run the UTL_FILE package

declare

utl_file.file_type F1.
Start

F1: is UTL_FILE.fopen ('UTL1', 'example1.txt', 'w');.

UTL_FILE.put_line (F1, 'hello');
UTL_FILE.put_line (F1, 'welcome');
UTL_FILE.put_line (f1, "this is the example to use utl_file package system");
end;

After the execution of this file is created with the specified name in the specified location.
but the text is not inserted into the file.
What is the reason and how can I solve this problem?

You forgot to fclose

Tags: Database

Similar Questions

PLS-00201 when you run the dbms_compression package
Hello

I am collecting estimates compression rates in a 10 g database before upgrading us to 11 g. I downloaded the package compression of DBMS of OTN: http://www.oracle.com/technetwork/database/options/compression/compression-advisor-095705.html

And this installed in my db 10g:
SQL > @dbmscomp.sql

Package created.

The synonym is created.

Grant succeeded.

No errors.
SQL > @prvtcomp.plb

Package body created.

The synonym is created.

Grant succeeded.

No errors.

When I try to run run this package as described in the README file, I get the following error:

SQL > exec dbms_compression.getratio ('SAPAPO', ' / SAPAPO/MATLOC ', 'OLTP', 10);
BEGIN dbms_compression.getratio ('SAPAPO', ' / SAPAPO/MATLOC ', 'OLTP', 10); END;

*
ERROR on line 1:
ORA-06550: line 1, column 7:
PLS-00201: identifier ' DBMS_COMPRESSION. GETRATIO' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored

Please let me know if anyone has come across this error before.

Thank you
The package is called dbms_comp_advisor, not dbms_compression.

How to write a procedure to call and run the custom package backend
Hi all

Oracle 10g
Oracle Apps R12

I work with here oracle order management, we have a package called (Pick Release) to customize. Due to a problem, we have this concurrent program execution manually giving Route_id as parameter. The route_id comes from the road to the Table. By using this query

Select distinct route@DB_LINK_APPS_TO_ROADSHOW route_id
When trunc (route_date) = trunc (sysdate + 2).

on a daily basis, we have almost 42 routes and we run this simultaneous program manually close times.

so now how to write a procedure for this

Step 1 make the route to the routing table. (By cursor we can get the route_id accordingly)

Step 2 How to trigger custom backend package and run accordingly to this output of the cursor (route_id)

If 40 routes of cursor get is - that the simultaneous program runs 40 times according to this route_id.

can some could provide the steps to do this

Thanks and greetings

Srikkanth.M
To submit a competing request from the back - end:

FND_REQUEST. SUBMIT_REQUEST (Client or server)

Summary

function FND_REQUEST. SUBMIT_REQUEST

(application IN varchar2 default NULL,

program IN varchar2 NULL by default,

Description IN varchar2 default NULL,

start_time IN varchar2 default NULL,

sub_request IN default boolean FALSE

Argument1,

argument2,..., argument99.

Return to argument100 number);

Description

Submits a competing treatment by a simultaneous Manager. If the query is successful, this function returns the ID of the concurrent request; Otherwise, it returns 0.

ATTENTION: FND_REQUEST needs to know information about the user and accountability whose application is submitted. Therefore, this feature works of concurrent programs or forms within the Oracle Applications.

The FND_REQUEST. SUBMIT_REQUEST function returns the ID of the concurrent application after successfully. It is up to the caller to issue a commit to complete the application.

Your code should retrieve and handle the error message generated if there is a problem of presentation (the ID of the concurrent request returned is 0). Use FND_MESSAGE. RETRIEVE and FND_MESSAGE. ERROR to retrieve and display the error (if the application is made on the client side).

Related essays: overview of the Message dictionary (see page)

You must call FND_REQUEST. SET_MODE before calling FND_REQUEST. SUBMIT_REQUEST of a database trigger.

If FND_REQUEST. SUBMIT_REQUEST fails to go anywhere but a database trigger, database changes are cancelled until the time of the function call.

After a call to the FND_REQUEST. SUBMIT_REQUEST function, installation of all parameters are reset to their default values.

Arguments (input)

short name of the application associated with the concurrent request for enforcement.
short simultaneous program (not the executable) name of the program for which the application must be made.
Description Description of the application that appears in the form of concurrent requests (optional).
start_time time during which demand is expected to start running in the (optional) HH24 or HH24:MI:SS format.
sub_request set to TRUE if the request is made by another application and should be treated as a subquery.
From version 11, this parameter can be used if you submit requests for in a concurrent program of PL/SQL stored procedure.
argument1... 100 arguments for the concurrent request; up to 100 arguments are allowed. If the Oracle Forms submitted, you must specify all arguments of 100.

