RV220W. Problems LAN WLAN <>-

Similar Questions

• EliteBook 8460p: at the same time LAN &amp; WLAN using problem

  Hello

  I can't use my elitebook 8460p network (LAN), Wireless Network (WLAN) and local at the same time. Both are well configured. The sequence is that when I connect the official LAN in the laptop cable, existing wireless network automatically becomes invalid. If I unplug the LAN, WIFI will automatically connect to the network. Why this is happening, I don't know. Please, help me.

  Info:

  * windows 7 Professional 64-bit.

  * If I press the key again wlan connection both LAN and WLAN, it does not work and will automatically reconnect if the network cable is unplugged.

  I know this isn't OS related issue. I know well on the network configuration. It is the first case and applies only to this model (here 8460p). If there is any related issue of BIOS, please help me. I developed, but not found.

  Help me, please.

  Hello:

  There is a setting in the BIOS called LAN/WLAN switching.

  The setting is enabled by default.

  If you want to have the wireless and ethernet, working at the same time, go into BIOS, find and disable the LAN/WLAN, commissioning, save the changes and exit the BIOS.

• My LAN/WLAN icon says that I am not connected, when in reality I'm...

  Hello

  My question is on an Inspiron 14R with win 7... "My LAN/WLAN icon in the taskbar indicates that I am not connected with a red circle and a slash through it, when in reality I'm.  What do you think is the problem? because when some of my programs to update run I suppose that they just use a signal as to if there is no internet activity and download, but because of this problem my computer will not update...

  Thank you very much for you help in advance...

  Kind regards

  NOSCivic

  Hello

  Check this artivle KB to see if it applies.

  After you wake a Windows Vista-based computer or a Windows 7 computer
  standby or Hibernate, the network icon and the icon in the notification area speaker do
  does not show the correct state
  http://support.Microsoft.com/kb/937477

  -----------------------------------------------------------------------------------------

  You mean that icon Notification network near the clock in the lower-right?

  Right-click on the icon - problems.

  Also, there is an Animation setting it (probably not here), turn off then back on (twice).

  =============================================================

  Do a 1 Restore Point then you can go back to where you were if necessary.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.
  
  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Do
  It will be the same for network (NIC) card - then right click on the devices and UNINSTALL - Reboot -
  update the driver stacks.

  Now go look at the site of the manufacturer of the system for the updated drivers.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  Repeat for network (NIC) card and is a good time to get the other updated drivers in Windows 7
  love the updated drivers.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967/en-us

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -----------------------------

  Allow you to reset your TCP/IP stack just to make sure:

  Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  ----------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - left side, click on manage wireless networks
  -Right-click the networks - Remove - REBOOT. Start - Connect To - connect
  on the network.

  ---------------------------------

  Other tips:

  If you are using a wired cable-
  Panel - Manager of devices - adapter - (NIC) - double click on the Advanced tab and set them
  "Speed & Duplex" 10 Mbps full duplex and try 1/2 duplex. Be sure to APPLY / OK. Maybe some
  help here: (don't forget the answer is complex, because there is probably more than one thing causing)
  the question)

  Others.

  http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

  http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

  http://www.annoyances.org/exec/Forum/WinXP/1109372091

  There are many causes, one of which is the small monitor pays attention to the evil network device.
  You can try to disable any other network such as WiFi device and reboot to see if that has an effect.

  Still a problem of equipment such as a loose network card that is not properly attached to the computer can
  cause this.

  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• su hppsc1350series storage LAN win7 64 bit - non stampa da win xp in o rete LAN WLAN

  The stampante e' collegata USB known STORAGE in rete LAN e installata da HP Pavilion dv6 win 7 64 bit

  In rete LAN WLAN o another laptop with win xp 32 bit non trova I have drivers used e con I add stampante stessa viene dal sistema my al momento di add xp vista driver non trovo he adatto .inf file.

  I con sistemi win 7 64 bit in rete non ho nessun problema di stampa.

