Running the software iSCSI on a different subnet than the management traffic

Similar Questions

• How to run the managed server weblogic as windows service

  Hello friends,

  I want a guide step by step to run the managed server and the application via the windows service.

  I am able to create admin server as a windows service. I tried a lot of managed server, but not luck.

  Please help me to solve it.

  Hello

  Here am attached the script to create a windows service for p6 service I used for my management environment.

  SETLOCAL

  Set DomainName = P6EPPM

  Set USERDOMAIN_HOME = C:\Oracle\Middleware\user_projects\domains\P6EPPM

  Define SERVER_NAME = P6

  Set PRODUCTION_MODE = true

  Set ADMIN_URL =http://p6eppmdev:7001

  CD % USERDOMAIN_HOME %

  call %USERDOMAIN_HOME%\bin\setDomainEnv.cmd

  call "C:\Oracle\Middleware\wlserver_10.3\server\bin\installSvc.cmd".

  ENDLOCAL

  I hope it will work for you.

  Try this and updated the forum.

  Concerning

  Kumar

• How can I run the Manager in a tab

  On FF 6 and above all, when I run the addon Manager, it appears in a separate window which only a not the 'decoration', i.e. the control bar at the top, so it is difficult resize, move, close, etc..

  I'd rather widely run in a tab addon Manager - y at - it a setting for this works well?

  Note that on another machine, I'm on the flow of the beta (7.0), and the hostel Monsignor addon runs in a tab.

  You use MR Tech Toolkit extension?

  https://addons.Mozilla.org/en-us/Firefox/addon/Mr-Tech-Toolkit/
  http://www.mrtech.com/extensions/local_install/

  Option to show Extension/Theme manager window in: New Window, New Tab, Current Tab/Window or Sidebar
  

• How to run the Manager user interface programmatically

  I am looking for a method to run programmatically (from Labview), the Manager user interface, and then to connect it.

  Is there an API from .net to who?

  Thank you

  Note: I developed for earlier versions of VeriStand, a high-level application that manages projects of test benches and their versions. I want to update with the new manager of the user VeriStand interface.

  It is not a .NET API to control UI Manager, but there are some command line utilities, you can use to launch the user interface Manager, open a specific project, specify the IP address of the gateway to use and connect automatically.

  Try the following command line arguments:

  /nivsprj 'c:\project.nivsprj' Gateway localhost / connect

  They are documented in the online profile of Stimulus help editor.

• Traffic on the management ports load

  Can someone tell me what traffic is running on the management port?  I install vsphere 5.1 with 3 hosts, vmotion and san iscsi drive. I intend to separate management traffic on a closed network of 1 GB in which the management ports will connect to a 1 GB switch which will have a port connected to the global network.  Use VMotion cela this port strongly with its activities?

  The cluster will be slightly loaded with only 8 to 10 vm across all 3 four hosts of Quad Core processor.

  I intend to connect with NICs 10Gb iscsi san and dedicated switch.

  If I had to, I could use a 10G switch to the management network.

  The individual virtual machine will be nic interfaces 1 Gb individual key of the network if necessary.

  If you could tell me the documents that would also be appreceiated.

  any thoughts would be appreciated.

  Thank you

  Ken

  "Best Practice" is said to have a network card dedicated to the management, and a dedicated for vmotion. Ideally different subnets / VLAN.

  In smaller environments, but I often will create this:

  vSwitch0 with 2 network cards (if everything goes well on the cards separated/asics) and with the management and vmotion vmkernel port. It works very well, thank you very much despite sometimes described as not "best practices." Well - I think that the concern is that in situations of heavy vmotion (especially when storage vmotion is concerned) traffic management could be hampered/flooded. I just never saw him in the real world, although in environments with more than 4-5 guests I always put in place in accordance with the "best practices" just because...

  vswitch 1 with 2 maps, 2 vmkernel ports (each with its own ip address) for iSCSI

  vswitch 2 with 2 (or more) network cards and however many ports of VM / VLANS are necessary.

  (just to be clear, the 'best practice' would vswitch 0 with 2 network cards and 2 vmkernel ports that configured in the management and the other as vmotion.) Each nic will be dedicated to a vmkernel, but available failover for others...)

• The vMA traffic packet capture

  I'm deploying a new VM vMA. I have the virtual machine on a different subnet than my regular production network. Everything is good so far except when I try to run the command 'vma-update' When I do that, I get a message "no route to host". I followed it down to the access list that I have on my switch. Do I have to do now is execute a capture of packets to see what IPS the vMA is in talks with so I can enable them through on my access list.

  What is the best way to run a capture of the vMA packages?

  Thank you.

  Well the URL can be solved in several addresses/etc, but I guess already know you that.

  Eaiest is to perform a tcpdump, it is not installed by default on the vMA, so you can get a YUM repo and configure another session in which you make a tcpdump while you're trying to run vma-update

• How to get iSCSI SAN connected to ESX when the SAN is on a different subnet?

  Hi all

  I have two machines ESX which are directly connected to a San that are on a different subnet other network cards.  Other network cards are 10.x.x.x and the SAN is on 172.16.x.x, however whenever I try to add the iSCSI storage, the system will never find the LUN.  I put the vmkernel 172.16.x.x but it does not always find them.  I know that the LUNS are configured correctly if its ESX just having problems with the other subnet.

  You need to activate the Service Console to see the iSCSI SAN, too. This is because you use the initiator software. For example, you can add a second SC in the vSwitch that your VMKernel Port is connected and align on the same subnet.

