Yet another question s10-3 wireless

Similar Questions

• BlackBerry smartphones yet another question of Storm vs App Store

  Hi all

  I have a storm on the Vodafone UK network with the latest version of the software installed, version 4.7.

  I received the email from BB with the link to the App Store, I click on the link in the email through my BB and be taken to a page telling me that my phone is not supported.

  I think I did what I'm supposed to do here, I free memory, the right software etc.

  Any chance to get the App store on my phone or I will give just straight up?

  RyanJohnH wrote:
  Hmm, I think that this may be the problem then

  That is the question

  Good luck with all that.

• Yet another question on the planning of the CPU

  Hello!

  CPU Scheduling is one of those endless, and although I read a lot about it, I found different answers to the same question. Moreover, this is the last document on this subject and recommended... read http://www.VMware.com/files/PDF/Techpaper/VMware-vSphere-CPU-Sched-perf.PDF .

  Is it possible to run 2 virtual machines at the same time in the same logical processor? Very basic question, I'll appreciate any response and if it has links to the official documentation, even better!

  Kind regards

  elgreco81

  Ah, I think I see the confusion. There is no such thing as using a fraction of a nucleus within a single cycle. You CAN use all of a nucleus for a fraction of the total cycles over a period of time, but a physical core is busy or idle. There is no in-between, especially since we are ignoring hyperthreading in this example.

  All of a core to aid for a fraction of the total time in a given sampling period, is what gives the illusion of the use of 'part' of a core. Split in fact one heart in this way would require States and the architecture that simply do not exist in the x 86 world.

  Note that in the article by Frank Denneman he calls specifically free cycles "shopping on ' Planner. In your example, there will be always 1 free cycle at any time. There are 1000 cycles per second in your original example, and many of these cycles may be free, but there is never more than one at a time.

  To say things, otherwise, you cannot use all 1000 MHz in the first millisecond.

  The paragraph you cited in the guide to management resources assumes a Jepp 2 GHz. keep in mind that any measure of frequency REQUIRES a time interval. There is no literal split 'given time' is implied here. What they're saying is that if over a certain period of time, say a second, VM1 only consumes 500 cycles and ask no more, then VM2 is welcome to help itself to one of the unused 500 cycles initially entitled to VM1, and cycles of 1000 that VM2 was already entitled.

  I would like to know if there is still no ambiguity, or whatever it is that I does not really there.

• Yet another question "check box in a table"

  Hi everyone - I feel like this issue has been beaten to death, but I'm not super techno and it is very hard for me to decipher the many solutions that have been offered in this forum.
  
  I downloaded and installed the plugin simple checkbox. I want to use it to allow the user to select a checkbox that should be updated then a varchar2 column (1) in my table of database with a "Y" or "n" depending on whether the box is checked. In a simple form of APEX it works easily and without any problems that I can choose the plugin Simple checkbox in the dropdown list of "display as" for a given when creating the form item.
  
  In a tabular presentation there is no option to select the plugin simple checkbox for display "like." So can I assume that this is not supported and so I need to use the apex_item.checkbox function in my select statement?
  
  I tried this and I see a box on my sub form of table, but when I select the check box for a given row, and click Update I get this error:
  

  'Current version of data in database has changed since user initiated update process. current row version identifier = "9660AA52272606105296577232D033C7" application row version identifier = "AC661FC2F31800615ABE16CA014BB96F" (Row 1)'

  I looked at the example of the Dene here > http://deneskubicek.blogspot.com/2008/10/tabular-form-checkbox-for-setting.html, but I just can't believe that this a lot of code is needed to do something so simple.
  
  I have a http://apex.oracle.com sample app installation where I have reproduced my setup:

  Workspace: Leppard
  username/pw: guest/app_1000
  MyTestApp > MyTabularForm.
  The column in question is 'Checkbox' and the db column in Emp is also named chechbox.

  Any suggestion would be appreciated.
  
  Thank you
  John

  Hi John,.

  Thanks for the creation of an example, this of course made easier :-)

  The error you are getting is because your column name is different from the column name in your query.

  I changed your query to this ("CheckBox" checkbox)

  select
  "ROWID",
  "EMPNO",
  "ENAME",
  "JOB",
  "MGR",
  "HIREDATE",
  "SAL",
  "COMM",
  "DEPTNO",
  "CHECKBOX"
  from "#OWNER#"."EMP"
  

  Your box was also no definition LOV so I wrote 'Y, N' it

  It seems to work now.

• Yet another question of model

  Recently, my model started inserting his own repertoire of all the URLs in the site when I update the pages, so:
  
  href = "site/index.htm"
  
  became:
  
  href="site/templates/index.htm".
  
  The links in the site are enterred like this:
  
  href = "Stories.htm"
  
  For a page that is located in the directory of the site. The model transformed into:
  
  href = ' templates/Stories.htm'
  
  This just started happening. Before that, there was no problem. No idea why this happens and what to do about it?
  Of course, none of the work of the image or the links of the CBC.
  
  Help
  
  -Kenoli

  Thanks for your quick response. I'm helping a friend here and what threw me was that it works and then suddenly wasn't. Of course, I don't know what she could do to cause that, even if she is not conscious of having anything other than make a small change and update related files to the model. I discovered that inserting a "... / ' from each link solved the problem. Here are answers to your questions:

  > Are these pages * in * the Templates folder?

  NO.

  > Are you put these links of coding, or by searching for the target files?

  I don't know, but try the method browse inserts the "... / 'syntax in front of the link." (should have tried it immediately)

  > Can we see your template page?

  I think this is resolved, so...

  > DW did only what you tell it to do...

  Gotcha, although, as in life, sometimes we don't know exactly what we said.

  Thank you

  -Kenoli

• Yet another question of password

  It is a system running Vista Home Premium. Recently, the password has been changed and is now unknown (don't ask). But the old password is well known. Tried to use the instructions in section # 740765 but who overcharged a username and a password. Is there a way to do a restore system without login? The administrator account has never been activated. Thank you.

  You have forgotten the password.

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  Mick Murphy - Microsoft partner

• Yet another question: How do the update of Windows (Windows 7)

  My Dell laptop running Win7 fine until recently when the WU stop working, which seems to be a very common problem.   After many, many hours to try dozens of fixes, I gave him room and upgraded to Win10.  After discovering that Cortana (surprisingly) cannot be uninstalled and uses massive memory resources, I have reinstalled Win7 from the original dvd.    Window update still doesn't work, but I downloaded a 'stand-alone' Windows Update version and it worked.  Downloaded and installed updates 225, but subsequently of course, Win Update does still not work.   It just displays a message that updates are downloaded, but nothing else happens (several hours).   I tried Fixit kb971058, and it is also just here for hours.

  I used Windows since 3.0 and with each major release, maintainability got progressively more difficult.

  I don't know how Win Update might have gotten this done but has hundreds of discussions on the issue on the forums, etc, I think maybe that Win7 is now a lost cause and it's time to switch to Linux?

  Download KB3145739 from the Microsoft web site and install it.32 bit version: 64-bit version of https://www.microsoft.com/en-us/download/details.aspx?id=51857 : https://www.microsoft.com/en-us/download/details.aspx?id=51853

  You must include KB3153199 in this guide. There is no update of windows running performing normally without KB3153199 and a few others installed. Links and info provided here:

  http://Wu.krelay.de/en/

  KB3153199 and KB3145739 are still necessary, after installing the rollup of convenience.

  https://blogs.technet.Microsoft.com/windowsitpro/2016/05/17/simplifying-updates-for-Windows-7-and-8-1/

  Best regards, VZ

• Yet another question about the update with the shutters tab

  I am quite new to this, but I've been scouring the boards and try many different things, and I decided to ask for advice.

  There are other threads similar to my problem such as:

  http://supportforums.BlackBerry.com/T5/Java-development/SetFocus-issue-with-tabbed-screen-page/m-p/6...

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-delete-a-Manager-or-a-field-that-is-c...

  I have a set up tabbed pane based on the example and everything works fine until I have delete a line from a VerticalFieldManager. It is by default the focus on the first item on the screen, and I get this. My problem is trying to substitute or replacement behavior.

  My screen implements the FocusChangeListener for the buttons on the tab (custom LabelFields).

  I tried many different variations - I tried to manage the update completely manual and ended with a bit of a mess. I tried to capture the event navigationUnclick() and coding of the focusChanged() method to manually switch the update, but it seems that the focusChanged() method is called before the focusChanged(), which doesn't help me.

  As I said I am pretty new to this so I could do something very stupid, but I don't really understand the focus handling implementation. A kick in the right direction would be appreciated.

  Thank you.

