Sony HDR - HC9 problems with Premiere elements 9

Similar Questions

• Problem with Premiere elements 8

  Hello

  I have the software components of Adobe Premiere and I have a problem.

  Yesterday, I tried to start a new project in the Welcome screen and all of a sudden, nothing happened.

  He said only the launch of new project and after 30 seconds he spent and nothing's happened, but earlier this week, I edited something with the software.

  I tried to reinstall the software, it has not helped.

  How can I solve this problem?

  Thanks in advance

  It could be that the licensing has been corrupted. The frequently asked questions to the right of this forum to offer this solution.

  http://forums.Adobe.com/thread/542377?TSTART=0

• Lag/rendering with Premiere Elements problems

  During my studies, I was with Premiere Pro, with whom I could work (though I've always been under the impression that I'm playing with a little more than the tip of the iceberg). After leaving University, I looked out for another video editing program, and since most of the comments stated that Premiere Elements has been a good choice for non-professional video editing and certainly adequate for everyday use. So, I got a copy of PElements, which was pretty cheap compared to its big brother.

  However, after trying to edit two videos in one (the same scene taken with different cameras), I must admit that I am a little disappointed.

  The biggest point of contention is the terrible lag. Agency was already overwhelmed by the people, but they did not nearly unworkable program. Then I started to make the two video tracks, that would take about 4 hours for a simple 11:30 (2 x) minutes of video material.

  I used the following for this system:

  Intel Pentium Dual CPU E2180

  2 GHz

  4 GB of Ram

  Windows 7

  32 bit

  Video files, that I worked with were already changed to Avi using the following conversion programs converted camera cassette versions (I had to convert because for some unknown reason, my old Premiere Pro has refused to work with AVCHD or vlc.tod - files, so I did not worth to try it here).

  Free Video Converter V3.0.0.0 (Koyote Soft)

  Output Avi Format

  MS-Mpeg4-V2 codec

  Any Video Converter (MPlayer)

  Output Avi Format

  Mpeg4 codec

  So, my question would be: is this normal? I guess, if anything, items would be faster than Pro because it is less complicated, but appearently I was mistaken. What is the reason - is the obsolete system, do I have to use special presets for a video clip or is the format of data file I used to blame for either or both of my problems?

  (other questions are cut-editing tools and color are much coarser than those of the body, but I guess this is intentional)

  Your gun shoots in a variety of formats. If you want to edit in Premiere Elements, you should shoot only in MXP or FXP mode. (Leave the Everio out of the mix for this part of the experiment, since these cams have their own unique challenges.)

  You should then beyond a Premiere Elements project using the project settings for stereo 1920 x 1080 AVCHD full.

  Use the elements first get the media / Flip and AVCHD camcorder to import video from your camcorder to your computer and place the video on the timeline. You should not see red lines above clips. You should also see pretty good performance when you work with it.

  Also, your computer may be low power to work with this type of video. Hi-def video can take a long time to render, particularly on a dual-core computer. But converted to a different format using another program will not improve things a lot unless you know for sure your perfect product converter Type 2 DV - AVI.

  In fact, you can produce a Type 2 DV - AVI from this video AVCHD with Premiere Elements. Just place your AVCHD videos on this once and then go to the action/computer/AVI and select it as the DV PRESET. The video it produces should work very well in a project set up for widescreen DV. It will be the standard definition rather than hi-def - but, if you plan out your last video in standard definition (for example, online or on DVD) you might as well work with it in this format.

  But as I have described above as your experience. Try not all high-end and do not mix the Everio format in your project again and see if it improves things.

  Once find you a clean and efficient workflow that works with the best video formats, you should see a significant improvement in performance.

  But for now, stay away from third-party video converters. They seem to be working against you.

• I can't have the option in menu to 13 items to work.  Any ideas?  I have already downloaded all the Templates menu and updated the software.  I never had this problem with 7 elements.

  I can't have the option in menu to 13 items to work.  Any ideas?  I have already downloaded all the Templates menu and updated the software.  I never had this problem with 7 elements.  With the help of 13 elements, I can successfully burn my movie on a disc (DVD) without menu.  The burning process is interrupted after that I added a menu.

  Rick

  First of all, please remove the stopper at the end of the content of the timeline. It is not necessary it and burn the causes of the problems.

  The main Menu marker should be OK, no similar problems as the stopper a.

  RTA

• Unable to capture video from HDV source (Sony HDR FX1) - DELETED FEATURES 13 elements seriously?

  After the purchase of Premiere Elements to capture HDV or DV video and after trying the trial of 12 items, and see the features that I bought the first 13 items, after troubleshoooting and research I discovered they basically stripped this version down to nothing and they sell under the same name of Premiere Elements. It's the wrong principal to say the least, previous versions having these characteristics. Incredible:

  Deleted features first 13 items that were in the first 12 items... aren't you supposed to ADD basic features a new product or to at least provide backward compatibility?

  The following features have been removed in Adobe Premiere Elements:

  • DV capture
  • Capture HDV
  • Timelapse capture (Stop motion)
  • Export to FLV
  • Export to the Web-DVD
  • Block face Pan & Zoom option
  • Interest in Smart trim slider

  So after paying the $$$ I can capture only in old windows movie maker in the file dvr-ms to 1440 x 1080 container (file properties report it to 720 x 480, but this opening in WMP good properties) using the MPEG-2 compression (not good at all for editing... According to the GOP structure) I am quite shocked that they have lowered the bar so low for this product without HDV or even DV acquisition leaves only the WDM capture?

  
  

  I guess they need to force users to pay for Premiere Pro now... it's really disappointing,
  

  
  

  What are my options of acquisition. M2T files now? Are there any plans make the product functional again?

  Briang

  This isn't Adobe, rather user to user forum. The frequency of the presence of Adobe in this forum is not defined.

  Adobe solutions for the elements 13/13.1 first condition are cited in the document that you seem to have already.

  Removed the unsupported file formats and features. Adobe Premiere Elements 13

  First elements 12/12.1 is the latest version which has the DV and HDV firewire capture in a Capture of the first elements window.

  You can capture firewire in another software and import of these captures in Premiere Elements with Premiere elements/Add Media project / files and folder...

  Often seen choices for this purpose if Windows is in question

  WinDV WinDV

  HDV Split 0.77 beta HDVSplit

  (HDVSplit split clips must be MPEG2.m2t files)

  Adobe is expected to release a new version of Premiere Elements in a few days/weeks (name should be first 14 elements). The functionality of the new version are not made known until the time of the release of the new version. I have no insider details information. I am not affiliated with Adobe in any way.

  If you need any clarification on any of the above, feel free to ask.

  RTA

• Cannot import. Files MOV with Premiere elements 12: generic error. With the help of Windows 8.1 (64B)

  This issue was already on the forum for the old version first and windows. I'm doing my videos (.) MOV format) with the digital camera Casio EX-ZR400.

  I have no problems with Photoshop elements 12 films produced by this camera.

  The problem was resolved after the download and installation of Apple Quicktime that was not on my PC :-)

  I can import. MOV files now :-)

• Any advantage of using Photoshop with Premiere Elements (instead of Photoshop CS4)?

  Soon, we are about to buy a Mini-DV with Premiere Elements camera. We currently have Photoshop CS4. Question: Is there a technical advantage to buy a copy of Photoshop Elements and Premiere Elements? Are there specific tools in Photoshop Elements that would make video editing more easy than using Photoshop CS4? Thank you.

  The biggest advantage to using Photoshop Elements with Premiere Elements is that you can transfer some projects — namely slideshows - from one to the other. In other words, you can start a slide show in Photoshop Elements, and then send it to Premiere Elements for the finishing and DVD release.

  But, if you have CS4, I wouldn't bother with Photoshop Elements otherwise. It will feel like a toy compared to the pro version.

