RV - 120W:How check the router site history?

Similar Questions

• How can I disable the 'top sites' history of cleaning does not remove this and confusing and a risk to privacy

  How can I disable the 'top sites' history of cleaning does not remove this and confusing and a risk to privacy.
  It also serves as the sites I want to keep are my favorites
  Is there an alternatively an add-on for this

  Hi Wayne_a,

  If you are concerened about your privacy you can turn off this feature:

  Disable the new tab Page

• How does the routing within a virtual private network?

  I have 2 sites with their own internet connection, and there is a router on both ends that use VPN endpoints.  Both sites use 192.168.x.0 24 IP on their local network.

  When I ping from a computer on my LAN to a machine on the other LAN, how is that routing happens?  I don't see all the entries in the routing table.  And Setup on both devices is very simple and does not all IP except each other static external IP.  So, how is my router knows that when I ping 192.168.40.15 192.168.100.3 it's time to use the VPN to the other network?  When I run a tracert on that same IP address, it shows just 3 entries, my internal gateway, the other networks external IP and 192.168.100.3.  When I run a tracert address IP external, complete list of hops.

  So how is this working?  Obviously, the two cases have the same jumps, but how my router knows that the other router is the endpoint for the traffic directed to the subnet 192.168.100.0/24?

  The way that routers identify it is interesting to be incrypted (traffic) through the crypto ACL that you set up and apply to the card encryption.  When that traffic gets into the router, the router checks the routing table and sees that it has no route to the 192.168.100.0 network if it sends traffic using the default route.  When the traffic between, or cross is perhaps a better term, is the external interface ACL crypto and the router begins to take steps to encrypt the traffic and send it on the VPN tunnel.

  The crypto ACL must be configured at both ends of the tunnel and be eachother mirror images.  So if one side has the ACL:

  access-list 101 permit ip 192.168.40.0 0.0.0.255 192.168.100.0 0.0.0.255

  then the other side will have to be:

  access-list 101 permit ip 192.168.100.0 0.0.0.255 192.168.40.0 0.0.0.255

  So to summarize, routing takes place, but it is in the form of the default route.  While traffic is about to leave the external interface it is mapped to the crypto ACL and if a match is found, the traffic is encrypted and sent over the VPN.

  I hope that the explanation is understandable.

  --

  Please do not forget to rate and choose a good answer

• How long the Messages keep history to Yosemite? I know for iDevices you can choose between 1 month or 1 year but I wonder about the way it manages the Mac...

  How long the Messages keep history to Yosemite? I know for iDevices you can choose between 1 month or 1 year but I wonder about the way it manages the Mac...

  Messages or e-mails?

• I have 22 SPSS for Mac.  Since I upgraded to El Capitan, I have a number of problems.  I checked the Web sites of IBM, but they only mention fixes for SPSS 23.  Any thoughts would be greatly appreciated.  Thank you.

  I have 22 SPSS for Mac.  Since I upgraded to El Capitan, I have a number of problems.  I checked the Web sites of IBM, but they only mention fixes for SPSS 23.  Any thoughts would be greatly appreciated.  Thank you.

  I am running SPSS 23.0

  You can upgrade to 23.0?

  Also, have you looked here

  http://www-933.IBM.com/support/fixcentral/SWG/selectFixes?parent=SPSS & Product = IB m / + Information Management / SPSS + statistical...

• How bookmart the same site twice (or more) at the same time?

  I'm running on firefox 36.0.1. and windows 7. I would like to bookmark the site even more than once at the same time. But firefox just appears as "edit bookmark" but does not allow me to another bookmark to the same Web site. So, how can I create multiple bookmark for the same site at the same time? I remember that firefox used to allow this, but it is not disabled?

  In the early days, it was possible to save bookmarks on the same page, but that was considered a bug and has been deleted. Now you can use copy/paste to duplicate in the dialog box (Ctrl + Shift + b or library "Show all bookmarks"). For example, select a bookmark in the pane right, Ctrl + c Ctrl v, then you can rename the copy and move it where you want.

• I am trying to disable the option 'comments' on my wireless internet connection. I was told to go to my configuration of the router, but how do the router on my PC?

  In the past, I have activated the 'comments' option while others may have access to my wireless internet, but now I want to turn it off.  I got to go to my router configuration. How do the settings on my router on my PC?  I forgot how I activated the option.  Thank you very much.

  Hello

  You must contact the manufacturer of the router for the best assistance.

• How check the version of the adobe illustrator document.

  Hi all

  Can someone guide me how to check the version of the adobe illustrator document. (current document).

  I tried to use app.version which gives the version of adobe illustrator application i.e. for CS2 12.0.0.

  But I want the version of the illustrator document. I tried app.activeDocument.version which gives me the value undefined.

  Any suggestion on this?

  Also, please help me with the script to find the type of font used in the document. for example, times new roman, arial new etc.

  Thanks in advance,

  Sanat

  OWH dear

  var v_fl = "/ d/_temp/3ds_eles_msh.ai".

  function getFileVersion (v_flToOpen) {}
  var v_fileObj = new queue (v_flToOpen);
  VRS var = null;
  v_fileObj.open ("r");

  try {}
  While (v_fileObj.Tell)< v_fileobj.length)="">
  var row = v_fileObj.readln ();
  Alert (Line.Reflect.Methods);
  var idxOf = line.indexOf ("creator: Adobe Illustrator (R)");
  If (idxOf > 0) {vrs = line.substring (idxOf + 30, line.length) ;}}
  }
  }
  catch (ex) {alert ("there's a kind of strange error... damn and everything was going so well") ;}}
  Finally {v_fileObj.close (); return vrs ;}

  }

  var v_fileVersion = getFileVersion (v_fl);

  If (v_fileVersion! = null) {}

  Alert ("the Version of the file is:" + v_fileVersion);

  } else {}

  Alert ("now seriously done really you have selected an .ai file?") If so, something strange happened. ») ;

  }

  see you soon;

• check the last site via ajax call vrsion

  Hello. I want to check what the latest stable version of Firefox available for download, how do I do?

  Hi, maybe you can ask https://product-details.mozilla.org/1.0/firefox_versions.json to that effect.

• In TB client when composing an email-how check the additional online which is added when the key entry/return/LF is struck? Thank you

  I have searched for menu bars, but so far have not found the formatting for this command. Any guidance is appreciated. I'm new to TB and so far it has been very satisfactory. Thanks, Jim

  Tools | Options | Composition-> general. There is a checkbox which the label mentions in paragraph formatting and text. Clear this check box.

• I would like to disable the download only history

  Hello

  I would like to disable the download only history, I tried the option 'clear history when firefox closes' check the download only history, but it did not work. the download window is clear, but it's all there in the download history.
  is there a way to disable the download only, history without touching the others intact?

  Thank you
  Rgds
  JP

  The download history is stored as part of the normal history (visited sites/links) and a special annotation identifies it as a download item in the history.
  
  If you can not separate the two more.
  
  Note that the classic Download Manager stores its data in a different file, you will need to check both if you have set on remember downloads.

  You can set the browser.download.useToolkitUI pref Boolean true on the topic: config page to restore the old window Download Manager and check all the settings download appear in "tools > Options > general.

  The pref browser.download.manager.retention has no effect with the new download manager and is forced to manual (2).

  • http://KB.mozillazine.org/about:config

• Printers HP B110a cannot communicate with the laptop, but both will be connected to the router?

  OK, here's an interesting problem that has been banging my brain for hours, one of my friends has a HP Photosmart all in one printer B110a. Now I can get the printer to connect to the wireless router, no problem. Can I also have the phone to connect to the router, the problem is that the printer cannot communicate with the laptop. The router brand and model is the Linksys wrt54g

  Now, I took my friends laptop home and tried to see if she could detect my wireless printer model different on my router which is a TP WR340GD I went in devices and printers, and went to Add a printer and Add Printer wireless, it instantly detected my printer via the wireless network. There is no problem on the side of the laptop. I am sure that any firewall on the laptop was turned off when I tried the connected printer.

  So now I have my friends printer here with me and decided to try and see if I could detect the HP Photosmart printer All In One Printer on my laptop on my TP WR340GDwireless router. Yet once, it worked perfectly and it has detected the printer and works wireless without fault.

  I'm down now to the conclusion that the problem is with my friends router Linksys wrt54g I'm gone in the settings of the router, change the wireless channels, changed security between WEP and WPA/WPA2 and AES AND TKIP wireless and this does not solve the problem.

  I can access to the Photosmart B110a: the Web server integrated in a browser ONLY if I have the laptop to the router physically connected by Ethernet cable when trying to access my router from a friend, but I can access through wireless on my router. The problem is probably something very simple that I forgot, but I was more all I can think that I tried to reset harder than the printer cleaned the network settings on the printer as well from the display of the printer menu.

  I'm really lost now, someone at - it suggestions?

  Hey pcwizard, ok, I checked the router settings and Mac filtering turned on, so I decided to reset the router, it restored to factory settings. Re-Setup wireless and once again I tried, still had no luck with the laptop to communicate with the printer.

  in any case, I decided to connect the cable from the printer to the laptop and took the USB to wireless Assistant. As I reinstalled it the printer using the wired method.

  He told me that the rules of traffic incoming and outgoing firewall stopped communication between devices and assign port numbers 427-9000 etc.. However, I had turned off all firewall, Windows and Norton 360, which since then, I've replaced with a better anti-virus software.

  I went into the settings of the router, port forwarded the application numbers, tried again and is again no luck. I'm usually pretty good with computers, but it was really annoying me. So I went and had a coffee and a brainwave came and I decided to see if my laptop could detect and connect the printer to the router. As soon as I tried it, he finds and the printer has detected immediately.

  Then I thought there must be something on my laptop to friends who may be at the origin of the problem, when I looked, I noticed that my friend had the old software Vodafone Mobile Broadband running in the background which was connected to the router.

  So I closed and turn it off and tried again adding printer. SUCCESS now detects it and the printer is now communicate and respond with the laptop. I'm guessing that the Vodafone Mobile Broadband have a built-in firewall blocking the communication. However it is strange because it worked without problem on my printer at home, so I wonder if some how blacklisted broadband Vodafone IP address of the printer at a time on their router.

  I'm so happy, it's finally done, a lot of hours and work, and after all this time it was * beep * Vodafone.

  in any case Pcwizard I thank very much for trying to help, no doubt has given me a few ideas.

  Thanks again!

• iMac connects to the router of Linkysys WRT1900ac

  I am trying to help a friend get his iMac 12.1, that is running 10.11.4, to connect to a new Linksys WRT1900ac router.  The router is a novelty in this House, is in the same room of 10 x 12, as the computers listed below, and the installer was using the Linksys recommends the method, which is to let the Linksys to make adjustments.

  Here are its configuration;

  The router is connected to a cable modem, ISP and the following devices are connected to the router and works well;

  Via ethernet

  Windows 10 PC

  AT & T cell phone extender

  Ooma VOIP

  Wireless

  iPhone

  iPad

  Notebook PC

  While troubleshooting my MacBook 5.1 also allows to connect without problems to the Linksys router.

  Note that her iMac connects without problem to the wifi network Netgear Guest unprotected from its neighbor.  I also installed in his room my 1st generation Airport Express, which has added a second wifi network but without access to the internet and his iMac connect without problems to this wifi.

  Here are the steps I took to try to solve this problem, and they were unsuccessful;

  ➔ Scanned for malware/adware with Malwarebytes and found nothing.

  ➔ Ransacked after the files in/Library/Preferences/SystemConfiguration and restarted

  com Apple.Airport.Preferences.plist
  NetworkInterfaces.plist
  Preferences.plist

  ➔ When the previous did not work I trashed all the files in the folder/Library/Preferences/SystemConfiguration except "com.apple.boot.plist', which would not remove and rebooted

  ➔ Created a second user account and still not able to connect to the Linksys router

  ➔ Repaired permissions

  ➔ Created a new location in System Preferences > network and added the OpenDNS addresses and in the material value MTU 1453

  ➔ restarted in safe mode and not still could not connect

  Firmware on the router Checked ➔, which is updated

  ➔ Reset SMC

  ➔ reinstalled El Capitan via the App Store

  That's all I could think about.  I'm puzzled.

  I checked the router and everything seems ok, but I'm no expert.  There may be something I'm not contagious.  I have seen that he has no MAC filtering set up in the router, so this isn't everything.

  Please tell me if there is something that I'm on.  Is there something in the router, that I need to change?  There are other files in the Mac, I need to delete?  Is there any other troubleshooting steps I can take to identify this problem.

  Any help would be appreciated as it is a total mystery to me.

  There are a lot of variables, but start with some basic info. So on her iMac, if you click the wifi at the top right, you can see his router listed?

• I have Mozilla Firefox on my computer and I am trying to go to a Web site, it tells me that Windows has blocked the Web site.

  Original title: Windows has blocked a website!

  I have Mozilla Firefox on my computer and I try to go on a site that I need to go to desperately for school work and it tells me that Windows has blocked the Web site.  How do the Web site and how to unlock the problem?

  Hello
   
  1. what happens when you visit the same Web site using Internet Explorer?
  2. what operating system is installed on your computer?
   
  Given that it is a problem with Mozilla Firefox, you can contact Mozilla for better assistance.
   
  Here is the link: http://support.mozilla.org/en-US/questions/new
   
   

• I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green.

  I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green. Of course, the drivers are missing but whom?

  original title: IPConfig and lack of internet access

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, starting with the card mother/chipset drivers.
  LAN, Audio, USB, SATA, etc, and so on.

  Note: If there is no XP driver listed, then your computer is not compatible Windows XP.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  =========================  IpConfig ===========================

  Open a command prompt window and type these two commands in the following
  order:
  (1) ipconfig/release
  (2) ipconfig / renew

  J W Stuart: http://www.pagestart.com