Call a VI that uses the 'exec.vi system' with the LabVIEW runtime as adapter

Similar Questions

• Can I use the labview runtime engine 2010 with my LV 2012 program?

  Hi all

  I get the new Labview Developer Suite 2012 DS2 in a few days and

  I wonder if it is possible to run LV2012 programs on the LV 2010 runtime or is it necessary to update all my customers to the 2010 to 2012 runtime?

  It is essential to have the runtime for the LV version in which the code is developed.

  If you plan to distribute the new code stored in LV2012, you must also LV2012 engine run.

• How do to identify the documents called "models of library" using the RESTful API?

  How do to identify the documents called "models of library" using the RESTful API? Furthermore, what constitutes a document to be a "model of library"? I see nothing in the libraryDocuments RESTful documentation that describes this type of document, such as presented on the tab 'Manage' my developer account. Please see the screenshot below. There is a model of Document named "[DEMO ONLY] Test model" listed under "Library Templates" and I try to figure out which classifies that document to be included this way and how does produce a similar announcement by using the RESTful API.

  

  Thank you!

  Hello

  You can connect to access library models using the REST API, use 'GET /libraryDocuments' allowing to recover documents in library for a user. Models are created in the account of EchoSign, which later are accessible via the REST method mentioned above.

  Jat

• Applications that use the non-public API will be rejected

  Hi guys

  Just read the iOS guidelines before getting too deep into the manufacturing of the native version of a web application.

  I was wondering what:

  Applications that use the non-public API will be rejected

  We hear when to submit an application in AIR - does that mean that you can not use your own custom classes?

  See you soon

  If you mean custom AS3 classes, Yes, you can use those. What you can't do, is create a DONKEY who calls in the frames of the iOS itself.

• Setting the properties of elements of façade in XControl to a VI that uses the XControl

  Hi all

  I'm new to XControls and I try to use them to make a generic digital indicator that fit into a matrix of waveforms of a similar measure and allow the user to display the first value of a waveform, it chooses by selecting the name of the desired channel in the waveform table. I have the XControl work, with a ring filled automatically with the NI_ChannelName of the input waveform array fields and the value of the ring being used to index the waveform table to select the appropriate data.

  What I want to do next is automatically set the value of control of ring in the XControl to the value that the user has selected the last time he ran the VI that uses the indicator. However, the properties of the control ring do not seem to be accessible from the VI that uses the XControl, and none of the XControl General properties seem to be accessible from the front VI in the XControl. The value of the ring is not part of the entrance of DataIn cable waveform table, so I don't have a good method to pass data to the control of the ring outside of what is in this table of waveform. I might add the value in the waveform table, if this helps, but indicators XControl do not transmit their return DataOut appellant VI to allow me to record the user selected value.

  Is there a good way to read and write the properties of façade elements in an XControl of VI that uses the XControl?

  I apologize for not posting my code; the computer with LabVIEW license is having network problems at the present time. I'll post the code when I can.

  Thank you!

  Erik

  In your State cluster typedef container, include a reference to a control of the ring.

  In your vi of façade, in the case of change of Direction, create a reference to your ring and connect to a plan by which he sends out the view state.  Also be sure to write true to the status changed in the result of the Action.

  In your xctl, select New-> property.  Name it after the property in the ring that you want to access.  Use the view clustered State (in your new property VI) to access the reference to the ring; son of a property node.  Change the control value in the appropriate type & connect to the property you want.

  Be sure to connect the path error through everything that might cause an error.

  When you drop an instance of the xctl and create a property from this node, your new property will be available.

• My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam. Skype device code 43 usb video.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  Hello, Aadi467,

  A device driver has notified the operating system that the device failed.

  Run the diagnostic tool of hardware devices do not work or are not detected in Windows on the Microsoft Fix it Center.

