S - Video capture with Premiere Elements

Similar Questions

• Lag/rendering with Premiere Elements problems

  During my studies, I was with Premiere Pro, with whom I could work (though I've always been under the impression that I'm playing with a little more than the tip of the iceberg). After leaving University, I looked out for another video editing program, and since most of the comments stated that Premiere Elements has been a good choice for non-professional video editing and certainly adequate for everyday use. So, I got a copy of PElements, which was pretty cheap compared to its big brother.

  However, after trying to edit two videos in one (the same scene taken with different cameras), I must admit that I am a little disappointed.

  The biggest point of contention is the terrible lag. Agency was already overwhelmed by the people, but they did not nearly unworkable program. Then I started to make the two video tracks, that would take about 4 hours for a simple 11:30 (2 x) minutes of video material.

  I used the following for this system:

  Intel Pentium Dual CPU E2180

  2 GHz

  4 GB of Ram

  Windows 7

  32 bit

  Video files, that I worked with were already changed to Avi using the following conversion programs converted camera cassette versions (I had to convert because for some unknown reason, my old Premiere Pro has refused to work with AVCHD or vlc.tod - files, so I did not worth to try it here).

  Free Video Converter V3.0.0.0 (Koyote Soft)

  Output Avi Format

  MS-Mpeg4-V2 codec

  Any Video Converter (MPlayer)

  Output Avi Format

  Mpeg4 codec

  So, my question would be: is this normal? I guess, if anything, items would be faster than Pro because it is less complicated, but appearently I was mistaken. What is the reason - is the obsolete system, do I have to use special presets for a video clip or is the format of data file I used to blame for either or both of my problems?

  (other questions are cut-editing tools and color are much coarser than those of the body, but I guess this is intentional)

  Your gun shoots in a variety of formats. If you want to edit in Premiere Elements, you should shoot only in MXP or FXP mode. (Leave the Everio out of the mix for this part of the experiment, since these cams have their own unique challenges.)

  You should then beyond a Premiere Elements project using the project settings for stereo 1920 x 1080 AVCHD full.

  Use the elements first get the media / Flip and AVCHD camcorder to import video from your camcorder to your computer and place the video on the timeline. You should not see red lines above clips. You should also see pretty good performance when you work with it.

  Also, your computer may be low power to work with this type of video. Hi-def video can take a long time to render, particularly on a dual-core computer. But converted to a different format using another program will not improve things a lot unless you know for sure your perfect product converter Type 2 DV - AVI.

  In fact, you can produce a Type 2 DV - AVI from this video AVCHD with Premiere Elements. Just place your AVCHD videos on this once and then go to the action/computer/AVI and select it as the DV PRESET. The video it produces should work very well in a project set up for widescreen DV. It will be the standard definition rather than hi-def - but, if you plan out your last video in standard definition (for example, online or on DVD) you might as well work with it in this format.

  But as I have described above as your experience. Try not all high-end and do not mix the Everio format in your project again and see if it improves things.

  Once find you a clean and efficient workflow that works with the best video formats, you should see a significant improvement in performance.

  But for now, stay away from third-party video converters. They seem to be working against you.

• Incoming audio levels can be adjusted for digital video capture in Premiere Pro?

  Incoming audio levels can be adjusted for digital video capture in Premiere Pro?  Or is the audio in digital images a fixed entity that cannot be adjusted once it is imported into an editing software?  Recently, I have captured 14 hours the Strip that constantly weak but usable audio levels.  I couldn't see a way to set audio levels in the capture Panel, so I just left with just the default settings.

  It is possible that the lessee of his experience on the production has been conservative with its levels; they constantly peaking at nearly 9 meters of first, instead of more desirable 12.  But because they are so compatible, I wonder if I missed an option to set audio capture of levels when I did the band.

  The levels are defined. In the way - 9 on the first meters are stronger than-12

• Any advantage of using Photoshop with Premiere Elements (instead of Photoshop CS4)?

