Run servlet as soon as the application is online

Similar Questions

• The message I get is Microsoft word has not been installed for the current user. Please run set up to install the application. I reinstalled the software, but get the same message.

  The message I get is Microsoft word has not been installed for the current user.   Please run set up to install the application.   I reinstalled the software, but get the same message.

  Hello
  
  See the methods listed in the articles below and check.
  You receive an error "Microsoft has not been installed for the current user" message when you try to start an Office 2003 program or an Office XP program for the first time
  http://support.Microsoft.com/kb/898512
   
  You receive a message "Microsoft has not been installed for the current user" when you start an Office XP program or start of Microsoft Office Maintenance mode
  http://support.Microsoft.com/kb/298022
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• LabVIEW run engine time included in the application exe

  Hi all

  Back in LabVIEW 5, we could create a single LabVIEW application exe file that included the execution engine (all in a single exe file). Now, we must install the runtime engine in its own right + the LabVIEW application exe. I don't think that someone knows a way to create LabVIEW application exe files which include the execution engine in new versions of LabVIEW.

  I know that we can install the runtime automatically during the installation of the LabVIEW application.

  I know also it makes more sense to have the execution time separate from the application of updates etc, but in some cases its nice just have a program obviously installed on the system - the application of interest.

  Any soloutions neat known?

  -Martin

  The time of applications from a single file is long gone. The current LabVIEW runtime engine is a great combination of many files, including DLLs, interface model files user etc. It is not always necessary, but even the most trivial LabVIEW application today takes several tens of these files at startup even. That's how things have changed, and although there are indeed efforts to get apps to run from one place to put them on a USB key for example, LabVIEW is not really a system that lends itself to this. In LabVIEW 7.1 and 8.0, you could include virtually all of the files that make up the runtime system in the same folder as your executable file, no NOR never argued that neither they will probably move to make. With some trial and error, you can start deleting files and see if your app still worked then, but it's a tricky procedure since the application could often start very well, but suddenly encounter display problems if you have opened a subscreen or something with this subject-specific objects.

  You can probably try to simply copy all the files from the LabVIEW Runtime folder in your executable file and there is a chance that it still works, but what for? The size of the facility remains basically the same and if you happen to install both applications on the same computer, each contains a copy of all of the runtime system, so there is no gain more but in fact a setback.

  The interdependencies of these modules are complicated and some need additional components and registry settings to work properly. By offering a way to configure individually that you want to include, and what would be a total pita for the end user that nobody would really understand what is needed for what and why. Experience would be so especially try it doesn't work once, and never use it again.

  I never thought to look into this latest version of LabVIEW. Time to figure it all out is simply average too much punishment for the small gains you get. Installers are the norm these days.

  Another issue that followed, is that you need to monitor all the Security Advisory reports NOR and other bugfixes and act on them yourself whenever a component that you have added in your application must be updated. As it is now, the NI Updater can and will update the plant installed according to enforcement system and all is well.

• Cannot run Quicken 2010, error message: the application failed to start because its side-by-side configuration is incorrect

  Original title: the application failed to start because its side-by-side configuration is incorrect

  I use Quicken 2010 for a couple of years, and suddenly it stopped working with the error in the subject line. I uninstalled the program completely,
  re-installed and got the same error. (I am running Windows 7 64 bit and help Quicken was not particularly cooperative.) So, at the suggestion of someone, I ran a SxSTrace and got the following report, which I find incomprehensible. If it points me to a solution, maybe someone could help me with it:

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x86)\Quicken\qw.exe
  AssemblyDirectory = C:\Program Files (x 86) \Quicken\
  Application configuration file =
  -----------------
  INFO: Parsing manifest file C:\Program Files (x86)\Quicken\qw.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC90.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8"
  INFO: Reference: Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8"
  INFO: Resolving reference Microsoft.VC90.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT\9.0.21022.8__1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_f480bfaef65491a5.manifest
  NEWS: Policy redirected assembly version Editor.
  INFO: The Post policy assembly identity it is Microsoft.VC90.CRT, processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.30729.6161".
  INFO: Start the detection of assembly.
  NEWS: Try to detect manifest to C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57.manifest.
  INFO: Manifest found at C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57.manifest.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC90.CRT.mui, language = "*", processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.30729.6161".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en-US_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en-US_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.MFC\9.0.21022.8__1fc8b3b9a1e18e3b\Microsoft.VC90.MFC.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.mfc_1fc8b3b9a1e18e3b_9.0.30729.1_none_7dd1e0ebd6590e0b.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Good news! After removing and reinstalling the software appropriate to Visual C++.
  Quicken is again functional and, even better, after all uninstalls and installs the last days, my connection to my Bank to download transactions is still in place.
  Thank you

• The initial launch of DW CC 2014, get following error: "cannot locate the resource file in the Configuration folder. This file is Spectialized to run Dreamweaver. Please reinstall the application. "This app has been updated through CC.

