Running book HFR - question

Similar Questions

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• HFM - HFR question: number of Page showing not

  Hello

  I'm on HFR 11.1.1.3 version. I created HFR report via the HFR studio and included the < < < card > > > function in the bottom to display the page number. When I run the report in PDF format, the page number is not displayed in the output report.

  Please can you help me solve this problem.

  Thank you

  Michel K

  I've recreated the book and got the page numbers. Thank you.

• Audio books several questions...

  Questions about audio books on 9.2 and OS X 10.11.2 iOS...

  1. What is the file format to allow change och mediaformat of music audiobook in iTunes... I see that MP3 works but not AAC... Why?

  2. is it possible to download own audiobooks to iBooks?

  3. audio books is available on iBooks on iOS and not on OS X?

  Aac files end with .m4b?

• Method of application for process by running several times question

  Hi all

  In my controller code, application of process method is run several times, and insertion of multiple data in the table, any body can help me how to solve this problem.

  I have the code in my application process below:

  OAApplicationModule m = pageContext.getApplicationModule (webBean) (OAApplicationModule);

  am.invokeMethod ("InsertRecord", null);

  OAMessageLovInputBean oalovinputbean = (OAMessageLovInputBean) webBean.findIndexedChildRecursive ("ccustatus");

  oalovinputbean.setValue (pageContext, "INPROGRESS");

  String userName = pageContext.getUserName ();

  System.out.println ("username is:" + username);

  OAMessageTextInputBean pUserId = (OAMessageTextInputBean) webBean.findChildRecursive ("item32");

  pUserId.setValue (pageContext, userName);

  OAMessageTextInputBean pchangedby = (OAMessageTextInputBean) webBean.findChildRecursive ("item34");

  pchangedby.setValue (pageContext, userName);

  If ((("on").) Equals (PageContext.GetParameter ("rrchkbox")))

  {

  String whereclause1 = (String) pageContext.getTransactionValue ("whereclause");

  String workordnum = (String) pageContext.getTransactionValue ("workordnum");

  String rrnum = (String) pageContext.getTransactionValue ("rrnum");

  String ponum = (String) pageContext.getTransactionValue ("ponum");

  System.out.println ("whereclause test1" + whereclause1);

  String status = pageContext.getParameter ("ccustatus");

  System.out.println ("CLEMENT LINE STATUS:" + status);

  Serializable param [] = {workordnum, rrnum, whereclause1, ponum};

  am.invokeMethod ("getSearchData1", param);

  am.invokeMethod ("checkSelectedrow", param);

  Vcnt serializable = am.invokeMethod ("processPOData", param);

  }

  Below the code written in AM:

  Public Sub InsertRecord()

  {

  XXDPECONTAINERVOImpl vo = getXXDPECONTAINERVO1();

  vo.setMaxFetchSize (0);

  Line XXDPECONTAINERVORowImpl = (XXDPECONTAINERVORowImpl) vo.createRow ();

  oracle.jbo.domain.Number empNum = (oracle.jbo.domain.Number) getOADBTransaction () .getSequenceValue ("XXDPE_CONTAIN_SEQ");

  row.setContainerizationId (empNum);

  vo.insertRow (row);

  row.setNewRowState (rank. STATUS_INITIALIZED);

  }

  Please help me.

  Thank you Manu for your answer, my question set, in fact it was I have attached several region in the page controller, so whenever the page load is run 3 times and the call to the insert 3 times, so I corrceted it now is workign fine.

  Thnaks

  Deb

• running of SQL question

  Hi expert,
  
  
  When I ran after SQL, error message reads "table or view does not exist" pointing to the table "dba_tab_cols" and "dba_all_tables". There is no other question for this statement, because if I changed table "user_tab_cols" and "user_all_tables", it works well.
  
  
  declare
  v_old_table DBA_tab_columns.table_name%type;
  v_where Varchar2 (4000);
  Boolean v_first_col: = true;
  type rc is ref cursor;
  c rc;
  v_rowid varchar2 (20);
  Val varchar2 (50): = "Test note";
  
  Start
  for r in)
  Select
  t.*
  Of
  dba_tab_cols t, dba_all_tables a
  where t.table_name = a.table_name
  and t.data_type like '% CHAR % '.
  and a.owner = 'QA'
  order by t.table_name loop)
  
  If v_old_table is null then
  v_old_table: = r.table_name;
  end if;
  
  If v_old_table <>r.table_name then
  v_first_col: = true;
  
  -dbms_output.put_line ('search' | v_old_table);
  
  Open c for ' select rowid from ' ' |. ' v_old_table | '" ' || v_where;
  
  extract the c in v_rowid;
  loop
  When the output c % notfound;
  dbms_output.put_line (' rowid: ' | v_rowid |) "in" | v_old_table);
  extract the c in v_rowid;
  end loop;
  
  v_old_table: = r.table_name;
  end if;
  
  If v_first_col then
  v_where: = 'where ' | r.column_name | "as" %' | Val | '%''';
  v_first_col: = false;
  on the other
  v_where: = v_where | "or" | r.column_name | "as" %' | Val | '%''';
  end if;
  
  end loop;
  end;
  
  
  But if I choose these DBA tables in the toad sql Editor, it works well, I am currently using my own credentials, not the administrator credentials. why he get different effects running in these two ways?
  
  Thank you very much

  >

  Hello

  When I ran after SQL, error message reads "table or view does not exist" pointing to
  Table 'dba_tab_cols' and 'dba_all_tables '. There is no other question for this statement, because

  If I changed table "user_tab_cols" and "user_all_tables", it works well.
  But if I choose these DBA tables in the toad sql Editor, it works well, I am currently using my own
  credentials, not the administrator credentials. why he get different effects running in these two ways?

  You answered your own question - you know that you have the administrator privileges when you
  Open a session under your own credentials - but your id user obviously does TOAD.

  You use SQL * for the query that fails?

  BTW, you do not give us your version of Oracle - you must always tell us what it is

  Please read the forum FAQ and also the thread "sticky" by BluShadow at the top of the list of positions
  on the forum homepage. These forums are an excellent resource - you will get the best out of them if
  you follow the instructions.

  HTH,

  Paul...

  Published by: Paulie July 24, 2012 16:40

• Running header Variable Question

  FrameMaker 11

  I would like to show a hierarchy in the headers of my (manual system) document as a quick reference to the drive location in the document.

  The look I'm going to do is something like this: title 1 > section 2... results by...

  Planning > creating a Plan

  I have inserted variables. Heading 1 is my chapter name and occurs only once in each file. When I get to the section 2... It works very well. But...

  The first pages look like this:

  Planning >

  because the FM has yet to see the first instance of heading 2.

  Question No. 1: Is there a way to 'hide' the arrow (longer than symbol) until there is a second helping of the flat string variable?

  I don't know if this would be considered conditional text? Sorry, my FM vocabulary is rusty. It's been a few years and a few versions I was working regularly in FrameMaker.

  Question 2: Anyone know of an 'arrow' better that I can use (keystrokes of shortcut or ascii) rather than the > character?

  You can see what is happening to the headers running when you move from one page to another:

  

  3rd & 4th levels always show what was on the previous page! This would be very complicated to your readers.

  What you need to do is at each entrance to top title, also push empty markers for the next levels of reset these to get the following instead:

  

  It may take a bit of tweaking on certain pages according to the headers are also displayed. But at least you can control this by adding or removing content in the marker (just don't remove markers, since always FM looks backward to the beginning of the flow to satisfy the requested condition and can take the content of the previous sections).

• Book the question of transfer with the only difference being: point Info/display: any device OR any stand-alone devi

  I use ADE to transfer a PC (windows 7) in a corner. I had no problem until a recent book purchase. I can't transfer the book in the corner [title of the book CE_COPY_NOT_ALLOWED - without permission to copy the Book]. I did all the permission things that are always recommended [allow the PC, remove and allow the PC, remove records of Nook, reauthorize Nook, etc.] several times. The Nook fine copy all the old books. But this will not be [I even bought another to check and it is not]. I have 2 books (a copy and we won't) from the same Editor (I bought a few months ago and the other is a new). The only difference I see is that when you select the book, click right, look at the Info under viewing point there are 2 different things. For the book which will copy, an observation: on any device. [For the book that doesn't copy, an observation: on any stand-alone device]. There seems to be a change DRM. What can I do?

  Thanks-*-Roy

  I've not seen the ' display: on any stand-alone device "before.

  One thing to try is to evade the ADE and a copy to the .epub DRM from PC to Nook by using Windows Explorer or similar.

  The info book by ADE will tell you where the file is on the PC.

  Probably should go in the "Digital Editions" folder on the corner, but should be pretty easy to see where the .epub files go. (***)

  Copy almost certainly works independently of the ' watch one: on any stand-alone device ' detail.

  It may or may not be that the meal will be ready to show it once it's there.

  (*) p.s. just realized that you can find where the books are placed on the corner of info book by ADE as well.

  Just look at your Nook library in ADE and watch the news.

  At least, it will work for books in the corner; then say you the right directory.

• Re-run the immediate question

  Hi all
  
  I just asked an immediate execution, and I insert data into a table that is already present in the database, now a new problem has occurred trying to create a table first and then insert data in this but my statement here is throwing an error and I'm new to Toad, so I'm not able to see the error that occurs.
  
  run immediately "create table emp1 (eid int, varchar2 (100) fname, salary number (10), dname varchar2 (100))';"
  
  Help, please
  
  Concerning
  Rahul

  Hello Rahul,

  Oracle security model is such that when executing SQL dynamic using Execute Immediate (as part of a procedure or a PL/SQL block), the user does not have privileges to items or orders that are granted through membership in a role. "DBA" or something similar is likely username. You must explicitly grant the "create table" permissions to this user. The same would apply if you tried to select tables in another schema (for example sys or system) - you would need to grant explicit SELECT privileges on that table to this user.

  Kind regards
  MKP

• Run the immediate question...

  Hi all...
  
  I have problems when you run the "EXECUTE IMMEDIATE". I'm using Oracle 11 g. It omits the two using SQLPLUS and SQL Developer, so, I guess this isn't a customer number.
  
  Here is the command and its output... It could be that useful...
  

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> declare
    2  var varchar2(300);
    3  begin
    4  var := 'select sysdate from dual;';
    5  dbms_output.put_line (var);
    6  execute immediate var;
    7  end;
    8  /
  declare
  *
  ERROR at line 1:
  ORA-00911: invalid character
  ORA-06512: at line 6
  
  
  SQL> declare
    2  var varchar2(300);
    3  begin
    4  var := 'select sysdate from dual;';
    5  dbms_output.put_line (var);
    6  --execute immediate var;
    7  execute immediate 'select sysdate from dual;';
    8  end;
    9  /
  declare
  *
  ERROR at line 1:
  ORA-00911: invalid character
  ORA-06512: at line 7
  
  
  SQL>

  Thanks in advance,
  Marcos

  remove the; your selection

  declare
       lvar varchar2(300);
       ldate date;
  begin
       lvar := 'select sysdate from dual';
       dbms_output.put_line (lvar);
       execute immediate lvar into ldate;
  end;
  /
  

• With the help of all plug on tablets running Windows 7 questions

  We have an SSL gateway with the anyconnect client configuration.

  We picked up on some Windows 7 tablets that you can install through the web page.

  Once installed, you are connected to the network.

  However once you disconnect and try again with the u of the anyconnect client get the following error;

  "Anyconnect was not able to establish a connection with the specified.

  secure gateway. Try to connect again"

  We have not seen this on any portable Windows 7 or Windows XP computers.

  The URL have been added in the areas of trust.

  We went as far to disable anti-virus / firewall windows

  Disabled mode 'protected' with Internet Explore.

  AnyConnect client version 2.5.3055

  ASA 5510 series number JMX1504L05Y - worm asa841-k8

  Hello

  Please try disabling UAC and check again. Also, the ASA certificate, issued by a trusted third party or is it automatically signed certificate? If its self-signed, please try to install the certificate of the ASA in root authority store of trust cerficate.

  Once that is done, try to connect again. Otherwise, we would need collect newspapers DART to check the issue.

  Thank you

  Shilpa

• Resolutions CS6 on Mac book pro questions

  I installed an a time CS6 facility and the screen resolution is low resolution. What can I to fix this?

  Hello

  Please specify the application that you are facing problems with.

  Kind regards

  Sheena

• I can't find delete an address expired in my address book.

  No matter how much time and places, I'm looking in all the groups, folders, and subfolders in my address book I can not prevent a former address, is no longer valid from one of my correspondents to appear as one of the 'auto fill' choices in my mailbox recipient. I can't find it to remove it!

  At first, I tried to remove old ads completely, but after doing this several times (over several days and it complete re-boots), he remained, cancelled, in all the places in my address book! Finally, instead of trying to delete its all occurrences, I have just updated the email address on the box change the Contact of his all occurrences, and that took care of this particular problem.

  But I still him popping up with his old address. Where is the list that a contact to hide?

  So it seems that you edit an address book, but the next time you run Thunderbird, the changes are cancelled?

  To do this, I suggest you specifically create a bad Contact in the address book of suspicious, close Thunderbird, re-open and see if your new Contact is still there.

  If this isn't the case, we have demonstrated that the selected address book will not save the changes.

  Select the address book in question, go to Tools | Options of and export using the LDIF option.

  If the address book affected was the personal address book, search for your profile (see Help |) Troubleshooting information), close Thunderbird, and delete abook.mab.

  Similarly, if it was collected addresses, remove history.mab.

  In these cases, you will not be allowed to remove the address book broken itself, where the above actions to remove its data file. Other address books, which is defined by the user, peut be deleted.

  If you have removed one of the two above mentioned address books, and their associated data files, the address book will be automatically re-created by Thunderbird when you run then. You will need to import and create a new address book, but you can then move its content. For this reason, avoid giving the address book imported the same name as an address book existing.

  Now you can import the data (Tools |) Import) the LDIF file and after that, if necessary, move (drag) the Contacts imported into the favorite.

• hard drive.is of 2 TB Seagate to 2015 mac book pro

  a drive hard seagate 2 TB ext will be compatible with my mac pro el capitan 10.11.2 running book?. local provider think there may be questions

  The Mac supports the disc format advanced (including very large disk drives with a block size of 4 K) for Mac OS X 10.4.4 now a certifiable antique.

  There are some third party external fences that don't support drives over 2.2 to, but they are also antiques.

  These reviews indicate that you should treat the advice of the provider about Macs with deep distrust.

• [Solved] GL: Opening and closing periods does not display the LOV book

  Hello

  I created a new book and associated with the profile option ' GL: Data Access set 'and' GL: name of the book ' at the level of responsibility.

  

  I created a new responsibility to access my book.

  

  When I tried to open a period for the first time since the new responsibility, I'm not able to see all the values in the LOV Leder.

  

  Am I missing any installation?

  Thank you

  Saida

  Hello

  Try running the following question with your access_set_id in parameter:

  SELECT DISTINCT lgr.name, lgr.ledger_id, acc.access_privilege_code, lgr.latest_opened_period_name, lgr.first_ledger_period_name, lgr.short_name, lgr.chart_of_accounts_id

  OF acc, gl_ledgers lgr gl_access_set_ledgers

  WHERE acc.access_set_id =: PARAMETER.access_set_id

  AND lgr.ledger_id = acc.ledger_id

  AND lgr.object_type_code = 'L '.

  ORDER BY lgr.name

  If this script returns no rows check your request competitor status "General Scriptures accounting installation program". It seems that gl_access_set_ledgers materialized view was not refreshed successfully. Submit the program accounting General Ledger Setup again and check that the program has completed successfully.

  Kind regards

  Dmitry