Running the DHCP service on a computer virtual of Windows 2003 in ESX 3.5

Similar Questions

• Connection problem: The DHCP service does not work.

  Original title: connection problem

  After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

  Hello

  Follow these steps and check if they help.

  Step 1:

  Look for the DHCP Client service and DNS Client Services if they are started.

  a. Click Start.
  b. click on run and type Services.
  c. click right on - run as administrator.

  Check if the below mentioned services has mentioned State and type start.

  Client DHCP started Automatic\Manual.
  Client DNS started Automatic\Manual.

  Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

  To verify that double-click the service, and click the Dependencies tab.

  Step 2:

  I suggest you to reset TCP/IP settings to solve the problem.

  How to reset the Protocol Internet (TCP/IP)

• try to start the bonjour service, but get the error message: windows could not start the Bonjour service on local computer

  error message
  Windows could not start the Bonjour service on local computer
  Error 5 access is denied

  I have Vista Home.

  This prevents me to update I have tunes.

  Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.

• Get the error 'windows' failed to start the spooler service on local computer, error 1075 printing when you try to install a printer.

  Hi, printer "spooler".

  IM using widows vista, I had a problem installing my printer, can not install because that the problem with 'spooler service', followed the advice of microsoft and went to services, a window apears, "windows could not start the spooler service on local computer, error 1075 printing;"the dependency service does not exist or has been marked for deletion"can help you please?

  Hello pedro,

  We will remove and reinstall the printer:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver.

  4 reinstall the printer.

  Also, here are some links about printing reference:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• Gettitng error message "service error: Windows cannot start the BITS service on Local computer" when you start BITS service

  When I try to start the Windows Services BITS service, I get the popup error message "service error: Windows cannot start the BITS service on Local computer.»  Error 2 ther system cannot find the file specified. »

  Where can I find the required file?  It is available from Microsoft to download?

  Thank you

  It could be a missing/incorrect servicesdll value. See if a request would help the BFE (#11) service registry fix in this page:

  Register various fixes for Windows 7/XP/Vista:
  http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

• I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If this fails, CC help | Applications creative Cloud back to update evaluation Mode to 2015 CC

• Run the UCM Service using custom

  Hello

  I was looking for information how to run the service from the Complutense University of MADRID by composing personalized and found some articles about the same:

  http://jonathanhult.com/blog/2012/06/execute-a-service-from-a-Java-filter/

  http://jonathanhult.com/blog/2012/10/who-created-that-site-Studio-section/

  http://www.redstonecontentsolutions.com/5/post/2012/05/executing-a-service-from-aservicehandler.html#sthash.X31M6ZCS.tvlE83Km.DPBS

  I'm new to webcenter content and could not understand above blog stuff correctly. Queries:

  1. we make use of the service of the University Complutense of MADRID to filter, Service or ServiceHandler. Is there a difference in the code required to perform a service?

  2. What is the correct code to run the UCM service?

  No, but your custom component can have html resources (including) and html templates that can contain some iDocScript. And there, you can use this way.

  For the complete list, a service can also directly call subservices just the way it is defined - a personalized service is defined in the .hda file and it can contain a line containing such a call.

  As you are new to the WebCenter content, I recommend you use the component wizard. You must also be familiar with the creation of custom components before you dive into programming (and the functionality of the system as it is, because very often, people develop functionality that is already there).

• run the Web service

  Hello
  my English is not very good
  I use jdeveloper 11.1.1.3.0.
  I have a function in the module of the application. return type of function is 'list < ViewObjRowImpl > '.
  I'm a Web Service from this function
  Accordingly, I have run 3 view Obj and do a calculation on the objects in view. then I put the final value in other Obj view (4th). and then I put the 4th view Obj value in a list < ViewObjRowImpl >.
  
  part of the code
  
  Set of lines objRowSet = getViewObjectImpl () .getRowSet ();
  objRowSet.first ();
  
  < ViewObjRowImpl > the list result = new ArrayList < ViewObjRowImpl > ();
  
  
  for (int i = 0; i < objRet.getRowCount () 2; i ++) {}
  result. Add (i, (ViewObjRowImpl) objRet.getCurrentRow ());
  objRet.next ();
  }
  
  try {}
  return the result;
  }
  catch (Exception e) {}
  
  ///////////////////
  
  When I send the parameter to the Web Service and run the Web Service: correctly fill the list with the value of obj view, and also the function run the last line 'result' and don't you go into the catch block
  but the Exception below is coming:
  
  < JAXWSMessages > < Journal > Exception during execution of the business logic: Transaction has expired after 34 seconds
  BEA1-023E16AE9EC79E472B1E
  
  I don't know why, can anyone help me?