• Sony HDV undetect with Premiere elements 13

  [ENGLISH VERSION]

  Hello

  
  

  Before, I used elements of first (EP) with Windows XP for a few years and everything worked perfectly.
  
  Unfortunately, I had to to upgrade my computer to Windows 7 and PE encounter some problems (error code [..- CBC- CAManager.cpp-884]) and I can't use it properly.
  
  So I decided to upgrade for the version 13 and I bought it. Installation is complete like a boss and there is no problem. However, I have cannot acquire My videos as with version 7 because my camcorder has not been detected.
  
  My camcorder works perfectly and the acquisition works with Movie Maker and first elements version 7.
  
  I am the owner of a camcorder Sony HVR- S270E and I use Windows 7 edition 64-bit.
  
  You have any solution in order to to get My videos with the version 13 of First elements ?
  
  Thank you to help me,
  best regards

  
  

  [FRENCH VERSION]

  Hello

  I used elements of first (EP) with Windows XP for a few years and everything worked perfectly.

  Unfortunately, I had to upgrade my computer to Windows 7 and PE encounter some problems (error code [.. \Src\CAManager.cpp-884]) and I can't use it properly.

  I've decided to upgrade to version 13. Symposium of the installation went well and there is no problem.  However, I can't acquire my videos as with version 7.

  My camera works perfectly and acquisition works with Movie Maker and v7.

  I have a camcorder Sony HVR-S270E and plug-in Windows 7 64 bit home.

  Do you have a solution in order to make the acquisition of my videos with the elements first 13 version?

  Thank you for helping me to come from en,

  Best regards

  Version 13 capture is more than one camera to tape

  http://helpx.Adobe.com/premiere-elements/KB/removed-features-formats-elements.html

• I get media generic error import with Premiere elements 12 importing audio.  How can I solve this problem?

  I get media generic error import importing audio when using first of 12 elements.  How to solve this problem?

  lightingleg

  There are many sons of Premiere Elements and a solution on the use of music iTunes in Premiere Elements.

  The solution is to convert the iTunes version wav music in iTunes before importing the file into a Premiere Elements project.

  The iTunes how can be found

  http://support.Apple.com/en-us/HT1550

  I went through this conversion of music several times, so if you need more details in this iTunes database conversion,

  do not hesitate to ask.

  If the music which is very old music to iTunes, then we might have to discuss the issue.

  Please check, examine, try and then let us know the result.

  Thank you.

  RTA

• S - Video capture with Premiere Elements

  I've been using Premiere Pro 2 for some time and have always been able to capture video from my Sky Box or video recorder with my Matrox RTX100 card using the s-video inputs.

  I recently bought a camera with HD (Sony NEX-5) capabilities and purchased Premiere Elements because my old PP2 will not recognize HD.

  PE does not recognize my Matrox card, so I can not download any more.

  Does anyone know how to download EP from a VCR or a TV?

  Thank you.

  In general, I find it better to download/video capture in a file using the application of origin for each device and do not use PE9 to capture.

  I have an old camera to DV tape and a strong memory HD camera and use different software supplied with each camera to create the files on my hard drive.

  The old tapes Sony DV SD camera has a video input which is ideal for capturing composite video VCR in AVI format.   The Sony software debtor can capture live directly from the tape using firewire, as he does not know if the DV tape or VCR plays.

  Only so I use these files in PE9 and I never hurt to mix .h2ts and. AVI formats.

  You must keep the original software that is most appropriate for your capture device (unless PE2 does a better job anyway).

• printing problem with photoshop elements 13.1

  I recently got an impression of my Photoshop elements 13 problem with my photosmart HP 7520. When I hit print the file I get this message

  The information about the registered printer are not compatible with this version of photoshop elements, or the saved printer is no longer available you will need to check your printer settings before printing

  The printer works in other applacations.

