Failure of the application to run on 8300

Similar Questions

• Determine whether the application is running

  Hello

  I'm developing an application that will provide a background thread that calls a UIApplication.

  Is there anyway that I can determine this background thread if the UIApplication is already running?

  I tried to use Application.isAlive or isForeground, but I don't have this UIApplication instance in the background thread.

  In short, can anyone suggest how to determine whether the application is running from outside the application? (excuse the sentence wrong-box )

  Thanks in advance

  Bell

  Why do you not use DURATION for this store. Take a look at this article from BB that does something similar.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800783/How_To _...

  Kind regards

  yosoh

• How do I close the application currently running on the Tablet BlackBerry® Simulator.

  I'm new to blackberry Tablet

  I wasn't able to close the application and come to the home screen to check the new application.

  When I reboot and then I can able to see the home screen

  Can someone help me to go to the home screen when the application is running.

  Try to drag the mouse to the top of the bevel down/down (make sure that you start bevel).

  Once the application has been reduced in the center of the main screen you can drag it again to close it.

  . H

• I am connected but cannot find the application to run

  I lost the application to run photoshop and Lightroom, please can you tell me who to solve

  You use the versions of creative cloud?

  If so, please install Adobe Creative Cloud Office here if you haven't already.

  Creative office cloud app

  Then, you can use the desktop creative cloud app to install applications.

  Using creative cloud | Download, install, update or uninstall applications

  If they are already installed but does not like subscriber:

  Sign in and check your account indicates the subscription with your Adobe ID: https://www.adobe.com/account.html

  Then sign out and back in creative cloud with the same Adobe ID: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  You can also make reference to: FAQ: how to launch Creative Cloud Apps

• ThinApped application requiring a mounted network drive and get "Unable to connect to the sharedDbLibrary" when the application is running on W7 and the drive is mounted

  We have an application that needs to have a specific network drive, mounted with a the letter I:\. This support allows the application to access some of the files that must be available for the application to run.

  If the I: drive is not mounted then the application will not work and you get the following message if displays the runtime "Impossible to connect to the sharedDbLibrary.".

  We have the application on an XPSP3 box thinapped and everything works fine as long as the drive is mounted.

  The ultimate goal is to have the application thinapp running on a workstation of W7.

  We have mounted drive I:\ on a post of W7 and ran the thinapp app by making the same error message that allows us to obtain under XP as drive I:\ was not mounted "impossible to connect to the sharedDbLibrary".

  We checked that the drive I:\ is accessible and we also validated that the path is good. We were able to reproduce the problem in a Windows 2008 box, as well on the other hand the thinapp works fine on a Windows 2003 operating system.

  So basically with the drive I:\ mounted on XP and Windows 2003 the app big short thinapp. With the same drive I:\ mounted on W7 and W2008 application does not run and we get the same message that allows us to get on WXP and W2k3 when drive I:\ was not mounted and the app couldn't find the mapped drive.

  Anyone know how to start to solve this problem?

  Have you had a look at this blog post? http://blogs.VMware.com/ThinApp/2011/04/making-Windows-XP-only-apps-run-on-Windows-7.html

  It might help you to add necessary dll and get the app runs on Win7.

• can to redeploy us an application without having any failure to the application

  Hi all
  
  Please clear my doubt, there seems to be a stupid question. But he asked in one interview.
  
  Is it possible to transfer an application with having a failure to the application on the weblogic Server?
  
  If I want to transfer any war or ear file, I must first cancel the deployment of the server and deploy again the same. But once I have cancel the deployment of the server application will be a failure. I don't want that to happen.
  
  And don't forget that the failover is not accepted.
  
  When I think about it, that I had an idea how it can be possible if tells us the application in another server admin while a server admin does the redeployment process. This means that the same cluster failover.
  
  First of all, is it possible to have 2 admin server in a cluster? In this case, we can define what server must be active. We have two servers admin in our project, but the other server failover comes into picture only when the primary Management Server is facing down.
  
  Please let me know if im not clear enough

  Hello

  Is it possible to transfer an application with having a failure to the application on the weblogic Server?
  
