S10-3 questions of WiFi: Wireless function / antenna disabled - unable to connect to a WiFi network
I recently bought an IdeaPad S10-5 / Type 0647 / Windows 7 operating system.
I can't connect to a local wireless network at all. I can't even see all WiFi networks in my grand that I can see with my notebooks in use.
Atheros AR9285 wireless network adapter driver seems to be updated ((version dele de pilote est 8.0.0.279).)
I tried various things such as deactivation and activation of wireless networks / adapter, looking for the latest version of the driver etc without success.
I activated the WiFi to the computer (setting of the HW switch) and
Lenovo ReadyComm told me that the antenna of the wireless device is turned off. If I can't solve this problems, I'm afraid I have to return this computer. Any help is very appreciated. Thank you and best regards. Hello and welcome, Uninstall Readycomm. cordially KalvinKlein Tags: Lenovo Notebooks notifying wireless randomly says that I'm connected to the unsecured network My home network, named dlink, is WPA2 protected, but every now and then the notifier wireless appears and says that I am now connected to dlink as an unsecured connection. Why would he do that? Am I blipping somehow between a connection secure and non secure? I connect to my own router with an unsecured instance twice? Can anyone else to connect to my router without my WPA2 password? This means that my data may be temporarily unprotected? and how can I make it stop? I experience no detectable interruption in my service, with the exception of the boredom of the pop-up window and the question of what it means. There is no other wireless networks, secure or otherwise, in the range named dlink. Hello 1. don't you make changes to your router settings afer, who began to question? You can test it by introducing another device wireless (WIFI active mobile phone for example) and check if it uses your unsecured connection to connect. If you are unable to connect to the network using another wireless device you are sure that it cannot be used by others unless you share the password with them. To be on the safer side, I recommend contact you the router / ISP (Internet Service Provider) and check if it is necessary to change the configuration in the router. Windows 7 wireless connection problem: unable to connect to my home network Hello I just got a Dell laptop that is running Windows 7. However, when I try to connect to my home network it impossible apperantly. When I select "Troubleshoot Proplems" I get "Troubleshooting cannot identify the problem." I also already checked the pit of the Wireless Device Manager device. It is activated and works perfectly. I know that the network is enabled and works because I'm typing this message on my desktop wireless capable of Windows XP. In addition, my roommate is able to connect to the router and 'surf' the internet on their laptops. Therefore, I must assume that this problem is due to something in Windows 7. Hello Geoffrey. Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection: Take a look at step 6 in this article that give more details about it: http://www.Microsoft.com/athome/Setup/wirelesstips.aspx If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider. HP Photosmart B110a all-in-one: unable to connect to the home network wireless HP B110 Hello I haven't used my printer for a while, so put in a new cartridge and tries to connect to my wireless network - domestic (the printer is next to the Belkins router). I've also upgraded to Windows 10 recently (also have a laptop with W7). The printer detects the SSID for wifi and after you type the router password wireless (WPA - PSK), it is NOT authenticated. The password IS CORRECT (100%) but it fails on the section of SECURITY depending on the display and the summary diagnosis. The message of the report is: Your route wireless requires a password WPA securitg. The password configured on your HP printer does not exactly. Run the network setup wireless for re0enter your network wireless WPA security passphrase. I need this because the only way I print is wireless email / I send it to the email address designated and it prints - it is not physically connected to any laptop / pc. I tried several times, including inputtingthe SSID manually, swtiching OFF etc. Please help - thank you in advance. Best regards Disable and remove temporarily the password on your routers SSID. Now try to connect to your SSID unsecured. Are you successful? If Yes, go back and add WPA2-AES with a password and try again. Problem with wireless B USB adapter unable to connect to wireless G router. Hi, I had a LInksys Wireless - B 802 adapter. 11B with a computer Win XP and Win 7 Wireless-G Notebook, both to connect to a Linksys Wireless-G Router WRT54G2. The Win 7 Wireless - G Notebook no problem to establish the connection to the router. My 802-11b can detect the network Win XP, but cannot establish a connection witht the router. He always acquires IP and then drop out. I re - install the driver and it still the same. Originally, I had the WPA-2 personal habit, the 802. 11 b cannot acquire the same IP but you can see the USSID. After that I switched to WPA-Personal, the 802. 11 b try to acquire intellectual property, but fail to connect. Pls help. