Running Windows Vista 32 bit: get the "Windows Update_00000646" error code "Windows Udate_dt000".

Similar Questions

• Do not install windows vista 32 bit service pack 2, 8007045d error code. So frustrating!

  Hello

  After that several futile attempts installation of sp2, I don't know what to do, I have researched and tried each end I found to date, but no luck...

  Let me know if anyone knows anything that might work!

  I'm getting so frustrated with it... If no one can help me now I think I'll buy a new one!

  Thanks in advance,

  Sophie

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• I get the IRQL_NOT_LESS_OR_EQUAL STOP error code

  I get the error code IRQL_NOT_LESS_OR_EQUAL STOP 0x0000000A, 0x8204083c, 0 x 00000001, 0 x 00000002, 0 x 00000000.  After I try and connect. Safe mode I would like to connect, I tried several restore points system has not worked, laast known good configuration didn't work, scandisk, scan of the hard drive and memory said its ok.  HP technical support said that I have to wipe the drive, but I was wondering if there is a patch on or if it is a known issue. (Laptop HP dv9000 purchased in w canada)

  It can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• My computer stopped the update since October 23, 2010, and whenever I try to check for popular update, I get the number of error code 80070490. Help, please!

  My update of the computer window stopped updating since October 23, 2010 and each time I tried check the update popular I get the error code 80070490. Help, please!

  Hello

  questions have already been addressed here in my 1st reply:

  Please read the answer given

  Here is the solution for your problem of MS

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Get the Bluescreen 0x0000007E error code during the installation of the drivers

  Original title: blue screen during the installation of the drivers...

  Hello microsoft community. I had a problem about Windows 7.

  I am currently using an Acer Aspire, and my internet drivers won´t just install.
  The following happens: when you install the driver in my computer properties, it will say that it was not possible to install it.
  When you use the .exe installer, it will go straight to a blue screen, the same phenomenon occurs when you try to use the .inf via installation drive of W7.
  The error code is:
  STOP: 0x0000007E (0xC0000005, 0x00000000, 0x8B3831C0, 0x8B382DAQ)
  No message like: ERR_Something appeared, just a bunch of text and a STOP code.
  My wireless card is an Atheros ARB597.
  Ironically, nothing bad happens during the execution of a distribution such as Ubuntu Linux, the network works fine.
  The only BONE observed to have problems is W7, well, it's never happened before...
  Oh, and the blue screen is noticed, sometimes appear when the wireless led lights up (what it means when the wireless wins a connection with Windows), when this happens, the driver will install, but a yellow triangular symbol with an exclamation mark appears on the driver, the net still does not
  Also, I have extracted the minidump and the .xml generated by the crash, if it helps. I can post

  Hi Mary,

  This error (7th) is usually a driver problem and display adapter (video) driver is the most suspicious if
  It could be others. Antivirus/antispyware/security programs, major software and hardware (heat)
  questions can also cause the error.

  Perform the steps from the link below and see if it helps.

  Resolve stop (blue screen) error in Windows 7

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Note: make a backup of all your data on an external drive before you perform an upgrade in-place, as this may result in loss of data.

• When I try to update and install I get the 00000646 ane error code

  When I try to update and install I receive and 00000646 do - what I do and what means error code

  Rick

  Try to download and install the update manually http://catalog.update.microsoft.com/v7/site/Home.aspx using the update "s number of KB.

  If this does not work, please transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the specialists of update will be more than happy to help you.

  I hope this helps.

  Good Luxk!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I get the message 0x8007043C error code when I try to get updates for windows xp.

  I get an error message when I try to get updates for Windows XP 0x8007043c. For windows installer pop shows I'll click on it and then I got error handler and also I'm being arrested when I am trying to download things directly, it's a virus than other od are picking up my security programs, is there something I can do? Any help would be appreciated.

  The options provided below may help you solve the problem.

  I quote Maurice N ~ MVP - a regular contributor here:

  This give a try.

  Start button > select RUN > type of services. MSC

  The following services are required by the Windows Update process.

  In the services (services.msc) management console may NOT be * Disabled * in the startup type.

  They show a manual or automatic startup type.

  Here are services and their startup types:

  Background Intelligent Transfer Service (BITS) manual

  Automatic encryption services

  Remote Procedure Call (RPC) automatic

  Restoration of the automatic system of Service

  Another suggestion: browser in Internet Explorer > main menu Tools/Options Internet > Security tab / click the Green Trusted Sites icon / click Sites.

  Click 'require a server secure (https :) for all sites in this zone' to * clear * the selection.

  In the ' add this Web site to the zone: "field, add these entries to the list of"Trusted Sites"- type

  http://download.windowsupdate.com    (click to add)

  http://windowsupdate.Microsoft.com

  http://update.Microsoft.com

  Click OK. Apply the changes.

  Also, make sure that you are connected with administrator rights when you access Windows Update.

  UTC/GMT is 09:00 on Tuesday, June 12, 2012

• lots of updates to vista 64-bit problems. 641, 8007064 (error code) 36275.2503665, 2518863, 951847, 950125, 2536275, 954459, 9555971, 954430, 979688, 986615, 2347290, 655020, 973688,982799, 975558, etc..

  Vista Home pre. 64 bit. update problem. page update code error 641 and 8007064. A lot of 959108 KB 2536276, 2503665, 2518863, 951847, 950125, 9536275, 954459,2555971, 954430, 979688, 9826615, 2347290, 955020, 973688, 982799, 975558, etc tried difficulty option now, no help.

  Hello

  1 have. what Fix - it you tried?

  2 have you made any changes to the computer before the show?

  Method 1: Run the fix - it of the article mentioned below:

  The problem with Microsoft Windows Update is not working:

  Method 2: Run scan SFC.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

• Can't do the microsoft update error code 0 x 80090305

  Running XP Pro SP3 - cannot do the Microsoft Update error code 0 x 80090305

  0 X 80090305 SEC_E_SECPKG_NOT_FOUND

  I suggest you follow the steps in the link below and check if it will help:

  http://support.Microsoft.com/kb/836941/en-us >

• A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

  A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  Hope the information is useful.

• Windows Media Player permission to run under Vista 64-bit

  How to change the setting for a specific program so that it will run under Vista 64-bit without asking permission every time as the permission?  For some reason any of all the pre-installed software that came with my computer, only Windows Media Player asks me permission every time I try to run it from the desktop icon.

  Remove icons from desktop and quicklaunch and created new file programs.  Problem solved.

  Thank you

  Bewildered2

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  The upgrade from Vista to Windows 7

  I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  Have you tried to do an upgrade installation or a custom installation?  A custom installation requires you to back up your files and settings with Windows Easy Transfer and then reinstall everything after installing the new.  If an update install does not install work, you need to do a custom.

  In addition, a Windows 7 Anytime Upgrade will not work and you get a message from a platform if you have bought a UA and tried to use it with Vista.  Vista upgrade requires a detail, a copy in the Windows 7 box.

• In Windows Mail, I get the following script error: unexpected call to method or property access - URL: res://ieframe.dll/preview.js

  Original title: HELP

  {Moderator note: version of Windows has not been confirmed}

  In microsoft mail I get the following script error and cannot print emails, then the error lock the computer.

  Script error

  An error has occurred in the script on this page

  Line 215

  1 tank

  Unexpected call to method or property access

  Code 0

  URL: res://ieframe.dll/preview.js

  Do you want to continue running scripts on this page

  Yes No

  I can print other documents.

  Please help I need to be able to print my emails.

  Thank you

  Windows Mail uses the Internet Explorer print engine to print.  You can print from Internet Explorer?  It is possible that your antivirus software might be the cause.  You can try to turn off and then restart and see if it will print.  Otherwise, you will need to provide more detailed information depending on your version of Windows, what e-mail program, you are using and what version of Internet Explorer you are using.

  Steve

• Pavilion dv7-6b20ex: since the upgrade to windows 10 I get the update message error 0 x 80240017 Windows Defender

  hi..

  Since the upgrade to windows 10 I get the update message error 0 x 80240017 Windows Defender

  I hope to have useful response... Thank you

  This letter specifically;

  Updated definition for Windows Defender - error (definition 1.203.2341.0) KB2267602 - 0 x 80240017

  Updated definition for Windows Defender - error (definition 1.203.2341.0) KB2267602 - 0 x 80240017

  https://support.Microsoft.com/en-us/KB/918355