  Yes, it's possible--but the technique is called * "Hot deployment" or "Redeployment of Production" or "Versioning."
  
  Here is a full demonstration and an example for this:
  http://jaysensharma.WordPress.com/2009/12/24/production-redeployment-WebLogic-versioning/

• toggle is plotted on a graph when the application is running

  Hello

  I'm trying to figure out how to make a graph that allows the user to select which elements are drawn when the application runs.  I want all data to appear on the same graph with the same x and axis of ordinates and maybe some checked boxes or something to allow easily what items are displayed.

  Thank you

  Gary

  1... don't use two nodes in separate property for the PLOT VISIBLE and Act implementation CHART.  If you do that, you don't know who runs first, - they are independent.  Use a single property node (stretch it to include two properties).  The top property must be ACTPLOT, 2nd one, be VISIBLE TRACE.  In this way, it is guaranteed to run in the order you need.

  2 you are the cluster of box check ONCE at the beginning of the program of reading and using the same value each time.  You want to read the cluster when the CHANGE occurs, EVENT that is, in the case of the EVENT.  You can read the terminal, or read the NEW VALUE property for the event, so be it is OK.  But you have to read the new value, not the old one.

  3... you also read your buttons ONCE at the beginning of the program, and re - trace the same value whenever you draw. You need to know when you need to draw and THEN read them and lead the chart.

  4... If you set the timeout to, say, 100 mSec, in the TIMEOUT case, read the buttons and drive the graph, then you will have a living picture that updates approximately every 100 milliseconds.  Implement #1 and #2, and you can turn on and outside plots.

  I say "Roughly" because of the way the timeout works - if you wait 99 mSec and then click on a checkbox, the wins Manager check box and the timer 100mSec STARTS OVER when you get to the next iteration.

  If you want the table to day exactly every 100 msec and then use time separate loop, with a WAIT TIL NEXT MSEC MULTIPLE.  Do the waiting, read buttons, drive chart and repeat.  A separate loop will not be disturbed by events in the loop of the user interface.

• defective module: kernelbase.dll when the application is run as a normal user

  Hello

  I'm trying to run a software under Windows 7 32 bit and it crashes when I run. However, it works fine when run as an administrator.

  In case the Viewer, I get the following information:

  The failing application name: ClientNT.exe, version: 1.30.0.780, time stamp: 0x4c052597

  Name of the failed module: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdaae

  Exception code: 0xe06d7363 fault offset: 0 x 00009617

  ID of the process failed: 0xedc

  Start time of application vulnerabilities: 0x01cb01a1f7e77942

  The failing application path: C:\xxxxxx\Programs\ClientNT.exe

  Path of the failing module: C:\Windows\system32\KERNELBASE.dll

  Report ID: 36018391-6d95-11df-8e27-001999672c6b

  This could be the cause of this problem? Why the short application fine when run as an administrator?

  Thanks in advance,

  Polys

  PS. I apologize for not being able to provide the name of the application.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for applications in development on MSDN. Please post your question in the MSDN forum.

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Worm 16.09.20 document is automatically closed after the scroll and zoom text output but the application is running

  IPad 2 (IOS 9.3.5), Adobe, 16.09.20, Document version is slowed after the scroll and zoom text output and then automatically closed, it jumps to the main menu, but application is running (in multitasking mode). This behavior was not in the previous version. I tried to reinstall the IOS on IPad, but no change.

  Thanks for any help

  Hi jakubh25891777,

  Acrobat Reader 16.09.21 is now available in the App Store.

  It should solve the frequent accidents that you have experienced.

  Please try it and let us know if it works for you.

  We apologize for the inconvenience.

• Intercept requests when the application is running

  Hello
  
  I use jdeveloper 11.1.2.3.0
  
  I would like to know how I could catch the queries that are run when the application is in use.
  I would like to see on the DB queries and also queries that are run in memory.
  
  Thank you!

