Run the vCO as a different user
Hello
is it possible/plug to run the vCenter Orchestrator Service not supported as SYSTEM account, but as a different user (Administrator)?
If Yes, is this account that is also used for system calls in workflows (execute commands, for example)?
See you soon,.
Joerg
According to vCenter Orchestrator documentation, to run and use Orchestrator, you must use a local system account for the computer on which is installed Orchestrator.
See this link (page 19): http://www.vmware.com/pdf/vco_410_install_config_guide.pdf
Best wishes / Saludos
-
Tags: VMware
Similar Questions
-
How many user take RDP at the same time with different user login ID in Server R2 2012
How many user take RDP at the same time with different user login ID in Server R2 2012?
How many user take RDP at the same time with different user login ID in Server 2008 R2?
How many user take RDP at the same time with different user login ID in Server 2012 starndard?
How many user take RDP at the same time with different user login ID in Server 2008 standard?
This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
Run the Workflow as a specific user
Hello world
My English is not great, so I'm sorry for the typos, I'll do.
I have a little problem with the management of rights in vCenter Orchestrator. I just created a new environment Orchestrator. I created the workflow a bit like for example to stop or restart virtual machines. My problem is that I don't want all users to be able to manage each VMs. To realize that I need configure the Orchestrator to use a single session per user. Then I set the permissions on the server vCenter Server. Which works very well.
Know that I created another workflow that clone of an existing virtual machine. But as the Orchestrator uses a single session per user, vCO users do not have sufficient rights to clone a virtual machine. This is because I would like to run the cloning-workflow to run as another user. I already discovered "credentials of change" - Action, but know the users do not have sufficient rights to change credentials. I won't give them administrator rights, at least until they are able to change the workflow by using the Orchestrator Client.
So I tried to restrict access using Client Orchestrator. But this also seems to be impossible without denying web access. Now I'm stuck. Is there any solution for this?
Thank you very much.
OK, I just did the test on my side so I understand better what is happening.
It seems that the admin should be just defined the workflow approval and each parent to the root of the change. It's admin roles give the right to create / modify / delete.
I think it's the same situation that you are experiencing.
A work around would be to use the firewall block the vCO for different hosts data port that the server of vCO and maybe your admin workstation.
Maybe another would be to program an original workflow workflow (to test, it can work as system).
-
Run the package to a different schema
Hi all
I have a very strange (at least for me) problem with a package to run in the production environment.
The package has been installed in the application schema and in the same schema for all tables that are in the same table.
The customer reported a slowdown in the performance of it, but if I test it in my PR env and:
-If I run the application outside of the package, it run very fast
-If I install the package in my personal schema and run it, it run very fast
-If I run the package, installed on the application's schema, is very slow!
What is the difference between these three methods?
Thank you in advance,
Diego
91ca5e2c-8db6-4563-9e70-c98e10acf2ad wrote:
OK, to start my procedure I used Notepad anonym in plsqldeveloper:
Start
Appuser.pkgapp.prcursors (vcode =>: vcode, pcursor =>: pcursor);
end;
when I try to get the cursor, with plsqldeveloper, I have different response time for:
-package in my user-> very fast
-package to the user of the application-> very slow
OK - but that the above code does not recover. All this shows is a call to the procedure who, do you think, does that open the cursor.
Once a cursor is opened the procedure who opened it has NO control over it. Only the session making the recovery is involved as is an Oracle process on the backend. But the procedure/package is NOT involved.
If the location of the package does NOT affect actual recovery, but it can affect the execution plan used when the cursor is opened first.
New - when you say "run the code" you tell fetch data? Or are you talking about just open the cursor as the example above shows?
Display actual execution plan - get it from a trace file, if you need to.
other things to say is that the number of lines to get out are some ten years.
The question is always this THAT IS SLOW? It is the RECOVERY of these lines "a few ten at most? Or is it just open the cursor so that you can begin to pick up?
You need to SHOW US (just tell us):
1. WHAT you do
2. HOW you do
3. WHAT results you get
4. WHAT results you expect to get
-
Two users on the same PC. How to run the application even for two users at the same time?
