MBP and Hercules DJ Control Air with El Capitan

Similar Questions

• The output on my Macbook Pro is not giving me the drop-down list, & happens either in the port of the helmet or digital port and neither one is what I need. I tried turning off the computer and hold "Shift"' Control', 'Option' with the power-o ".

  The output on the sound output box has no drop downs. The audio output suddenly disappeared and when I went to the 'exit' sound in 'sound preferences' the only thing that would show was the headphones.  After that I tried a couple of things suggest that 'Helping Apple', sometimes in digital form & everything that happens you can't change for something else.  Things I've tried suggested by Apple press help were the "Shift control option buttons & button / stop at the same time."  or press the Option, the command, the P & R key as soon as possible after you have pressed the button On.  Hold down until after the second gong during a manoeuvre.   This did cause the digital option, but none of these 2 is the one I need.  Help

  Perhaps, it would be useful to know what that is exactly the one you need. Are get you an external speaker output or anything like that. Also, it would be useful to know the operating system you are using.

• Windows 10 WiFi and Audio does not not with El Capitan

  Ive recently reinstalled windows 10 on my iMac 27 "retina with 3 TB fusion 2015 end stop a disc, the latest version of El Capitan because of a problem with the Wifi and audio work (I thought it was a fault of windows) and after a few days using the new facility did exactly the same thing.

  WiFi drivers seem to be installed but it can't find any Wifi network (despite the fact that she found them perfectly before) and the sound doesn't bring any connected audio device. There is no missing drivers shown in Device Manager, I tried the fix this peripheral option in windows and it did nothing.

  I tried to re-download the bootcamp drivers by opening the wizard boot camp under OSX and when I click on continue on the first screen, I'm greeted by the error message

  The startup disk cannot be partitioned or restored to a single partition.

  The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Boot Camp Assistant to install Windows.

  So I can't create a new usb key to install the drivers again, or even delete the partition to try again.

  Everyone knows this, and if anyone has found a solution? As I said it's the second time this exact same failure so I think its either a hardware fault or a fault in the bootcamp drivers

  Thanks in advance for any help

  Gary

  1. If you have set to automatic updates of Windows, I suggest that disable you. You found no WHQL compatible Apple standard drivers that cause pain.

  2. to download the driver BC6 package, use wizard BC and

  

  3. your installation W10 has been an update to W7 / W8 + or a clean install?

• Nikon is not compatible with El Capitan

  Hello

  I hope someone can help me with this...

  I have a Nikon D3200. I just got a new Macbook Air with El Capitan, and he didn't have problems trying to use the two together.

  I could not install View NX2, who, after some research, I discovered is a common problem with El Capitan. I found links on other threads that led me to download View NX - i and another link to download View NX2. It seems that View NX2 is now installed, but when I connect my Nikon, it is not recognized. In fact, I have another point and shoot Nikon camera and it does not seem to recognize that no more. Problem is that I can not even use Photos as the importer on my Macbook Air because my camera just is not recognized at all.

  Side note: I have connected my D3200 to my old Macbook that runs on Yosemite. View NX2 and Photos seem to work well with the import of images. They both open up when the camera is connected. But I did not have enough space on this laptop to import the pictures anyway...

  On another thread regarding this issue, the user spoke using the Image Capture to import the photos. BUT my camera is not recognized by the Image Capture either...

  I'm not sure this is a Nikon problem, or a problem of iOS with El Capitan compatibility - I foresee contacting me Nikon too.

  Thank you!

  I also have a D3200 and it can connect with the latest versions of NX - i, of Apple's Image Capture (found in Applications),

  Photos (I've disabled this) and Adobe Lightroom.  with the exception of the pictures, they don't open automatically.  It comes

  with 10.11.2 of an end 2013 27 "iMac to start 2011 13" Macbook Pro.

  Select this check box, plug in the camera and then turn it on.  Then in the Apple menu, click about this Mac...

  Then click on the system status button.  On the left side of the box of the report, expand the material (if it isn't already)

  then select USB.  You should see somewhere under the tree of the camera "NIKON DSC D3200".

  

  If this is not the case, there may be a few odd hardware problem.

  That's what I get with transfer of images (nothing to camera when I did):

  

  With Nikon Transfer 2 provided with NX - i:

  

  And just to smile and laugh:

  

  So the connections work, just need to understand why it does not work on your Macbook Air.

  NX2 is borked and will probably never get it fixed because it is replaced by NX - i.

  You must also remove all Nikon software and re-install NX - i.

  Also check the version of the firmware on the camera. Mine are listed as C-> 1.04 and L-> 2.009.

