Run the defragmentation at the next startup tool

Similar Questions

• How the * can I get rid of Yahoo search - Firefox still refuses my changes at the next startup.

  Work in Win10.
  Firefox refuses to keep the changes I made to remove Yahoo.
  Remove all browsers except Google - next time you start it again Yahoo!
  No other browser has been replaced, with the exception of Yahoo.

  It's very 'big brother', which I don't expect Firefox.

  After spending hours fighting it, I'm at the "tip" of let - pun.

  It seems you might have a bit of malicious software on this PC. I see an extension named Hub of results which is known as bearer of Malware.
  Why don't you see if removing "garbage" that gets rid of your problem with Yahoo search 'come back' at the next startup, which is a symptom of Malware.
  http://malwaretips.com/blogs/ads-by-see-results-hub-removal/

  When finished remove that, please install this extension - https://addons.mozilla.org/en-US/firefox/addon/searchreset/ - as a final step to get some reset preferences to default values. Note - that extension will run during installation and then disappear.

• my search in the section startup tool has been removed. How can I restore this tool?

  my search in the section startup tool has been removed. How can I restore this tool?

  Hello

  You don't mean that the search option is missing from the start menu?

  If so, then the following steps may be useful.

  If not, then please provide us with more specific information on the issue. This could help us help you better.

  1 click-right on the taskbar > properties
  2. click on Start menu tab
  3. click on next to the start menu properties
  4. click on advanced
  5. scroll down until you find 'research' (down)
  6. make sure that it is checked.
  7. click on OK.

• SFC.exe find corrupted system file and confirms the determination of repair at the next startup. but are still present after running sfc scannow new windows 8

  I run sfc/scannow;  results. resource protection finds files corrupted and managed to fix it. System file repair changes will take effect after the next reboot. but after the restart without change, I run sfc/scannow and files are always corrupt

  system not finish booting and stuck at halfway. Also the programs would not open. I had installed some drivers from the Asus download site. before it began. so I uninstalled it, but no help, then I ran the SFC scan who gave me the message about corrupted files, I ran a system restore and everything works although now I have same re installed all the updates except some Akami download which was also offered on the Asus downloads thanks. for your quick response

• Code error message 193 when I try to run the Vista startup program.

  I've been running this program for months, but now it will not work.  It calls for an error code 193. and CreateProcess failed.  I deleted the program and reloaded from 3 different sources but without success.  It doesn't work if I boot in safe mode.

  Hello

  ·         You did changes to the computer before the show?

  ·         On what program you are faced with the question?

  Method 1: If the program works well in safe mode, then I suggest you put the computer to boot and search for the driver/software of third party conflicts:

  http://support.Microsoft.com/kb/929135

  Note: Configure the computer to normal startup by following step 7 from the link above.

  Method 2: Run the SFC scan and check if it solves the problem:

  http://support.Microsoft.com/kb/929833

• Run the fix it tool error center "Troubleshooting cannot continue because an error has occurred."

  Original title: run fix it tool center

  When I download a Microsoft fix it center tools I get following error message when I try to run the program after downloading

  TROUBLESHOOTING CANNOT CONTINUE BECAUSE AN ERROR OCCURRED SAID WERE SORRY, BUT THE PROGRAM HAS ENCOUNTERED AN ERROR TRYING TO CONNECT TO THE SEREVER 8007273DJ CODE

  Hi Dave,.

  Please send this query to Microsoft Fix it Center Forums. The forum is used to post those on the Microsoft Fix it Center automated troubleshooting tool.

  http://social.Microsoft.com/forums/is/fixitcenter/threads

• How to run the built-in tools for audit & correcting allocation due to reticulate files os errors?

  I ran defrag Paragon & it says "error due to reticulate files file system allocation R - OS built in Proofing Tools & fix this error."  Where can I find the built-in tools to fix this error?

  Hello

  as you use a 3rd party defrag program ask for their support on the problems that arise with it

  http://www.Paragon-Software.com/home/total-defrag/

• White screen when you run the pc diagnostic tool

  Hello
  When I run diagnostic pc screen tool is white and I do not see records or whatever it is in the field. I can press select all and run, but the test is finished in less than 2 seconds?
  Has it disappeared? How can I get that back?
  Thank you people.

  Hey Buddy,

  Perhaps, you should remove all the stuff of toshiba and reinstall the latest version of the software. Better would be to backup all your data to some media (DVD, USB - HDD) and recover your machine.
  The error should be gone after reinstalling your windows using the recovery cd.

  Please give some feedback

  Welcome them

• How to find a way to open and run the Microsoft Windows tool remover malware?

  I downloaded it from microsoft, they give no instructions to use it.. ??? HELP AS SOON AS POSSIBLE PLEASE

  Double click on the download save or right click on it, then "Run as Admin" > next > next > what type of analysis you want to make your choice:

  1. quick Scan

  2 full Scan (may take several hours)

  3. Custom Scan

  Then do the scan.

  See you soon.

• How to run the application startup script before the start of telnet (inetd)

  Hello
  
  I need to run my application startup script before the beginning of Telnet users on the server. At the present time, the script is at /etc/rc2.d/S98startup which is not useful.
  
  Thanks in advance...
  
  Published by: user4027740 on April 7, 2012 12:41

  I am inclined to ask 'why', but I refrain...

  The problem you'll have is that 'telnet' (really inetd) will be started by SMF and your app startup is a legacy script. I don't know of anyway to you allows to map addictive SMF one departure inherited. The only solution is to write a start of SMF for your application and do inetd:default require your application to be online before you start.