Hello friends,
I have two user accounts on my pc. Is it possible to run the same application (for example: DEFRAG or disc cleanup utlities) for two users at the same time? I mean, these utlilities work by all of the computer or user account? That would mean the same application to perform for a single user in the background and foreground to the user, or I'm totally lost in space?
Thank you for your comments
You should run Disk Cleanup in each user account. Do not try to shut it down or change user when defragmentation; system files may be damaged. You must stop the defragmentation, log off, restart the defragmentation and don't really no point for it. MS - MVP - Elephant Boy computers - don't panic!
-
Can I run two (connected under 2 different users) reviews on the same box of Windows 7?
For our development system we want to switch between two clients to view, each one connected to our server to view with another user. We opened a session with elevated permissions, program changes, the other logged on with restricted permissions to see how the changes affect the production environment. Is this possible?
Currently we have to disconnect from the view completely Client session and reconnect the server to display with the alternative credentials.
Thanks in advance!
Doug
You can use the option - standalone to launch a second instance of the client view
Sent from my iPhone
-
Problem running the application as a public user process
Hello
I proceeded on request PL - SQL that returns data to fill a selection list on the page with optional values. This process is called with a call from the event on a date object. When authenticated, it returns correctly and when it is called as a public user it fails with this in the XML declaration:
{XML Parsing Error: no element found the location: moz-nullprincipal:{1edfa653-8146-43f8-8ea9-a26d3e29cf8a} line number 1, column 1:
The call should return this:
With the help of this event on the date element:<select> 14-JUN-12 DSKYSTH <option value="Single">Single Rate = $10.00</option> </select>
call this code:onChange="get_AJAX_SELECT_FB(this,'P1_XBASIS');"function get_AJAX_SELECT_FB(pThis,pSelect){ var l_Return = null; var l_Select = html_GetElement(pSelect); var ajaxResult = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=SetBasis',0); ajaxResult.add('P1_ID',$v('P1_TOUR_CODE')); ajaxResult.add('P1_XTD',pThis.value); gReturn = ajaxResult.get('XML'); if(gReturn && l_Select){ var options_Contents = gReturn.getElementsByTagName("option"); l_Count = options_Contents.length; l_Select.length = 0; for(var i=0; i<l_Count;i++){ var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
}
}
get = null;
}
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
}
}When inspecting with Firebug I can only see a difference in the request headers between the public user and authenticated user where the cookie value is -1 on the public user. Public User: *Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8* *Accept-Encoding gzip, deflate* *Accept-Language en-us,en;q=0.5* *Connection keep-alive* *Content-Length 181* *Content-Type application/x-www-form-urlencoded; charset=UTF-8* *Cookie LOGIN_USERNAME_COOKIE=roger; WWV_PUBLIC_SESSION_129=5245818196882971; ORA_WWV_REMEMBER_UN=ROGER:PTX-DEV; ORA_WWV_USER=A29423F6BE2220D0; WWV_CUSTOM-F_969127929331871_129=-1* *Host horta.prot.com.au:8080* *Referer http://horta.prot.com.au:8080/apex/f?p=129:1:547226222832513* *User-Agent Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0* Authenticated user: *Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8* *Accept-Encoding gzip, deflate* *Accept-Language en-us,en;q=0.5* *Connection keep-alive* *Content-Length 182* *Content-Type application/x-www-form-urlencoded; charset=UTF-8* *Cookie LOGIN_USERNAME_COOKIE=roger; ORA_WWV_REMEMBER_UN=ROGER:PTX-DEV; ORA_WWV_USER=A29423F6BE2220D0; WWV_CUSTOM-F_969127929331871_129=A29423F6BE2220D0* *Host horta.prot.com.au:8080* *Referer http://horta.prot.com.au:8080/apex/f?p=129:1:1687129548869672:GET_TYPE:NO::P1_SEARCH_CAT,P1_XTD,P1_ADULT,P1_SEARCH_CODE:CABLE,,,* *User-Agent Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0* I'm it's probably something stupid that I'm doing and hope someone can help Rogeruser4101020 wrote:
Thank you, but my browser crashed and ended up with a double... I see that now, but the question remains unanswered.Close this message and wait for one response on the other.
