Examples of loading error

Similar Questions

• Application package load error: permission denied

  Hello

  I develop on the alpha 10 blackberry dev and yesterday during the deployment of app I started getting this message from QNX Momentics IDE:

  "Synchronization and application startup" has encountered a problem.

  Application package load error: permission denied

  After I started getting this error, I noticed that I couldn't run any application, I already installed on the device, even the example apps provided no longer works (by clicking on the icon was moving the desk on the right for a moment as he normally does, but then the application does not run)

  I tried to set the mode of development, change the debugging token, restart the device and my pc, but it did not help. So I decided to wipe the device and today I reinstalled the operating system. I was able to run the application a couple of times tonight, but the problem started to appear again.

  The error is exaclty the same as before and he does not say much. What can I do to fix this?

  I had the same problem tonight, so I investigated further. I went to settings-> Security-> development mode and I noticed the debugging token has been installed, but it was not valid. the expiry date line said "edition invalid date or in the future." I noticed the time on my phone was incorrectly, I put it properly and now it works again.

• Error loading of HCI and SCI load error

  I have a Tecra A9 and have recently updated the BIOS v2.10 I reinstalled the added value pack, but when I try to run the Setup of HW in the Toshiba Utilities in the start menu folder, I get "HCI load error!" then followed "SCI load error!" but it puts in place a box of dialoge installation with only the 'General tab ' with details of the current version of the Bios.

  This utility to work properly on an another Tecra A9 I installed the same added value pack.

  Popular ideas

  Do you use the clean operating system preinstalled or Toshiba recovery image?
  Why you have reinstalled Toshiba VAP? Have you noticed a few problems in the past?

  When you start Toshiba assist > Optimize is the same error message displayed on the screen?

• get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  This forum is for Microsoft Security Essentials.

  You question is with Oracle Java.

  It is recommended to go to www.oracle.com to get help.

• Get daily Microsoft with Windows XP error messages. And every time that I turn off the computer, it wants to install an update. Example of an error message: NDP1.1sp_KB953297_X86_wrapper.log.

  I remember more recent changes.  I use automatic updates and installing Service Pack 3.  Symantec Norton 360 is installed to protect against viruses, but this is not new.

  Here is another example of an error message: NDP1.1sp_KB953297_X86_msi0.logversiontxt.  I get every day two or three error messages.

  Hello

  The problem is with the update of security Microsoft .net Framework 1.1 sp1.
  There could be a corruption with the .net framework.
  First of all try to download the package to update from Microsoft Download Center and install it on the computer:
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=78ac8b97-8327-4AE1-8BB0-6cf227f3968f

  If manual installation fails, you must delete all versions of the .net framework from the computer and then reinstall on the computer.
  Follow the steps mentioned in the link to the following Microsoft article:
  http://support.Microsoft.com/kb/923100

  Cheers and enjoy... :))

• I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup can not continue "when you try to reload windows xp on a computer problem. What should I do?

  I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!

  Hello

   
  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• Error - Run time loading error file error 31037 when trying to restore the backup files.

  Original title: Run time error 31037

  I'm trying to restore a backup of the data on an old program of accounts, but I get a "Run time Error 31037 file load error" message. I downloaded some ocx files missing and saved these and others that are necessary, but in vain. Can anyone help, please. The program works, but it won't let me restore. Thank you.

  Hi Kim

  I managed to solve the problem with the help of software vendors as the other methods did not help in this case. Thanks a lot for your help and your suggestions.
  Best regards, Bob

• Reviews for .dll file loading error when starting the laptop

  After removing an infection from malware Thinkpoint of my laptop and reconstituted at almost normal speed, a notice of a .dll file loading error appears while booting.  What are the options to eliminate that?

  This isn't a lot of information to go, but it's because forums MS Answers does not prompt for information, when a new question is asked.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Read this and see if it looks like your question and if it is not, let us know exactly what you see and we will always fix it:

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Application load error 5: 0000065434 on Hunted: The Demon Forge

  I buy a game HUNT the DEMONS FORGE and I install the game when end installation and was the star of the game it say (Application load error 5: 0000065434

  WHAT SHOULD DO?

  Have what media you used to install the game? It was the original CD or did you download the game?
  It is a legitimate copy of the game?

  I would like to uninstall the game from Add/Remove programs. Then install again by using the original media/CD and see if you get the same error message.

