run cmd as administrator by script
not in a click! I know that!
with the command script on command prompt!
You can use this VBScript file:
Tags: Windows
Similar Questions
-
Explorer Windows stopped working, and it wont let me run cmd as administrator.
A few months ago, I got the error message "Windows Explorer has stopped working". He asks if I want such online for a solution, or close the program. I looked online and everyone says to run cmd as administrator, and then type Sfc/scannow, but when I right click on cmd after a search on the start menu, it says that it has stopped working again. I also tried to run cmd as an admin using Crlt-shirt-entry, but he always says that it has stopped working. I use Windows Vista Home Basic 32-bit.
Hello
Use the Safe Mode if necessary - repeatedly, press F8 that you start.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
How to run cmd as administrator by default in Windows 7
I use the command line for automation using selenium using a batch file. But in windows 7 when if cmd is not running as an administrator, at the launch of IE9 it gives me an error and my automation execution fails.
So, I thought that I have would always "run as Administrator" in the cmd.exe Properties sheet. However, this could not.
Then I thought that I would change the permissions for cmd.exe to "Full Access" to the members of the local Administrators group (including myself), so I have would be allowed to change the properties. However, this could not either.
I'll have to use the 'real' administrator account (you know, that I have to activate it first and then turn off after) to do this?
Or y at - it another way?You can use the Task Scheduler route, run CMD high (without the UAC prompt).
-
I need help, please
Hi Sirawut,
I suggest that you perform an upgrade on site to solve the problem with the operating system. Contact the manufacturer of your computer / system administrator for the installation cd/dvd and refer to the article below for the upgrade on the spot.
How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
WARNING: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.
http://support.Microsoft.com/kb/2255099
Let us know if you need any other help.
-
cmd.exe is still running as an administrator, how do I stop?
I have a few machines here where cmd.exe (command prompt) is still running as administrator and some machines, it does not work.
Now, I know that it is the opposite of what everybody is asking. But how can I do to cmd.exe does NOT always work as an administrator.
I checked all the usual places, properties, shortcuts, none of them had the "Run as Administrator" check box selected.
I found a registry hack here http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/always-run-cmdexe-as-administrator-the-journey/eff735b4-9c65-444f-a943-e1707f74cd14 (#13 answer) but I checked the registry database and it is not set.
Is there another registery hack that someone used here?
There must be some "secrete location" that is defined, I guess a registry hack has been implemented.
You get this screen when UAC is set to its lowest level.
-
Questions of queue printer after clearing by running cmd prompt
I'm dealing with an old xp computer based. I work in a chemistry lab and some of our instruments are systems of inherited types. Out of everything I just this morning and I have a paper stuck in the print queue. Not really big a deal, but I was not in a place to turn to reset the entire system (you will need to disable analytic system also although it will not re-sync to pc, unless all the pieces are propelled to the bottom to the top at the same time). Then I typed and ran the standard .cmd guest found on the site of tech from microsoft here: http://support.microsoft.com/kb/946737
The problem that I use here is that a step in the last paragraph is not actually happens. The command is on a constant loop, creating the problem of the printer is not not able to connect to the system and allowing the impression to continue.
So, I did this several times on the systems of the House over the years and has never had any sort of problem ever. This isn't exactly a disastarous near future problem but certainly is soemthing that I need to fix in the medium and long term.
I even tried the most obvious solutions such disconnect, hard reset, etc. as well as just to add the printer again setting the copy default. All that serves to do is allow me to create documents printed in our analysis software, but the command to actually have the printer put some ink on the page is ignored. He goes to the queue, but it is there for the moment, 35 minutes.
A reflection as to why this might be happening and how I can fix this problem?
I can get you some specs if you need, such as the version of windows, etc. All I can tell you offhand knowledge is that it is a very old system. The printer used is a HP LaserJet P1006 and the instrument is fixed to it is approximately 27 years. The computer is a Dell Optiplex 755 I have beileve generated somewhere in the area from 2006-2008.