  5s suggerimenti risolutivi. Grazie

  The printer ' connected to USB storage and LAN installed by HP Pavilion dv6 Win 7 64 bit
  In the LAN or WLAN to another laptop with Win XP 32 - bit drivers cannot find suitableprinter and add that the same system is considered by xp but when to add the drivers can't find the fichiers.inf. Adapted.
  With Win 7 64 - Bit systems on the network, I have no problem printing.
  I look forward to suggestions. Thank you

• Desktop HP ENVY h8-1569 - Windows 7 64 bit drivers for LAN/WLAN

  Hello

  This PC came with Windows 8 is installed and I was asked to go back to Windows 7 64 bit Pro.

  I began stupidly (wiped everything), installed Windows 7 64-bit, only to find out I do not have any network (LAN/WLAN).

  Looks like I need the 64-bit driver for Windows 7 for the Atheros AR8161L (only required WLAN - found driver LAN)

  Correction: I found this http://www.qca.qualcomm.com/drivers/AR813x_AR815x_AR816x_v2.1.0.21_WHQL.zip which corrects the LAN now I need to find a solution for the WLAN.

  I found similar positions, but they lead to pilot installations will fail.

  Any help would be appreciated.

  Thank you

  Marco

  Hi, Marco:

  Here are links to the drivers you need:

  Install this driver first and then restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-105638-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5292673 & sw_lang =

  (2) BCM20702A0:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-106757-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5292673 & sw_lang =

  (3) network controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-106741-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5292673 & sw_lang =

  (4) controller universal Serial Bus (USB):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-111473-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5292673 & sw_lang =

  If you need to reinstall Windows 7 x 64, you can use all the drivers and the software of this model, which is where I got the drivers from above.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us & DLC = in & LC = on & os = 4063 & Product = 5292673 & softwareitem = CP-111473-1 & sw_lang =

• EliteBook 820/840 G3: EliteBook 820/840 G3, Windows 7 Enterprise x 64: LAN/WLAN, switch does not

  Unable to get LAN/WLAN switch to work. The setting is enabled. The LAN WLAN connections and remain active at the same time.

  G3 EliteBook 820 and 840 G3

  Windows 7 Enterprise 64-bit

  BIOS is updated (01.07 Rev.A (June 6, 2016))

  All the drivers are up to date as of today (2016-06-23)

  Have reset to the default values for several times.

  Without success.

  Any idea?

  TIA & BR

  If you install the HP Hotkey support 6.2.18.1 Rev.A. then it works

• Satellite A100-036: need WXP video, LAN, WLAN driver

  Satellite A100-036: need WXP video, LAN, WLAN driver
  SASA. [email protected]

  Hello

  Satellite A100-036 is a part of the series PSAANE;
  Go to the page of European Toshiba driver and choose the PSAAN A100.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  You will find all readers for your laptop ;)

  Good bye

• You will need to reconfigure the LAN WLAN settings in the Windows XP machine.

  Original title: LAN WLAN Configuration.

  I just did a cover on my hp nx6110 and I was able to get windows xp up and running again. But when I tried to do my job of Lan or Wlan work again once I was told by my ISP that I need to reconfigure my Lan and Wlan on my laptop. Is it possible that I can get information for this instead of bring my laptop to a professional, because this computer is already 5 years and more under warranty. Or is it available by download on a USB stick and transfer it to my new computer to the hp nx6110?

  Hi JohnJacobi,

  You can follow this link and check if it helps.

  To make a connection to the local network

  Hope the helps of information.

  Please post back and we do know.

• Limited with connectivity cable LAN & WLan after Win and IE7 update

  Hi all

  It's now 2 days I'm trying to fix a new bug on my Satellite P100. I don't know if it's related, but yesterday I received the automatic installation of IE7 and KB (914440 and 915865).

  And since restarting my computer can't connect to the network or the ethernet cable or wifi on. The network is present, but the computer never gets an IP address from my router and dhcp. I have another computer works well on this router.

  When I use configfree util and attempt a repair, I have a gel.

  I have now to uninstall IE7 and the two KB, zonealarm. But still no change, I always have this connectivity limiting or didn't exist do not.

  You have any ideas on what I could test it?

  Thank you very much in advance
  Phil

  Hello

  Hmm. have you tried reinstalling the drivers LAN and WLan?

  I found some nice tips in the internet, it seems that some MS updates could have a bad influence on some drivers or change registry entries and so system problems may appear.

  That the Lan card did you use? Intel? On the page of the Toshiba driver I found tosh lan driver and intel driver lan so if you use an Intel card you can also see the Intel Web site for an update...

• How to Segment LAN/WLAN with TimeCapsule and third party LAN

  Hello

  I have a bit of a delicate situation. I need to speed up my (W) LAN through segmentation and hope that many of you might be able to help here.

  Currently my TimeCapsule connects via its WAN for a FritzBox with DHCP port. 255.255.255.0 subnet / host 192.168.178.1 TC router is turned off (bridge mode). The TC creates a wireless network. The FritzBox connects to the ISP and a lot other customers outside the TimeCapsule.

  The first WLAN TimeCapsule is extended by a second TimeCapsule. A couple AppleTV and expresses the airport are connected in the scope wireless of the 2nd TimeCapsule but far out of reach for first time capsule. Apple network and FritzBox network clients need NOT communicate with each other. It will be even better if they were aware, because there are other AppleTV, printers, servers UPnP, stream movie, etc.

  Thus, the 2nd TimeCapsule acts as a 'bridge' for the internet.

  Now, I want to segment the LAN (W). The main reason is to reduce traffic. The two TimeCapsules to connect with a very low bandwidth, because there are a whole bunch of concrete between the two. Since then, there are a LOT of current traffic, customers and also the internet connection around my TimeCapsules is not responding to most of the time.

  Is it possible to segment the LAN (W) with my first TimeCapsule and create a LAN (W) dedicated?

  Thank you very much for your help!

  I think that you need good QoS or limitation if I read your message.

  Give me real numbers.

  What is the max download and upload becomes your Frtizbox? Many real world real... using ethernet for the Fritzy and anything else using the bandwidth.

  The first link to the TC1 on ethernet should be no problem... but the TC2 wireless link is probably give you mediocre results... and there is very little you can do about it... have you tried or considered using adapters EOP. (homeplug to the United States).

  If you take the link that will help you.

  Segment the network's not going help the problem that I see.

  What model is the Christopher? Is there a QoS limitation or even decent with the limitation of bandwidth?

  You can set IP alias or VLAN on that?

  What model is the TC?

• S205 problem - poor WLAN Wireless

  Does anyone have any experience with bad reception WLAN? Only directly next to the WLAN router at a distance of 1 m WLAN works. Other wireless networks do not appear in the WLAN list, with other computers laptops and androids several wireless LANs are recognized. Maybe it's a software problem, but I fear that there is a physical problem with the WLAN antenna. Can anyone help with this?

  I operate my S205 (Atheros 9285) with Win7 64 bit Home Premium, it was initially installed.

  Thanks to boooogy in the meantime I also replaced the atheros by intel 6200, now it works perfectly, bios section was not really a problem)))
  the atheros card is rubbish, not usable, simply amazing...

• RV220W problem

  Hello

  once or twice a day, stop router works for 2 minutes (no LAN, no internet and no access to the administration console).

  That's what I got from the journal:

  Sat Jun 11 13:25:59 2011 (EDT) [rv220w] [System] [PROGRAM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 9 dot11STA 1 has failed. status =-1

  Sat Jun 11 13:25:59 2011 (EDT) [rv220w] [System] [EVTDSPTCH], umiIoctl (18, UMI_CMD_DB_UPDATE (4)) failed. table = dot11STA line = 1

  Sat Jun 11 13:25:59 2011 (EDT) [rv220w] [System] [PROGRAM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 1 has failed. status =-1

  Sat Jun 11 13:25:59 2011 (EDT) [rv220w] [System] [EVTDSPTCH], umiIoctl (18, UMI_CMD_DB_UPDATE (4)) failed. table = dot11STA line = 1

  Sat Jun 11 13:26 2011 (EDT) [rv220w] dbRecordValueGet [System] [PROGRAM] failed for LogicalIfName column

  Any idea?

  Thank you

  Marc,

  Create a separate SSID for your android and play with the type of authentication and encryption type to find the best solution available for yourself. Let us know what works for this phone model; Also post the model of your phone as well. I have a DROID X and that you do not "had any problems yet, but I know others who have."

  Thank you

  Jasbryan

  Support Cisco engineer

  .:|:.:|:.

• VPN IPSEC RV220w problem

  Hello, I hope someone can help with my problem.