  I have to first remove the DW? With the help of PC Win 7.

  The error message: "Unable to locate the resource file in the Configuration folder", so it seems that something is missing. Could be a permission problem... I would suggest:

  1. go to a user admin account

  Connect using built in Administrator | Create the local admin account. 7, 8, Windows Vista

  Install or run Adobe applications in the new user account. Mac OS X

  2 remove the application DW CC 2014 by uninstalling or using the cleantool.

  https://helpx.Adobe.com/creative-cloud/help/install-apps.html#uninstall apps

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  3. manually delete the directories of config according to KB: (you need to of course search the CC 2014 folder instead of the older versions in the KB)

  Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6

  This step will ensure that also the configuration file will be regenerated on re installation!

  4 reinstall on the new admin account and test again. If works please go back to the old account and test again.

  Good luck!

• Unable to run .exe files - windows for the application to launch guests

  When I try to launch a .exe, or .cmd file, Windows prompts you to wonder what application should I use to start the program. This happens on a single user profile on the machine, not the others. How can I fix this profile?

  Background:
  My child has apparently infected the computer. Whenever I started IE, two things happened:
  1. I have tons of warning messages that the computer has been infected
  2. I had the Vista "you want to run...?" question for the c:\users\tanya\app data\local\av.exe file

  I disconnected and logged on as an account administrator and then deleted the av.exe file. I have connected as a user infected, launched IE. Guests at the stop, but now I'm invited by Windows to how launch (apparently part of the java runtime) ssvagent.exe - since everything that I try to launch with a .exe or .cmd, or .com extension gives me a quick for applications to launch in. I suspect that the virus, the installation itself, not connected all the stuff.

  Then... How to hang it to the top? Advice?

  Hello

  Difficulties for Vista file association:
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Be sure to run once connected on the userprofile problem. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Cannot remove from the applications folder

  Having a problem of deletion of any application in the Applications folder. I use El Capitan 10.11.6.

  If I try and drag any application to the trash or command + DELETE, I get the message 'the point 'whatever' cannot be moved to the trash, because some of its extensions are in use.

  I can delete if I use Option + command + DELETE and enter my password.

  So far I have tried:

  Restart

  First aid in disk utility

  But even in the recovery mode

  Repair of permissions through terminal

  Verified that the application is in fact all running processes

  Content of the application open and plugins will be removed.

  Any ideas?

  Exactly what app (s) you want to delete?

  FWIW, any application installed with the operating system should not be deleted.

  Some third-party applications must be uninstalled from their own uninstall program.

• "Application cannot be started. Contact the application provider' but I have the right software and hardware.

  Windows 8.1

  THAT IS TO SAY 11

  XPS 8700

  Get several times, "Application cannot be started.  Contact the application provider.  I recorded and also tried to open it from the site.  I always run as administrator.

  The application is malware or is not certified WHQL.  64-bit versions of windows DO NOT ALLOW any application or driver or hardware to run or install if they are not certified WHQL.

  This is not the dell software and not supported here.

• I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) during the installation of iTunes and QuickTime on my laptop.

  I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) when installing iTunes and QuickTime on my laptop (Windows 7, 64-bit operating system).  Tried to change the registry key to make sure that I had (full control) in the registry key main (HKEY_local_machine\software) and all of its subkeys (including \Wow6432Node and \Microsoft) and restarted my PC.  But I still get the same error message.  What Miss me?

  ORiginal title: HKEY_local_machine32\software\microsoft\windows\currentversion\run

  I tried all the advice support online from Apple without success.  Then I called Apple support and they want to charge me a fixed fee of $19.95 to Troubleshoot modifying registry keys with me.  I refused, and this is why I post this question on the Microsoft Forum.

  Did you follow this advice?