• Transfer files via AirDrop does not not on Mac Pro with El Capitan

  I tried to transfer files between my iPhone and my macbook pro installed with El Capitan 10.11.5 2015 6 / iPad pro. Between the devices of the latter, it works flawlessly, but on the Macbook, it does not. I followed all the suggestions in the forums, delete the file bluetooth.plist etc. However non of these work. I noticed something in the section ' on the Mac / system report / Bluetooth.

  I don't know if it will be useful, but I would have thought that should not be disabled, Airdrop uses Bluetooth technology.

  These services are for the regular BT file transfer, not release.

  They are listed as being disabled on my Mac Pro 2013 too but AirDrop works very well between my iPhone 6 + and Mac.

• CS6 PS & Lightroom 5 Compatible with El Capitan

  Wondering if anyone knows if the above versions are compatible with El Capitan?

  Hi Briant,

  5 Lightroom and Photoshop cs6 are partially compatible with the El captain and no major problems have been reported by users.

  See similar Adobe Photoshop CS6 OS X El Capitan and subjects is lightroom compatible with el capitan 5.7

  Kind regards

  Assani

• 2015 Macbook Air - download speed between 3 Mbps and 100 kbps avg.

  I have a 2 month old Macbook Air El Capitan 10.11.6 running 2015. Since the day I opened the box and connected to the internet, I saw really slow to the Internet until I gave up on streaming audio and video. Connectivity is so bad that pictures on web pages stopped loading.

  I made every difficulty I could find online as well as reminded twice technical support to have them tell me to do things that I've done.

  The last call, I spoke with a supervisor who is convinced that it is my ISP internet despite all the other computers on my home connection and see downloads 10 x higher than my macbook. (40 MB/s to my 3 Mbps), and the fact that I see bad connectivity no matter what network I'm on. Two things, I told the tech support supervisor. I have appointment of Engineering tomorrow where I'll be very interested to hear their ideas and their solutions.

  I have owned 5 5 iPhones, iPads 3, 3 iPods, Macbooks and countless accessories Apple and devices over the past decade. I'm sad to say but my next devices will not be Apple.

  My most current iPhone, which is a year and a half old, is slowly dying as the touch screen loses the changes and external buttons stop working. The two-year mark, it'll be a brick. Just in time for an upgrade of $400!

  Honestly, I'm shocked at how Steve Jobs for this company. I never would have guessed that her crazy quality control and standards have actually been driving Apple light insofar as it goes to the pot, a few years after his death.

  If you have an appointment, they can check the issue.

  If you are disappointed by Apple in general let know here:

  Apple.com/Feedback

  It is a voluntary forum, Apple does not read messages from users here.

• Movies that I own on DVD and I tore and transfer to iTunes appear in my iTunes library on my iMac (El Capitan 10.11.2), and I can sync them with my iPad to watch there, but not in iTunes on my Macbook Air (El Capitan 10.11.2). Why? How?

  Films I own on DVD, and that I ripped and transfer them to iTunes appear in my library in iTunes on my iMac (El Capitan 10.11.2) movies and I can sync them with my iPad to watch here, but they do not appear in my library of films iTunes on my Macbook Air (El Capitan 10.11.2). Why? How can I fix it?

  I don't know why my post says 'Mac OS X (10.7.5) '. All my Macs run El Capitan 10.11.2.

• Problem with iterator and EJB data control

  My project components:

  JDeveloper 12.1.3

  Back end & the intermediate layer, JPA, EJB 3, controls data EJB

  JSF pages simple front end (no fragment), bounded task flow

  Hello

  I have a weird problem with iterators in my project, project using EJB 3 & JPA and EJB data controls

  When the user come to a page (this page is part of a stubborn workflow) and add a record to a table (linked to an iterator) and without saving changes, leave the page (means output delimited task flow)

  do something else and again back to the first page iterator always keep this line is entry and it cause problems in my system

  If I close the browser and come to this page for sure the line is not there

  I expect when the user leaving a stubborn workflow each thing belongs to this workflow should be deleted. Is this true?

  Or someone has the same problem? Any suggestions / or work around?

  Respect of

  Mohsen

  Have you read the link I posted? Have you named the BA a transactional data control?

  When you leave the workflow you issue a rllback and the new line should have disappeared.

  Timo

• Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Copy the contents of the drive in a desktop folder and install from this directory.

• Why can't you have variable conditionalized on template and control them with expressions?

  I have a chapter that is shared between two guides with different titles. On master pages, I inserted the variables for the two titles of books and conditionalized of each variable.

  When I go to the pages of the body, both titles appear in footers. When I apply expressions to control what as I want to appear, they both disappear. The only way of making return must show all.

  Note that the expressions work perfectly with conditional text on the pages of body. Apparenlty that they do not work on master pages. This seems to be a bug, no?