Help about the utl_file package
Hi all
I'm new on utl_file

I created a directory

Create directory LOGDIR AS 'G:\logdir\ '.

My dbuser with DBA privileges.

Here is my code
```
DECLARE

vDATA  VARCHAR2(4000);

 vInHandle  utl_file.file_type;

 BEGIN

  vInHandle := utl_file.fopen('LOGDIR', 'TEST.TXT', 'R');

 UTL_FILE.GET_LINE(vInHandle,vDATA,256);

  

dbms_output.put_line(vDATA);

   

END ;





but when i run this code it gives me 



Error on line 0

DECLARE

vDATA  VARCHAR2(4000);

 vInHandle  utl_file.file_type;

 vOutHandle ut



ORA-29283: invalid file operation

ORA-06512: at "SYS.UTL_FILE", line 475

ORA-29283: invalid file operation

ORA-06512: at line 6
```
Please help me
This error indicates usually that there is a problem, see the file. Either the directory on the operating system permissions are incorrect for oracle to be able to see the file or the file does not exist or, if you are using a unix database server then the file names will be case-sensitive. I assume that your oracle server is not unix that you have specified a windows style path in your directory. (You obviously realize that UTL_FILE can only access the database server file system and local client filesystems not?)

Having a problem to recognize the file using the utl_file package...
Hello

I use utl_file utility to read the CSV file, utl_file.fopen function is useed to open the file. The fopen function has three input parameters, the second parameter is the name of the file. My problem is that I need to read file on a daily basis. The file name will be like:-DDMMYYYYHHMISS. Last six characters are for the hour minute second generational file. If the name has only DDMMYYYY then I can give the name of file as TO_CHAR(SYADATE,'DDMMYYYY'), for an individual the same date throughout the day. But the hours, minutes and seconds will be time when the file is generated, it can be different for different days. In this case how can I normalize the value for the filename parameter in the function fopen.

Thanks in advance.
Similar to the jeenesh solution:
```
declare
 fexists boolean;
 fname varchar2(20) := to_char(trunc(sysdate),'DDMMRRRR');
 ......
begin
 . ...
   for i in 1..24*3600 loop
     utl_file.fgetattr(location,filename || to_char(to_date(i-1,'sssss'),'HHMISS'),fexists,file_length,block_size);
     if fexists then fname = fname || to_char(to_date(i-1,'sssss'),'HHMISS'); exit; end
  end loop;
.... --- now you can open the file with above found filename

end;
/
```

Hi I need to read the data in vaiables local file delimited using the utl_file package «»

Hi all
I want to read data from a .csv file which is ',' delimited in a local variable that is different from a plsql stored procedure so that I can insert into the table.
I use this way to read data...
--------------------------------------------------------------------------------
-get the position of ',' (comma) in csv file
--------------------------------------------------------------------------------
l_c1: = INSTR (l_in_file, ',', 1, 1);
l_c2: = INSTR (l_in_file, ',', 1, 2);
l_c3: = INSTR (l_in_file, ',', 1, 3);
l_c4: = INSTR (l_in_file, ',', 1, 4);
l_c5: = INSTR (l_in_file, ',', 1, 5);
l_c6: = INSTR (l_in_file, ',', 1, 6);
l_c7: = INSTR (l_in_file, ',', 1, 7);
l_c8: = INSTR (l_in_file, ',', 1, 8);
l_c9: = INSTR (l_in_file, ',', 1, 9);
l_c10: = INSTR (l_in_file, ',', 1, 10);
--------------------------------------------------------------------------------
-pull data into local variables
--------------------------------------------------------------------------------
l_0003: = SUBSTR (l_in_file, l_c2 + 1, l_c3-(l_c2 + 1));
l_0004: = SUBSTR (l_in_file, l_c3 + 1, l_c4-(l_c3 + 1));
l_0005: = SUBSTR (l_in_file, l_c4 + 1, l_c5-(l_c4 + 1));
l_0006: = SUBSTR (l_in_file, l_c5 + 1, l_c6-(l_c5 + 1));
l_0007: = SUBSTR (l_in_file, l_c6 + 1, l_c7-(l_c6 + 1));
l_0007: = To_Char (To_Date (l_bdate_0007, "mm/dd/yyyy '"), 'yyyy-mm-dd');
l_0008: = SUBSTR (l_in_file, l_c7 + 1, l_c8-(l_c7 + 1));
l_0009: = SUBSTR (l_in_file, l_c8 + 1, l_c9-(l_c8 + 1));
l_0016: = SUBSTR (l_in_file, l_c9 + 1, l_c10-(l_c9 + 1));
l_0016: = To_Char (To_Date (l_eff_dt_0016, "mm/dd/yyyy '"), 'yyyy-mm-dd');
I need to find an alternative way to reduce the length of the Code.
Any Suggestion please!