  "Did you download and save iTunes on the desktop > then right click > select run as administrator to install.

  And do you have displayed in iTunes community that is free to do?

  Ask the question in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

• Failure of the application to run on 8300

  Hello

  When I try to run my application on 8300 I get and teliing error that my application tries to access secure API.

  I use the following APIs

  net.rim.device.api.system.PersistentObject;
  net.rim.device.api.system.PersistentStore;
  net.rim.device.api.util.Persistable;

  I tried also sign the application with the key and I get the following message:

  no signature not required .

  I joined the jde to netbeans. I convert the jar in cod and then try to connect to the .cod file. Is it possible to sign the jar file directly.

  Can anyone help me please with this. Its kinda urgent.

  Thanking you,

  Concerning

  S.A.Norton Stanley

  You can solve this thread and set up a new thread...

  See you soon...

• Install the ear of Console - cannot run the application.

  JDeveloper 12 c 32bits.

  I'm checking my ear is produced correctly by deploying the console of weblogic (which is really just the integrated environment).

  The installation says it works great... but I can't launch the web page by using the same URL I used the deployment of Jdeveloper.

  I was capable of that test applications with little (with security). But the Application that I just spent a month of work on is a failure!

  Some features:

  The ADF security is on.  I have an application role, two users, and set up a same business role.

  users are granted to the role of the company.

  The role of the App is given to the role of the company

  Each workflow task and web pages are granted to the role of an application.

  WebLogic is configured with users and the role (which both correspond to users and the enterpise role in the security of the adf).

  The screen 'set up the Security deployment.

  Checked the weblogic application update. XML with the following parameters

  Application enabled policies

  Uncehcked credentials

  Groups and users not controlled

  Unchecked Auto generate and synchronize Weblogic JDBC descriptors during deployment

  Can I deploy on Jdeveloper to Weblogic Server the Integrated and it works.

  Connect the output: I get this when deploying Jdeveloper (it works) and when I install the ear to Weblogic (installation works, but I can not run the application).

  < 25 November 2015 14:54:52 this > < WARNING > < Application customer > < BEA-2162200 > < no hand-class defined in the Java Module manifest file: empty.jar. This module will be treated as a utility JAR and subsequent initialization steps will be skipped. >

  < 25 November 2015 14:54:55 this > < WARNING > < oracle.jps.credstore > < JPS-01033 > < cannot set credentials. The oracle.security.jps.service.credstore.CredentialAlreadyExistsException pattern: JPS-01007: identification with the card AISMainMenu-4131 and anonymous #ERPD key information already existing... >

  < 25 November 2015 14:54:55 this > < WARNING > < oracle.jps.upgrade > < JPS-06003 > < cannot migrate the information to key/identification of the AISMainMenu-4131/anonymous file #ERPD. The oracle.security.jps.service.credstore.CredentialAlreadyExistsException pattern: JPS-01007: identification with the card AISMainMenu-4131 and anonymous #ERPD key information already existing... >

  < 25 November 2015 14:54:57 this > < WARNING > < HTTP > < BEA-101384 > < WLServlet annotation is deprecated, use instead servlet 3.0 annotation. App:AISMainMenu@AISMenu, Class: oracle.adfinternal.view.faces.activedata.AdsServlet >

  I can deploy from Jdeveloper, but if I have a deployment on the built-in console (an ear file) of weblogic server, I can not run the application.

  I get the wrong URL?  It should be the same as the deployment of Jdeveloper on the integrated server.

  Thank you

  Stuart

  This is the error

  Error 404 - not found

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.4.5 404 not found Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.

  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address

  Timo, Dario,

  I finally got to work.  I fiddled around so much with her, I don't know exactly what fixed - or a combination of two settings.

  Thank you very much for your help!

  Stuart

• ORA-00942 when you run the application after import

  APEX 4.1.1
  
  Hello
  
  I transferred my request via import/export to our production database. I had no errors during installation, but when I run the application, I get the following error message.
  

  User not found
  ORA-00942: table or view does not exist
  
  Technical Info (only visible for developers)
  
      is_internal_error: true
      ora_sqlcode: -942
      ora_sqlerrm: ORA-00942: table or view does not exist
      component.type: APEX_APPLICATION_COMPUTATIONS
      component.id: 3102806535980644
      component.name: LANG
      error_backtrace:
  
      ORA-06512: at "SYS.DBMS_SYS_SQL", line 1325
      ORA-06512: at "SYS.WWV_DBMS_SQL", line 1287
      ORA-06512: at "SYS.WWV_DBMS_SQL", line 1358
      ORA-06512: at "SYS.WWV_DBMS_SQL", line 1375
      ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 776
      ORA-06512: at "APEX_040100.WWV_FLOW", line 4155

  I don't know, where to look for the error. I do not have an application element with the name of LANG and there is a calculation application for LANG:

  SELECT  LANG_CODE
  FROM    GPS_WEB_USERS
  WHERE user_name = upper('&APP_USER.')

  All advice where to look?
  
  Published by: Anne-Marie Rosa on August 16, 2012 05:37
  
  Published by: Anne-Marie Rosa 16 August 2012 06:32

  Hello
  >
  I transferred my request via import/export to our production database. I had no errors during installation, but when I run the application, I get the following error message.

  User not found
  ORA-00942: table or view does not exist
  
  Technical Info (only visible for developers)
  
  is_internal_error: true
  ora_sqlcode: -942
  ora_sqlerrm: ORA-00942: table or view does not exist
  component.type: APEX_APPLICATION_COMPUTATIONS
  component.id: 3102806535980644
  component.name: LANG
  error_backtrace:
  
  ORA-06512: at "SYS.DBMS_SYS_SQL", line 1325
  ORA-06512: at "SYS.WWV_DBMS_SQL", line 1287
  ORA-06512: at "SYS.WWV_DBMS_SQL", line 1358
  ORA-06512: at "SYS.WWV_DBMS_SQL", line 1375
  ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 776
  ORA-06512: at "APEX_040100.WWV_FLOW", line 4155
  

  I don't know, where to look for the error. I do not have an application element with the name of LANG and there is a calculation application for LANG:

  SELECT LANG_CODE
  FROM GPS_WEB_USERS
  WHERE user_name = upper('&APP_USER.')
  

  The source of the error is ora_sqlerrm: ORA-00942: table or view does not exist

  Search for the name of the calculation Application in APEX_APPLICATION_COMPUTATIONS APEX view using component.id: 3102806535980644 to find his name.

  Once you have the name, you can change this App mockup and understand what Table/view is not available.

  See you soon,.

  PS: {code} is the tag, which is tiny.

  Published by: Dominique 16 August 2012 18:01

• Login page not coming up when I run the application!

  Hi all
  
  ORACLE 11G, 3.1.2 APEX
  
  I'll have an application with multiple pages and have the login page too. I use the account database as the logon mechanism. When I run the application, my login page is not coming sound directly to come with an application page that the user gets in once the connection is successfully.
  
  Can I know why the login page does not come on the screen when I run the application!
  
  
  
  Pls let me know as soon as possible!
  
  
  Thank you/kumar
  
  Edited by: kumar73 may 18, 2010 09:00
  
  Edited by: kumar73 may 18, 2010 09:29
  
  Edited by: kumar73 may 18, 2010 09:29

  Looks like all your pages have authentication value "Page is Public. Change them to 'Page requires authentication' with the exception of the login page.

• Error: The application cannot be run your security settings have blocked a self-signed application to run.

  I tried to save a certificate for digital signature on www.incometaxindiaefiling.gov.in.
  When the site was asked to run the applet Java JRE7, which I have allowed.
  But then the small window appears with the following message;

  Application blocked for security reasons
  Cannot run the Application.
  Name: StoreCertificate
  Location: http://incometaxindiaefiling.gov.in
  Reason: Your security settings have blocked a self-signed application to run

                  [  OK  ]       [   More Information...   ]
  

  Hello darshan_3101, this message is not firefox but the java plugin - please refer to the documentation of oracle on the topic: http://www.java.com/en/download/help/appsecuritydialogs.xml

• Not able to initialize the application security... Tried to rename cert8.db and secmod.db. Profile has access r/w. Always get the message. Can be run as an administrator

  Could not initialize the safety component of the application. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see incorrect application behavior when you access security features.

  Above the messa4bite error occurs whenever I have stars Firefox without admin priv. Checked the directory of the profile listed to solve problems of information - is r/w for system, admin and homes tried to rename cert8 and secmod as suggested following a forum. Problem persists. \
  My computer is running Win 7 Home Premium 64-bit

  New profile worked! Thank you.