"Run" re-setup

Similar Questions

• Windows 2003 Server keeps stopping every hour on and saying that he must run the Setup program to create a domain controller.

  WINDOWS 2003 SERVER STANDARD EDITION

  HELLO TECH TECHNICAL SUPPORT ENGINEERS.

  WE HAVE WINDOWS SMALL BUSINESS SERVER 2003 STANDARD EDITION,

  WE HAVE EVEN INSTALLED AND CONFIGURED IN A WORKING GROUP, WE DO NOT WANT TO CREATE A DOMAIN CONTROLLER,

  BUT OUR SERVER IS BLOCKING DOWN IN ANY ONE HOUR AND SAY TO RUN THE SETUP PROGRAM TO CREATE THE DOMAIN CONTROLLER.

  PLEASE SUGGEST, AS WE DO NOT WANT TO CREATE DOMAIN

  CONCERNING

  DECCAN TEAM

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.

• Windows could not complete the installation. To install Windows on this computer, run the Setup again.

  Hello, here is the thing.

  Reformatted a computer with recovery discs...

  Office to the top and everything looked ok...

  Windows Installer started and makes the computer reboot several times as usual.

  BUT NOW I have a black screen with a window saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  I opened the Task Manager and closed a 'runonce' process, which got the Explorer will... But shit message will not go away, if I close the computer restarts!

  Why did I get this? How can I make them disappear? Windows has not installed correctly? Do I need to install any additional substance to compensate for this?

  + I just noticed there is no partition for recovery in my computer... you know? This thing of 2 GB next to Local disk c

  Hello, here is the thing.

  Reformatted a computer with recovery discs...

  Office to the top and everything looked ok...

  Windows Installer started and makes the computer reboot several times as usual.

  BUT NOW I have a black screen with a window saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  I opened the Task Manager and closed a 'runonce' process, which got the Explorer will... But shit message will not go away, if I close the computer restarts!

  Why did I get this? How can I make them disappear? Windows has not installed correctly? Do I need to install any additional substance to compensate for this?

  + I just noticed there is no partition for recovery in my computer... you know? This thing of 2 GB next to Local disk c

  Hey Abraham G

  you use discs of recovery that are made for your brand and your computer model

  and if you have problems using the manufacturer's recovery disks, you will need to communicate with them about

  It's their recovery process not microsofts

  Walter, the time zone traveller

• Get a Boot Manager error the amount of system memory has changed strike F1 to continue (I have F1 race) or F2 to run the Setup utility

  OT: Sign in

  I got this alert several times before the alert "windows boot manager".

  The amount of system memory has changed (I have more or less?)

  Strike F1 to continue (I have F1 race) or F2 to run the Setup utility

  Dell Dimension 3000 system series

  What should I do? Run the configuration utility

  anconcito

  Irfan:

  1 - no

  2 - Yes

  today after trying 'the memory diagnostic tool' I had the same alert, I clicked on F2, but I did nothing I do not know how

  3 - no

  Hello nacienancon,

  1. don't you make changes to the computer before getting this error?

  2 are you able to boot normally to the desktop when you turn on computer?

  3. have you tried to install any device memory on your computer?

  This problem is related to hardware, I suggest that you contact Dell support to help you better. You can check the links with information below:

  http://support.Dell.com/support/eDOCS/systems/opgx620/en/UG/A02/memory00.htm

  http://support.Dell.com/support/eDOCS/systems/opgx620/en/UG/A02/tools00.htm#wp1114195

  You can follow the technical assistance column for more information.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  original title: Setup error.

  I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  Please make sure you have finished any previous Setup and closed other applications. If the error persists, please contact your dealer.

  I solve the problem... All the error is the file. I don't know but he corrupted and I deleted it.

  I have download it again and the problem was solved. Thanks to you all.

• Flash Builder on Mac Lion 10.7.5 4.6: cannot run the Setup program: certificate revoked

  Hello

  You are aware that FB 4.6 is not install more OS x 10.7.5 and maybe OS X in general?

