Activation of Windows still necessary even if the virtual server on the same hardware to restore

Similar Questions

• 7.0 Firefox crashes at startup (including safe mode) as a standard in Windows XP SP3, even after the clean install user

  Hi all

  I need help. 7.0 FF crashes at startup / launch every time, even in safe mode of Windows XP.

  I've initially automatically upgraded to version 7.0 the FF of the version the latest version 6. This automatic installation crashed, then I downloaded again v7.0.

  I uninstalled my existing installation of FF6, including personal settings and ran Setup v7.0. He appeared to install successfully, but crashes at launch. I repeated this process several times with the operating system restarts without success.

  I also ran FF in safe mode of Windows XP, but have experienced the same crash at the launch of the application. FF now display only the 'Crash Reporter'.

  Reminder:

  • I am running Windows XP Pro SP3 on a computer.
  • The machine is on Tivoli Access Manager (but I choose not to use it)
  • I ran a scan anti-virus AVG Free with no result.
  • I did a scan of MalwareBytes Anti Malware. An infection was detected (since corrected) as follows:

  Infected registry data items:
  HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\SystemRestore\DisableConfig (Windows.Tool.Disabled)

  Please let me know if you need more information.

  Any help would be greatly appreciated. Thank you.

  ========

  Crash IDs:

  • Crash ID: bp-5597bbcc-ba4d-4d09-ba9e-2da392110928
  • Crash ID: bp-da02239d-c951-4aaa-8b47-ec5922110928
  • Crash ID: bp-3adc8e1e-f5ea-47dd-8b20-089a82110928

  If you completely stop Tivoli, will launch FF 7?
  Tivoli is based on the same code as Passlogix v - GO. If it does not work (even paused), it causes a conflict. The purpose of assistance of Mozilla is at the origin of the conflict.

  I'm curious to know if the reg key parameters are the same as the post above Associates

  The "reg" shift key is probably set your field of business via GPO that prevents you to configure system restore settings. Probably not an "infection" but MalwareBytes can pick it up as a false positve.

• Windows Update continues to install the same update over and over again

  Windows Update will continue to install the same update again and again for about a week now. He always says the update was installed successfully but in 2 minutes windows update wants to install the same update again. I went directly to Microsoft to check updates and it shows me who need the update even again in the history of the update, it shows the update installed successfully at least 10 times. Update for Microsoft security update

  .NET framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2446708) (update 1 of 1)...

  Hello

  I had exactly the same problem and it resolved the response in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/security-update-for-microsoft-net-framework-4/f7c1fbbb-8c66-e011-8dfc-68b599b31bf5

  Why don't give you it a try?

  I hope that helps!

• Disabling a Windows Firewall which is on the same domain of the remote computers.

  Hello world

  I have a Windows Firewall client machine is activated, preventing me from rattling of the machine or by connecting remotely. The user logged on to this computer doesn't have permissions to disable the firewall. How would turn off the firewall on the computer on my side?

  The machine runs Windows XP and is on the same domain as my pc.

  Thank you

  I think I found the solution:

  First, you must obtain the correct name of the service, apparently the display name of the service is not the actual service name.

  SC getkeyname "Windows Firewall"

  This gave me the correct name for the service, "mpssvc.

  I then ran the new commandment:

  SC \\computername stop mpssvc

  This service order.

• My HARD drive is toast. Can I reuse my key of the Windows operating system to reinstall the same OS on a new HARD drive?

  My HARD drive is toast. Can I reuse my key of the Windows operating system to reinstall the same OS on a new HARD drive?

  You are allowed to change a hard disk with an OEM license

  If you have problems with Activation, which you shouldn't, try this method:

  Try this and take the Option phone hang for a real person explain to the:

  http://www.Microsoft.com/Windows/Windows-Vista/quick-start/activation-FAQ.aspx

  FAQ of activation to the. link above

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. take the phone activation option and brace yourself for a real person. mm

  See you soon.

  Mick Murphy - Microsoft partner

• How to use the platform of character even in the same scene several backgrounds without looping the platform of character chronology

  How to use the platform of character even in the same scene several backgrounds without looping chronology of the platform of character? Is it still possible without having to do the scene with another background on another file? To better explain the situation, I have a flash file which has a background and a rig which passes to another context and drilling on another layer and keyframe, but when I go back to the previous background and chronology of this drilling rig repeats, rather than leave, you are doing a new time for this platform. Do I need more than one file?

  In order to reuse assets to animate, you need to duplicate each symbol in the scene who will be the new animation. So, copy and paste the stage on a new layer, right-click on it and select double symbol, then double-click inside the symbol and select each symbol that is going to change, so that the background and the rigging and also select symbol duplicated for those files as well. usually, when I animation I do not use the main platform in the scenes, duplicate as 'Guy1_sc 1', then place it in the scene so that the path I never uses the master file. 'Guy1_sc 2' is a different file. Also if you lipsync and stalled the head separately you will need to reproduce, so, for each scene, is also unique. I hope this makes sense.

• You can use the activity tracker and an application running at the same time?

  I've been running just with my watch and the Apple activity tracker.

  But I wanted to calibrate so tonight I ran with my iPhone, too.

  I tried to use the Nike + and the PPP of activity both starting on my watch. I ran with the application of the activity on the screen.

  When I did I stopped the activity app and went to the Nike + app, but it was stopped.

  Then can you run the application of activity and a different running application at the same time. Or do you need to start another app on your phone and activity on your watch?

