Run an operation binding from an implementation of the View object

Similar Questions

• Bind Variables on the view objects child definition

  JDeveloper 12 c

  I have an interesting question.  I have a view (AisWebModulePrivsVO) object that uses a bindvariable hardcoded in the view object.

  SELECT * FROM SYS. DBA_ROLE_PRIVS where DEALER =: bvUserName

  If I put this in the request module I can programmatically set the variable binding (view object contains the getter/setter for the binding variable).

  AisWebModulePrivsVOImpl voTest = am.getAisWebModulePrivsVI ();

  voTest.setbvUserName ("ARAWLS");

  voTest.executeQuery ();

  System.out.println ("test reports:" + voTest.getRowCount ());

  and get the correct number of records based on return on the user and database roles. If it works.

  What does NOT work, it is when this display object is a recording of 'the child' to another display object (as specified by a link between the two and by setting the object from a point of view as one child of the other in the module of the application).

  AppModule looks like this:

  CgRefCodesVO

  AisWebModulePrivsVO

  In this case, I have a view called cgRefCodeVO parent object.  There is a link between this and the AisWebModulePrivsVO. The relationship works.

  AISMenuAppModuleImpl m = ADFUtils.getApplicationModuleForDataControl (appMod) (AISMenuAppModuleImpl);

  CgRefCodesVOImpl cgRefVO = am.getCgRefCodes1 ();

  AisWebModulePrivsVOImpl modsVO = am.getAisWebModulePrivs1 ();

  modsVO.setbvDBUserName ("ARAWLS");  This doesn't seem to work here...

  cgRefVO.executeQuery ();

  All lines rs = cgRefVO.getRowSet ();

  RS. Reset();

  While (rs.hasNext ()) {}

  CgRefCodesVORowImpl CgRefRow = rs.next ((CgRefCodesVORowImpl));

  System.out.println ("RvLowValue:" + CgRefRow.getAttribute ("RvLowValue"));

  RowIterator aisModulesRowIter = CgRefRow.getAisWebModulePrivs ();

  System.out.println ("number of children:" + aisModulesRowIter.getRowCount ());

  }

  The code compiles and runs.  She translates: "County of the child: 0" for each row returned by the

  I also tried:

  VM VariableValueManager = modsVO.ensureVariableManager ();

  vm.setVariableValue ("bvDBUserName", "ARAWLS");

  And:

  modsVO.setNamedWhereClauseParam ("bvDBUserName", "ARAWLS");

  and (of https://community.oracle.com/message/2746551#2746551 ( )

  @Override

  protected void executeQueryForCollection (Object, object, Object [] object2, int i) {}

  I coded everything hard to see if it would work.

  setNamedWhereClauseParam ("bvDBUserName", "ARAWLS");

  super.executeQueryForCollection (object, object2, i);

  }

  and from there, I changed around the order to execute the objects in view.    https://community.oracle.com/message/10632314#10632314

  How can I set the variable binding in the object view child?

  Thank you

  Stuart

  It is an interesting example how ADF works up to a certain point... then you need to start to make cuts to modify its behavior as you wish.

  I decided that it was just easier to delete 'the child' parent (in the app module) and create a view of criteria on this subject for what would basically query the records to get the same results, like a child.

  Perhaps not as elegant, but so much easier.

  Thanks for your help.

  Stuart

• Houston-25036: an invalid object operation was drawn to the View object type.

  Hi all
  
  I use version jdev 11.1.2.2
  
  I have an application module impl in which I have a method to call a pl/sql that calls an external API.

    public String create(String productId, String component)
  {
      String createMessage=null;
      DBTransaction dbtransaction = (DBTransaction)getTransaction();
      StringBuffer str = new StringBuffer();
         str.append(" BEGIN ");
      str.append(" api.database@test ( ");
      str.append(" p_number                    => :1,   ");
      str.append(" p_product_id               => :2,   ");
      str.append(" p_component                => :3   ");
      str.append("    ); ");
      str.append(" END; ");
  