-
We are running XP and have 3 different user desktop accounts. We are very excited about the features of Firefox4, but one user a lot less comfortable with changes and does not want to lose the comfort of navigation in 3 until it had a chance to get used to using 4. May take a while...
Is it possible to download Firefox 4, perhaps to a new location. Or a new user account. And use that as a "teaching tool" while maintaining the 3?
Or can we move on 4, re-download a version 3 and import previous bookmarks for this user to new 3 download, until we him uncomfortable.
The answer is probably not. But if there is a creative way to do that, without another available computer, that would be great. Otherwise, improve us and deal with the frustration and whining here... 4 is too good to pass up.
Ideas?
LindaWhen you install Firefox 4, choose the custom installation option and change the install location of Firefox. You'll then 2 versions of Firefox are installed.
As you have different user accounts, each user will have its own Firefox profile (location where are stored bookmarks, passwords, etc.). You should not pass between the different versions of Firefox with the same user profile. For those who want to use Firefox 4, make sure that you use a Firefox shortcut that opens Firefox 4, even for one who wants to stay with Firefox 3, just keep their shortened origin of Firefox and it should open the old version.
-
Is it possible to run the command script with user account administrator rights?
Is it possible to run the command script with administrator user account rights means please tell me how to...
I need to run it in windows 7 professional service pack 1.
There are a few myths that won't go away, for example
- You can perform administrative tasks when you are working from a command prompt.
- A script (batch file, VBScript, PowerShell) gives you administrative rights.
There is no substance to a myth. Your account has administrator privileges, or it does not. There is no backdoor.
-
Broken links to the network shared folders by users
Hello
Several people here at my office working on files work InDesign InDesign files with links to the image on a network share file store.
If a person links, the next person to work on the page, on another workstation, but access to the same network, there are all broken links and will have to repeat all - sometimes quite painful if the images are not all in one folder; You must navigate each involved folder and find the file in question.
Rarely, this happened in CS2, but is happening now quite frequently in CS4. What has changed? And why is it so difficult to re - tying things now? It seemed that when we could not link something new in CS2, it gave you a little help. For example if you were re-login to a given file, if you navigated to the appropriate folder, you will find the file already highlighted. No more, it seems.
If something has changed in the way that InDesign maintains links?
How can I avoid that links broken all the time? Is there a quicker way of restoring links?
Thank you
Kurt hoffman
Art Director
Before journal/NYC
Assuming you're on Mac: what you see in the Finder may differ from the actual path of the Unix.
A possible cause is that if you get the same volume of different user accounts, reboot just to fix it.
Another cause is an empty folder in the Volumes folder, delete to fix.
To check, drag the image into the web browser. The URL can show variations in the volume name, as one '-' appearing in annex 1.
You can also take a look at the links, low link info panel. The 'path' value must be enabled.
Dirk
-
How to get the "Run as different user" option using the context Menu
I work with the domain environment and use os win 7 but it do not display "run as user deffrent' so, how get the"Run as a different user"option using the context Menu, share pls burned discription.
(also try pressing shift + right click but nothing else)
Atul Rai
E-mail address is removed from the privacy *.
May be of help to the: http://www.sevenforums.com/tutorials/155532-run-different-user-without-shift-right-click-context-menu.html
-
We use Windows XP and have not had a problem with Internet Explorer.
I suggest you try as different users.
If my answer has solved your problem, please click 'Solved It' next to this response when logged in on the forum.
-
How to mount the afp share with two different users
I use Terminal to mount three actions of my SIN. I want to mount a mount point in my user folder. One of the actions has a user name and password, so that the other two mount as a guest. I can ride through Finder > to connect to the server without any problem, but this goes to /Volumes and not in my user folder and also indicates the actions on my desk. I use to get the following:
mount_afp o nobrowse 'afp://username:password@Servername/Share1' ~/Mount point/folder 1 /.
This example goes up the part properly, but when I run the following command:
mount_afp o nobrowse 'afp://Servername/Share2/' ~/Mount point/folder 2 /.
I have the following error:
mount_afp: AFPMountURL returned error-5023, errno is-5023
This happens if I invert the controls as well, for example to get the comments share first, then the part of the user.
Am I missing something? I can't get different actions for different credentials?
OS X has no Linux - bind option that allows multiple points of Assembly of nickname for the same file system.
OS X allows a file system mounted only once.
I suggest you get the file normally, system create an OS X Alias, can put copies of this Alias in the account of each use.
And/or create symbolic links that point to the real mount point.
-
Run the workflow - vCO 5.1 API
Hi, I have problems running a Workflow using the new VCO 5.1 RESTful API. Ask yourself if you can help.
I'm trying to run a workflow called "HelloAPI", which simply takes an input parameter 'name', which is then printed to the System.log.
I get the error message:
The request sent by the client is syntactically incorrect.
Status code: 400
When you try to run the POST according to the API.
curl - k - user vcoadmin:vcoadmin h ' Content-Type: application / xml ' X - POST d open https:// < vco-Server >: 8281/api/stream/3572df5e-f1ba-4ac4-b7f6-ea3b2cf4bc60/executions/
Open looks like:
<? XML version = "1.0" encoding = "UTF-8"? >" < vco:execution - context xmlns:vco = ' http://www.VMware.com/VCO "xmlns ="vco"> "< vco:parameters >< name vco:parameter = "name" type = "string" description = "' worn 'local' = >"Curl < vco:string > < / vco:string >< / vco:parameter >< / vco:parameters >< / vco:execution - context >Initially, I had problems because of the Type of content, but was able to solve that by sending in the header. For me, this XML file looks like how the execution context should according to the API documentation. Any help would be appreciated.
Thank you
Steve
Hi Steve,.
POST-ment to. .. /workflows/ {identifier} / presentation/instances / creates a new run of presentation which is useful if you want to validate input parameters. If you are sure that they are valid (as in your example) you don't need to start running a presentation; You can directly start the workflow runtime.
As I said in my previous answer, your first attempt was almost correct except the curl command line syntax to specify the request file - it should be
@request.xml d
Thank you
Ilian
-
Run the file on VCO using specific credentials
Hello
I will carry out a batch on the server of VCO by using the following code:com = new Command ("test/Run.cmd");com Execute (true);It works fine = > I followed the guide of the administrator to allow access to the command class.My problem is that I wish that this batch will be executed using specific credentials. I see that the local SYSTEM user runs the command.I tried to:-start a workflow as...-change in workflow-Run the "VMware vCenter Orchestrator Server' service windows using the specified account (Journal as).I would use the API credentials, but I don't really know what to do with it (runas example).Any ideas would be very useful...?In advance, thank you very muchFredHi, Fred!
As far as I know, it is not possible to change the credentials for the local order :-(.
For me, it worked to run vCO-Service as another user (make sure you change it to vCO, not for the Service Configuration of the vCO ;-))
Some references:
http://communities.VMware.com/thread/292083
http://Communities.VMware.com/thread/271425?Start=0&tstart=0 (later in the thread)
http://communities.VMware.com/thread/280865?TSTART=60
Maybe you can change the user somehow inside your external batch file?
Kind regards
Joerg
Maybe you are looking for
-
Hi my sons ipod touch is locked and lost mode. I can't restore it via iTunes. I can see it is no longer on my icloud account. Can anyone help?
-
MBP and Hercules DJ Control Air with El Capitan
My son has this Panel DJ Hercules, which he uses when children have a part here at home. He has used successfully in the past on the MBP with the Mavericks, Yosemite, and he wants to work again with his next birthday. I have not yet found anything it
-
Make the computer unusable for msconfig. Beginner trying to trouble shoot start.
computer would start the start to the top and woul would some programs stop responding? then I tried troubleshooting of systems no, I can't evenconnect to internet. When I proceed with help & support I get this. Windows cannot respond because server
-
No menu 'File', available in Windows Live Mail; not even a taskbar in order
In a previous answer: "then in WLM file-import-Messages-Outlook Express 6 and place you in the folder you all the dbx files to." when I open Windows Live Mail, I don't have the command bar typical with choices or menus as "File",""Edit","View", etc.
-
High CPU in the NT Kernel & System processes / ACPI.sys
Periodically, I notice high CPU usage by the NT on Win7/Pro kernel process. Using Windows performance monitor, the offending subcomponent suggests ACPI. SYS. I also noticed that the problem starts after inserting/help/ejection of a USB key. This is c