  You can also uninstall the software from Cyberlink.  There is a found here download link to reinstall the software after restarting the computer.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/lost-my-CyberLink-and-UCAM/TD-p/760367

• are there any current HP printers that use the HP 02 print cartridges? Old printer C6180 goes wrong.

  are there any current HP printers that use the HP 02 print cartridges? Old Photosmart C6180 printer goes wrong and have a lot of cartridges.

  The Site of HP Pageyield lists the following printers compatible with 02 cartridges:

  • " HP Photosmart 8200 printer
  • " Printer HP Photosmart D7100
  • " Printer HP Photosmart D7200
  • " Printer HP Photosmart D7300
  • " Printer HP Photosmart D7400
  • " All-in-one HP Photosmart 3100 Series
  • " HP Photosmart 3200 all-in-one series
  • " All-in-one HP Photosmart 3300 series
  • " HP Photosmart C5100 all-in-one series
  • " HP Photosmart C6100 all-in-one series
  • " HP Photosmart C6200 all-in-one series
  • " HP Photosmart C7100 all-in-one series
  • " HP Photosmart C7200 all-in-One series
  • " HP Photosmart C8100 all-in-one series

  I do not believe there are all the models currently available that use cartridge 02.

  I heard that HP has (had?) a trade-in program for its intact packaging expired cartridges.  See this post for a suggestion.

• Routing between sites that use the site to site VPN

  I'm running 7.2 (1) two 515 who have a VPN site-to-site set up a bit as follows:

  subnets of the main site - router main site - PIX1___Public IP's___PIX2 - remote site

  The main site router: CAT6506 with engine SUP1A

  Subnets listed in motor SUP:

  SUB1 VLAN

  IP address 180.x.1.x.255.254.0

  VLAN SUB2

  IP address 180.x.2.x.255.254.0

  VLAN SUB3

  IP address 180.x.3.x.255.254.0

  VLAN SUB4

  IP address 180.x.4.x.255.255.240

  PIX1 is the subnet SUB4 (180.20.4.2)

  Remote site subnet: 192.168.1.0/24

  Route the engine by default Overtime toward another router that reached the internet via another public IP subnet.

  Any host on SUB4 can reach any host on the remote site as long as the SUB4 host default gateway is the inside int PIX1 (180.20.4.2).

  No matter what SUB4 host that uses the 180.20.4.1 address (router) default gateway cannot communicate with a remote host, but can communicate with any host from any subnet of the main site.

  All remote hosts can communicate with any host on SUB4, regardless of the gateway of the SUB4 host address.

  All remote hosts can communicate with the router on SUB4 main site, but can not reach one of the other interfaces subnet configured on the router.

  I've added a static route on the SUP engine:

  router IP 192.168.1.0 255.255.255.0 180.20.4.2

  That did not help.

  The uses of motor SUP EIGRP to learn other subnets main site reached through routers, so I added the remote subnet to that:

  Router eigrp 10

  redistribute static

  network 180.20.0.0

  network 192.168.1.0

  No Auto-resume

  No log-neighbor-changes to eigrp

  No chance, no more.

  I can't help thinking that I'm missing something very basic.

  Any help is really appreciated

  Hello

  PLS, find the changes that must be made and checked.

  PIX remotely:

  1. you only need a default route and that you can route your subnets via inside as they are outside, so remove these statements

  2.i see Access-group configured to be applied to the external interface for traffic coming from the outside, make sure that all required subnets are allowed.

  3. in the access list for the corresponding traffic to cryptomap, I see that one included subnet, pls have all included traffic that must be encrypted (as sub1, sub2..)

  Main PIX:

  1. in the access list for the corresponding traffic to cryptomap, I see that one included subnet, pls have all included traffic that must be encrypted (as sub1, sub2..)

