically display the number with the format mask

  Hi Expert,

  I use Jdeveloper 11.1.1.6.0.

  I have a problem to display the input text that automatically uses the format mask user input, as for example the entered user 10000 then the field will automatically display of 10,000

  Is this possible to do?

  
  

  I already find but I just had to format mask that the user must input 10 000 not automatically display in format.

  
  

  Please your advice, really appreciate your help.

  
  

  Thank you

  I already find but I just had to format mask that the user must input 10 000 not automatically display in format.

  Can you describe your use case a little more?

  The format is applied only when the focus is moved out of the field.

  You want to display the groups directly separator when the user inserts the value in the field?

  In this case, you will need to use javascript, and format the entry after each character. This technique is described in the blog of Frank https://blogs.oracle.com/jdevotnharvest/entry/get_social_security_numbers_right

  Timo

• Change of name of the files in Directory/VM after Storage vMotion

  I had a few vMotions storage for virtual machines that left the directory in the source data store (which I didn't). Then I had to move them back to the original data store and the directory and files have been renamed to VM_1... What is the safest way to get these files renamed to its original name? One of the virtual machines in a domain controller too.

  Thank you

  Scott

  You can sVmotion once again, and who must fix.  Assuming that the VMS in vCenter has the correct name, just make the Storage vMotion for a new DS and that should solve.

• Script to automatically replace the specific layers?

  Hello. I work for a small company and we frequently get client files I need to edit. Because of the way thay are formatted the layers always come with the same name/structure, but they still have a layer we need to replace. Go to a shared drive and manually place our desired element (a .pdf file if it is of importance) in the subset to continue with the file layer. Thus, for example, there will be a layer in the default file named layer 1, and this layer is Group 1 > Group > mask of clipping and Image.

  I know ideally we should simply fix the script that formats the layers, but for now is not possible. So what I would like to be able to do (assuming that it is still possible), is to have a script that we can run that automatically replaces the 'Image' file in these layers of subset, I spoke with a file to a location on a local computer (for example replace the 1 layer > Group 1 > Group > image.jpg with C:/example/example.pdf).

  I searched online and could not find anything, so I thought that I have turned to the community for help. Entries, suggestions or creative solutions would be greatly appreciated! And as always, thanks, everyone on these forums is usually very beautiful and impressive, so it's always nice to come here to help.

  Glad to see that you have accepted the challenge.

  Well, this should help you get started. Keep in mind, it is written in VB.NET then you will need to translate it is that you want in Javascript. At least you will have a model to begin with. This is just a quick hack for you to start with - you may need to change the layer you want the new image appears on, if it's important. In addition, it is assumed that you started with a plot point (image.jpg) and whether you want the new image to be incorporated. You will see the code tweak as you wish.

  Var app As Illustrator.Application = CreateObject ("Illustrator.Application")

  Dim aDoc as long as I. Document = app. ActiveDocument

  For each item in aDoc.RasterItems

  If the element. Name = "image.jpg" Then

  order of the day. Selected = True

  Dim newPlacedItem As AI. PlacedItem = aDoc.PlacedItems.Add

  newPlacedItem.File = "YourNewFilePathHere.pdf".

  newPlacedItem.Embed)

  order of the day. Delete()

  End If

  Next

  I hope this helps.

  -TT

• Can not put on the virtual computer after Storage VMotion

  I use the snap for the customer VI do some storage vmotion, where I can best use our space on our tables. I have a particular virtual machine that I transferred autour storage that has a total of 3 VMDK, all on separate LUNS. As soon as I moved them all in the right place, where I wanted them, I can't turn on the virtual machine because it says there is no space available on the device. I am trying to boot the machine with 4 GB of memory, the boot LUN more than 400 GB free on it. The other two LUNS have 225 MB, and 192 MB of free space. I can only start the machine if I change the memory of 192 MB or less. I know that problems with the file exchange and memory overhead, but this virtual machine has always run with these two LUNS with very little space. I can only assume it is somehow related to the storage vmotion. The pagefile is set to store the virtual machine and I'm still having the problem. Need help.

  Storage vmotion the VMX file of the LUN with more space (easier) or add manually a config parameter (settings, Options, general, settings) sched.swap.dir = / vmfs/volumes/DS/Machine

  (where DS and Machine related to your environment).

• Make the iframe automatically adjust the height according to the content without using the scroll bar?

  Hello

  I develop the site (www.meninasreais.com.br) and have a doubt. I created the basic html - menu, header - in Adobe Muse. I'm trying to insert an iframe that automatically adjust the height according to the content of the blog.

  I tried with different codes, the framework is installed on the same domain as the site and none of them worked. What can I do it wrong? Thank you.

  The code that was inserted below:

  < script language='JavaScript'>

  <!--

  Function autoResize (id) {}

  var newheight;

  var NewWidth;

  if (document.getElementById) {}

  newHeight = document.getElementById (id). contentWindow.document. body.scrollHeight;

  NewWidth = document.getElementById (id). contentWindow.document. body.scrollWidth;

  }

  document.getElementById (id) .height = (newheight) + 'px';

  document.getElementById (id) .width = (newwidth) + 'px';

  }

  ->

  < /script >

  < IFRAME SRC='www.meninasreais.com.br' width='600px' height='200px' id='iframe1' marginheight='0' frameborder='0'onLoad="autoResize ("iframe1");" > < / iframe >

  Hi, I successfully did this for my blogging engine.

  I use jquery.autoheight.js

  In the property of my page:

  In my html box:

  This work in Adobe muse. My iframe it set itself with the content of my blog.

  Example: http://www.solutionsip.ca/blog.html