Run DAQmxWithUI DotNet example

Similar Questions

• I have Microsoft s Essentials, in the past, I've always had a prog to Add anti-virus ' l. run also, for example, Norton, etc. Can I still use the prog to Add anti-virus ' l.?

  I bought Trend Micro Pro 3.0 (old version) & installed the ver.1st of the trial. I have Windows Vista Home Premium SP 2 and IE 9. The prog. would not respond. I thought that it might have been a conflict w/Microsoft Security Essentials (which was never a prob. in the past), although I have deleted the virus Microsoft prog. Trend Micro has always failed. I think now that it was (not) compatible with IE 9. I've got uninstallled prog of Trend Micro Pro 3.0. and have re-installed the program Microsoft Security Essentials. I have a Playstation 3 & an Android phone, I still have to connect to my PC. I want to download anti-virus Norton 360 or Norton Internet Security, or a more recent version of Trend Micro Titanium Antivirus Program (for peace of mind). I want to still keep the program Microsoft Security Essentials, I was feeling pretty yucky before deletion because in the past, that I don't have problems like this, as when I had Norton Internet Security. It also applies when I had a trial version of Avast Antivirus running with Microsoft Security Essentials, with no problems (I cared not for Avast, that's just my personal preference). My hands & arms are bad, I think I can have on a explained all of this, I hope not. Thank you for your patience.           Thanks for any help (tips), you are able to provide.   dceb2

  It is not a good idea to run more than one antivirus real-time program together. The potential is there for the conflicts and it slows down your system.
  To avoid these problems, use only one anti-virus solution. It is your choice to decide which one to use.

• DIFFICULTY this pl/sql, put in GUARD AND RUN WITH GOOD EXAMPLE

  Please please help me... HOW to TROUBLE WARNINGS AND EXECUTE WITH GOOD EXAMPLE with the syntax
  
  /*
  WARNING: the execution is completed with warning
  FUNCTION EMP_GENDER to update.
  */
  
  CREATE FUNCTION EMP_GENDER (EMP_GEN CHAR (1)) RETURN CHAR (1)
  IS
  CUST_GEN char (1);
  DTECH1 EXCEPTION;
  BEGIN
  CUST_GEN: = UPPER (EMP_GEN);
  IF CUST_GEN! = ' OR CUST_GEN! = 'F' THEN RAISE DTECH1;
  ON THE OTHER
  RETURN CUST_GEN;
  END IF;
  EXCEPTION
  WHEN DTECH1 THEN
  DBMS_OUTPUT. PUT_LINE ('GEN DISABLED');
  WHILE OTHERS THEN
  DBMS_OUTPUT. PUT_LINE (SQLERRM);
  END;
  
  Published by: 923746 on April 18, 2012 23:05

  Hello

  First, you will need to format your code correctly.
  Second, you must remove the (1) Arctic char in the declaration of parameter and the return value.
  (this site comes out "<>" so I replaced)
  CUST_GEN'M ' OR 'F' CUST_GEN
  with
  CUST_GEN! = ' OR CUST_GEN! = « F »

  CREATE OR REPLACE
    FUNCTION EMP_GENDER(
        EMP_GEN CHAR)
      RETURN CHAR
    IS
      CUST_GEN CHAR(1) ;
      DTECH1   EXCEPTION;
    BEGIN
      CUST_GEN    :=UPPER(EMP_GEN);
      IF CUST_GEN !='M' OR CUST_GEN != 'F' THEN
        RAISE DTECH1;
      ELSE
        RETURN CUST_GEN;
      END IF;
    EXCEPTION
    WHEN DTECH1 THEN
      DBMS_OUTPUT.PUT_LINE('INVALID GEN');
    WHEN OTHERS THEN
      DBMS_OUTPUT.PUT_LINE(SQLERRM);
    END; 
  

  Kind regards

  Peter

• AnalogWaveform example of tracing

  I'm looking for a few examples on how to view the analogwaveform of data type on a waveform graph.  I looked at examples of national Instruments\MeasurementStudioVS2005\DotNET\Examples\Application, but none of them use the analogwaveform data type.  The examples in this dir much use a simple example where the data in an array of double.  Are there examples of how to work with the type of analogwaveform?

  Hello
  Steve_InMA,

  There are several examples in the PlotWaveform
  example in the UI\WindowsForms\Graph Directory uses this data type as well as a part of the DAQmxWithUI
  examples such as AnalogDataFileProcessor, GlobalContinuousAO, SpectrumAnalyzer,
  etc.