  2. is there an 'access-group outside_access_in' access list present in the pix the corresponding traffic - check - the pls

  3. by nat (inside) 0 access-list inside_nat0_outbound, include all your inside subnets that must have access to the remote subnet

  L3 switch:

  1.I see a default route pointing to your router 3640, so pls add a static route to your remote subnet pointing to Pix

  IP route 192.168.1.0 255.255.255.0 x.x.22.2

  2. pls check in your L3 switch, wheter the appropriate subnets sub1, sub2 are learned properly via the conifugred Eigrp VLAN respective

  for example .sub2 and sub3 learning with leap following 8.2, sub 5 via 30.3

  Pls try to understand the topology and make configuration changes and let us know the results

  concerning

  k VB

• Issue of multiple Disqualification tasks that use the same snapshot

  Details of the environment

  ======================

  Disqualification Version: 12.1.3.0.0

  
  

  A snapshot has been created in which the WHERE clause is outsourced and this snapshot table is used in a data quality process.

  Since there are different values passed to the WHERE clause, different jobs who have their own data quality process, but these process reads from the same snapshot table.

  Disqualification does not allow execution of different tasks that uses the same shot to run at the same time.

  Job1 is in operation, job2 throws an exception that the snapshot is locked.

  Any reason why Disqualification has this restriction? Processes are just doing a read on the snapshot table operation, so I was wondering why it was necessary to lock the object.

  We have more than 60 jobs that use the same snapshot and it would inhibit scalability if we are forced to run 60 jobs in sequence and not allow them to run in parallel.

  Can you advice how to fix this problem?

  The short answer is that each task must be executed with his own label of execution. Otherwise, each work is actually being run in the same context, and you will have problems of blocking.

  Please read on the labels of the execution and run profiles in the online help.

  Note that when running with a label of execution, complete results are not written; you need to decide exactly what to write work featuring the views of results you need. All data staged (including the snapshot itself) will be written with a label execution context and you can view the results in the Console of the server. Director will only show the results of the last run.

• I've created a form that uses the value field text to fill the text of another field.  Does not take into account changes

  I've created a form that uses the value field text to fill the text of another field.  However, if I need to change the text, the second field does not update this change.  Instead of reset the form each time, is the Javascript code to update the fields if they have been modified?

  For example I Text1 and Text2.

  When I type in Hello in Text1 I see Hello in Text2.

  Later, if I decide to change to Goodbye Text1, Text2 remains Hello.

  The shape of the hoe can recognize this change?

  Thank you

  Edit: I think I have misunderstood the situation.

  If you want to both fields have the same value, just to give them the same name.

• I'm trying to follow the video to "Change color" and I don't have a lot of options that uses the presenter.  I'm on a PC.  Can someone walk me by changing the color of an object step by step?

  I'm trying to follow the video to "Change color" and I don't have a lot of options that uses the presenter.  I'm on a PC.  Can someone walk me by changing the color of an object step by step?

  Sorry for the delay. Here is the video

• Calculation that uses the function Max Analytics

  Hello world
  
  Hope all is welll...
  I have 2 Calc:
  
  1) Calc_HippaToSortNumber who does:
  DECODE (hold desc, 'HIPAA', 999, NULL, 0, 500)
  
  2) Calc_MaxHoldDesc that uses the above calc in analytic function:
  Max (Calc_HippaToSortNumber) MORE (Student.Id PARTITION)
  
  I have a condition that uses the two Calc for:
  Select the line that corresponds to the max value of Calc by partition
  
  Calc_HippaToSortNumber = Calc_MaxHoldDesc
  
  I get the results I want, but I do not understand how works Discoverer:
  Calc 1 - should be the level of the detail line to assign a number based on a field to hold alpha Desc
  If keep Desc = Hippa, 999
  = Null, 0
  other values, 500
  
  Calc 2 - is an analytic function, so it happens after query calculates its results in detail
  
  BUT THE condition is testing the analytical function: this condition runs after the execution of the analytical function
  against all preliminary results?
  How does he know Scout to perform the function after execution of the analytical function
  instead of on the level of detail / row?
  