  I withdraw this question: you can have variable conditionalized on master pages and control them with expressions, provided your expressions do not confuse FM. For example, in the chapter, I have this expression:

  "NotInHelp" ANDNOT "hidden" ANDNOT "SalesPM" ANDNOT "HelpOnly" ANDNOT "Report_Caching."

  The first tag condition, NotInHelp, to which we are asking FM to show (the others hid), is the cause of all hide conditionalilzed, even if it worked properly when we tested it in an individual file.

  Remove "NotInHelpAND" solved the problem. Learned something about expressions today. fun!

• Webcam and Whiteboard does not not with Adobe AIR with Adobe Flash Builder

  Hello

  I am trying to build a simple chat using Adobe Flash Builder target service for Office AIR (my final goal is to bring to android). My version of adobe AIR is 2.5.0 and here is my source code:

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:WindowedApplication ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  " xmlns:mx ="library://ns.adobe.com/flex/mx"minWidth ="955"="600"xmlns:rtc = minHeight ' http://ns.Adobe.com/RTC « >

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < rtc:AdobeHSAuthenticator id = "auth" userName = "Yy" protocol = "rtmfp" / >

  < / fx:Declarations >

  " < rtc:ConnectSessionContainer id = authenticator 'session' ="{auth}"roomURL ="https://collaboration.adobelivecycle.com/yytan1987/myfirstroom"width ="100% "height ="100% "> "

  < mx:HBox width = "100%" height = "100%" >

  < mx:VBox width = "25%" height = "100%" >

  < rtc:WebCamera width = "100%" height="50%"/ >

  < rtc:SimpleChat width = "100%" height="50%"/ >

  < / mx:VBox >

  < rtc:SharedWhiteBoard width = "75%" height="100%"/ >

  < / mx:HBox >

  < / rtc:ConnectSessionContainer >

  < / s:WindowedApplication >

  Essentially when it debug with air, the cat works fine, but the webcam and Whiteboard do not work... I don't really know what the problem with it is already... Grateful if someone can help, thanks!

  Concerning

  Hello

  My point is, is your self-promotion set to the room. I mean what

  your user role when a user enters in the room (which is not host), it is 10

  or 50. If its 10 i.e. spectator, while it cannot use his own cam etc. You

  need to take a look at the newspapers when a user types and if its 10 and

  you want to give these permissions, turn on self-promotion of the

  devconsole for the room to do his role 50 which is editor.

  I just now downloaded 2.5.1 AIR and created a new project with your

  source and I am capable of anything.

  Thank you

  Hironmay Basu

• After the last update, the search engine shows a chart containing the symbols of share, recharge and subscribe on my mbp and imac. Please notify.

  After the last update, the search engine shows a chart containing the symbols of share, recharge and subscribe on my mbp and imac. Please notify.

  It is a problem with the extension of the RSS icon (Firefox/tools > Modules > Extensions), so you will have to disable or uninstall this extension until its developer released an update to fix this.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• External screen flickers and snowy with El Capitan

  I have an intermittent problem on a new LG Display.

  LG Display 27MP58 27 "connected to the Macbook Air 11' with El Capitan (10.11.4) flickers and the picture goes snowy. This happens about 10% of the time.

  So to determine if it was the connection, the display or the computer I plugged in the screen of a Macbook Air with Yosemite and it was very stable. This convinced me that el Capitan is the culprit.

  Given that I'm reluctant to downgrade the OS to Yosemite, is there another fix for flickering with El Capitan.

  Thank you

  Hello senorbill2000,

  I understand that you have a problem with an external display connected to your MacBook Air. Have you considered as reinstall OS X Yosemite, but want to discover some additional troubleshooting options before you go down this path. I can help you with that.

  At any time you have problems with the display, I always begin with ensure the connection between the two. Start by reseating the cable and also check that your Mac is up-to-date with it's software. Another thing to try is to reset the SMC and the NVRAM. Take a look at the article below and it will be presented in more detail on what to do when you encounter problems with your external monitor.

  Get help with graphical problems on external displays connected to your Mac.
  https://support.Apple.com/en-us/HT201177

  Take care

• MacBook battery exploded and now does not run with charger

  Recently, I replaced the battery in my MBP and it worked fine for a few weeks then one day, I woke to find the swollen battery and the bulge of the keyboard. I removed the battery and the thought that I would use just the charger as I had done in the past, but the MBP would not turn on and there is no light in the charger when I plug.

  I have a Macbook October 2011 17 "Pro release. I think to repair itself but I was wondering if someone might be able to help me with what could be the problem before I go this route.

  Would it be the charger, or did the battery exploding to destroy it completely. I also noticed that plant in the charger plug is smaller than the others. This can be normal, and I have never noticed before.

  Any help would be appreciated.

  Thank you

  You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple. You can be denied assistance if you did not replace the battery with a battery or certified Apple-made.