  The trick that I use to find if there is an example that incorporates some
  data type or function is to do a Ctrl + F on the samples directory,
  a search using "all files and folders", and then type in the
  name of the function or data type in the 'A word or an expression in the.
  the file' field. It works really well.

  I hope this helps!

  Best regards

• Missing assemblies for example: GettingStarted.2008 (ModularInstruments)

  I am trying to run examples of 'ScopeWithUI' in DotNET/examples.  These require NationalInstruments.ModularInstrument.Common, NationalInstruments.ModularInstrument... ModularInstrumentsSystem and NationalInstruments.ModularInstrument.Scope.

  I have not found a message in the forums that corresponds to this question.

  Help.

  Dick

  Hi Dick,

  To be able to run the example referenced, you must install the driver compatible with all hardware AND-SCOPE OR SCOPE. Installation of the driver will ensure that the appropriate assemblies located in the Global Assembly Cache. I am including the link to the page of support here, and you can access the driver via the section drivers and updates.

• Where can I find example of vbnet code to snap or capture images

  I find several examples for image capture (Snap, Grab, etc.) written for vb6 and c++, but not one example using vbnet. Am I missing something?

  .NET examples come with our vision acquisition software, but you must specify that you want the samples installed during installation.  Usually this option is automatically selected if the installer can see that you have already installed the development environment.  In order to install the NOR-IMAQdx and other examples of image acquisition driver, you will have to repair/installation of the software, then select examples to install.  First you must go to the Windows Control Panel-> programs and features:

  

  Then select National Instrumenst software the click "uninstall/change".  The following window should appear.

  

  NOR-IMAQdx select on CHANGE

   

  
  

   

  
  Select this option to install the examples in .NET languages support.  Once the samples are installed, they should be located under:

  Start > programs > National Instruments > Vision > textual examples > NOR-IMAQdx > dotNET examples

• Weird LabVIEW... VI is modifiable at run time

  Hi all

  I have a weird behavior of LabVIEW. I developed a program for my client, and this morning, I sent them the update VI (as well as all the subVIs LabVIEW project, etc) in a zip file. When they unzip and run the program, LabVIEW is weird - when all these while, things work fine (fine as in as planned). Here is what happened.

  At the program, I have the toolbar, the menu bar and the title bar to be hidden. Image 2. PNG is meant. When we hit the run button, all these bars becomes hidden, as planned, it should be, but this time only for a second or two and then they reappear. To make it more strange, the run button in the toolbar became 'white' as if the program does not run. However, there are some indicators on the HMI to show that the program is running. For example, the clock on the lower right corner of the GUI and the status bar has made the point to say something to happen. On the other hand, the buttons on the HMI are editable - you can actually change the size, words and if you press the buttons, it acts as if you want to edit it rather than exploit it. So, we can't really use the program.

  When we inspect the block diagram, the toolbar displays as if she does not - the arrow enforcement is white. However, when we press the button to highlight run, we can see the flow of the program. 1.PNG is a snapshot of what we see. While execution is highlighted and crosses the state machine, we could change the size of the structures, change the constant enum, etc.. In addition, we have changed a value in the shared Variable "RT Error". That will make the program is essentially read this value, updates the status bar on the front panel and reset the value back to zero... and the program behaves as it should. So, this somehow tells us that the (front panel and block diagram) program works. All these are cool, but if I can't use the buttons on the HMI, the program is unusable.

  I did LabVIEW for 9 years now, this is my first time see this phenomenon. Please can someone explain what is happening here?

  Help is very appreciated!

  BEA

  
  

• FileIORT example of CVI

  I'm trying to deploy the example of FileIORT for the CVI environment.

  I am able to create the DLL, but as I try to run the DLL on the RTTarget, I get a message

  LabWindows/CVI debugger tries to connect to

  FileIORT.dll

  Please run the LabVIEW VI that uses this DLL.

  I have not modified the code.

  No reason for such a scenario?

  Concerning

  Rambeau

  Hello Rambeau-

  It seems that you have chosen to "debug DLLS called from LabVIEW" when you were selecting an execution for debugging target in the run.

  

  Unless you actually use LabVIEW VIs seeking a dll that you built in LabWindows/CVI, you don't need to select this option.  If you are running the FileIORT example, you needn't LabVIEW and if you * should not * select this option.

  If you have not found it yet, I suggest you research through this manual start-up.