  I have a RV220w in the office, I set it for ipsec vpn connections. Behind the router, there is a NAS for file storage.

  My setup as follows:

  RV220w 192.168.1.1 with dyndns, configured for ipsec vpn with default Client strategies.

  Remote location (my laptop) local IP: 192.168.3.2

  Remote site VPN IP (given by ShrewVPN): 192.168.30.5

  I managed to connect to the router at home with ShrewVPN and I can ping each client connected to RV220w.

  The problem is that I can't connect to the web interface of the router or the NAS web interface or any other web page intranet (the browser gives no error, but continues to load without displaying the web page). Even if I can access the web pages of my laptop.

  In addition, in windows Explorer when I log into the NAS, although I can go through the files, I can't copy the files from my laptop on the NAS and vice versa, I still get timeout error (I checked the permissions on the NAS and also I managed to copy a txt file small 1 KB) (, but no luck with large files).

  I also tried with QuickVPN client, but I got the same results.

  When I connect with pptp windows everything works like a charm.

  My laptop has windows 7 64 bit.

  If you need other configuration details, please advice.

  Thank you

  Hi Spyros, one of the differences between IPsec and PPTP is that IPsec requires the client that connects to use another LAN IP address, when you connect. Unlike PPTP, it is assigned by the router.

  Another difference is that the requirement of bandwidth is much higher for IPsec connections.

  I don't think it's a problem of IP subnet as you are able view readers to all least, then it means that the unit can accept connections from different subnets. But it is possible, it may be a problem of download speed. QVPN needs Mbit upload environ.5 to have an activity and a reliable and quality connection.

  Another problem may be a matter of downtime with IPsec encryption. The RV220W has a non routable WAN address. This suggests to me that you have another router upstream. Time to answer through the IPsec tunnel can be volatile because of the translation through multiple jumps.

  -Tom
  Please mark replied messages useful

• Problem connecting WLan on Satellite A60-186

  I have a problem with Atheros AR5004g wireless network card on my PC since I bought it.
  The problem is that if I try to connect the PC to any WiFi network that is found in the 'network' the system startup list to try the connection and write me this message: ' Attesa disponibiliti¿½ rete in corso "or... in the meantime translated"the availability of the network. but the connection never starts.

  But... and it's funny... If I set up as manual connections of the "network list" a set up as the only automatic connections (e.g. access point) and I turn off the access point I can see it disappear in the form of the "network list". If I turn on once more and click on update network list, the wireless connection to the access point will automatically launch. The IP address and DNS address are automatically given to the system and it starts to work. But if I close the connection I can not connect once more (unless I'm not the same game).

  The thing is that:
  -l' wireless adapter works (it doesn't is not out of the question use should not function even with 'games')
  -I can not connect to any network 'normally '.
  Can someone help me understand what the problem is?
  Is it possible that I need to update the wireless adapter driver?

  Thanks in advance for your help.
  Ciao

  Hello

  Your ad is a little confusing.
  You do not write on the connection. Have you used the windows WLan configuration or the Atheros WLan utility?
  I advise to use the Atheros Wlan utility to configure the WiFi connection, because it is an Atheros Wlan card.
  Of course, you can also check the availability of updates. If the new driver has been on the Toshiba site so you can try to install it.

• Need of WXP LAN/WLAN drivers for my Satellite U400

  Hello

  I've been running XP on my U400 for these past few months with no problems. Freshly installed XP yesterday due to a few bugs, the same installation with SP3. All XP drivers that I've used before, but now the Realtek WLAN driver is not recognized. The network driver worked at first, but now it says network cable unplugged when it is clear to anyone with eyes that he's right there!

  Just to be on the safe side, I even tried the drivers Intel and Atheros, but natch they don't work. Can't even manually install the driver in the Device Manager as Windows says it can't find the right software despite me pointing right there. I tried the driver from the Realtek site too with the same results.

  Anyone know what I can do?

  What with all the other problems I am experiencing with this machine, I'm starting to think that I made a bad choice. :-(

  Anyone had this problem? See, if Toshiba had done his work and status of downgrade XP discs as they are supposed to, we wouldn't have this problem! Someone has to have an idea of how this can be resolved, surely?