  Soon, we are about to buy a Mini-DV with Premiere Elements camera. We currently have Photoshop CS4. Question: Is there a technical advantage to buy a copy of Photoshop Elements and Premiere Elements? Are there specific tools in Photoshop Elements that would make video editing more easy than using Photoshop CS4? Thank you.

  The biggest advantage to using Photoshop Elements with Premiere Elements is that you can transfer some projects — namely slideshows - from one to the other. In other words, you can start a slide show in Photoshop Elements, and then send it to Premiere Elements for the finishing and DVD release.

  But, if you have CS4, I wouldn't bother with Photoshop Elements otherwise. It will feel like a toy compared to the pro version.

• How can I export 2.7 video k with 13 elements?

  How can I export 2.7 video k with 13 elements?

  Sergio A Almeida

  What is the resolution of your video 2.7 K (2704 x 1524?) and what you want in the way of export

  Size of the image

  Frame rate

  Video compression

  Audio compression

  File extension

  I can give you how specific with what precedes.

  Otherwise, I'll tell you that you will do a selection Publish + share/computer with preset and then customize the preset

  under the button/video Audio preset and advanced tabs. But here's what publication + share/computer/AVCHD with preset MP4

  H.264 1920 x 1080 p 30 custom 2704 x 1524 @ 29.97 progressive frames per second in the advanced key/video label.

  

  We will follow for details to help us.

  Thank you.

  RTA

• with Premiere Elements, how share (export) part of my video, not all this?

  Using Premiere Elements, how share (export) part of my video, not all this?

  carol2r

  What version of Premiere Elements you are using and on what computer operating system is running? For now, I will assume first elements 12 on Windows 7, 8 or 8.1 64bits.

  1. place the grey bar activities tabs so that they cover all the timeline content that is to be exported.

  To position the grey legs... Move the indicator of chronology for the beginning of the segment to be exported, you hold down the Alt key, press the [key left hook

  .. [then move the indicator in the timeline to the end of the segment to be exported, you hold down the ALT key, press the right bracket]

  2. the other necessary part of this task is for you to have a check mark next to the option "Share activities Bar only" as part of the export. See publish + share/computer /... Most have the option "Activities part only", some do not.

  Don't forget, you need 1 and 2 of the above to make it work.

  Please provide more details for fine adjustment of the replica. If screenshots are needed, I will post them.

  Looking forward to your follow-up to the top.

  Thank you.

  RTA

• Sony HDV undetect with Premiere elements 13

  [ENGLISH VERSION]

  Hello

  
  

  Before, I used elements of first (EP) with Windows XP for a few years and everything worked perfectly.
  
  Unfortunately, I had to to upgrade my computer to Windows 7 and PE encounter some problems (error code [..- CBC- CAManager.cpp-884]) and I can't use it properly.
  
  So I decided to upgrade for the version 13 and I bought it. Installation is complete like a boss and there is no problem. However, I have cannot acquire My videos as with version 7 because my camcorder has not been detected.
  
  My camcorder works perfectly and the acquisition works with Movie Maker and first elements version 7.
  
  I am the owner of a camcorder Sony HVR- S270E and I use Windows 7 edition 64-bit.
  
  You have any solution in order to to get My videos with the version 13 of First elements ?
  
  Thank you to help me,
  best regards

  
  

  [FRENCH VERSION]

  Hello

  I used elements of first (EP) with Windows XP for a few years and everything worked perfectly.

  Unfortunately, I had to upgrade my computer to Windows 7 and PE encounter some problems (error code [.. \Src\CAManager.cpp-884]) and I can't use it properly.

  I've decided to upgrade to version 13. Symposium of the installation went well and there is no problem.  However, I can't acquire my videos as with version 7.

  My camera works perfectly and acquisition works with Movie Maker and v7.

  I have a camcorder Sony HVR-S270E and plug-in Windows 7 64 bit home.

  Do you have a solution in order to make the acquisition of my videos with the elements first 13 version?

  Thank you for helping me to come from en,

  Best regards

  Version 13 capture is more than one camera to tape

  http://helpx.Adobe.com/premiere-elements/KB/removed-features-formats-elements.html

• Quality of frame rate is low when my Xbox has recorded video on Adobe Premiere elements 13

  Whenever I try to import a record Collection Master Chief, it comes out all the glitch in the search. I record with my HD PVR 2 games Ed Pro at 1920 x 1080 p 60 FPS, but with this capture card, it is able to record to it, but then falls the FPS up to 30 images/s after you save the file.

  The video is seem to have problems with the framerate. When I look at my images recorded on Windows Media Player, it plays very well. No no tear, no problems with the pace. The fades of when you die to the screen goes black and then spawn yours isn't looking for lag. But when I put in the first 13 items, quality decreases enormously.

  I have visited several page layouts. I tried. 1920 x 1080 p MP4 and YouTube HD 1920 x 1080 p 30 fps. None works well. Even after doing a quality test and download to YouTube to see if that fixes it, it still has the problem. I also tried to lower the FPS, and none of them does not seem to work.

  I was told that it had to do with the fact that Adobe can't handle 60 FPS, but when I got the trial he worked for Forza (running 1080 p 60 FPS on Xbox as well). The only other video I tried so far on my purchased version is The Crew, but running at 30 FPS.

  Computer: i7 4710 2.50 GH/z laptop, 16 GB RAM, NVIDIA 850 M

  Video editing: Adobe first Elements 13

  Recorder: HD PVR 2 Gaming Pro Edition @ 1080 p/60 fps on a .mp4 file

  Video with questions: https://www.youtube.com/watch?v=dtpf7R4aq9w[1]

  In addition, another problem is that the audio is disabled. But it's something else that I don't notice after registration. It's as if the software can not handle this record at all. Can I get a refund from Adobe (I bought at a discount of $30 about 2 weeks, return on their website) and get their latest version? Although I don't really want to get a monthly test. Or I have to change the settings in my recording studio?

  CarbonCamaroSS

  You can make a copy of the original project and see if what follows is a quick way to the question...

  Click on the file where you have your video and audio related and select unlink video and Audio on the shortcut menu.

  With audio selected, hold down ALT on the main keyboard to the computer, and press the arrow key right or left. Each tap of the arrow will push the audio 1 frame. If you press the Shift + Alt of the main keyboard to the computer and press the right or left arrow key once, every tap of the arrow will push the audio frames 5.

  RTA

• How properly I crop a video in Adobe Premiere Elements 10?

  I'm trying to harvest and videomerge several video clips for Youtube covers, and I got regarding the videos of 4 of the 5 videomerging and cultures. The average video gives me a lot of trouble since I have cropped it much and adding videomerge causes small videos being blocked by the blackened parts of the average vid. I'm so confused! I just want videomerge cropped area, not the entire video. Is it possible to crop it properly so that the video borders are ONLY on the cropped area (see second pic for example)? Right now, video borders currently resemble the first photo.

  I was able to get the borders around the culture for the second picture by clicking on the tab of harvest in "edit effects". However, he returned to the first photo as soon as I try to do something with the vid.

  In addition, I apologize for your question on the elements in a Premiere Pro forum. There is no option for a Premiere Elements forum :/ You can do what I'm trying to do with Premiere Pro? If I can't find a solution and Pro cultures it correctly, I could try to upgrade.

  Thanks to anyone who can help!

  -Tera

  

  Just happened to me on the effects rendering order. Don't know if elements give you tree/layer effects, allowing you to move effect upwards or downwards in order, but if moving, the effect of merger below the cropping effect can issue.

  First renders the bottom layer first and then makes the layer above it and it superimposed makes the top layer and layer it on top and so on. For effects, first returned in each layer of the top to the bottom.

• Free disc of Premiere Elements with the new camera. Installed on the pc and have shortcuts for items and items first. The serial No. work with Premiere Elements, but not Photoshop Elements. Why is this?

  Hi, I'm new to this bear so please with me. I have a free disc of Premiere Elements with a new canon camera and install it on my pc windows 8.1. After installation I have a shortcut for first elements and a shortcut for the elements, I guess that first for the video and photo elements. The drive came with a serial No. who worked with first, but when I opened elements, he asked for a serial No. but when I tried the same series only.  It says this serial No. is not valid for Adobe photoshop elements. I'm something wrong, I am missing a serial number, do I have to pay to use the side elements (photo editor), and if so I don't understand why he loaded the two programs on a disk I thought it was a big split in video and photo program.

  Help, please.

  Photoshop elements and first elements are two different programs (as you know).  they have different serial numbers used to activate them.

  If you were supposed to get both with your camera, you should have two serial numbers: quickly find your serial number

  However, is it possible that you had only to get a serial number of elements first and photoshop elements was provided as a trial (to see if you want to buy a serial number)?

• Date and time do not appear on the video captured in first Elements 9.

  Is it possible to get the timestamp to show up on the video captured from an older model mini Sony TRV18 camcorder DV?

  I can see the stamp date and time during playback of the video from the camcorder, but no time stamp appears in the clip mode capture first, or on the captured AVI file.

  I have the first Elements 9. If it is not possible in first 9, any suggestions for capture software where can I get the date stamp and time would be appreciated.

  TKS.

  This isn't a feature or a Premiere Elements.

  However, you will be able to your video using a program called DV Date stamps.

  http://Paul.glagla.free.fr/dvdate_en.htm

• Sony HDR - HC9 problems with Premiere elements 9

  If I have problems getting my HDV camcorder recognized by Elements 9.

  When setting up my project I choose the correct settings to my knowledge (PAL HDV 1080i 25) but when I go to import media from him he told me there is no connected equipment. It is found in the regular DV section but not in the HDV format.

  When I set it up to be a DV project it has no image on screen when importing media (probably because it is recorded in the HDV format)

  I am only using the trial version to make sure that it aorks all before you buy. I would like to use this software, because that's what I've used in the past, with older cameras etc.

  Someone knows how to solve this problem, or what may be the problem?

  You mentioned that Premiere Elements recognizes your camera when get you the DV camcorder media, correct? This means that your camera in the camera settings are on DV instead of HDV.

  You can check this by going to the options in the menu of your camera, then switch to set camera and check the settings of the video recorder. It should be instead of DV HDV.

• Video capture with windows movie maker capture 16:9 dv camcorder.

  My Canon DV camcorder using Windows Video Capture video capture is not capture video in 16:9 format, 4:3 looks like. Why?

  Hello

  Thanks for posting your query in the Microsoft Community Forums!

  If I understand you correctly, you have a problem with the video capture from a camcorder DV Canon using windows movie maker. I understand it must be frustrating, but don't worry, we're here to help solve your problem and guide you in the right direction.

  The proportions of the original video on the videotape. Depending on your DV camera and the camera at the time settings wherever you saved the original video tape, your video can be recorded to an aspect ratio of 16:9 (wide screen) or 4:3 (standard). Choose a video format and a report l / h in video import, which is the same as the video recorded on tape.

  For more information:

  Video import settings: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows-Vista/video-import-settings-frequently-asked-questions

  For your reference:

  Troubleshoot importing video problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/Troubleshoot-importing-video-problems

  Import video from a videotape

  http://Windows.Microsoft.com/en-in/Windows-Vista/import-video-from-a-videotape

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Cannot import. Files MOV with Premiere elements 12: generic error. With the help of Windows 8.1 (64B)

  This issue was already on the forum for the old version first and windows. I'm doing my videos (.) MOV format) with the digital camera Casio EX-ZR400.

  I have no problems with Photoshop elements 12 films produced by this camera.

  The problem was resolved after the download and installation of Apple Quicktime that was not on my PC :-)

  I can import. MOV files now :-)

• Capture with premiere pro cs6

  Hallo,

  I use first pro cs6.

  My problem is the DV capture,

  Because my JVC GY-HD101 camera work with miniDV en I use to capture Panasinic NV-GS500

  Capture programs that work smoothly with premiere pro?

  Thank you

  It is a known issues with capture on the latest version of CS6.

  Return to 6.0.3.