  Thank you

• Error - loading at start-up, my computer is giving a "loading error" «press any key to restart...» »

  At start-up my Sony Vaio with XP is to give a "load error" "press any key to restart '. .  Pressing a button any does not help.  I shut the computer down at least five times, and I get the same message every time. Help

  REX

  I ran fixmbr too, but you don't need to contact your manufacturer for assistance.

  It is extremely unlikely that any computer purchased at a store bought on this planet will have installed XP Recovery Console.

  It is extremely unlikely that any computer purchased at a store bought on this planet will be accompanied by a genuine XP installation CD bootable that can be used to start the XP Recovery Console.

  It's extremely likely that any manufacturer on this planet will send you an installation CD XP genuine for you can start in the Recovery Console.

  It is extremely likely that the majority of the posters on the forums is not any type of bootable XP media.

  It is extremely likely that the majority of the posters on the forums have never actually seen, possessed or otherwise come into contact with an XP bootable installation CD authentic in their lives, or if they already had in their possession, it is now nowhere to be found.

  I wonder why never support engineers offer this idea for the Recovery Console.

  (a) they do not know how
  (b) they are not allowed to post anything that isn't in a KB article
  (c) they are not allowed to post links to any place outside of Microsoft
  (d) your idea here

  You can make a bootable CD of XP (no XP media required) Recovery Console.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• my system is on the Frits - when it starts up it's a 'windows\system32\qcapk.dll' failed to load error

  Original title: my system is on the Frits

  I have windows xp media center. When it starts up it's a 'windows\system32\qcapk.dll' failed to load error. What should I do

  Hello Sayiwont65,

  Thanks for posting of Microsoft Answers!

  It appears from the description of your problem, you receive a that,"windows\system32\qcapk.dll error' could not load.

  I searched this dll file name and couldn't find any reference to it.

  This is the case, looks like it was caused by malicious software.  Please take a look at this thread that was answered by JoseIbarra.

  Let us know if that helps.

  Best regards

  Matthew_Ha

• Loading error when you try to load the Halo 2 "files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory.

  Original title: load error when you try to load Halo 2

  People at Microsoft, I have a problem trying to load Halo 2 on my dv7 Paviliaon with Vista and the 2.8 GB Intel Centrino 2 processor. When I try and load the game, I get and error stating: "the files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory. "It bothered me for several reasons. One: the disc that I use is an original disc out of the box so hsould have no problem. Two: the game has been loaded previously on the same computer without apparent problem at the time. It has been deleted (don't remember why) and when I tried to reinstall, the error came. Three: I did as recommended and updated all programs and drivers, nothing works. So my question is, how do I reinstall Halo 2 and what this problem will arise if I decide to buy and load Halo 3?

  Thank you for your time in advance.

  Hello

  As you are facing problems with Halo 2, I suggest you to refer the link for better support:

  http://forums.haloonwindowsvista.com/forums/

• On installed SDL Trados Studio 2009, get the provider load error

  SDL Trados Studio 2009, I installed on my computer (windows vista) and after that it worked fine for two weeks, I now get a "provider load error" when I try to start the program. What can I do?

  http://www.Google.com/search?q=provider+load+error&ie=UTF-8

• CMOS-Checksum-Error-defaults-Loaded-Error

  I'm cmos-checksum-error-defaults-loaded-error what is the remedy to get it resolved?

  Please guide me in detail for him.

  The first thing to check and change if you do not already have is the CMOS BIOS battery.

  It depends on the type of PC (desktop computer/laptop) and the brand and model. Search the support site of manufacturers for your brand/model of PC for all the guides.

  However, as a rule - http://www.computerhope.com/issues/ch000239.htm no need to download anything, just read as a guide. Note the static precautions etc.

• Certificate of loading error: could not create the EC public key

  Hello

  I'm trying to set up a development environment for Android applications.

  When you run the wizard of BlackBerry deployment configuration, I have this error in the record of signature:

  "Certificate of loading error: java.io.IOException: subject to key, not able to create the EC public key.

  I'm under Eclipse 3.8 on Linux Ubuntu 64-bit.

  Any help is welcome.

  Thank you!

  Patrick

  Thanks to some more troubleshooting, Patrick and I have reduced the question up to 1.7 Java incompatibility.

  To all readers, our nos exigences requirements of system for BlackBerry plugin reconditioning says a requirement of Java 1.6.

  https://developer.BlackBerry.com/Android/documentation/sys_requirements_1848536_11.html

  I hope this can help some other developers with a similar problem.

  Justin