Run an older application on 10 Simulator

Similar Questions

• I'm a gamer. I use xp service Pack2 with windows 7 in order to run an older application without interruption to windows 7?

  Adviser advised compatibility xp SP2 download

  Hi Careysav,

  Welcome to the Microsoft Answers site!

  You can try to play the game in compatibility mode to avoid the problem.

  Here are the steps to run in compatibility mode, it applies to Windows Vista, but it's always good for Windows 7.

  To run the game in compatibility mode:

  1. open the troubleshooting program compatibility Troubleshooter by clicking the Start button, then

  2. click on Control Panel. In the search box, type Troubleshooting, then

  3. click on Troubleshooting.

  4. in the framework of programs, click run programs made for previous versions of Windows.

  5. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  For more details, visit the below given link:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Alternatively, you can try to use Windows XP Mode. Here, you can run programs that were designed for Windows XP on computers running Windows 7 Professional, enterprise or Ultimate editions that also meet certain hardware requirements.

  For more details, you can check here it is given a link and download Windows XP mode.

  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to deploy my application on the Simulator more

  Since there are 4 days, I can't deploy and run my application on the Simulator more, I get this message all the time:

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 482774
  Info: Installing eir.bb10.CorporateContacts.testDev_ateContacts1e5ecb89...
  Info: Treatment 482774 bytes

  What could be the problem? I later use NDK, reinstalled all, using 3 different simulators, including the most recent, but without success.

  I'd appreciate any help. It is very annoying, because I can't do any work and ship expected app updates, I face the environment of dev for 4 days! I have worked on many platforms and with many different tools, but I've never experienced anything like this.

  Thanks for the reply!

  I managed to get things running in a similar way. I uninstalled everything, including the NDK and start over. I returned to VMWare Player v.4. I work mainly with outdated Simulator, we run the fastest for me, although later runs now too.

  Yet EACH deployment on a Simulator takes several attempts, I don't remember when was the last time that the deployed application and runs correctly on the first attempt. I also change the download settings, switching between 'install bar' and 'clean install', these two works more often for me. Another thing to try in the meantime is to go for debugging directly, if the race does not...

  It is a terrible experience and it's very laborious, as I end up losing most of my time trying to run my application on the Simulator, instead of productive coding. Sorry BlackBerry, but it's worse that develop for Android, iOS, Windows Phone, Java ME... I develop for these systems and has never had any topic also with any of them.

  One of the reasons for the app started working again maybe do something with the code, because it contained errors, but the construction still successfully passed and they never showed me any error message in the IDE or in the Simulator. Anyway, I'll never know if my code had something to do with the cause of the problem, because the 'hack' held an older VM etc. But I write this so that people know that it can theoretically hinder deployment too.

• Older applications launch Services database

  I have a problem with older applications, which are not yet on my machine, appear when I right-click on a file and choose "open with...". ». From what I can tell that this list is what we call the launch Services database. I can clean with Clean My Mac 3 to rebuild the database, but in a day or so old applications (which as I have said, are not yet installed more) appear again.

  It became a real problem about a week ago when Adobe Lightroom couldn't run Photoshop - I kept getting a weird error message. I posted the problem on several juries of Photoshop which resulted in my uninstall and reinstall several times, until I hit on the idea of rebuild launch services database. That fixed it for a while, but the old version of Photoshop crept into the launch services database and I could no longer run Photoshop of in Lightroom. I did Clean My Mac 3 reconstruction and it has cleared up, but I really want to solve this problem once and for all.

  Don't use software such as "clean my mac"...

  Only uninstall completely.

  The launch services database can be erased with a small Terminal command, you don't need additional software to do this - and beware of any program that wants to 'clean up' or 'protect' your mac, as it is likely to more damage than any good. Some are outright scams.

  If you need a reputable software to adjust the settings not available and to avoid dealing with the Terminal, try Onyx. Free, was there for many years, quickly updated and from a reputable developer.

  Or triple - click the following line (it's a very long single line) to select it, copy and paste into a Terminal window, press ENTER to execute the command.

  /System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.framework/Support/lsregister -kill -r -domain local -domain system -domain user

• system is not able to run the Apple Application Support service

  I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?

  Can you post the error message you get when you try to install or launch iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Installation of Cisco Application Centric Infrastructure Simulator

  Morning,

  I want to know if it is possible to install Cisco Application Centric Infrastructure Simulator on ESXI or VMWare WorkStation. If so, what is requirements.

  Thank you.

  Morning,

  I regret to inform you, there is no VM for ACI Simulator. There is a hardware Simulator that can be purchased, it is a series of UCS - C that runs a modified version of IPEC and virtualizes the cluster three APIC and fabric Nexus 9000 sheets/thorns switches. Its a great place to get acquainted with the GUI to configure policies, interact with vCenter and L2/L3 network but is limited to the configuration of the policy, there is no traffic data plan.

  Here is the Simulator "APIC-SIM-S =" product ID

  Hope that answers your question, thank you for the use of forms of support of Cisco: ACI have a good day.

• How to run the HTTPDemo application?

  I use JDE 4.7 and tries to run the HTTPDemo application in the samples.jdw, using the default Simulator 9530.  But I can't seem to access the https://www.blackberry.com/go/mobile/samplehttps.shtml.  What should I do to make this work?  I have to Setup Wap Options in the application?  appreciated your help

  PJ

  Heya,

  You must have the MDS Simulator running.

  For more information, go to the help in the Blackberry Simulator. Contains information on this right to the = high)

  ~ James

• Cannot find my application on the Simulator

  Hello

  use eclipse ide for the development of the BB application.when I run my application on the Simulator, I can't find my application in the downloads (simulators) .plz help me

  Krishna,

  Have you created a debug or run your application configuration?