  NickB

  National Instruments

• VI run slowly after a specific time

  Hello

  I have a VI that reads data via an arduino Mega Board UART port.
  I have a problem and I don't know how to deal: when I run first time the VI his works very good, but if I let him to run minimized (for example one hour) and after I tried to see the VI and make tweaks (enlarge the window) its very difficult to deal with it, its frozen sometimes get and sometimes his slowly moving. Anyone have any idea of this problem?

  The system configuration:

  OS: W10 (8 GB of ram and i7 processor) 64-bit

  LabVIEW 2015 64 bit

  PS: if I can post my VI, but I know this problem with the other screws.

  Thank you in advance,

  Vlad

  
  

• Examples of loading error

  Hi all

  IM new ICB. I use the CVI 7.1 evaluation version. Whenever I try to run an example or example Finder I get always an error, for example I want to run update.prj example, I get the error message

  "error writing c:\...\cvibuildupdate\update.nidobj"[file access denied file]"someone has any idea how to solve this problem? Thanks a lot for the time of year

  y_m_h

  This looks like a permissions problem with IT - I guess that on your computer, you are not allowed to write in any c:\program files... areas? (Which is where the CVI samples get normally installed.) Just copy the examples in a promenade area where you do have write permission and I'm sure you will be fine.

  JR

• Average running game to fast!

  OK, I am trying to install an old game on my new pc. Beyond good & evil and installation everything worked fine, but when I run the game it works many times faster than it should, but the audio is running at the correct speed. Not that it is possible even end a dialogue for a scene ends often in just one or two seconds, but I found this was a problem on XP and tried to http://support.microsoft.com/?id=896256this difficulty. Unfortunately it does not work and says that I don't have enough memory (I have 12 GB so I doubt that left on my hard drive) and if I run it in compatibility mode no matter what version I run it (for example XP sp3) it says "xp must be at least service pack 2 or higher" or something like that.

  I have Windows 7 with a dual-core processor.

  Hi TheLewis,

  You are having the same experience by playing the games or is it limited to this game here?
  Game in which you try to read?
  You get the same result by playing a normal video and movies on your computer?
   
  The article you mentioned is not applicable to Windows 7.

  I recommend you check the settings in the control panel in the game.
   
  You can find more information on compatibility modes in the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-questions
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can we prevent the popup Scheduler task Service at the start of the system for a scheduled task to run periodically?

  When I have any task scheduled to run periodically (for example, daily, weekly), the Task Scheduler Service dialog box always appears on the logon screen if the computer was turned off at the time of day the task should run. From my experiences, it seems as the process that determines a spot missed his scheduled time does not consider that the PC is turned off. There seems to be no way to prevent this. Even when a task is scheduled to run at the system startup and periodically, the dialog box appears when the login screen appears.

  This analysis is correct?

  I have three tasks in Task Scheduler. I didn't know anything about the task scheduler until I started having the popup. The first time I looked at Task Scheduler these three tasks have been implemented as follows.

  Adobe Flash Player Updater - Annex: every 1 hour (s) 03:05 for 24 hour (s) on every day...

  GoogleUpdateTaskMachineCore - Annex: Run when the user login

  GoogleUpdateTaskMachineUA - Annex: every 1 hour (s) 20:51 24 hour (s) on every day...

  I have no idea how or when it has been implemented in this way, but I only started to receive this dialog box by the end of 2011. Would it have happened during an Adobe Flash Player update or update of Google?

  I changed the calendar. I've now set up three tasks to run at startup of the system. The popup appears now. Is there a reason why I have to trigger these tasks once per hour?

  CSF

  You don't need these tasks scheduled at all.

  You can go to each site and look for updates when you want.

  If you have installed google something he will continue to try to catch up, and if you have installed adobe you can disable automatic updating.

• Example SynchAI-AO does not work

  Hello!

  I use a USB 6621 and I tried to run the code example, ANSIC C SynchAI-AO delivered with the equipment.

  First of all, I got the following error message:

  DAQmx error: terminal Source routing is not found on the device

  Make sure that the name of the terminal is valid for the specified device. Refer to

  Measurement & Automation Explorer of valid names of terminals.

  Property: DAQmx_DigEdge_StartTrig_Src

  Property: DAQmx_DigEdge_StartTrig_Edge

  Source device: Dev1

  Terminal: AI/aiStartTrigger

  Task name: _unnamedTask<1>

  Status code :-89120

  Then I changed the following line (the rest of the code remains unmodified):

  DAQmxErrChk (GetTerminalNameWithDevPrefix(AItaskHandle,"ai/aiStartTrigger",trigName));

  TO:

  DAQmxErrChk (GetTerminalNameWithDevPrefix(AItaskHandle,"ai/StartTrigger",trigName));

  Now I get a different error message:

  DAQmx error: measurements: unbuffered clocked by the hardware operations don't are not supported for this device, a Type of channel.

