S10 - 3T Wifi numbers + multitouch capabilities?

Similar Questions

• S10-3 serial numbers

  I use a report to pull all the serial numbers of all our computers. However, the only computers where serial numbers are not displayed are the s10-3. Where is the serial number stored on those computers?

  Edit by mod: correct the name of the post: S-103 S10 - 3

  serial numbers are stored in the bios (motherboard), you can check the bios for it, or you can download 3rd party applications such as everest or cpu - z to find out the serial numbers.

  Edit: http://img101.imageshack.us/img101/8039/everesto.png

• Yet another question s10-3 wireless

  SUP yall... Just got my s10 - 3 pre-installed with windows 7 starter, but being the old skool, I reformatted with XP through lenovo driver offers full support. So things have been going pretty well with it, until all of a sudden, he acts as the wireless hardware switch is set to off, even though it is clearly not not off the coast. I was cruising around these forums and goggling wildly and all I can find is people having problems with readycomm, which I have not installed.

  Basically... think netbook hardware wireless switch is still off and I do not have installed readycomm. Any thoughts?

  ignore me. I did exactly what the last guy said here: http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/S10-3-WiFi-Issues-Wireless-function-antenna-de...

  -Quick start installation

  -Repair installation of QS to make it work actually correctly

  -Start QS and pressing Fn + F5 to turn on WiFi - this turned the WiFi light on permanently.

  -Leaving QS and cold-start in Windows

  flawless victory

• Make iPhone iPod for podcasts to imitate

  I have been using an iPod touch to listen to podcasts for years and really how he manages. I would like to have the Setup on my iPhone to mimic what I could do on the iPod, essentially ignoring all WiFi and cellular capabilities of the iPhone.

  Specifically, I want to do all my download on my laptop via iTunes and use iTunes to decide what future episodes to my iPhone. (I have a large library of old podcasts on the computer and, occasionally, as mark as unread and bringing over the device to get back at them and I also like to manage my substantial table of subscriptions via a big screen and keyboard).

  I want the phone application to show me that my episodes recorded and specify which are read, unplayed. Is it possible to adjust the parameters of the iPhone app to make this happen? Or am I condemned to manage my podcasts on the phone now?

  I doubt that you will be able to do through the app of Podcasts Caveat: I dropped the synchronization of podcast (a podcast) files between my computer and the iPhone for years because it does just simply no more; Maybe it is improved now, even if I doubt. What you want is not possible and it's always what I do, but it's a heck of a lot more complicated than seven or eight years ago.

  What I do: on the computer, change all downloaded podcasts Media type = audio book or music. (Select a file, command - I to get information, select Options, and then in the Media like audio book or music menu.) Note: these podcasts will download then again - I just mark as played the second time.

  If you have files like music or audio books, you can sort them into playlist, smart or dumb, and then sync them to your iPhone.

  If you change the media type of music: playlists behave pretty predictably, but you lose things like jump of 15 seconds. The times-podcasts-now-music will play music on your iPhone through the app. It can also make things weird if you use Apple music and iCloud music library or whatever it is called. (This problem is one of the reasons I don't use music to Apple.) If you have playlists of music based on 'media type = music', you will also have problems.

  If you change the media type of audio books: you keep the memory-jump function, so that's good, but the times-podcasts-now-audio books (in general) will not play through music - instead, they'll be in the iBooks app for the iPhone by default, and that leads to a series of problems. Playlists that you set in iTunes will determine what you can synchronize, BUT these playlists do not actually appear in the iBooks app. Instead, you will see just all different content organized by title or author, or other selected criteria. In addition, the game counts become totally foires, at least in my experience. For example, I often 10 unplayed episodes of "things you should know" synced to my iPhone and if I use the app for audio books to play only the seventh of these episodes, then #1 à #7 seem to all get marked as being played (and often marked as played twice, who knows why).

  What I use instead: Browser Audiobook, an application designed by a person who is active in this forum. It is not the prettiest of apps, but it keeps the playlists and unlike in iBooks, in audio book browser you can see playlists. I don't think he can play consecutive episodes - just one, and then you must select a different episode. It works much better than the iBooks to play app sync playlists files short audiobook (originally podcast), and he manages the counties of predictable game.

  So my workflow:

  1. Podcasts that I listen to and then delete (new, for example): I use covered to subscribe to these on my iPhone. Now I avoid Podcasts of Apple app and my life is better for it.
  2. Podcasts I want to keep: I subscribe to these on my computer (and all the options that even alluded to the synchronization are disabled). Manual update only. Every day I 'Refresh' and download and change the type of media for each group of audio books. Then I refresh it once again, the same podcasts download it again, and I mark these additional files as played.
  3. Every day I have manually sync my iPhone with my computer, and copy the times-podcasts-now-audio books. (Of course, happens if my photo library is cooperating so far here, but it is another matter.)

  It's the craft on hack on hack, and it seems that each update IOS, Apple adds another complication.

  Good luck!

• Vista does not recognize external hard drive (LONG!)