  Follow a previous post of mine:

  http://supportforums.BlackBerry.com/T5/Java-development/how-can-I-add-applications-to-my-BlackBerry-...

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• "Your system is running out of Application memory"

  Hello

  Since last week I have been having a problem where my computer screen appears with a reading of the question 'your system has sold out of the memory of the application.' This happens around every 20-30 minutes to use my computer, where the issue is resolved by restarting my computer. However, this message appears when I have 1 or 2 applications open (including the permanent Finder application). At my computer without a doubt a lot of memory left and I installed only 5 additional applications: League of Legends, Microsoft Excel, Powerpoint, Word and Outlook. I used OS X El Capitan for the first half of the week and macOS Sierra for the second half, but the upgrade did not solve my problem.

  I run:

  MacBook Air (13 inch, mid 2013)

  1.3 GHz Intel Core i5 processor

  DDR3 4 GB 1600 MHz memory

  Start drive Macintosh HD

  Graphics Intel HD Graphics 5000 1536 MB

  Your system is running out of RAM, not disk space. 4 GB is the absolute minimum of RAM. Try to remove all unnecessary startup items (Preferences > users and groups > you > login items) with the key less (not simply uncheck the boxes - which hide just the app but it still works).

  You can also run activity monitor (Applications > utilities) to see what is using the memory.

• What are the original applications for the iPhone 6 s. I had to sync to my iPhone 3g to my new 6s in order to maintain my contacts. can someone please send screenshots of an iPhone running 6s with applications shown. I need pages outside the home page.

  What are the original applications for the iPhone 6 s. I had to sync to my iPhone 3g to my new 6s in order to maintain my contacts. Unfortunately, I lost a lot of these new applications. can someone please send screenshots of an iPhone running 6s with applications shown. I need pages other than the home page. Thank you!

  'Stock' apps are part of the installation of iOS and cannot be removed, so there is nothing to verify or prove.

  When you move to a new phone, just need restoring your old backup phone and compatible applications will be synchronized to the new.

• Apple TV (4th gen) cannot run third-party applications

  In the last days, I knew this major problem where I can't run third party applications. When I go to all third party apps, the screen goes grey (background parallax effect) and I press the Menu button to see the home screen again.

  I saw these 2 times now, and the apps would work very well for some time between the two.

  Built-in such as movies and App Store apps seem to go very well.

  Network seems fine as I could watch movie trailers.

  I tried to go into the settings of-> system-> Restart, nothing helped.

  If someone knows the cause of this or has no work around, let me know!

  Make sure that there are no applications running in the background by force to leave everything.  Since the double home screen, tap the button with the silhouette of the TV and slide up all the apps that appear outside the home screen.

  I have apps that will work just fine one day and then throw in a screen empty the next.  Forcing everything to quit running in background solves the problem.  You'll be amazed how many programs accumulate since you never really left a program when you return to the home screen.

  I think that the system software and applications are pretty buggy at this stage in order to make the applications completely leave minimizes problems.

• How to run no Ui application

  Hi all,

  I'm working on request blackaberry.

  I have a problem with no ui application performance.

  I have to write ui non-application, which is not a show in the blackberry desktop (I mean the icon of the application, which is display on the screen of the device).

  and I have to run no ui application to interval given automatically, or whenver the contacts are add, edit and delete.

  So how to run my application no user interface which is not present in the screen of the blackberry device. ?

  Thanks in advance for any help and better understand my English.

  If you select the "system Module" Application icon will not appear.

• make a background application to display in the running list of applications

  Hello

  I wrote a program that extends from 'Application', the application has no user interface.

  How can I make it appear in the running list of applications?

  Why do you want to show him in the Task Switcher.

  In my view, it is possible to have a UiApplication, make appear and do NOT have a user interface, simply substitute activate and call immediately

  UiApplication.getUiApplication () .requestbackground ();

• BlackBerry Smartphones test web application through BlackBerry Simulator.

  Hello

  I have to test my web application on a blackberry Simulator. My first question is: if it is possible to test any web application using the Simulator or I can test only the rich applcations of BlackBerry?

  I do the following:

  1. I downloaded Black Berry Email and MDS services Simulator 4.1.2 and BlackBerry_Simulators_4.7.0.78_9500 - Vodafone.exe.

  2A started the MDS Simulator first, then the BB Simulator.

  But I am not able to connect to internet, BB Simulator. Am I missing a config in the MDS Simulator.

  Help, please. This is urgent. TIA.

  Hello

  Open the rimpublic.property file. The rimpublic.property file is located in the following locations: \Program Files\Research In Motion\BlackBerry Email and Simulators\MDS\config of MDS
  

  Then add these commands in the section [MANAGER HTTP], update the following:

  application.handler.http.proxyEnabled = true

  application.handler.http.proxyHost = hostname

  application.handler.http.proxyPort = hostport
  application.handler.http.proxyUser = username

  application.handler.http.proxyPass = password

  application.handler.http.proxyAutoConfig = true

  application.handler.http.proxyAutoConfigURL = http://URL_to_Your_Config_File

  application.handler.http.proxyAutoConfig.ScriptCacheTime = 0

  Save these changes and to make with your steps... that will succeed to open a web application on your Simulator... more can know which web application (i.e. URL) that you want to test... I had the same problem, but somehow managed to open sites to Simulator after adding these commands. But my main concern is to open a URL in sector public siebel that is installed on a server in 9530 Simulator device. Can you/only you know which deals with the implementation of CRM siebel on simulators could you please suggest me doing this task.

  Thanks in advance

  Hochart

  India