  Thank you all

  Hello

  To save your route at the same time apps, save the workout using the application of the workout on your Apple Watch (early check it there first) and also through the application of Nike + running on your iPhone.

  Monitoring of your training via the integrated application of the watch workout will cause your heart rate to be monitored at all times for the duration of your workout.

  The app Nike + running cannot currently access heart rate monitor watch directly, but if I read the heart rate data of the health on the iPhone app, it will always be able to access - indirectly - the same heart rate for your exercise data:

  -On your iPhone, in the application of health, press Sources (tab) > Running > turn on Allow 'Running' to read heart rate data.

• I sent 2 SMS to the iPhone even from the same location 1 hour out. Why I was charged for the second message, but not the first?

  I sent 2 SMS on the phone even in the same place 1 hour apart. I was charged for the second message, but not the first. Why charge me? I was under the impression that the messages sent between iPhones are free?

  I was under the impression that the messages sent between iPhones are free?

  It's a little more complicated than that.

  If the message is sent as an iMessage (blue) uses the data that could be part of your cellular data allowance or WiFi depending on what you are connected to. If it is sent as SMS (green) it takes however your carrier charges you for SMS.

  For a message to be sent in an iMessage, both parties need to have a device capable of iMessage (e.g., iPhone, iPad, Mac), iMessages allowed to have (settings > Messages > iMessage > on) and be connected to the data (Wifi or cellular).

• Everytime I open a session Windows installs updates 4 (probably the same)

  Whenever I connect (and disconnect) Windows installs updates 4 (probably the same)

  Assuming Vista or Win7...

  See this discussion: http://answers.microsoft.com/thread/cac55bf2-e271-e011-8dfc-68b599b31bf5 (which now includes a countless number of threads merged to confuse you more).

• I have Windows xp and Vista on the same computer, my fligth Simulator is on xp. How do I play for vista or I need to install Island all on vista

  I have Windows xp and Vista on the same computer, my fligth Simulator is on xp. How do I play for vista or I need to install Island all on vista

  Hi, CPC,.

  Welcome to the Microsoft Answers Community!
   
  You must install Flight simulator on vista as well as Windows Xp and vista are two different operating systems.
   
  You log in to vista, you may not use any of the XP application and vice versa.
   
   
  Thank you, and in what concerns:
  Azeez Nadeem
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you

• in the folder windows images, photo icons are the same and are not actually see a little image of the image. How to make this happen

  in the folder windows images, photo icons are the same and are not actually see a little image of the image. How to make this happen

  Hi tonutot,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. only happens in the pictures folder?

  Check and make sure that the bottom of settings is set correctly on the computer.

  (a) in the currently open folder, click organize on the toolbar, and then click folder and Search Options.

  (b) click on the view tab, and then deselect the always show icons, never thumbnails check box.

  (c) click on apply and OK

  Behavior and change folder views

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can I have Windows 7 Professional and Windows 10 operating systems on the same lap top

  Can I have Windows 7 Professional and Windows 10 operating systems on the same lap top

  Yes, you can, but not with the free upgrade, you will need to purchase a full license for Windows 10 to do this.

  Step 1: purchase a license:

  Buy Windows 10 family/professional edition

  Step 2: Download Windows 10 and create a bootable copy

  How to download official Windows 10 ISO files

  Step 3: Create the partition then install dual-boot configuration:

  How to: install a Setup to dual-boot with Windows 10 and earlier versions of Windows

• Is it possible to run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer?

  I have Windows 7 * 32 bit running in my computer. But a lot of games that is built on 64-bit do not work in my system. I tried to install Windows 7 * 64 Bit on another partition of my computer. But before the start of the system using the Windows 7 installation DVD, I get an error with the oxc00000e9 status. The info says: unexpected i/o error has occurred.

  My question is whether it can run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer. If so, how to install the Windows 7 * 64-Bit? Thank you.

  Yes, you can, but you will need to have a permit for it if you plan to have both on the same computer.

  the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  Resources:

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

• I have windows server 2008 R2 and windows 7 32 bit on the same network. But I couldn't see the server on the network.

  I have a windows server 2008 r2 server and windows 7 32 bit on the same network.

  I couldn't see the server on the network and

  also I could not access the workstation to the server.

  not more than one device must perform NAT

  Hi Bruce,.

  Given that you are working on Windows server 2008 R2, please post your question here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• In Windows 7 Action Center, MSE, and Windows Defender convertible 'ON' at the same time?

  In the center of Action of Windows 7, Microsoft Security Essentials (MSE) is enabled.  I tried to turn on Windows Defender 'manually' and get a status of "OFF"OBSOLETE"? that quickly toggles back and forth

  I'm trying to maximize my options "malicious."  I have NOT tried turning 'OFF' MSE to see if Windows Defender will be 'ON '.

  My real question is, can MSE and Windows Defender, being 'ON' at the same time or are mutually?

  A "full scan" using MSE detected the following malicious program "trojan:Win32 / Tracur.AV". I immediately deleted it. I think it's GONE!

  My "quick" weekly scans did not detect this malware. What a scare on my new laptop TOSHIBA P750.

  Now I take the time 'always' do a full scan.

  Help

  Hello

  Welcome to the Microsoft community.

  If you use Microsoft Security Essentials, there is no need to use Windows Defender. You can disable that and just let Microsoft Security Essentials run things.

  You should only use an antivirus program. using several programs at the same time will cause problems.

  Please refer to this link:

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  It will be useful.

  Let us know if you have any questions about Windows and we will be happy to help you.