  I bought a Terrabite Cavalry USB Mass Storage 1 unit some time around January 2009. We used it to back up my computers portable wife and daughters without any problems (it was Windows XP a Windows Vista). Shortly after, we have tried to back up my desktop computer, also running Windows Vista, but my computer does not recognize the drive into any USB port. After this attempt, we get is more willing to work on any computer. We contacted the cavalry and they replaced the drive, but we lost a lot of data since most of the files saved on my wife and daughter desktops have been deleted to clean up their hard drives.
  When I received the spare drive I backed up my computer with no problems.
   
  We moved from NC to PA in August of last year and had packed the new car. Recently, we unpacked and used to transfer ALL the photos of my wife, numbering several hundred, again with no problems. In addition, she has saved his computer using the Vista utility. Today, I made the horrible mistake of trying to back up my computer using the same player. I had completely forgotten the previous question. Yet once, my computer did not recognize the drive, any USB port used or on the tabs 'computer '. When the drive is plugged in and turned on, it will be not even allow us to display the elements on the tab 'computer '.
   
  And now, just as before, the player no longer works on my wife's computer either. THIS IS AN ESSENTIAL QUESTION! If we cannot access the drive over 500 photos of our family, covering more than 5 years are lost forever!
   
  Although I've read similar questions on this site (especially in regards to Windows XP) I can't find the one that is exactly the same problem as this.
  There is nothing wrong with my computer. Each USB port works fine. I tried other USB devices with no problems of any kind.
   
  On both computers, if you connect the external drive and the power up it starts with a light blue on the front as it is supposed to. He then became red and Windows makes the normal audio alert, as it does with any USB device plugged. On the bar, the new icon 'Remove hardware safely', says but clicking on that alone causes the computer to get ung place intil the drive is unplugged. The same is tru if we try to access the tab "Computer" in the Start Menu. The computer attempts to load the itms 'Computer' but never the completion of the task. THE TWO COMPUTER DO EXACTLY THE SAME THING! My wife uses a Dell with Vista Home Premium and I use an EMachine with Vista Home Basic. And this issue seems to happen only after using his computer to mine, not the other way around because I had done a backup on thise drive when I got last year and she just did a new now on his own.
  I wrote to the Cavalry, but received no response. They said the last time that they aren't able to recover lost data, and it is said that all over their site.
  The external drive is a cavalry model # CAXP3701PA.
  Someone please help! Pictures of our last five years (including photos of my wife of his precious Golden Retriever from puppy to now) are lost if we cannot solve this problem. It seems that the player works well, but something corrupting of the software driver. We tried again to my wife's computer o and it begins with "Download driver software for device" but then what I described before using it.
  Any suggestions would be greatly appreciated.

  Hello

  Put the disc in a real store of the computer (not the leeks and the glances at a Best Buy or other stores)
  and they can remove the drive from the case and put it in another computer to back up data
  to other media. Of course this cancels any warranty and may not work if the drive has probably
  in fact failed. Data can often be recovered since a failed drive while it's expensive.

  (The drive could be put in either your PC as a 2nd drive).

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can I connect my old iMac (with no wifi capabilities) to the internet using the cable to my MacBook?

  I have an older iMac (PowerMac 6 bought in 2003) that only connects to the internet via a cable directly to the router. I moved this computer out of the range of the router and you want to connect to the internet again. I also have a MacBook (late 2009), which has Wifi capabilities. Is it possible to connect the old iMac to the internet via the MacBook?

  Yes, this should be doable. On the MacBook, go to the system Pref > sharing > turn on internet sharing via the Ethernet port.

• S10-3 quick start OS (Splashtop) Wifi problem

  I just got my S10-3 last Saturday, and I discovered that the wifi is disabled in OS quick start peacekeeping. No matter, I press Fn + F5 or switch the wifi button, Wifi can be enabled in OS quick start. But all is well in Windows.

  I assume that if it's the number problem driver in OS quick start? As all known this card Wifi driver is a main issue in the Linux system (OS quick start is actually built by Splashtop Linux), and so the chipset wifi is not ready yet in versions. Moreover, my Wifi chipset is Atheros AR9285.

  Someone at - it had the same problem for this?

  
  

• S10-3 questions of WiFi: Wireless function / antenna disabled - unable to connect to a WiFi network

  I recently bought an IdeaPad S10-5 / Type 0647 / Windows 7 operating system.

  I can't connect to a local wireless network at all. I can't even see all WiFi networks in my grand that I can see with my notebooks in use.

  Atheros AR9285 wireless network adapter driver seems to be updated ((version dele de pilote est 8.0.0.279).)

  I tried various things such as deactivation and activation of wireless networks / adapter, looking for the latest version of the driver etc without success.

  I activated the WiFi to the computer (setting of the HW switch) and but if I go through the (Systemsteuerung) Control Panel and Device Manager I get the message AdapterLAN connection or the wireless function is disabled

  Lenovo ReadyComm told me that the antenna of the wireless device is turned off.

  If I can't solve this problems, I'm afraid I have to return this computer.

  Any help is very appreciated.

  Thank you and best regards.

  Hello and welcome,

  Uninstall Readycomm.

  cordially KalvinKlein

• How do I know if a device has wifi capabilities...

  Hi, is there any class or something to do to find out if a device has hardware wifi inside? Check the list of templates is not a good solution.

  Thank you.

  Use the following call:

  RadioInfo.areWAFsSupported (RadioInfo.WAF_WLAN)

  It is available from the RIM API 4.2.1

• Can I increase the wifi receiving capabilities of the hp 8500 a. I need a longer reach?

  I need increase the range of the printer. The walls of my house are very thick, can anyone suggest anything?

  Hi Steve,.

  Thanks for posting your question in the Microsoft Community and we give the opportunity to help you.

  Unfortunately, you can not increase the range of Wi - Fi connection. However, you can create a bridge network the network connection to the printer. Check out the following articles for more information on creating a network bridge:

  Create a network bridge

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-network-bridge

  You can also see the following article for more information on improving your wireless network:

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=NLPr8cmzIE6

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• ATV 4 see wifi or ethernet but not real internet

  I have an Apple TV that connect via wifi for the networks listed below, and it will also connect directly via ethernet cable to the back of the Airport Extreme, which lies next to him.

  But the camera can not see the internet or access anything that it is about that.

  In the settings it reads still see the wifi network and have a good signal (or that it is connected by ethernet cable), but address IP, subnet mask, router, and DNS LU "N/A" rather than having appropriate addresses and phone numbers

  Turning everything works once again, it will work temporarily, but then after a while (I think that once he woke up from his sleep), the internet has gone again.

  Any ideas what may be going on here?

  DETAILS:

  Model: A1625 (32GB)

  Serial number:

  tvOS: 9.2.2 (13Y825)

  address of WiFi: d0:03:4 b: 33:45:15

  5 signal strength points

  Automatically the date/time value

  Network (BTHub6):

  ISP: BT Internet (unlimited Infinity 2)

  Modem/router: BT Smart Hub

  Additional network (let's call it' method'):

  Connected to the main router BT are two airports of Apple. That have identical parameters and therefore operate as a network

  1. airport Extreme

  7.7.7 software

  Mode: Bridge Mode

  Network: Create a wireless network

  Security: WPA2 Personal

  Connect: DHCP

  Automatically configure IPv6 (mode: native)

  2.4 GHz and 5 GHz two automatic

  2 Time Capsule

  Software 7.6.7

  Airport Extreme-same settings

  This network usually gets 10-30Mbps on the device according to the time of day and use etc (using the Ookla app/website speed Test)

  Note: all other devices work fine including:

  2 x MacBook Air

  2 x PC (Dell)

  1 x MacBook

  2 x iPhone 6

  1 x iPhone 6 c

  1 x iPhone 5 c

  1 x HP printer

  I tried many things

  I tried to plug the ethernet cable directly into the hub of BT as well as Airport Extreme

  I tried to remove one of the airports in the network

  I tried to separate the network 2.4 GHz from the 5 GHz network and tried mountain BIKING on both

  Any ideas what may be going on here?

  I had a very similar problem, immediately after the upgrade.

  I think that I have solved it by changing the settings of terminal BT. In the my network - IPv4 configuration settings, I disabled DHCP that is authoritative and registered. Connection Ethernet TV Apple immediately corrected himself and formed a stable connection.  I turned authoritative DHCP on, and the connection still stands.

• WiFi, stall after iOS 10

  MY wifi is randomly after cutting 10 upgraded ios.  Anyone elese?

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom.

  (1) restart you device. If a normal restart does not help, hold down these keys at the same time for at least ten seconds, until the Apple logo appears: a) the sleep/wake button and the low Volume button (7 iPhone iPhone 7 and more) or b) the sleep/wake button and the Home button (all other models)

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Why my wifi keep disconnecting on iOS10 on iPad?

  My wifi turns off on its own on my iPad since the update to iOS10.  It seems to do both to the course while sitting idle and actively to the iPad.  Any ideas on what could be the cause or how to stop it?

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom.

  (1) restart you device. If a normal restart does not help, hold down these keys at the same time for at least ten seconds, until the Apple logo appears: a) the sleep/wake button and the low Volume button (7 iPhone iPhone 7 and more) or b) the sleep/wake button and the Home button (all other models)

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• WiFi problems on ios 9.3.5

  I am a user of the iPhone 6. After the upgrade to iOS 9.3.5 I am facing some problems serious wifi. I can connect to wifi only if I'm within the range of the meter. What someone with a similar problem? I tried to reset the network settings... But that did not work. Please advice how to solve this problem.

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• My wifi/internet is very slow since the IPhone Update 9.3.4.

  I have an IPhone 6 and since the update (3 days ago) my wifi/Internet is very slow.

  Minutes of need for pages to load, and the App Store and the ITunes App not to load any. Photos and videos need a time very Long if they work at all.

  The wireless router is not the problem because my laptop works fine with it.

  Thank you for responding!

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom.

  Alternatively, you can try to reset the App Store first, since it won't load at all. Please follow these steps:

  Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. Then sign out of the iTunes Store (in the settings).

  Then restart the unit.

  Then sign into the iTunes Store and try to download again.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892