  You can try to increase the JTA transaction time-out in Weblogic. http://docs.Oracle.com/CD/E13222_01/WLS/docs81/ConsoleHelp/domain_domain_config_jta.html
  (which is perhaps too short for your 30 ws)

  Dario

• You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium. Do you know where I can find documentation and how - in?

  You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium.  Do you know where I can find documentation and how - in?

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the below link:
  http://social.technet.Microsoft.com/forums/en/IECs/threads

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why am I not able to disable the DHCP service without losing my internet connection?

  I have a DHCP service that I can't disable or configure all settings. If I turn off the service, I lose the internet connection!

  This is not a service that is needed and I think it's the reason why I have so many problems with my computer.
  How can I fix this. I also want to say, that I tried to disable the service by using the Service Manager and is the only setting that I can change, and when I do, I lose the internet connection!

  Of course, you will lose Internet connectivity If you disable this service, just read the description on the page when you select this service in computer management or anywhere else list services appears.

  DHCP Client Description:

  Registers and updates IP addresses and DNS records for this computer. If this service is stopped, this computer will not receive IP addresses dynamic and DNS updates. If this service is disabled, any services that explicitly depend on will fail to start.

  An IP address is how your computer is made known on the network so that it can communicate with other computers, so without any communication can take place between him and all the others, especially Internet.

  Rob

• How can I get the WiFi service on my computer?

  ATT, my ISP, says I have included WiFi with my DSL but I don't know how to tell the computer which. I am running Windows Vista.

  Hi Pat l.,

  1. what exactly happens with your wifi connection?

  2. are you able to connect? You receive error codes ot?

  You can check out the following link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  You can also run the Network Diagnostics and check.

  With the help of the network in Windows Vista Diagnostics

  http://Windows.Microsoft.com/en-us/Windows-Vista/the-doctor-is-in-using-Network-Diagnostics-in-Windows-Vista

  Hope this information is useful.

• Could not start the DHCP Service on any ESG

  Hi all

  I am currently training on the NSX. I lifted a laboratory, implementation of many of the features and then eliminated the NSX to do once more. I deleted all the logical switches, all edges of the NSX, all the controllers of the NSX and no Manager NSX until I deleted it. I was able to stand up to the lab again from scratch, but the only feature that I can't use now is the DHCP server on ANY ESG, I create. I'm able to add DHCP scopes, but when I try to "Publish changes" I get the following error:

  

  I tried to provide only the required parameters (start and end IP), but no luck. I was wondering if anyone has encountered this error. Thank you.

  -Rob

  After the upgrade to 6.2 NSX, I think I found the problem because the v6.2 gives me a more descriptive error. Using the same DHCP configuration as in my laboratory original, whenever I tried to publish my changes, I received an error saying that my domain name is not valid. As a result, that's what I learned: If your DHCP scope Specifies a domain name, please make sure that it is a higher level three characters valid, such as com or net domain name. My original scope in the laboratory was using home.local. I changed it pour.com and it worked.

• Must regularly restart the DHCP Client - HP Pavilion 500-205 DT - Windows 7

  HP Pavilion 500-205 DT - Windows 7 Home Premium 64 - bit SP1

  Realtek PCIe GBE Family Controller - pilot 7.67.1226.2012

  Bought 3 identical machines for our daycare. Set up the same. All work fine except ONE of them becomes inaccessible periodically (every day more or less) on other computers on our small LAN-to-peer Windows. You can see, but cannot access any shared folder. To access OTHER computers on the local network of it there is NO problem. All 3 machines have the same profile sharing, workgroup, permissions, AV, firewall, all settings. I realized by restarting the computer solved the problem immediately but temporarily. I reduced to restart the DHCP Client service. Do all works well immediately, but temporarily.