  Set the buffer size that is greater than 0, do not the sample clock synchronization, configure or

  set timing sample on request.

  Task name: _unnamedTask<1>

  State code:-201025

  I'm a bit confused.

  Running this example is not possible with my hardware (if so, you can get information about the example codes work with my hardware, and which are not)?

  Or is there a bug in the code for the example?

  Thanks in advance for your answers!

  Kind regards

  Christian

  Hi Christian,

  Thanks for posting about the problems you found with this example program. Change ' HERE/aiStartTrigger' to "AI/StartTrigger" is correct. The problem that causes error-201025 is a missing line of code (which goes directly below the call to GenSineWave()):

  DAQmxErrChk (DAQmxWriteAnalogF64 (AOtaskHandle, 1000, FALSE, 10.0, DAQmx_Val_GroupByChannel, AOdata, NULL, NULL));

  Once you add this line, it should work (tested with a USB-6229; I guess that you have a USB-6221?). These problems have been reported to R & D such as CAR #181942.

  Brad

• Programs closed but process shows that it is running

  My computer acted weird since I deleted a virus/malware Protection SystemShield latter.     I have implemented a firewall on my computer also. Some of the problems I've had are:

  • Some computer files were hidden
  • I could only open programs as administrator
  • When I click on a link in my Web browser, I redirected to an advertising page or to one page other than the one that I asked. I copy and paste the actual url in the address bar in order to get the right page.

  I installed Opera on my computer yesterday. When I did, I could click on the links and go to the pages I wanted without being redirected to another page. I left the computer for analysis viral last night.  However, this morning when I used the Opera browser, I started to be re-directed to another page. He behaved like the other browsers on my computer. I also tried to use one search engine other than Google, when I did, I got the same results.  He sometimes does and sometimes did not. I noticed that he did it, in some cases, when I sought information on viruses, redirect virus and tried to visit a website with a forum about this response.  I just use browser yahoo right now looking for apples. I clicked on a link and it went to the right page.

  I have I scanned the computer yesterday and found that there was a virus called Exploit - Table1a.dat (I'm sure that's the name of the virus) on the computer.

  I also tried to convert a program in Visual Basic 2008 for the 2010 version and the installed/uninstalled VB Express 2012.

  This afternoon, while I was using a VB program I wrote, I had a mistake in the program. This is the file permission error that says that the files were not available. I checked the permissions and the account I was did not have the permission to access. To fix this, I closed all the programs that have been opened and ran the Task Manager. All my web browsers, Firefox and IEXP were closed. However, when I went to look in the Task Manager, it showed that the process of the program were still ongoing and there were several programs running. For example, Firefox.exe appeared as 6 x on the process. In addition, periodically, an advertisement would play out of the enclosure. It sounds like the browser was opened and playing an advertising a Web site or a Youtube video. YouTube was the last site I have on and this summer that I had turned off before that happened.

  Also, I noticed that in the permissions for the UAC screen, the following users, the name appears on the permissions of list - batch, Service and Interactive. Is this normal and what do they represent?

  Any ideas on what is happening and how can I solve the problem? Do I have a virus, if yes, what is the name of it?

  Hello

  It would appear that you are still infected by malicious software.

  And no, we cannot tell you the name of the Malware.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• ERROR: The action window says: "NO ACTION is AVAILABLE" while running Norton 360 'Difficulty now' utility in the Windows Vista-based computer.

  Original title: registry cleaning.

  Norton 360 has an Amber 'FIX NOW' on registry cleaning, but when he finished a result message appears "ERROR".

  The window for action says: "NO ACTION is AVAILABLE!"

  So what is the solution to this you problem.

  I also tried "RUN CHKDSK" for example. type cmd then ok followed by "chkdsk c: /f /r.

  Now I get ' ACCESS DENIED AS YOU DO NOT HAVE the PRIVILEGES SUFFICIENT. YOU HAVE TO INVOKE THIS UTILITY

  RUNNING IN ELEVATED MODE '?

  Hi BRIAN,.

  (a) I suggest to uninstall Norton temporarily using the removal tool.  You can download & run the Norton removal tool to remove Norton completely from your machine & see if the problem still occurs.

  Download and run the Norton removal tool to uninstall your Norton product

  (b) later, reinstall the Norton software.

  You can also contact Norton support to obtain assistance.

  Hope the helps of information.

  Please post back and we do know.