Run OEM Windows Server on hypervisor on the same hardware?

Similar Questions

• Impossible to activate the OEM Windows 7 after reappattage on the same machine after a disk crash

  When I buy my Mac, I was told that I could run Win 7 on a virtual machine using the Parallels application. I bought the Parallels software and an OEM Version of Win 7 Home Premium and istall and activate it without any problem. Recently, my hard drive crashed and I need to replace the hard drive and reinstall all software including the virtual machine and Win 7. I could not reactivate the Win 7 and I could not reactivate the Win 7 on the same machine.

  Their support came back with a long history to this subject and this restriction and in short to expect me to buy a version full of Windows 7 to install in Mac. Y at - it another way to activate windows because there is no phone number that I can call them and talk to them. Why OEM version is freely available and still no appropriate advice are given to the retailer t explain some limitations? Consumers like us usually bear the burden of all these issues as the purchase of a legal but copy cannot be activated and suckers feels when we were told a long string of legal things that did not communicate to us when we buy.

  Thank you

  Kenny

  It is one of the reasons why it is not a good idea to use an OEM software in virtual machines.

  You must use the activation of the operator and see if they will allow the reactivation.

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• How can I connect to my server (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?

  Hello

  How can I connect to my sServer (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?
  

  Hello Marie Smith.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/

  Hope this information helps.

• You will need to upgrade the ASP to run on Windows server 2008 and IIS 7.0 application.

  I have an ASP application developed with Interdev 6.0; part of .NET and using the time to design Windows server 2000 controls.

  I need to upgrade the application to run on Windows server 2008 and IIS 7.0 ASP. I find some compatibility problems.

  The part that I'm stuck at the moment is the creation of objects in the runtime that gives an error.

  : "800a01ad" VBScript runtime error
  Component ActiveX cannot create object

  Code:

  Set OF = Server.CreateObject ("DERuntime.DERuntime")
  Application("de") = OF. Load (Server.MapPath ("overall. (ASA"),"_private/DataEnvironment/DataEnvironment.asa")

  The MSDERUN. DLL is properly registered on the server with the correct permissions.

  What are the possible solutions outside the upgrade of all of the ASP.net project. ?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• CRM 4.0 will run on Windows Server 2008 R2 Service Pack 1?

  CRM 4

  CRM 4.0 will run on Windows Server 2008 R2 Service Pack 1?  The database server is an instance of SQL 2008 R2 SP1 running on Windows Server 2008 R2 Service Pack 1?

  Please repost your request in a more appropriate in Forum Windows Servers, thank you!

• Activation of Windows still necessary even if the virtual server on the same hardware to restore

  Hello, I hope someone can answer this.

  Our virtual machine running vmware server ESX 3i 3.5.0 has 2 hard drives, datastore1 and datastore2.   All of our virtual servers are stored in datastore2.   Our hard disk with the datastore2 crashed and he had to be replaced.    We have backups of our virtual servers in datastore2 virtual appliance.

  To solve the problem, we replaced the hard drive crashed and then restored by using the virtual appliance backups, once restored, we noticed that the Windows 2008 requires that the activation of the licenses.

  My question is why does windows need activation when we restored the virtual server for the same hardware? The only thing that has changed is the hard drive.

  Thanks for any help on this issue.

  Export/import unfortunately OVFs does not have an option (at least I'm not aware) to maintain these settings. What you can do - when exporting the virtual machine as an OVF - also download the machine virtual . VMX and .vmxf files. After re - import the OVF, remove it the ESXi host inventory, download the two * .vmx files and add the virtual machine to inventory. -Once asked if you copied or moved the VM on the first power-select "I moved it.

  André

• I'm looking for an image compatible Windows Server 2003 vmware study the operating system. Anyone know where I can find an image file?

  Original title: Windows Server

  I don't know where to put this question, so here goes I am looking for a picture compatible Windows Server 2003 vmware study the operating system. Anyone know where I can find an image file?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Can we add this type on the Windows Server that comes with the Microsoft Action Pack subscription?

  Can we add this type on the Windows Server that comes with the Microsoft Action Pack subscription?

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will offer in support of your request:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  Kindly help.

  Hi Sophie,.

  Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Foundation of windows server 2008 comes with the fax server role?

  Foundation of windows server 2008 comes with the fax server role?

  Hello

  I suggest you to send your request from the link and check.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Is it possible to run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer?

  I have Windows 7 * 32 bit running in my computer. But a lot of games that is built on 64-bit do not work in my system. I tried to install Windows 7 * 64 Bit on another partition of my computer. But before the start of the system using the Windows 7 installation DVD, I get an error with the oxc00000e9 status. The info says: unexpected i/o error has occurred.

  My question is whether it can run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer. If so, how to install the Windows 7 * 64-Bit? Thank you.

  Yes, you can, but you will need to have a permit for it if you plan to have both on the same computer.

  the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  Resources:

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

• I have windows server 2008 R2 and windows 7 32 bit on the same network. But I couldn't see the server on the network.

  I have a windows server 2008 r2 server and windows 7 32 bit on the same network.

  I couldn't see the server on the network and

  also I could not access the workstation to the server.

  not more than one device must perform NAT

  Hi Bruce,.

  Given that you are working on Windows server 2008 R2, please post your question here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows Server 2003 external to the application of the Apex and listener Apex?

  Hi all
  
  I have oracle RAC INSTALLED on solaris with three knots. I have several users with the CCR. I want to install APEX so that each user can access APEX if they need. Based on the Google search I did is not clear for me. My goal is to stay away as much as possible of the production systems. Could you please tell me which method can be good to implement this? I think following methods but I don't know if they are correct.
  1 - Position the external Apex of Windows Server 2003
  2 - Place the Apex listener in Windows Server 2003
  3 - allow the user connect to the Windows Server to access Apex
  
  Thank you

  Hello

  APEX needs to be installed in a database. If you do not want to expose your RAC and use a separate instance of the database, users will not be able to access the data available in the CARS (unless you create database links, but you usually don't want that).
  You can install APEX Listener on your Windows 2003 to access the APEX facility in your RAC database. You must choose a J2EE container to host your listener of the APEX. See APEX listener installation guide for supported containers or search the forum or google to find out what other containers may be suitable for you (for example Apache Tomcat is not officially taken charge but able to accommodate the listener).
  You need to configure the firewall and/or rules of routing for all users may access the port used by the container.

  -Udo

• Windows Update continues to install the same update over and over again

  Windows Update will continue to install the same update again and again for about a week now. He always says the update was installed successfully but in 2 minutes windows update wants to install the same update again. I went directly to Microsoft to check updates and it shows me who need the update even again in the history of the update, it shows the update installed successfully at least 10 times. Update for Microsoft security update

  .NET framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2446708) (update 1 of 1)...

  Hello

  I had exactly the same problem and it resolved the response in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/security-update-for-microsoft-net-framework-4/f7c1fbbb-8c66-e011-8dfc-68b599b31bf5

  Why don't give you it a try?

  I hope that helps!

• Disabling a Windows Firewall which is on the same domain of the remote computers.

  Hello world

  I have a Windows Firewall client machine is activated, preventing me from rattling of the machine or by connecting remotely. The user logged on to this computer doesn't have permissions to disable the firewall. How would turn off the firewall on the computer on my side?

  The machine runs Windows XP and is on the same domain as my pc.

  Thank you

  I think I found the solution:

  First, you must obtain the correct name of the service, apparently the display name of the service is not the actual service name.

  SC getkeyname "Windows Firewall"

  This gave me the correct name for the service, "mpssvc.

  I then ran the new commandment:

  SC \\computername stop mpssvc

  This service order.