  You can have a NullField in your managers before all other areas - in this way, even if you delete the rest, the NullField might keep the focus.

  If this does not help, try the substitution of sublayout for your managers, call super.sublayout and then explicitly setFocus to your NullField (the deletion of any field causes a display Manager to rearrange).

• Yet another question of upgrade!

  Hello

  Basically, we have two virtual Centres in bound mode 4.1.

  I'm looking to upgrade this weekend.  The main concern I have is with a permit.  I want to be able to improve the VC of the first and the hosts later (in the next few months as we put in scene in worms Dominican Republic / Dev / DMZ / Live).

  Are there problems to upgrade just the VC (especially with a permit) and then upgraded the laer hosts?

  Thank you very much

  
  S

  There is no problem with that, in fact, that's the way correct i.e. vCenter first.  vCenter 5 held the license information for ESX/ESXi 4.x guests and guests of ESXi 5.x, you need just to make sure that you add your 5 vCenter during or license keys once you have made your updates to vCenter.  Then, when you're ready, simply add ESXi license 5.x to vCenter and begin the upgrade of your hosts.

  Doug.

• Yet another question of disk configuration

  I know that this has been discussed ad nauseum, but I am confused on some points and need advice on disk configuration. I just ordered a laptop that has a 256 gb msata ssd + two other SSD of 256 MB and a removable 7200 RPM 750 GB drive in the optical drive slot. So I will, indeed, have four disks (3-256 gb SSD & 1-7200 RPM HD). I know that the general concepts between dedicating different disks for OS / programs, scratch disk, make media player, &, but after reading suggestions from Adobe, manual first and forums, I'm not clear on the fixed assets can be placed on removable drive and what assets I can return the drive 7200 RPM to optimize the Assembly & rendering speed for the global configuration of disk? First manuals I've read everything it say to not place scratch them files on a removable disk, & of course I use the removable drive to OS & programs - that render leaves or media for 7200 RPM disk. Which would be best?

  With our specialized needs is change above your recommendations somehow?

  Not mine.

  By the way, you can just make the PP sequence to ensure smooth playback, and then use his Cinema display mode (CTRL + "") to go full screen without GUI.  The space bar will always start and stop playback.  Connect the computer to the projector and speakers, and you're golden.

• Yet another question about VCP, training materials

  Hi guys,.

  I'm sure you asked this several times, but I hear that the best study materials are unique to VMware .pdf but who exactly those? There are thousands!

  I would be correct in saying the .pdf is available for download on this page would be a good starting point?

  http://www.VMware.com/support/pubs/vi_pages/vi_pubs_35.html

  I just finished CBT of Elia Khnaser (very good) and also bought the VCP Exam Cram book which I'll go through once my knowledge base is preferable.

  Reserved (e) to participate in the day 4 training this month, but seeks to focus on the good material so far here. If you know of any other material which is good please let me know.

  Not interested in brain shocks - the reason for the test is if it forces me to learn the in-depth product!

  -Is it possible to book your exam prior to attending the training and the calendar for after training?

  Thanks in advance for your answers.

  Matt MC

  Yes - URL is the place for the PDF files, you will need to study for and yes it is possible to book your exam before taking the class.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Yet another question of color management

  Hi people,

  I have read several of the very detailed color management messages/discussions here already but that you did not find the answer I'm looking for. So I hope that some experts might be able to save me time and the entry...

  I'm under a Windows 7 (32-bit) environment with a Dell screen Ultrasharp u2711 attached. I left the monitor prepare to close on 30 minutes and ran an 'Easy' calibration with Lacie's eye - one device using the Gretag Macbeth 3.6 software. (I guess I could have used the calibration of the "Advanced" option but thought that I would allow me to save time and has always been pleased with the results on my older Sony CRT).

  I'm under LR3.2 and CS4. Viewing images in LR RAW skin tones are much too saturated, but when I export images as sRGB JPEGs results seem very nice when displayed in the (much less saturated) Windows Photo Viewer. If I open the same image in Internet Explorer, it is identical to the way she looks in LR. (I haven't installed so have not compared to Firefox). If I open the image in CS4 by default it has the same appearance it does in Windows, but if I change the format of RGB monitor test it corresponds to what I see in LR and IE.

  I guess it is somehow related to the new wider gamut range that the monitor can display (compare to my previous CRTs). I read in one of the messages of Jao that LR is always right and other unmanaged applications will do weird things on high range screens. IE is not color managed then why it display very similar colors to what I see in LR, when the standard Windows image viewer displays much less saturated color (which seems to be the opposite of what others are experiencing)?

  I usually always export to JPEG sRBG images usually go online, but this series is going to a customer who will be most likely took to printing and viewing on a PC.

  Looking forward to your comments on this.

  Kind regards

  Chris

  Can anyone confirm 100% if the Windows in Windows 7 Photo Viewer is color managed?

  This is the case.

  Check out this thread on the calibration range as your monitors. Adobe RGB is perhaps not the best starting point, and certainly the luminance to any monitor that is used for the treatment of the image must use 120cd/m2 as an absolute maximum. The best results will be obtained my ambient light control (monitor hoods etc) in order to use around 100 cd/m2 luminance values or less. A decent calibration device should be able to measure the ambient light and the recommendation on the lowest luminance setting allows you to calibrate.

• Yet another question decipher product number Adobe...

  Nobody knows what that means product number:

  STD, CS4, WIN, UPG, EU 001, DV, CS3

  I think it's an update since CS3 CS4, Universal English - but what is the prefix of STDS?

  I tried to find someone depui Adobe to help me on the chat service client, but these people are just clueless. All the

  the rep would want to say I buy the upgrade to CS4 CS5 versions on the Adobe site.

  < rant > you would think that a company as large and profitable as Adobe would be able to use some "customer service" representatives who both could speak English well enough and could also do more than just read a script < / rant >

  STDS is in fact to Design Premium Suite.

• Yet another question regexp_replace

  Hi guys,.
  
  I am trying to replace the list of columns in a select statement as follows:
  

  SELECT regexp_replace('select col1, col2 from table',
                        '(select )(.+)( from )(.+)',
                        '\1'||'col3, col4'||'\3\4'
                        )
    FROM dual;
    
  OUTPUT: 'select col3, col4 from table'

  The problem is that if I have internal queries, it will not work.
  

  SELECT regexp_replace('select col1, col2 from (select col1, col2 from table)',
                        '(select )(.+)( from )(.+)',
                        '\1'||'col3, col4'||'\3\4'
                        )
    FROM dual;

  You guys can give me some advice.
  
  Thanks in advance.

  Manuel Vidigal wrote:
  ...
  ... but I already do not know what are the columns that will be replaced. I don't know with what I want to replace it with.

  Ultimately I want to replace everything from the first select statement until the first of a string custom.

  test@ORA10G>
  test@ORA10G> --
  test@ORA10G> with t as (
    2    select 'SELECT col1, col2 FROM (SELECT col1, col2, col3, col4 FROM table1);' x
    3    from dual)
    4  --
    5  select :x as x,
    6         regexp_replace(:x,
    7                        '^SELECT (.*?) FROM',
    8                        'SELECT ''my_custom_string'' FROM') as modx
    9    from t;
  
  X                                                                      MODX
  ---------------------------------------------------------------------- ---------------------------------------------------------------------------
  SELECT col1, col2 FROM (SELECT col1, col2, col3, col4 FROM table1);    SELECT 'my_custom_string' FROM (SELECT col1, col2, col3, col4 FROM table1);
  
  1 row selected.
  
  test@ORA10G>
  test@ORA10G>
  

  isotope

• Yes, another question regarding the freezing of Safari - EtreCheck report included

  Yes, another question regarding the freezing of Safari.

  From a little over a month (I think), Safari started freezing regularly whenever I want to open new tabs or switch between tabs. I found myself to leave the program several times per day / hour. I can't identify any specific common cause (other than my MacBook being old) or any new software or updates that might have initiated the question. At first I thought he might have many tabs, I tried to open, but recently it happens even with only a few tabs open.

  I worked through the steps I found in this forum and others: empty the cache, start in safe mode, etc nothing works.

  Based on the previous suggestions, I have downloaded and run EntreReport which I included below. The note and maybe just a distraction, but EntreReport has crashed three times tonight, before he was able to produce the sub report. I ran the report after restarting my system with no other programs running.

  Suggestions are welcome at this stage because I want to start using Chrome or Firefox because I like the transfer procedure between my devices.

  Thank you in advance.

  Ben

  -----------

  EtreCheck version: 2.9.11 (264)

  Report generated 2016-04-28 22:48:58

  Download EtreCheck from https://etrecheck.com

  Time 05:45

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Problem: Apps are broken

  Description:

  Safari freeze when opening new tabs / switching between the tabs.

  Hardware Information: ⓘ

  MacBook Pro (15-inch, mid 2009)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro5, 3

  1 2.66 GHz Intel Core 2 Duo CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = battery check - Cycle count = 389

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1440 x 900

  NVIDIA GeForce 9600M GT - VRAM: 256 MB

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disc information: ⓘ

  FUJITSU MJA2320BH FFS G1 disk0: (320,07 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 319,21 go-go (54,93 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS23N)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Card reader Apple

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  ~/Library/LaunchAgents/com. GoodShop.updater.plist

  ~/Library/application support/GoodShop/updater

  A unknown file found. [Check files]

  Kernel extensions: ⓘ

  / Library/Application Support/Symantec/virus

  [no charge] com.symantec.kext.SymAPComm (11.1.2f17 - 2015-05-23) [Support]

  / Library/Extensions

  [no charge] expressvpn.tap (20150118 - 2016-04-12) [Support]

  [loading] expressvpn.tun (20150118 - 2016-04-12) [Support]

  / System/Library/Extensions

  [no charge] com.DYMO.usbprinterclassdriver.kext (1.1 - SDK 10.9-2016-04-12) [Support]

  com.Silex.driver.sxuptp [no charge] (1.5.1 - 2016-04-12) [Support]

  com.symantec.kext.internetSecurity [no charge] (1.3.2 - 2016-04-12) [Support]

  com.Symantec.kext.IPS [no charge] (3.2 - 2016-04-12) [Support]

  Startup items: ⓘ

  CMA: path: / Library/StartupItems/cma

  RosettaStoneLtdDaemon: Path: / Library/StartupItems/RosettaStoneLtdDaemon

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 165 tasks Apple

  [operation] 65 tasks Apple

  Launch system demons: ⓘ

  [loaded] 45 tasks Apple

  [loading] 161 tasks Apple

  [operation] 83 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-28) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-31) [Support]

  [operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2015-01-19) [Support]

  [loading] com.epson.esua.launcher.plist (2015-06-29) [Support]

  [operation] com.epson.eventmanager.agent.plist (2014-09-21) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-01) [Support]

  [operation] com.mcafee.menulet.plist (2016-03-23) [Support]

  [operation] com.mcafee.reporter.plist (2016-03-23) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2013-11-14) [Support]

  [operation] com.symantec.uiagent.application.plist (2010-11-16) [Support]

  [operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2015-10-31) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-31) [Support]

  [loading] com.adobe.fpsaud.plist (2016-04-15) [Support]

  com.DYMO.pnpd.plist [no charge] (2014-10-16) [Support]

  [loading] com.expressvpn.tap.plist (2016-01-27) [Support]

  [loading] com.expressvpn.tun.plist (2016-01-27) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-01) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-18) [Support]

  [operation] com.mcafee.cspd.plist (2015-05-08) [Support]

  com.mcafee.ssm.ScanFactory.plist [no charge] (2016-03-16) [Support]

  com.mcafee.ssm.ScanManager.plist [no charge] (2016-03-16) [Support]

  [operation] com.mcafee.virusscan.fmpd.plist (2016-03-22) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2013-11-14) [Support]

  [loading] com.symantec.MissedTasks.plist (2009-11-10) [Support]

  [loading] com.symantec.Sched501 - 1.plist (2014-08-27) [Support]

  [loading] com.symantec.Sched501 - 4.plist (2015-01-08) [Support]

  [loading] com.symantec.Sched501 - 5.plist (2015-01-08) [Support]

  [loading] com.symantec.avscandaemon.plist (2009-10-10) [Support]

  [operation] com.symantec.diskMountNotify.plist (2009-09-14) [Support]

  [loading] com.symantec.navapd.plist (2009-09-14) [Support]

  [loading] com.symantec.navapdaemonsl.plist (2009-11-14) [Support]

  [operation] com.symantec.sharedsettings.plist (2009-07-22) [Support]

  [operation] com.symantec.symSchedDaemon.plist (2009-11-10) [Support]

  [operation] com.symantec.symdaemon.plist (2009-03-27) [Support]

  [operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]

  User launch officers: ⓘ

  com [running]. GoodShop.updater.plist (2013-09-24) [Support]

  [loading] com.adobe.AAM.Updater - 1.0.plist (2015-10-25) [Support]

  [failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-04-25) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Application of Google Reader (Google Drive.app/Applications /)

  Dropbox application (/ Applications/Dropbox.app)

  ExpressVPN application (/ Applications/ExpressVPN.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Other applications: ⓘ

  [ongoing] com.DYMO.pnpd

  [ongoing] com.getdropbox.dropbox.83552

  [ongoing] com.google.GoogleDrive.81632

  [ongoing] com.macpaw.CleanMyMac3.Menu.80672

  [ongoing] com.mcafee.ssm.ScanManager

  [ongoing] com.mcafee.virusscan.ssm.ScanFactory

  [loading] 420 tasks Apple

  [operation] 193 tasks Apple

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

  Default browser: 601 - SDK 10.11 (2016-04-18)

  Flip4Mac WMV Plugin: 2.4.4.2 (2012-12-25) [Support]

  DYMO Safari Addin: Unknown - SDK 10.9 (2014-10-26) [Support]

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-09-16) [Support]

  QuickTime Plugin: 7.7.3 (2016-04-12)

  Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  iPhotoPhotocast: 7.0 (2010-11-15)

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  SharePointBrowserPlugin: 14.3.0 - SDK 10.6 (2013-02-09) [Support]

  SiteAdvisor: 2.0 - 10.1 SDK (2015-03-30) [Support]

  JavaAppletPlugin: Java 8 updated 77 03 (2016-04-18) check the version of build

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-30)

  Add to wishlist Amazon - Amazon.com - http://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2011-07-09)

  GoodShop - GOODSEARCH LLC - http://www.GoodSearch.com (2013-09-24)

  SiteAdvisor - McAfee - http://www.siteadvisor.com (2015-09-28)

  PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-03)

  3rd party preference panes: ⓘ

  Flash Player (2016-04-15) [Support]

  Flip4Mac WMV (2012-05-15) [Support]

  Growl (2015-09-16) [Support]

  Java (2016-04-18) [Support]

  Norton\nQuickMenu (2010-11-16) [Support]

  Trusteer Endpoint Protection (2016-04-18) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% WindowServer

  1% kernel_task

  0% fontd

  0% SymDaemon

  Top of page process of memory: ⓘ

  445 MB kernel_task

  Mdworker (18) 430 MB

  164 MB Google Reader

  Dropbox 123 MB

  VShieldScanner (4) 66 MB

  Virtual memory information: ⓘ

  106 MB free RAM

  4.15 GB used RAM (770 MB cache)

  6 MB used Swap

  Diagnostic information: ⓘ

  April 28, 2016, 22:42:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-224212_[redacted].crash

  com.etresoft.EtreCheck - /Applications/EtreCheck.app/Contents/MacOS/EtreCheck

  28 April 2016, 22:21:42 self-test - spent

  April 28, 2016, 19:49:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194912_[redacted].crash

  April 28, 2016, 19:47:10 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194710_[redacted].crash

  April 28, 2016, 19:38:58 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-193858_[redacted].crash

  April 28, 2016, 19:04:58 ~/Library/Logs/DiagnosticReports/rapportd_2016-04-28-190458_[redacted].crash

  /Library/rapport/*/rapportd.app/Contents/MacOS/rapportd

  April 28, 2016, 06:06:59 /Library/Logs/DiagnosticReports/Safari_2016-04-28-060659_[redacted].hang

  /Applications/Safari.app/Contents/MacOS/Safari

  April 28, 2016, 12:48:04 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2016-04-28-004804_[redacted].cpu _resource.diag [details]

  / System/Library/CoreServices/SubmitDiagInfo

  April 27, 2016, 22:01:10 /Library/Logs/DiagnosticReports/Safari_2016-04-27-220110_[redacted].hang

  April 27, 2016, 21:57:37 /Library/Logs/DiagnosticReports/Safari_2016-04-27-215737_[redacted].hang

  April 27, 2016, 19:05:50 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-27-190550_[redacted].crash

  April 27, 2016, 06:57:28 ~/Library/Logs/DiagnosticReports/Airmail 2_2016-04-27-065728_ .crash [deleted]

  / Applications/Airmail 2.app/Contents/MacOS/Airmail 2

  26 April 2016, 19:48:11 /Library/Logs/DiagnosticReports/Safari_2016-04-26-194811_[redacted].hang

  Remove all apps viruses you have

  Symantec, McAfee, Norton...

  CleanMyMac3