• Previous tabs lost at the next startup, since the last update

  Since the update to Firefox 33.1 (and/or from the update of Windows 7 in the week of the Nov.11.2014), Firefox will not keep tabs on my previous session. I have (and always have) my option set to load the pages since the previous session, but even when I set it to something else and then return that even once, it will load only my home page tabs when I restart Firefox. It is extremely annoying, because I like to leave tabs open to go back and read articles or anything else, so I lost some things now that I tried to allude to.

  Everyone knows about this problem? I don't remember having this problem before the latest updates of Firefox or Windows 7.

  FOR INFO. Firefox updated to 33.1.1 and this problem has been resolved. He even remembered all my tabs from the time when the problem started.

• When you run the script via VMware tools when power changed, some commands in script (as a copy) has failed.

  I came across a very strange question. I tried to create some custom vmware scripting tools, such as a new .bat file. This file contains a large number of orders, mostly as copy command "copy file://\\192.168.172.5\abc.exe c:\. ». I set this file as a custom script for Script event - power on guest operating system. Everything goes well with the bat file when I tested it. But after that I changed the State of power to power on, all other commands work fine except the copy commands in the bat file. Why? How can I make it work? Of course the problem of network. And that makes me very confused.

  Hello

  First copy the files on local disk was OK.

  If this works for local disk, but not to a network drive, then hit you indeed a permissions issue any.

  But if I run the script with tools VMware service script, the commands of copy (of the remote shared folder) failed while other controls worked well. I'm quite confused.

  In fact, it is easily explained. The VMware tools service (Yes, it's a service) runs under the account Local system and by default, the local system account has no access to the network for security reasons. You can change the user of the service runs under and see if that solves your problem (very likely)

  To do this, go to computer management (right-click icon desktop, select 'Manage') and open Services and Applications, service page, locate the VMware Tools service in the list. Select properties, log on to the page tabs and change account at your own Local System account. Restart the service and it should work.

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• Run the error code DLL C:\PROGRA~2\MYWEBS~1\bar\1.bin\M3PLUGIN. DLL

  I think that this error is related to my PlugandPlay Windows, but I can't figure out how to fix it.  I have not seen this particular error appearing on the lists of any forum.

  Hello

  You really don't want MyWebSearch toolbar as it has malware that are associated with him.

  M3PLUGIN. DLL, information
  http://www.bleepingcomputer.com/startups/m3plugin.dll-23933.html

  How to get rid of the Mywebsearch toolbar
  http://www.ehow.com/how_4780067_rid-MyWebSearch-toolbar.html

  Products Fun Web "My Web search" removal Instructions and help
  http://www.pchell.com/support/MyWebSearch.shtml

  -------------------------------------------------------------

  To ensure that his party and IE and system are clean:

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE

  IE - tools - manage Addons (for sure disable SSV2 if she's here, is no longer necessary, but)
  Java always install it and it causes problems - you never update Java to go back in and turn it off again.)
  Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look
  right. Allowed are usually OK and "unauthorized" are not always bad. If a doubt
  program to ask about it here.

  Could be a free - BHOremover - BHO - standalone program, needs no installation, download and
  run - not all are bad but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows Update - if necessary, you can
  Download it here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Malicious removal tool from Microsoft
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  also install Prevx

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I can't run the desk top of page icons exe files,

  I think that I down loaded a bug in a prog 'windows allways open maximally'
  I need is when I installed ie8 NOTHING that I would keep to the max.
  If you can help please keep things simple!

  Hello

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.
  Following message shows how to restore the .exe function after removing the malware.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now), then
  Double-click it and run it like this. You can rename it back later. Do the same with others
  programs as needed. Use this method for other necessary - DO NOT ASSUMER one
  program removes all or that there is no other malware.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  There are MANY varieties of these with many names, but all can be eliminated with the same methods:
  
  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove all THE varieties of this malware - please read carefully the removal Instructions.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
  in the regular when windows you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
  UnHackMe execution)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/   <-- information="">
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I tried several times to set up an email account with Thunderbird, but the next time I start the computer and start Thunderbird, no account is displayed.

  I bought a new desktop PC with Win 8.1 and installed Firefox and Thunderbird.
  Then, I tried to set up the e-mail account manually (in IMAP) following the instructions here: https://support-en.upc-cablecom.ch/app/answers/detail/a_id/22 , but can't set the mail server outgoing smtp correctly (I could receive mail but not send them). Subsequently, I deleted this account. Then, I started the automatic mail with UPC Cablecom under the http://www.upc-cablecom.ch/content/dam/www-upc-cablecom-ch/Support/executables/upc-cablecom-email-assistant.exe link tool and he did successfully set up the account, however, because a POP3 server account. As I was not happy with it, I deleted the server of incoming POP3 mail (and lost the e-mails received, of course...) and retried a manual installation. In doing so, I got an e-mail account IMAP incoming more two outgoing SMTP server (comparing them, I also understand the configuration error that I had done the first time). I then deleted the manual as SMTP server the automatically the installation server worked correctly.
  In this context, accepting them and sending E-mail worked OK. However, the next time I started the computer, the e-mail account disappeared and Thunderbird was asked to set up a new account again. I have successfully set up manually once more, but the same problem resurfaced at the next startup, the e-mail account was gone...!

  Thank you in advance for your help!
  Maxonce

  Verify which profile is used.

  AppMenu button - help - troubleshooting - profile directory - Open Directory information

  Your profile folder should open in Windows Explorer. What is the location of the profile?

  Restart your computer and repeat the steps above. The profile folder has changed?