  The following test data:
  pls advise, tx, sandra
  
  ID take Fname Lname desc calc_HippatoSortNumber
  ==============================================================
  1 adams alice Certification BLS 500 max (500)
  2 Brown brett HIPAA 999 max (999)
  4 BLS Certification 500 Caroline Chin
  4 Caroline HIPAA 999 (999) max Chin
  
  I want to show only 3 lines using the analytical function max for the id field studying and comparing each
  the partition to the max value line and by selecting the line with the max value.
  1 adams alice BLS Certification 500
  2 Brown brett HIPAA 999
  4 Caroline HIPAA 999 Chin

  Hello

  How does he know Scout to perform the function after execution of the analytical function

  instead of on the level of detail / row?
  Discoverer always runs the latest analytical functions and therefore conditions by using analytical functions are also processed last. Discoverer for this by using a query online and therefore the structure of the SQLused

  Select Lname, Id, Calc_MaxHoldDesc, Calc_HippaToSortNumber)
  SELECT Id, Lname, DECODE (hold desc, 'HIPAA', 999, NULL, 0, 500)
  Calc_HippaToSortNumber, MAX (DECODE (hold desc, 'HIPAA', 999, NULL, 0, 500))
  ) Calc_MaxHoldDesc OVER (PARTITION BY Student.Id)
  Of...
  )
  WHERE Calc_HippaToSortNumber = Calc_MaxHoldDesc

  Rod West

• A query on the LabVIEW runtime engine.

  Can I access front of LabVIEW through Internet Explorer even if I do not have LabVIEW installed in my computer?

  The LabVIEW runtime engine works in this situation without the help of LabVIEW software?

  > Can I access front of LabVIEW through Internet Explorer, even if I do not have LabVIEW installed in my computer?

  Yes

  Server must have the labview, labview Web Server runtime and should be run remotely front panels.

  > LabVIEW runtime engine works in this situation without the help of LabVIEW software?

  Does not understand the question.

  Engine run LabVIEW is a LabVIEW software, which is required to run files executable labview. In the case of remote façade panels screws (exe) running on the server that has the run-time engine. Page Web you are viewing in the browser (client) gives you a picture and monitors where you click on it. It passes those clicks to the server, it changes picture accordingly (going on those clicks for labview, gets the update of this photo). Customer does not screw, so should not be the runtime of LV.

• System error 31 during the loading of the LabVIEW runtime engine

  I get the following error message.  I've attached a screenshot of him as well.

  System error 31 during the loading of the LabVIEW runtime engine (\\lvrt.dll)

  I'm trying to update an instrument running Windows 95.  What is system 31 error?  I can't find anything on this topic using Google or the search function of the forum.

  The instrument is a Romulus-IIIA of the Quad.  Chasing the assistance on their part as well.

  Hi Szandstra,

  See the knowledge base article describing what you see.  Follow the steps there to correct the problem.  Have a great day and let me know if this solution does not work for you!

• IPhone-to-iPad call phone cellular continuity uses the data

  Many times I drive to work using my iPad Mini 4 WiFi + cell phones driving to work to play music of different applications via bluetooth to my car audio system.

  Whenever my phone rings, my iPad has the T-Mobile (my support for iPhone & iPad) also allows cellular continuity. My question is, if I were to answer the call on my iPad I will be charged data or the call still counts against cellular minutes? So, basically the iPad use VoIP (data) or VoLTE (phone calls / minutes) to manage the call? Thanks for any help!

  Updated - talked with my contact at T-Mobile, who is Advisor senior technical/engineering. He said phone calls on iPad via transfer cell/continuity is currently working on Facetime Audio that is essentially a VoIP service and use the cell data.

  However, T-Mobile is looking for ways to eliminate the use of data for its customers on Facetime Audio (and perhaps even Facetime video as well) through their programs free music and frenzy on. If that happens, it would be incredible!