  I tried the update to 13.1 no help

  I uninstalled and reinstalled my printer Photosmart HP 7520.

  I tried to rename the printer.

  I tried to do a different default printer.

  I tried printing from Microsoft option in PDF and I get a message "because the default printer could not be opened" I also get this when you try to print to the photosmart

  all other printing options grey out the "print" key.

  You are very quiet.

• Save before exit Skillbuilders (version 3.0.1 for APEX 4.0): problem with some element of list in the form Manager

  Hello

  I have a problem with the plugin save before exit that I downloaded from Skillbuilders. As I use Oracle APEX version 4.0.2 and Oracle 10 g r2 database; so I downloaded one that says "Save before release (version 3.0.1 for APEX 4.0)" skillbuilders and follow-up of their documentation to import the plugin and use it.

  My problem is that even if I do not make any changes to data in the form and go to another tab. the alert message always appears, and by the way, I have an element of list manager on my form and it gets highlighted. So, even if I make the changes or do not change; still, the alert message is displayed and highlights the element of list manager. I think maybe the problem is to have a crèche in the form list item. I have reproduced the same problem in my personal workspace. Here are the details.

  http://Apex.Oracle.com/pls/Apex/f?p=55129

  Details of the workspace

  Name of the workspace: raghu_workspace

  username: orton607

  password: orton123

  App # 55129

  Page: 2 - has the element of list manager.

  Page 3 - works fine without the element of list manager

  Please help with possible suggestions.

  Thank you

  Orton

  Orton,

  I have connected to the workspace you and added a replacement JS file that corrects this error.

  If please, give it a whirl and let me know if you find other problems with it.

  It is to the 3.0.2 version of the plugin and I do not know if this even fix will work for your local Apex version earlier.

  When you are ready to go to the APEX 4.0.2 Please contact me directly for assistance. In the meantime, I'll work on the creation of a patch for this kind of new downloads of the plugin will contain this change.

  Greg

  [email protected]

• Free disc of Premiere Elements with the new camera. Installed on the pc and have shortcuts for items and items first. The serial No. work with Premiere Elements, but not Photoshop Elements. Why is this?

  Hi, I'm new to this bear so please with me. I have a free disc of Premiere Elements with a new canon camera and install it on my pc windows 8.1. After installation I have a shortcut for first elements and a shortcut for the elements, I guess that first for the video and photo elements. The drive came with a serial No. who worked with first, but when I opened elements, he asked for a serial No. but when I tried the same series only.  It says this serial No. is not valid for Adobe photoshop elements. I'm something wrong, I am missing a serial number, do I have to pay to use the side elements (photo editor), and if so I don't understand why he loaded the two programs on a disk I thought it was a big split in video and photo program.

  Help, please.

  Photoshop elements and first elements are two different programs (as you know).  they have different serial numbers used to activate them.

  If you were supposed to get both with your camera, you should have two serial numbers: quickly find your serial number

  However, is it possible that you had only to get a serial number of elements first and photoshop elements was provided as a trial (to see if you want to buy a serial number)?

• Problems with Premiere Pro CS6 and Media Encoder

  I have been using Media Encoder for months with Premiere Pro, but he has recently stopped working. It gets stuck trying to connect to the dynamic link and then fails.

  I tried to solve this problem for a while following the instructions online and I could have screwed up things. Is there a way to uninstall Premiere Pro and Media Encoder completely so I can reinstall them?

  I have a creative cloud subscription.

  First, select help > deactivate...

  Then just uninstall as usual.  After that, run the Script of cleaning of Adobe.  Restart and reinstall.

  https://www.Adobe.com/support/contact/cscleanertool.html

• Problems with Photoshop elements 11 gel

  I recently upgraded to items 9 to 11 items. Now, when I work in the organizer or editor of the program freezes frequently and then displays the message "program does not. If I wait long enough – a few minutes - it starts running again. I never had this problem with Elements 9

  DDenny01,

  You are still sufering from this problem?

  Brian