  I tried the things:

  Call support HP - not useful at all. It is under warranty.

  IPv6 disabled

  Disabled wireless

  Disabled network card stopcock energy saving

  Definition of recovery CLIENT DHCP on:

  First failure = restarting the Service

  Second failure = restarting the Service

  Subsequent failures = restarting the Service

  Reset Fail Count after = 120

  Restart the Service after = 0

  But again, this is not the case for other machines with the default settings. Nothing works except the Client DHCP service is restarted. Loss of access occurs with or without someone connected or using it. It has happened since its first establishment.

  I don't know if the HP warranty covers the OS loaded at the factory. I don't want to restore the thing and start over. I'm not a Pro, just the guy in the office who did these things, but it seems that the network card may be faulty. I don't know if I can convince a person of first level support phone to have me bring the machine in an approved place.

  Any help greatly appreciated,

  Larry

  HP sends a FedEx box to put the thing in picked it up. I'll mark this resolved thing. Thank you all for your comments!

• I can not run the most recent version. I get a window saying firefox.exe is not a Win32 file

  I can install the 5.0.1 version but it won't work. I got this version works when someone elso was using my computer. I don't know how it happened, but the calculation froze and I couldn't run Firefox afterwards. I got Firefox to my computer. Downloaded the latest version once again and I tried to run it. I've done several times without success

  It seems that the installation is corrupt.

  Follow these steps.

  1. Go to Download Firefox 5.0.1 and download the installer to your desktop. If necessary, use Internet Explorer to download, but in this case, choose "Save" when you see the prompt. Do not choose "Run"
  2. Then go to add/remove programs, scroll down to "Mozilla Firefox" and delete it, choosing to keep your bookmarks, customizations, etc. (don't tick the box).
  3. Reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox
  4. Finally, run the installation file downloaded previously on the desktop.

  Your bookmarks, etc., customizations are stored in a different location and will become available to you even once you complete the installation.

  As a precaution, make a backup of your bookmarks as follows:

  1. Press CTRL + SHIFT + B to open the Bookmarks Manager.
  2. Click on the link to import and backup and then click on HTML Export and save the file somewhere.

  You can use this file at any time to restore your bookmarks if that proved necessary. Simply reverse the procedure and choose "Import HTML" instead.

  NB. If you use a download accelerator, turn it off before trying to download Firefox. These utilities are a common cause of corrupt files, in which case you get the error message you mentioned.

  If this suggestion solves the problem for you, please click the button solved next to this post after logging in to the forum. This will help others looking for a solution to the same problem.

  Thank you.

• What is the best way to backup of virtual machines on a standalone ESX with the data store local

  Hello

  I want to save the virtual machines on a host ESX autonomous. and all of these virtual machines is the local data store.  What is the best way to save these virtual machines in this situation?

  And probably we don't provision VTL on the local data center, so it is possible to use VCB to backup? And VCB is a good choice compared to the traditional method that installs the backup client in each virtual machine?   Because I think that in this situation with the data store local, it cannot not reduced the load on ESX hosts and network overhead can be avoided.

  Thank you!

  LAN

  > 1. VCB usable remote tape library? I mean it's not local library and uses the tape library to another network data center.

  VCB is completely unrelated to the tape library, it is a framework, not a backup solution. If your standard backup software can work with the remote tape library you can try it to ungrateful with VCB.

  > 2. what the difference bwteen hot - added NBD and modes if there is that an ESX host with store data local and want to use a virtual machine like VCB proxy? I think that they are the same: the VCB proxy read data through the I/O of the ESX host stack in this situation.

  NBD works on network and the backup traffic goes through the service console connection. Hot add uses special machine for assistance to connect vmdk to and uses of e/s disk stack instead of e/s network.

  > 3. Veeam Backup is free software?

  No, it isn't.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru