Run as administrator command prompt using the exec.vi system

Similar Questions

• Call a VI that uses the 'exec.vi system' with the LabVIEW runtime as adapter

  Hello

  My TestStand sequence called a VI that includes a call to 'exec.vi system '. When I try to load it in TestStand and if LabVIEW adapter is set to the runtime, I get an error message «Unable to load Vi...» ». If I change the map to the 'development system', then it works fine.

  Is it possible to use the 'exec.vi system' in a VI that is called by TestStand with LabVIEW run-time?

  Thank you

  Alex

  Hi Alex,

  In case you, you get an error-18002.

  The reason is explained in the following link:

  -18002 errors in TestStand

  http://digital.NI.com/public.nsf/allkb/D82FEAF0B4BA293A862575710053E252?OpenDocument

  Please take a look at # 2. This is your case.

  It will be useful,

  Regrads

• How to run as administrator command prompt? * Respond quickly please *.

  It gives me access denied when I try to copy files when I am logged on as administrator.

  Try mode safe mode with command prompt. Restart the computer and press f8 just before windows starts to load. arrow down to "safe mode with command prompt. If the programs you use are not windows programs, then the drivers for them will not be loaded, but it should open the command prompt to you

  I hope this works

• Unable to run the Windows 7 Administrator command prompt

  Cannot run command prompt as an administrator in Windows 7 that the problem was discovered many years ago. But another administrator account can start. Win + R to run the command, at the command prompt the corresponding response. A command prompt in the Task Manager processes

  Proposed by the moderator to Performance & category system failures

  Hello

  It is possible that your user account is already damaged and this is why you have this problem.

  To resolve this problem, create a new administrator account and migrate your files to the new user account. For more information about how to create a new user account, please refer to the link.

  
  Let us know if you need more assistance.

  
  Kind regards.

• How to raise the exec.vi system administrator on Win7

  Hi guys

  I build an installer to our application and want to inject the driver OR not required for the program interface with our material in Win7... I'll use pnputil.exe to add and install our signed driver... But pnputil will work only if cmd prompt is amounted to administrator (being administrator is not enough by using cmd)... This is easily done in the environment of win7 (ctrl + shift + enter to the search bar after typing cmd) but y at - it a command that works on win7 I could call to enable this rise happen without user interaction? I wanted very much as for create a post installer that calls the installer of NOR raise the program, and then call the function pnputil since the exec.vi system, which leaves the system with the installed driver and a plug ' gaming experience to the user.

  Any good suggestions?

  Best regards

  Jacob Navne

  LV8.6.1 - win7 / XP

  If you use the option "run command line after installing" Installer, I think that it runs the command line with the same rights that the installer had, that rights should be admin high you're looking for.

  It worked for me in the past to win7.

• How to avoid displaying the command prompt when the resumption of hibernation?

  How to proceed: in Control Panel, set the power Option when I press the power button to avoid display the command prompt during the recovery from hibernation, or use a script to close the command prompt at startup.

  Hello

  Thanks for posting your query in Microsoft Community.

  You can try the following steps and check.

  Press Windows key + R, type in msconfig and click OK

  Click on Startup tab, right-click on command prompt and click Deactivate

  Click OK

  Restart the computer and check.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Windows 7, allow a standard user to run a program restricted without using the ADMIN password

  I support a disabled man who often clicks in the wrong places.  A game program has been installed by the administrator.  When he, a standard user tries to run the program, an ADMIN password window appears it didn't.  I tried the "run as Administrator" but still get the password window.  How this program can be set to run without password and have all rights, so the scores and games can be saved?  Thanks to all who can help.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• in the Exec.vi system call stack overflow

  Hello

  I have on dos application which I call you for a specific task through the entrance to the command line for system exec.vi... problem that I get to crash dos application without completing the task... I checked with the release of vi and he says:... stack overflow and then I run it manually by calling the same command line to the command prompt... There along the...

  Any suggestion to improve? Why any task getting EXECUTED in manul call in command prompt is getting crashed when calling via LabVIEW?

  Thank you

  -HS

  Hi Navjodh,

  Finally I removed the exec.vi system and using dot net containing call node... so my problem is solved for now

  Thank you

  -Himanshu

• Error 2 to the Exec.vi system.

  Try to copy a file PRN in 4 k on a USB printer on LPT2.  The command "copy/b ggg.prn LPT2" worked very well for a prompt cmd but gives error 2 when connected to the Exec.vi system.  He suggested that the memory is full, but calling sysexec is literally the only thing in VI.  I restarted the laptop (Win 7-32, LV 2011, 4 GB of Ram, Dell E6410) and re-run the VI before anything else - same result.  Tried to put the command in a BAT file and call that - same result. The VI and the prn file are saved in the same directory.

  Try this: http://digital.ni.com/public.nsf/allkb/EA1600EBA422E97286256AA20073C616

• Cannot read the CD after you have used the active file system

  I use the active file system in Vista to save my work on CD - R. I have often refer to these discs, and occasionally add other files. Once the disk is full, I start a new.

  After referencing files on a disc, I pushed the button as usual. The disc was not immediately ejected. A window on the toolbar open and told me to wait and finally ejected the disc.  When I tried to use the disc again, I could not access the data. I know that the data is still on the disk. In 'Computer' I see '327 MB 702 MB free space'.

  If I click on the drive or try to open it, I get a message "no answer." Finally, I get a window that says to "drag files to the disc to add data. Vista think it as a blank disc.

  Is it possible to access data on the disk, so I can save up to a new drive? Also, what hurts which has caused this problem? I don't want to do it again.

  Thank you!
  Bob

  Hello

  Check the drive in another computer, better check in several. CD and DVD door, especially
  RW. If the question with a single disc? There are companies that may be able to recover the
  data if it is quite expensive.

  Very good idea to have redundant backups.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to use the pc 610y system recovery CD

  How to use the pc 610y system recovery CD

  Hello:

  Please read the info at the link below... Recovery discs recovery section.

  http://support.HP.com/us-en/document/bph07145

• My account is active, but Adobe PDF Export ask me to sign up again. The system worked only once on my PC, using the Vista operating system.

  My account is active, but Adobe PDF Export ask me to sign up again. The system worked only once on my PC, using the Vista operating system.

  You must connect prove you are currently subscribed.

• Defragment the computer freezes, chkdsk has revealed no error. Manual operation of defrag.exe help as meeting the same gel administrator command prompt

  Hi all

  Bit of a strange problem with Windows 7. I can't get defrag to work on any level. Running manually using a system Accessories/tools works for about 20 minutes before the computer hangs completely and requires that the start/stop button to press. I have run chkdsk and supposedly there are no errors on the hard drive.

  I tried running as admin - c:/c defrag.exe command-line prompt and several variations of it, but all have problems about 20 minutes in the defragmentation. Also tried in safe mode.

  The strange thing is that the computer does not display instabilities during normal operation. My tuneup software has identified that the hard drive is very fragmented. I do not think that the third-party software it will solve as Tuneup has a command defragment and which freezes some 20 minutes after the start.

  Any recommendations?

  What tune up software?

  Its likely that dubious Tune Up software is the cause of system problems

• My administrator accounts will not accept PW administrator when you try to run a program. The IPL is corrent, because I can't lon on the administrator account by using the same PW. Any advice?

  Must be explicit

  Hi Ronnox,

  1. do you receive any error messages?

  2. were you able to use the Admin password before?

  3. did you of recent changes to the computer?

  4. This occurs when you try to access a particular program?

  If this only happens with a particular program, you can try uninstalling and reinstalling the program and check.

  Uninstall a program

  Hope this information is useful.

• command to bring up a command prompt at an administrative command prompt

  I did too much work with Windows XP lately. Now, I'm working on a Vista system troubleshooting, and I continue to start a command prompt, run a few commands and then says that I don't have enough privileges even if I am logged on as an administrator. Is there a command that I can use command line so that it becomes a guest of administration for the times I forgot to do a right click and "runas admin".

  Basically, I'm looking for the equivalent of typing "knew" under Linux, although XP and 2000 taught me this connection as the admin is, as logging as root. This is no longer the case without user control gene, I want to do on this system, because I don't trust of the user that I'm fixing the deactivation.

  Really, it's amazing how everyone is so excited for you say 1000 ways to get to a command prompt by closing the one you have and by creating a shortcut to admniistrator runas.  You're not a fool, and you know how to do this.

  There's no equivalent of "su" I've never been able to find.

  Your command prompt, you can type: runas / user: machinename\adminuser cmd, but who will always ask an admin password and opening a new window cmd...

  This is sure of what you want, and it is faster than messing around with a shortcut.  It is not always exactly answer your question, but maybe that's good enough.

  David