Note If anyone QC of Microsoft coming on this post:
SignIn upward for a microsoft after that account was a nightmare. Took me to create accounts with two email addresses, more than 35 trying to connect until the password is recognized and I have the key to time (not) sent to my phone at least 3 or 4 times beofore I could finally check my email. Let's not even start on how this site basically does not work in chrome which is my preferred corporate browser and IE is troubled and dysfunctional with slow loading times. Just an end-user of entry to be considered.
Thank you all.
I don't know what you mean by that:
The command is on a constant loop, creating the problem of the printer is not not able to connect to the system and allowing the impression to continue.
but there is no real need to create a command script as described in this article. Just open a command prompt window (start > run > cmd > OK) and type the commands in hand:
net stop spooler {press Enter}
del/q '% windir%\system32\spool\PRINTERS\*.*' {press Enter}
net start spooler {press Enter}
exit {press Enter}FYI, the above /Q switch is optional: it means "go ahead and delete without asking confirmation to Yes/No." In addition, the above command removes just all files in this folder - but there should not be any files other than the files *.shd and *.spl anyway.
Enter orders manually must work or give you an error message more significant than executing the script.
Microsoft has created one of its automated FixIt tools to remedy this situation (this may or may not be the one that appears when you go to the article you quoted):
FixIt 9662904 ("Lighting mode" = do not check the box to restore the values by default the spooler). You can read about this tool and what it here--> http://blogs.technet.com/b/askperf/archive/2012/02/24/microsoft-fixit-for-printing.aspx?Redirected=true -
Dear all,
Firefox crashes when I try to play flash videos from any website, but when I run firefox as administrator, it works very well. (but Google Chrome, Opera & I.E9 video parts without administrator.) I use Windows 7 & Firefox 7.0.1. Help, please.One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.
See:
-
When running java get error (java script false) when trying to uninstall get error message (error application of transformations. Went to sunmicro systems, but can not find help. Also having problems with script errors. I'm debugging the scripts not controlled. Using windows xp IE8.
I think I need some type of uninstaller or need assistance.
TYVM
Connie Pitre
E-mail address is removed from the privacy *.
Hello
Try the methods provided below and check if the problem persists.
Method 1:
Try the steps in the link below of the Java Support to solve the problem with the error application transforms during the uninstalling of Java.
Error application of transformations
http://Java.com/en/download/help/error_applying_transforms.XML
Method 2:
To fix problems with the Script in Internet Explorer error click the link below.
How to resolve script errors in Internet Explorer on Windows computers
-
OK my firefix in the computer played upwards and today I get a call from 'windows service center' on my internet download something wrong and some viruses (I did not really understand the cause of his accent) and she addressed me by my name and said that there was an error report sent to them... I don't use this computer sound more for my parents who could easily tell that it has been sent... then ask him which causes computer that I have more than one and she asked me to check for computer label... so I turn it on and she told me to go to run-> cmd-> and type strive I think but as soon as I pressed on enter she hung up so now im getting really worried...
Hello
1. do you ever run a repair of Microsoft call?
Microsoft does not make unsolicited calls. Take a look at the thread below.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/received-scam-phone-call/f7c13381-f0ab-42E3-A990-ae473257e3ce -
could not access vb run time for custom action script
I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services. Any ideas?Hello
I suggest you run the fixit and see if it helps:
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Also check out this link:
It will be useful.
-
User profile runs as an administrator for the daily work and this account is corrupted and switch every time on my laptop, just open a temp file (created), I downloaded a driver to run my cell phone as a modem while he is on vacation. and the problem started after downloading this software,
Hi johnnyroque
Thanks for posting on Microsoft Answers.
Try to use the following steps to enable the built-in Administrator account and further, then the steps and links to fix a corrupted profile.
Please start on the mode of the Windows recovery environment (WINRE).
-To start the computer into WinRE mode, insert the Vista CD in the CD tray, restart the computer.
-When you are prompted to "press any key to boot from the CD-ROM..." Press ENTER.
-Select the language by default, click Next.
-Select "repair your computer".
http://www.Flickr.com/photos/freeed/363935713/in/set-72157594490796701/
-Select command prompt, and then type the following commands:NET user administrator / Active: Yes
NET user {user account name} {new user password}Note: Please enter the user name and the password without the braces of the flower.