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Target subnet mask and the gateway in different subnets and clock error

  Hi all:

  Need help. I have a standalone PC operating a direct VI on a CFP with a crossover ethernet cable (developed on my laptop, compiled and installed as a standalone on the PC). When the VI runs on standalone PC version, everything works (click the button, analyzers are read), but the time being pulled from the CFP is wrong, and infact resets to December 1969, a default value. I am error checking, and no error is marked with the CFP, slaughter programmes. When I go to the MAX function, the time playing of the CFP is the funky time. Looking at the IP addresses, I generally use a very standard protocol (192.168.000.001 for the PC, 192.168.000.002 for the CFP currently running on the subnet for the pc and the PSC 255.255.255.000). However, when I apply this Protocol on the CFP through max, it gives the error "the subnet mask you entered puts the target and the entry door to different subnets." I am not versed enough well understand this, and what I read in 2 postings here, I tried to harmonize the IP numbers and the subnet, and they do not seem to help. When I put intentionally in false numbers IP or subnet default time synchronization time correct (pc), but functions block (as expected). It is certainly not an issue of PC zone.

  Anyone can offer any guidance?

  Currently runnig LV 8.2 with drivers of 2009. PSC 1804 with MAX 4.6.

  I appreciate all help.

  Best regards;

  GIS.

  OK, I solved it. FYI: for those who are not aware of the IP: IP of the host and default gateway server to the same value. My work for the host computer are 192.168.000.001 and subnet masks can stay 255.255.255.000. The CFP has been set to 198.162.000.002 with a 90.00.00.03 DNS. Time server has been blocked by the Norton 2009 Firewall (even with an exception) and thus the cruxt of this issue together. I had to uninstall completely from this "software". I hope this helps.

• Satellite Pro 4200: need to know what software is running the Cd/DVD burner?

  I recently bought a laptop satellite pro 4200 (new to me) and can't understand what program will run the burner.

  Anone help?

  If I understand correctly you are looking for the application software / who could burn CDs. Am I right?

  Well, I use the Nero burning rom software. It s really great program with different characteristics.

• Can I run old software to the new OS?

  Hello again,

  My demo see the and the client feel it good, now I have to make an extension to the software.

  I remember that I ask the question very probably this one, but this is very different to the previous situation.

  I use JDE 4.6 to compile the code, I can run the software in the new OS such as OS 4.7 and 5.0 only certain element in a bad position? The software generates error this effect from not available to run and show anything or crash the machine?

  Finally, thank you everyone who help out me of a bad situation.

  Well actually, the development of BB is forward compatiable, if app is compiled in 4.2 and then he canrun on 4.2 and above versions.

• Link to maps software iSCSI NIC vmkernal and the vsphere client

  Hello

  IM playing with our VMware 4.1 hosts a Dell Equallogic PS4000E, connection

  So far, I have:

  Created ports VMkernal

  Apply adapters

  The iSCSI initiator enabled

  But apparently, I need to run the following command to bind the ports of iscsi software adapter:

  Add an esxcli swisscsi nic - n vmk # vmhba d #.

  Is anyway in the Vsphere Client?

  Hello.

  Unfortunately, there is no way to do it from the vSphere client.

  Good luck!

• find the number of map software iscsi vmhba

  Hi, im trying to write scripts for automation but I find on different server models the software iscsi adapter varies from vmhba32 to vmhba39

  Is it possible that I can find that number using powercli so I can put it as a variable to be used for another command later in the script?

  Thank you

  Forget the bug with iscsi.

  It's the derivation

  $esxName = 
  (Get-VmHost $esxName).StorageInfo.ExtensionData.StorageDeviceInfo.HostBusAdapter | where {$_.Model -like "iSCSI Software Adapter" -and $_.Status -notlike "unbound"} | Select Device
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• The Clones related, configure different subnets?

  The Clones related, configure different subnets?

  I have a great environment and a lot of different software packages, with combinations of different software.

  It is therefore important to contain the number of MODELS to a minimum.

  I need a way to modify the models 'virtual material', to change the tag VLAN (subnet) when you set up a new POOL.

  When you use a TEMPLATE in 'normal' VMware, you can change the virtual material, to be able to put the new virtual machine in a different subnet.

  Is there a way to do (modify virtual hardware) by script, or...?

  HTC

  Whenever you change the network on the main image, you will need to take an another wink.

  The likely scenario is so several shots with different networks as you deploy your pools.

• Cannot run the Photosmart C7180 HP printing software

  Hi, I'm new here.

  I had been using the printer, and following a system failure and corruption of a couple of files, I had to download the operating system on the HP site.  When I tried to run the software, said that a more recent version is already installed on my system.  I deleted all HP components using the Add/Remove function on my control panel.

  The software still wouldn't go, indicating the same problem with a newer version,

  I have looke in the Program Files folder and found that the HP programs were not deleted and proceeded to delete them manually.  After the reboot, I still ran the files downloaded from HP and again received the same message on a newer version already on my system.

  I guess that somewhere there is a tag that should be deleted.  I am not a computer wizz so if anyone can suggest, where should I look?

  My system is a Win XP and is up to date, running on an Intel-based system.

  Thank you.

  Gordon

  Well, good news.  I had the new program in place.  My problem was being too specific, trying to load one program for my C7180.  The solution was first to use the option to HP to check my system and to recommend and automatically download the appropriate program.

  He ended that there was a more recent software, which covered series printers Photosmart 7100 together.

  Thank you for your time David.

  Gordon

• I have download an IDM software.there are as many files how can I understand that by running the file IDM will install in my computer and I can use it.

  I have download an IDM software.there are as many files how can I understand that by running the file IDM will install in my computer and I can use it.

  Hello

  Contact the Support of IDM in this regard.

  The link there is a Support tab on the top right > run the mouse cursor over them for the Support Options > 'how to use IDM.

  http://www.internetdownloadmanager.com/download.html

  See you soon.