Hello

Please see the query below...

SELECT RTRIM (REGEXP_SUBSTR ('John, 100, Manager, 26000', ' [^,] *,', 1, 1), ',') AS part_1

, RTRIM (REGEXP_SUBSTR ('John, 100, Manager, 26000', ' [^,] *,', 1, 2), ',') AS part_2

, RTRIM (REGEXP_SUBSTR ('John, 100, Manager, 26000', ' [^,] *,', 1, 3), ',') AS part_3

, LTRIM (REGEXP_SUBSTR ('John, 100, Manager, 26000', ', [^,] *', 1, 3), ',') AS part_4

DOUBLE;

Get the filename with utl_file package

Hello

I'm running on oracle version 10.2.0.3.0.
Are there opportunities scan the oracle Center and get all the file names in plsql table using the utl_file package?

Thank you!

Cann't do you with UTL_file, you use java or other external language. as

create or replace type List as table of   varchar2(255);
/

create or replace and compile java source named "FileList"
as
import java.io.*;
import java.sql.*;
import oracle.sql.*;
import oracle.jdbc.driver.*;

public class FileList
{
   public static ARRAY getList(String directory) throws SQLException
   {
       File path = new File( directory );
       Connection conn =
             new OracleDriver().defaultConnection();
       ArrayDescriptor descriptor =
         ArrayDescriptor.createDescriptor( "LIST", conn );
       return new ARRAY( descriptor, conn, path.list() );
   }
}
/

CREATE OR REPLACE FUNCTION  GETFILES_FUN( DIR_PATH_V VARCHAR2)   return List
AS language java name 'FileList.getList(java.lang.String )
          return oracle.sql.ARRAY.ARRAY';
/  

select *     from TABLE ( cast (GETFILES_FUN( 'c:\\' ) as List) );

Concerning
Singh

Improved LabVIEW 8 to 2013 and VI asked now to find the installation package for Run-Time Engine 7.0

I recently installed LabVIEW 2013 on a computer (running Windows XP 32-bit). The machine has also of LabVIEW 8 is installed, which is what I used before the upgrade. I opened a VI has been created in LV8 and then saved it and all its subVIs in LV2013. Now when I open the VI in LV2013 and try to run it, a window opens asking me to find the installation package 'lvruntimeeng.msi' for LabVIEW Run-Time Engine 7.0. If I cancel this dialog box, and the subsequent message, indicating that the installion files were not, the VI appears (at least of the initial inspection) to function normally.

I have closed LabVIEW, downloaded Run-Time Engine 7.0 on the site of NOR and tried to install it, but I received a message saying that it is already installed (as I had suspected). How can I determine what part of the VI and/or its subVIs tries to make use of Run-Time Engine 7.0? If not, how can I get LabVIEW to use instead the Run-Time Engine 2013 that was installed when I upgraded to LabVIEW 2013?

Bob_Schor wrote:

You run your VI of a project? If so, you can watch the dependencies and get an idea of what live "in charge", you might have. There may be "something old" in your code in LabVIEW 8, which was replaced in 2013, but ' plane still around "-If you can identify it, you can probably replace it with its"more modern"equivalent

If you do not have the VI in a project, you can simply open LabVIEW, create a blank project and add your first level VI. If all of your relevant screws are in a single folder, add the entire folder. Now look in the dependencies.

BS

Yes, I run the VI from within a project of LV. After some more research in the knowledge base OR I could solve the problem by using the following procedure:

1. use the measurement and Automation Explorer to uninstall Run-Time Engine 7.0

2. restart the PC

3. open the project, close the project by choosing "save all".

4. restart the PC

5 reinstall the Run-Time Engine 7.0 using a file downloaded from ni.com

6. restart the PC

7. open the project, close the project by choosing "save all".

8. open the project and run the VI. No more messages on LabVIEW, trying to find the Run-Time Engine 7.0.

When I tried to run the sample App "Weather" on ripple Packager for OS 7.0 Bb I got the error

When I tried to run the sample App "Weather" on ripple Packager for OS 7.0 Bb I got the error

Oh, Snap! Build request failed with the message: [ERROR] feature is not found in any extension (blackberry.ui.Spinner)

What should be done to avoid the mistake and build/package for the web app and run it on the device?

You need install the SpinnerControl extension.

See "Dependencies" sample weather README on Github:

https://github.com/BlackBerry/WebWorks-samples/tree/master/weather

I have 2 separate servers, 2 databases running with 2 packages of the apex. Can I merge them all on a single server/database?

Hello.
Currently I have two servers each with an oracle database, each of them is running apex and offers a package that people use to interact with data through Web pages.
I want to merge these two servers into one to save on costs, which means that 1 Server 1 database... with 2 packets of the apex. Is this possible? I guess I would need to export/import the whole package and to migrate database schema, but I will say a default package a schema and a single default package to another scheme? I don't understand workspaces so maybe that's where the question is rooted.

Hi Daniel Jakes.

Daniel Jakes wrote:

Currently I have two servers each with an oracle database, each of them is running apex and offers a package that people use to interact with data through Web pages.

I want to merge these two servers into one to save on costs, which means that 1 Server 1 database... with 2 packets of the apex. Is this possible? I guess I would need to export/import the whole package and to migrate database schema, but I will say a default package a schema and a single default package to another scheme? I don't understand workspaces so maybe that's where the question is rooted.

APEX applications are similar/different?

You can do the following:
- Import the schema (data) of base2 in database1.
- You can associate multiple schemas to a workspace. For example, you can associate the schema imported into your workspace (in database1).
Reference: https://docs.oracle.com/cd/E59726_01/doc.50/e39151/adm_mg_wrkspc.htm#BABCEBIE
- Then, you can export the APEX of base2 workspace application and import this request to the workspace from base1.
- Access the newly imported application. Change the attributes of the Application -> Security-> database Session and define the Schema of the analysis to the newly imported schema.
Kind regards

Kiran

Run the package to a different schema

Hi all
I have a very strange (at least for me) problem with a package to run in the production environment.
The package has been installed in the application schema and in the same schema for all tables that are in the same table.
The customer reported a slowdown in the performance of it, but if I test it in my PR env and:
-If I run the application outside of the package, it run very fast
-If I install the package in my personal schema and run it, it run very fast
-If I run the package, installed on the application's schema, is very slow!
What is the difference between these three methods?
Thank you in advance,
Diego

91ca5e2c-8db6-4563-9e70-c98e10acf2ad wrote:

OK, to start my procedure I used Notepad anonym in plsqldeveloper:

Start

Appuser.pkgapp.prcursors (vcode =>: vcode, pcursor =>: pcursor);

end;

when I try to get the cursor, with plsqldeveloper, I have different response time for:

-package in my user-> very fast

-package to the user of the application-> very slow

OK - but that the above code does not recover. All this shows is a call to the procedure who, do you think, does that open the cursor.

Once a cursor is opened the procedure who opened it has NO control over it. Only the session making the recovery is involved as is an Oracle process on the backend. But the procedure/package is NOT involved.

If the location of the package does NOT affect actual recovery, but it can affect the execution plan used when the cursor is opened first.

New - when you say "run the code" you tell fetch data? Or are you talking about just open the cursor as the example above shows?

Display actual execution plan - get it from a trace file, if you need to.

other things to say is that the number of lines to get out are some ten years.

The question is always this THAT IS SLOW? It is the RECOVERY of these lines "a few ten at most? Or is it just open the cursor so that you can begin to pick up?

You need to SHOW US (just tell us):

1. WHAT you do

2. HOW you do

3. WHAT results you get

4. WHAT results you expect to get

dbms_job. Submit not run the package

Hi all
We have just updated the oracle 10g to 12 c
Select * from version $ v
--==============================================================
12 c Oracle database Release 12.1.0.1.0 - 64 bit Production 0
PL/SQL Release 12.1.0.1.0 - Production 0
CORE 12.1.0.1.0 Production 0
AMT for 64-bit Windows: Version 12.1.0.1.0 - Production 0
NLSRTL Version 12.1.0.1.0 - Production 0
--================================================================
declare
a directory;
l_procedure_to_run varchar2 (100): =.
' app_boxes_cust. RunInterface (100,14141, "cust_rel.txt", "c:\Files\cust_rel_exp", 972); " ;
date of p_date_to_run: = TO_DATE (' November 20, 2014 ', ' dd/mm/yyyy ');
Start
dbms_job. Submit (a, l_procedure_to_run, p_date_to_run);
commit;
end;
The dbms_job.submit generates job_id but it does not run the package.
--=========================================================================
Select broken, failures to dba_jobs where job = 63;
broken = ' don't
Chess = NULL.
Please your HELP
Thanks in advance,
Naama

Check next_date when he intended to run.

Check job_queue_processes parameter.

Check if the Scheduler is disabled.

When I run Adobe Cloud Packager I get the message: Foutcode: A12E1

When I run Adobe Cloud Packager I get the message: Foutcode: A12E1
I tried all the possible solutions of Adobe, but they do not work.
I get the message when the program downloaded Creative Cloud Packager try to settle.

Network problems can prevent the verification of installers downloaded during the installation process.
1. When this error occurs, leave it on the screen (by clicking on the cancel button will remove the downloaded files).
2. Navigate to C:\Users\[User name] \App Data\Local and find a folder of application that is installed. For example, if you try to install the creative cloud Packer, look for a folder named "Creative cloud packer."
3. Copy this folder and paste it in another location or at the same place with a name change.
4. You can now click on the Cancel button, this will remove the original download.
5. Open the copy of the folder you just created and run the Setup.exe file to install the application.

4EA2 'RUN' is grayed out in the contextual menu for the SYS package

I am running in a database of Oracle 11 g Enterprise Edition Release 11.2.0.3.0 - Production of 64-bit environment.
I use the version of SQL Developer release Early Adopter 2 4.
SQL Developer 3.2, while it is connected to a specfic scheme, it was possible in the Connections window, expand the menu item from other users, so the SYS menu item, then the PACKAGES menu item and select a package, and using the context menu 'run '. ' Run PL/SQL ' window would appear, and I could enter the appropriate settings and run a procedure in this package. I think in particular of the DBMS_ERRLOG package.
In 4EA2, following the same path, the command "Run", well visible, is grayed out. The combination of keys "Ctrl + F10" alternative works. Please restore the "Run" command in the active state (not greyed out) in the context menu.

Hi wine,

Perhaps the scenario you describe is the same as a bug fixed for EA3:

Bug 17601294 - LOW PRIV USER CANNOT RUN the PACKAGE IN the SCHEMA STRANGER WITH EXECUTE PRIV

A small detail of the test case it (nothing mentioned about Ctrl-F10, however):

1. create user ONLY CONNECT, RESOURCES, SELECT_CATALOG_ROLE. 2 Grant EXECUTE on a package in another schema. 3. navigate to the package in the tree view. 4 run/run button is disabled.

5. but this scenario works as expected in v3.2

This close is enough?

Kind regards

Gary

SQL development team

How to run the packaged procedure with Ref Cursor

Hello.
The question may be very simple for you... but I was confused how to run
I have the following package

CREATE OR REPLACE PACKAGE CURSPKG AS 
    TYPE T_CURSOR IS REF CURSOR; 
    PROCEDURE OPEN_ONE_CURSOR (N_EMPNO IN NUMBER, 
                               IO_CURSOR IN OUT T_CURSOR); 
    
END CURSPKG;
/ 


CREATE OR REPLACE PACKAGE BODY CURSPKG AS
    PROCEDURE OPEN_ONE_CURSOR (N_EMPNO IN NUMBER,
                               IO_CURSOR IN OUT T_CURSOR)
    IS 
        V_CURSOR T_CURSOR; 
    BEGIN 
        IF N_EMPNO <> 0 
        THEN
             OPEN V_CURSOR FOR 
             SELECT EMP.EMPNO, EMP.ENAME, DEPT.DEPTNO, DEPT.DNAME 
                  FROM EMP, DEPT 
                  WHERE EMP.DEPTNO = DEPT.DEPTNO 
                  AND EMP.EMPNO = N_EMPNO;

        ELSE 
             OPEN V_CURSOR FOR 
             SELECT EMP.EMPNO, EMP.ENAME, DEPT.DEPTNO, DEPT.DNAME 
                  FROM EMP, DEPT 
                  WHERE EMP.DEPTNO = DEPT.DEPTNO;

        END IF;
        IO_CURSOR := V_CURSOR; 
    END OPEN_ONE_CURSOR; 

    
END CURSPKG;
/

But I want to test (run) this procedure...
But confused how to have Ref Cursor
Could you help me in this...

Thank you

You must declare a variable of type T_CURSOR and pass it to the procedure like this.

declare
  lOutCursor CURSPKG.T_CURSOR;
begin
  CURSPKG.OPEN_ONE_CURSOR(, lOutCursor);
end;

run the UTL_FILE package

Similar Questions

Maybe you are looking for