  Hello

  This is the simplest solution to this:

  http://hasamali.blogspot.de/2011/05/ADF-BC-debugging-and-printing-runtime.html

  Frank

• Can I change the schema of the application when running?

  I created a workspace with 3 schema (for example three different customers).
  
  What software (starting with one of this scheme of three).
  
  I would like to know if it is possible to choose (by code) during execution of the schema to be associated with the application.
  
  Thanks in advance to all.
  
  Francesco Galante

  Try again with

  "ALTER SESSION SET CURRENT_SCHEMA [MY_SCHEMA]"on a logon after treatment. "

  Otherwise, you can create 3 different home page in 3 different applications that directly call the 4 'hand' app where the business logic in.
  Usually 1 app by schema.

  Search

• Should all of the application still run?

  We have a great (line 100) query that is used to detect bad data. The query looks like
  
  Select * from table where
  
  Clause1 is true - for example, the arguments start_date is null
  OR clause2 is true - End_date is null
  OR clause3 is true - start_year < 1970
  .
  . 100 other clauses
  .
  
  It seems to me that each clause is evaluated for each row, even if the first clause that evaluates to true is enough to select the line. I think that each article is evaluated because we often receive failures in the function toDate() for null columns and there is no checks before calling toDate().
  
  Is it possible to make the evaluation of query end "beginning"?
  
  Thanks for any help or advice,
  -= Philippe

  Hello

  As Justin said, Oracle will leave evaluate your WHERE clause as soon as it detects a condition is TRUE. If you have proof that it evaluates a condition even if a prior condition is TRUE, then it must be to evaluate the conditions in a different order. Make sure you have up-to-date statistics and appropriate indexes, so that the optimizer can make smart choices about what conditions to evaluate first.

  You can force the order by conditions in a CASE statement.
  For example, do you now this:

  select  *
  from    table_x
  where   start_date is null
     OR   end_date is null
     OR   start_year < 1970
  ;
  

  If you know that the third condition (start_year< 1970)="" is="" the="" most="" restrictive,="" and="" therefore="" you="" want="" to="" make="" sure="" it="" is="" done="" first,="" then="" you="" can="" re-write="" the="" query="" like="">

  select  *
  from    table_x
  where   CASE
              WHEN  start_year < 1970   THEN 1
              WHEN  start_date is null  THEN 1
              WHEN  end_date is null    THEN 1
                                        ELSE 0
          END = 1
  ;
  

• How can I correct the failure of the Click-to-run configuration?

  I have a laptop HP Pavilion g4. Today, I tried to open Microsoft Office Word Starter and got a "Click-2-Run configuration failed" error message and it wouldn't let me enter Microsoft Office Word Starter. I tried it with Excel starter and got the same result. I tried to restore to previous versions, and it still doesn't work. Before this started, I uninstalled some programs that have been recently installed. I need Microsoft Office Word Starter for school so I hope it helps someone find a solution to the problem. Thank you.

  Hello

  Click-2-Run would create a Mobile Office (Word and Excel) for you, but somehow it is corrupt. Please follow the instructions below to fix:

  http://support.Microsoft.com/kb/822005

  Kind regards.

• I want Halo 2 for work___Live games on Windows failed to initialize. Maybe it's because an another Live Gaming on windows (such as Halo 2 dedicated server) the application is running on the computer.

  I have halo 2 and Windows 7 people play halo 2 with windows 7, so it should work. I installed several times trying to run I run as admin that has't worked, I still get the same error I need help on how to make it work

  Abbalyer,
  Take a look at this post in the forum for Games for Windows .  It seems that it covers the exact error you see.  Let us know if having some helpful information. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to find whether the application is running or not?

  Hi guys,.

  I have 2 requests name such as appln1 and appln2

  First I started the appln1 manually (not launched from lettering to the other... here may be getting correct status) then

  I started the appln2 manually, it must get the current state, if appln1 is running or not?

  But it still gives appln1 AI is not running.

  It is poosible to get the current state of the appln2 to the appln1.

  If it is please let me know.

  Thanks in advance.

  Take a look at this thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=1112&query.ID=984...

  Concerning

  Bika