  Because I really need design view last FB does not offer, I just downloaded 4.6 FB for OS X from Adobe: Adobe - Adobe Flash Builder 4: for Macintosh: Flash Builder 4.6 - Mac OS: thanks

  My real OS X is 10.7.5, Lion.

  Launch of the install.app, it appears an error window:

  

  Please be aware that I know that this message comes from Gatekeeper, see for example: OS X: on Gatekeeper

  The fact is that this problem is not solvable, apparently.

  The problem is with the application signing certificate, as you can see issuing the command:

  bash - 3.2 # spctl - has Install.app

  Install.app: CSSMERR_TP_CERT_REVOKED

  So, here we have a certificate of _revoked_, not a certificate/developer unknown or app unsigned.

  Indeed, unfortunately the problem persists even disabling Gatekeeper:

  bash - 3.2 # spctl - status

  co-pays disabled

  since apparently a revoked certificate is not an error that can be ignored or circumvented somehow.

  As far as I KNOW, the idea behind this is: Apple actually provide no verification quality on applications (they are not "approved by") but may possibly (if there are "problems") block a via the recall mechanism. Because of this, the _revoked? _ check cannot be bypassed/disabled. I'll try as soon as POSSIBLE an upgrade of the OS to see if with the Mountain Lion (10.8) I can possibly force execution Install.app, but chances appear to be rare so far.

  So, Adobe, can you help me please?

  Maybe sign with a certificate valid for this installer...

  FB4.6 is essential because it is the last version with DV. I had to install FB46 on Windows to keep working, but it's no doubt slow me down as everything is on Mac.

  ARO

  a pro developer.

  Hello all, good news: after updating to 10.8.5, Mountain Lion I was able to run the Setup program and all went well.

  Mountain lion allows the user force execution through the command open context menu (CTRL-click) and it works, just as simple as that.

  So my advice is: If you want to install or reinstall Flash Builder 4.6 on a Mac with Lion installed, updated to Mountain Lion or better to avoid problems.

  Apple introduced some (not all) Gatekeeper 10.7.3 and following features, but apparently you need a full-fledged 10.8 to also have what you need to work around a revoked certificate error.

  Since usually OS X has auto update active, if you run Lion you find with 10.7.5 and do not install FB46. If you manage to somehow hold 10.7.2 I guess you should be able to install FB46, sincerely I don't check it out. In any case, it is simpler and safer to move to 10.8.x.

  Good bye

• Do I need a dedicated video card to run a Setup dual monitor with HP 700-327c?

  Recently replaced an old HP Desktop with the envy of 700 running Windows 7 Professional.

  Old facility had a Setup to dual monitor with a video card that had two monitors - one HDMI and a DVI connectors.  The standard connectors on the old PC were VGA and DVI, but both have been capped to prevent use.

  I wanted to set up monitors on this new PC to do the same thing and wanted to know if a video card with the two input connectors dedicated was the best set-up or simply use a mute adapter for VGA or DVI on the new PC ports.  The new PC has two video connectors standard - one VGA and one DVI currently.

  FYI: Using an Intel i7-4770 with 16 GB of RAM and a video card using an Intel HD Graphics 4600.

  An update as promised - not a problem - used another cord with the right connector and setting up monitors using Windows device settings and they work perfectly.  No need for a separate or higher video card as I am not in the game application for video features.  Thanks BH.

• OfficeJet 8720: Re-run the Setup Wizard on HP OfficeJet 8720

  I can't connect to my wireless printer.  When I press the wireless button, a message appears that says: "this feature has been disabled.  Contact the person who set up the printer.  Unfortunately, it's me and I want to rerun the Setup Wizard to start the installation.  How is that possible?  Thank you.

  Hi @204650863,

  Thanks for dropping by the HP's Support Forums! I see that you do not want to reconnect to your HP Officejet 8720 to your wireless network. When you try to do that, you get a message that the feature has been disabled.