-Restart the computer normally.//////////////////////////////////////////////////////////////////////////////
To fix a see corrupted profile link below:
http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxPlease post back and let us know if it helped to solve the problem - thanks Ken
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Why Microseven Video Clip for Windows 8 should be run as an administrator
Can not record video clips in Windows 8, the system alerts that "must be run as Administrator". I installed all the software supplied with the camera IP and mentioned in the statement, but may not always successfully save videos to Win 8 64 bytes system, can someone tell me what the problem is? Thanks in advance.
Hi Luwen,
Microseven M7RSS recoding on Windows Server software is only take Windows PC/server (Windows 7 and Server 2008 or later version) 2 to 5% CPU when it records 16 cameras IP Microseven. New video recording M7B15 and M7D12 HD cameras will require more hard drive space. Windows server 2008 or later version is installed on the big C: drive. Software M7RSS of record records the video content of the IP cameras on the C: drive. C: driver is installed OS as well, it is protected by the privilege of the user and administrators required. In this case, if you need to run the M7RSS software as an administrator to write the content of the video recordings on the C: drive. Otherwise, you can use a hard drive or drive partition hard different external drive instead of C: drive.
For Windows 8, it runs as an administrator if the video content are recorded video on the C: drive. You can also view information about the compatibility of Windows 8. Information is available on the compatibility Windows 8 Centerfor M7RRS.
Program compatibility is a mode in Windows that allows you to run programs written for earlier versions of Windows. Most programs written for Windows 7 also work in Windows 8, but some older programs might run poorly or not at all.
If M7RSS is not compatible with Windows 8, you can try to install the same in compatibility modeand check if it works.
If the problem persists, you can contact the device manufacturer for assistance.
-
run a package through shell script
Hi trying to run a package through shell script.
But it is failling. Some may point out why?
Here is the code im with
==================
sqlplus user/pwd s < < EOF
coil file.log
START the user. PKG_Name.RUN_job;
commit; END;
spool off
output
EXPRESSIONS OF FOLKLORE
===========================
I am able to run using the code below Toad.
'BEGIN user. PKG_Name.RUN_job;
commit; END; »What error do you get? Use
sqlplus user/pwd s<>
coil file.log
START the user. PKG_Name.RUN_job;
commit; END;
/
spool off
output
EXPRESSIONS OF FOLKLOREKind regards.
-
Run-time error '380': a script engine for the specified language cannot be created.
I have a brand new Dell Inspiron, Windows 7 Professional. I'm trying to load a training program that I already use on a Lenova running Vista 32 bit Service Pack 2. The load starts and then pops up this error message. I tried to start the compatibility mode for older software but no change.
Any thoughts would be appreciated.
You have installed Windows 7 SP1?
Error "Script engine for this specified language does not exist, #380.. When you try to run an integration
http://support.Microsoft.com/kb/859712Try right click on the actual Setup.exe and choosing the option "Run As Administrator"? Perform, even if your user name is an administrator.
Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"? Perform, even if your user name is an administrator.
-
In the CMD window administrator rights.
How to raise my rights ADMIN in one window CMD? Sound my PC and I already have admin rights at the level of windows.
It is much faster if you press Win Key + X, then select ask Admin or you can type
runas/user: Administrator cmd
^ only works if you have the active administrator username and that you know the password.
Maybe you are looking for
-
Example: After 'agreeing' Microsoft agreemen, trying to scroll through the dowwn to 'next' or 'continue' is not possible. Using Vista with a Dell 21 inches screen.
-
EPUB does not download properly
When I download an epub ebook that I bought the download is delivered in a format of windows shell and not an icon epub or format. I can't even download a copy for you to watch. It says invalid file format. What is the problem and how can I solve t
-
can I safely remove the library documents reconstituted in windows 7?
My computer (drive C) is a 9 GB of satiety, and I need to reclaim space for data. Can I safely delete the files in the folder of reconstituted under my documents document library? If not, how can I recover more disk space?
-
Public using DBLinks in Oracle APEX
Hi all, have no restrictions in the use of public DBLink Oracle apex?Thank you.
-
txt rollover - image appears in the background
Hello!Is there a way to get the substitution effect, as it is done on this site? http://geordiewood.com/Thank you very much!JO