      CallableStatement callablestatement = dbtransaction.createCallableStatement(str.toString(), 1);
  
      try {
        callablestatement.registerOutParameter(1, Types.INTEGER);
        callablestatement.setInt(2, Integer.parseInt(productId));
        callablestatement.setString(3, component);
        callablestatement.executeUpdate();
        dbtransaction.commit();
        createMessage = callablestatement.getObject(1).toString();
        if (callablestatement != null) {
          callablestatement.close();
        }
        if (dbtransaction != null) {
          dbtransaction.closeTransaction();// closing connection
        }
  } catch (Exception e) {
        e.printStackTrace();
      }
  
      return createMessage;
  }

  I returns a value of this class of impl. I call this form of method a bean customer interface through. Then, I want to display another page passing the return as a variable binding value to another object to display grace to perform with the workflow setting.

    public void callCreate(ActionEvent actionEvent){
      BindingContext bctx = BindingContext.getCurrent();
      DCBindingContainer bindings = (DCBindingContainer)bctx.getCurrentBindingsEntry();
      DCDataControl dataControl = bindings.findDataControl("ReportAMDataControl");
      ReportAM ReportAM = (ReportAM)dataControl.getApplicationModule();
      createMessage =
          ReportAM.createBug(product, component);
        FacesContext context = FacesContext.getCurrentInstance();
        context.getApplication().getNavigationHandler().handleNavigation(context, null, "goExecute");//navigate to next page
  }

  Everything is going very well when I'm not closing the db connection in the impl.
  
  but when I close the db connection is showing the following error.
  
  Houston-25036: an invalid object operation was drawn to the View object type.

  <MethodExpressionActionListener> <processAction> Received 'oracle.jbo.InvalidObjAccessException' when invoking action listener '#{invokeImplMethodBean.callCreate}' for component 'cb1'
  <MethodExpressionActionListener> <processAction> oracle.jbo.InvalidObjAccessException: JBO-25036: An invalid object operation was invoked on type View Object with name RVO
       at oracle.jbo.server.QueryCollection.getPCollManager(QueryCollection.java:505)
       at oracle.jbo.server.QueryCollection.initPCollRows(QueryCollection.java:337)
       at oracle.jbo.server.QueryCollection.initQC(QueryCollection.java:367)
       at oracle.jbo.server.QueryCollection.<init>(QueryCollection.java:271)
       at oracle.jbo.server.ViewRowSetImpl.initQueryCollection(ViewRowSetImpl.java:876)
       at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1140)
       at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:1413)
       at oracle.jbo.server.ViewRowSetImpl.executeQueryForMode(ViewRowSetImpl.java:1319)
       at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:1304)
       at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:7211)
       at view.InvokeImplMethod.call(InvokeImplMethod.java:206)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
       at java.lang.reflect.Method.invoke(Method.java:597)
       at com.sun.el.parser.AstValue.invoke(Unknown Source)
       at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
       at com.sun.faces.facelets.el.TagMethodExpression.invoke(TagMethodExpression.java:105)
       at javax.faces.event.MethodExpressionActionListener.processAction(MethodExpressionActionListener.java:148)
       at javax.faces.event.ActionEvent.processListener(ActionEvent.java:88)
       at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcast(UIXComponentBase.java:824)
       at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:179)
       at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:159)
       at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:130)
       at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:461)
       at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:134)
       at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:112)
       at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:130)
       at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:461)
       at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:134)
       at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:106)
       at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1134)
       at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:358)
       at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207)
       at javax.faces.webapp.FacesServlet.service(FacesServlet.java:508)
       at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
       at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
       at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
       at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
       at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
       at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
       at java.security.AccessController.doPrivileged(Native Method)
       at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
       at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
       at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
       at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
       at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
       at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
       at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
       at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
       at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
       at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
       at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
       at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
       at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  No idea why this is happening?
  
  Can someone help me with this problem? :(
  
  Thank you
  Vignesh

  like I said with ADF BC, we never explicitly close the DB connection (framework takes care for this).

• How to set the attribute of the View object at run time using the setter method

  I'm working on Oralce ADF Insider video of Frank. In fact in this video Frank EmployeeVO departmentId value using a setter method setdepartmentIdVar(). In this video do not see the name of the entire field. I tried with different opportunities and get the following errors.