  You should be able to do this by restoring the network defaults in the front panel. Follow the steps below:

  Icon Wireless > Wireless menu > restore default network values > Yes

  I also noticed that you use the Mac OS X 10.6, in order to install the printer you need to install a Mac printer driver using Apple Software Update

  Click on the link above to start. What are the results? You are now able to access the control panel and connect the printer to your network?

  I'll watch for your reply. If you want to say thanks for my effort to help, click on the "Thumbs up" to give me a "Bravo".

• I can't get out of safe mode when starting, and can not run the Setup program from windows XP in safe mode. Any ideas?

  can't get out of SafeMode to start

  Hi Retodelta,

  Thanks for posting. Try the following steps. Warning: the following may make your computer unbootable. Please make sure that you have a backup before performing the steps.
  
  Click Start
  Go to the Run
  Type "msconfig".
  Press ENTER.

  In this window, select the Boot.ini tab.
  In this window uncheck the option "/ SafeBoot".

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't get out of safe mode when starting, and can not run the Setup program from windows XP in safe mode.

  I have a XP box that would only start in safe mode.  I needed to repair windows, so I started updating reinstall option but to reboot it says it cannot run in safe mode then it tries to boot into normal mode but crashes - which is what I am tring to solve.  Now I'm stuck because the computer is now making a loop and I'm stuck.  There is no available recovery console, it shows just the installation restart then goes into the shot.  If I try to launch safe mode, that it says cannot run update in safe mode then restarts in normal mode, which hangs then.  I'm stuck.  Boy the days where I wish I could just make the prompt C:\.  Thank you.

  You can connect your problematic hard drive to another PC to copy your important data, using a device such as:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002

  or

  http://www.Newegg.com/product/product.aspx?item=N82E16812119244

  I'm still not 100% convinced that you boot from the CD. Your Dell has the option of F12 to select a boot real-time device (as soon as you turn on the PC)? Also, remember that you have to "press any key to boot from the CD" when you see this screen! Of course, during a reboot, you start from the hard drive.

  Even if you did everything by the book, a repair installation could easily 'loop' as you describe. But as long as your hardware is healthy, a clean install is done.

• desktop computer impossible to load or run E:setup.exe

  a box appears start tat say impossible to load or run type, exe

  Hello

  The tool allows to browse the list of startup programs, I would like to start on the tabs to explore and logon. You will probably see it as ad with a file not found. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Why the process of installing XP mode continually fails when I try to run the Setup program for the first time?

  I have a new desktop computer with windows 7 Professional.  I downloaded Microsoft's XP mode.  Whenever we start the installation, it will fail at the last step of the installation process.  Several times we ran the installation program.  We tried to re-download the software.  Always the same result.  Setup has failed.  Any suggestions?

  -Temporarily disable your anti-virus utility.

  -Also, make sure you install Windows Virtual PC before installing Windows XP mode.

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• Missing required support files, asking the user to run the Setup program or save the installer?

  Hello

  I installed the client vsphere 5.5 on my win 2008 machine, whenever I try to access an ESXi host he wants me to RUN or save the installation program? Can you enlighten me on why this occurs and what is the solution for it? Please find the picture as an attachment.

  The vSphere Client version you need (you can have several different versions, installed at the same time) depends on the version of ESXi host. If the "Launcher" application does not detect the required version, it is trying to download.

  André

• Old version persists after you run the Setup program

  I downloaded the installer of flash (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and installed it successfully, but when I checked the version of the plugin on my browser (firefox-> tools-> addons-> tab plugin) it still shows the old version "Shockwave Flash 10.0.45.2".  I also visited this page http://www.adobe.com/software/flash/about/ and it also show my version as 10.0.45.2.  Restart of firefox makes no difference.

  I've already doubled checked that the version of the installer is 10.1.53.64.  Could someone help me please?  Thank you very much.

  I'm using firefox 3.6.3, Vista.

  Http://kb2.adobe.com/cps/141/tn_14157.html uninstaller to remove all versions of Flash Player.

  Download the 10.1.53.64 http://www.adobe.com/products/flashplayer/fp_distribution3.html Installer

  Make sure that none of the browsers are running when you run the installer & uninstaller.