  If I try with departmentId get this error message: there is no field with the name departmentId in EmployeeView1

  If I try with department_id get this error message: there is no field with the name department_id in EmployeeView1

  If I try with department_id get this error: there is no field with the name department_id in EmployeeView1

  

  This method, it is used in a BTF. Can you please take a look at this video and let me know what should be the name of the field.

  Thanks in advance.

  Simply open EmployeeView and see the correct attributeName, normally it's DepartmentId

  What is see in the picture the viewObject attribute is omitted, it is bind variable name, m I right?

  To check name in viewCriteria viewObject section

  
  

  Ashish
  

• What is the need for accessors from view at the level of the entities, as well as the view object level?

  Hi all

  What is the need for accessors of the entity and object level view-level view

  I use 11.1.1.7 jdev

  Thank you

  Delphine

  Timo, I think you might have taken the tack wrong here.  As you know EOs can use VO * accessors * (not associations) like your for things like validation entity or object view research

  CM.

• When will be purged from the client of the View object properties.

  Hello!
  
  When will customer properties (settings-> general-> Custom properties VO) to purge the View object?
  
  Description of the custom properties is these properties are name / value framework for accessing execution.
  
  My case is: dynamically set some channels in the VO properties and use it.
  It works fine most of the time. But sometimes, these properties are missing. know when to leave intact page for a little while (about 20 minutes before the session expires).
  
  So my question is: what will miss these properties?
  
  I suppose it could be linked to the Application system of the State as your are hanging in AMS. And I'm might passivate. But in [this | http://docs.oracle.com/cd/E14571_01/web.1111/b31974/bcstatemgmt.htm] document shows any view to the level of custom data objects will be saved during passivation. So it is not the point.
  
  Can someone help?
  Thank you! :-)

  Hello

  Custom properties are not intended to be used as a data store, but to provide the setting for the items (a feature that is intended for highly reusable VO report). Sounds the informaton you set properties is lost during passivation of the view object.

  Frank

• problem with bind variables in the SQL query view object

  Hi all

  I use JDev 11.1.2.4.0.

  I have a problem with bind variables in the SQL query view object.

  This is my original SQL

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE t.nctuser_id = '20022' 
        AND to_char(t.insertdate,'YYYYMMDD') in ('20130930','20130929')
  group by t.legertype_id
  

  In my view .xml object query tab, I am writing this

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE   t.nctuser_id = '20022'
      AND to_char(t.insertdate,'YYYYMMDD') in :dddd
  group by t.legertype_id
  

  Davis here is a variable of Type liaison: String, updatable and necessary.

  I try to deal with Davis as ('20130930 ', ' 20130929') hoping the view object, run as my original SQL.

  But failed. The view object retrieves 0 line after that I run.

  Why?

  Thank you! ('2original SQL0130930', '20130929') ('20130930 ', ' 20130929')

  A variable binding cannot be used as this is why you must use years table. Check decompilation binary ADF: using oracle.jbo.domain.Array with ViewCriteria to see a solution.

  Timo

• Bind variable: always related to the current attribute of the iterator line

  Hi, OTN,.
  Need some help with the variable binding query of the view object.
  
  I have a VO1 with: PARAM in a subquery in the WHERE clause.
  This: PARAM must always be equal to the current attribute of the iterator of VO2 line.
  
  VO1 and VO2 are not related, but their of1 and EO2 entities has an association.
  
  VO2 is exposed as an array on my page, so I did it with the table selection listener.
  He calls makeCurrent parameter named where clause param for VO1 and VO2.
  
  This method works, but the problem is selection listener is called only when a table row is explicitly selected.
  The current row of the iterator can be changed whithout table selection, such as sorting or the parent navigation of VO...
  
  Is there a world better, maybe a declarative method for this problem?
  Thank you.
  
  Example query VO1:

  SELECT ... FROM EO1
  WHERE ID != (SELECT ID FROM ... WHERE attr = :PARAM)

  JDeveloper 11.1.1.3, AD, BC

  I guess you try relationship master / detail (Table-based form)... you must see link
  Refer to this:
  http://download.Oracle.com/docs/CD/E14571_01/Web.1111/b31974/web_masterdetail.htm#ADFFD761
  Chapter 24 - master data display / detail

  Amit

• View object instance read cache - from anywhere in the application?

  Hello. All,
  
  This seems to be a difficult question.
  
  I have a table of user information and have defined the subject entity and object view for him. I have also written a method reduceToOneUser which reduces the instance of the view object for that one line, based on user input.
  
  1. they are made, as in the flowchart on page of struts - config.xml, starting the flow by a loginDataPage, who passes to the dataAction_1.
  
  2 dataAction_1 called the reduceToOneUser, which effectively reduces the view to a single line object instance. dataAction_1 is transferred to the dataAction_2.
  
  3. now dataAction_2 is not just before a next node, but must send to one of SEVERAL nodes according to the values of the attributes in the instance of the view object.
  
  And the challenge is here. I know that the instance of the view object is there, the cache is there, but how to get the values of the attributes of the object instance in the cache of the view view when I'm in the DataAction java object? (I created the class of AuthenticationAction by double clicking on the authenticationDA icon in the page flow diagram.)
  
  
  < pre >
  
  package zb.view;
  to import java.util.Enumeration;
  to import javax.servlet.http.HttpServletRequest;
  Import oracle.adf.controller.struts.actions.DataAction;
  Import oracle.adf.controller.struts.actions.DataActionContext;
  Import zb.model.BillViewImpl;
  Import zb.model.ZBModuleImpl;
  
  SerializableAttribute public class AuthenticationAction extends DataAction
  {
  protected void findForward (DataActionContext actionContext) throws Exception
  {
  I can get the user entry OK:
  HttpServletRequest request = actionContext.getHttpServletRequest ();
  The ID of the string (String) = request.getParameter ("id");
  Chain pin (String) = request.getParameter ("pin");
  System.out.println ("ID:" + id + ", PIN:" + pin);
  
  Here the findForward ("toValidate") works fine and passes it to the page that the
  before toValidate points to. But in the logic of my profession, one of the attributes of the view object
  instance must meet certain conditions before the user is forwarded to this page. So I have
  need to get the attributes. - But how?
  actionContext.setActionForward (actionContext.getActionMapping () .findForward ("toValidate"));
  }
  }
  
  < / pre >
  
  
  I am a newbie. My approach here is appropriate? Is there a better way? It is very appreciated if someone can help out me. Thank you very much!
  
  
  
  
  Newman

  Newman,
  Now you have a configuration problem. I told you that the code comes from an earlier version of struts and may not work in your case.
  The good news is that google is your friend :-)

  This document gives an overview on your version adf data binding.

    protected void findForward(DataActionContext ctx) throws Exception {
      /*
       * "EmpService" is the name of the application module
       */
      EmpService svc = (EmpService)ctx.getBindingContext()
                                       .findDataControl("EmpServiceDataControl")
                                       .getDataProvider();
  
          // use the application module as you like ...
    }
  

  The code above show how to get the application module that is associated with a data control (from the doc above).

  Here are a few links: [link1 | http://forums.oracle.com/forums/thread.jspa?messageID=670290򣩒] and [Link2 | http://forums.oracle.com/forums/thread.jspa?messageID=719824򯯐]

  If you like some more try [this research | http://forums.oracle.com/forums/search.jspa?threadID=&q=%2Bdataaction+%2Bapplication+%2Bmodule&objID=f83&dateRange=all&userID=&numResults=15&rankBy=10001]

  Timo

• Changing the values of abbreviation from the database to the ADF object

  I useADFJDeveloper 11g Release 2

  
  

  I use Entity object called Project referring to the actual database table. This table contains fields that contain values of the abbreviation; for example this table filed called STATUS that describe the current state for the project. this filed will be values such as: 'A' approved for, 'X' for rejected and so on.

  In the interface ( JSPX , or JSF Pages) I just drag / move the View object which refers to the Project Entity object . and the page displays the project files with their status as specified.

  It is:

  Is it possible to change the values of this observation to the real value of somewhere; It's like instead of the values (A, X,...) I want to have (approved, rejected,...)

  You can write in an el in the value of the State field as "#{binding.status.inputValue == 'A'? '} '. {Approved ': "Rejected"}

• How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

  Problem:  After I do a backup one using ghettoVCB on a local VMFS volume, I have a virtual machine that I can start something happened to that running.  However, sometimes I just need a file from the OS level, which means that I would need to start to get them, but then I have an IP address conflict.  I can't imagine a way to have the NICs turned off and still be able to move the file.  If I change the IP addresses, the software that I need to create the file that I need to transfer no longer works because, although there no need of constant connectivity to the seller, it is locked to the public IP address.

  Material:  I have two 4 ESXi hosts to work, each with local VMFS volumes.  They share a private vlan common and a vlan common public.  They each ssh, ftp, wput, wget, and rsync available.  I have a Windows 2003 Server VM which also hosts a NFS and the VI client and other VMWare tools.  It also has private and public interfaces as do virtual machines that would be to make and receive the OS files.

  Question:  How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

  Thank you!

  Yes Mr President, make sure you set the network on this virtual machine to be connected to the 'Internal' vswitch, you set up before turning the power on to the virtual machine.

  -

• PC RUNNING SLOW - UPGRADE RAM FROM 2 GB TO 8GM

  I did something wrong: I: 2011 ACE EMACHINE, AMD Dual Core 64-bit E300 1.3 GHz with a 500 GB hard drive.  The operating system is Win. 7 at home.

  1. when I increase the RAM from 2 GB to 8 GB (7.5 can be used) that means?  I understand that some are for the system.

  2. How will I know which programs are appropriate to use with my RAM memory?

  3. once I did the installation, my computer still work slow why? Do I need more high grade for my PC better?  If Yes, what?

  I thank very you much for your time.

  You asked: when I increase the RAM from 2 GB to 8 GB (usable 7.5) what does that mean?

  I have already replied to this above. Part of memory is used by the system to manage the rest of the memory.

  You said: I don't have that 1 or 2 program open at the same time.

  You could use only 1 or 2 both programs, but in fact, your computer has hundreds of programs running. This is what is listed in the Task Manager process tab.  You can consult this list to identify what type of program is using a lot of your CPU cycles and causing slowness.

• Cannot remove three shared folders from previous installations of the operating system

  I discovered three files named ICS$ ADMIN$ and C$ in the management of the computer that displays three folders. I wonder if you have a solution to this problem or any useful comments, you will have on the problem.

  NOTE: I tried to delete the folder via an elevated command prompt.

  I already deleted the folder three via the command prompt the command delete, but when I rebooted the computer, shared three record were still there.

  You can see these three files here http://i1282.photobucket.com/albums/a523/Dannysbiz/untitled2.png

  It works the same way with $recycle.bin if the folder and the file does not exist it creates it and sets their default no matter if it comes from your old operating system or not his record as a value by default, you could run cmd system permissions and delete them throughout the day and it just regenerate.

  system of the mark as shared because the system of sharing folders and files with you

• Why did he say that you are running an operating system that Photoshop can't

  I just bought Adobe student cloud. When I try to download Photoshop on my mac that he comes back with the error "you are running an operating system that supports Photoshop is no longer", nobody knows what this operating system? Can anyone help?

  Check your version of MAC OS

  First, click on the Apple icon in the upper left corner of your screen. From there, you can click on "about this Mac". You will now see a window in the middle of your screen with information on the Mac you're using.

• That's what I get when I go down load I'm stuck error you are running an operating system supporting Illustrator is no longer. See the system requirements for a complete list of the supported platforms.

  

  That's what I get when I go down, load the program on my computer

  You run an operating system supporting Illustrator is no longer. See the system requirements for a complete list of the supported platforms.

  I'm stuck

  Thank you

  Cindi

  I guess you are trying to download from the Adobe web site.  If you are using WIndows Vista/XP or Mac OS X 10.6.8.

  Install Adobe Application Manager and update and connect.

  It will automatically detect the version of Illustrator that is compatible with your computer and the same list.

  Then you can go ahead and install the same.

  You can download the Adobe application manager using link below:

  Windows:

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Mac:

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg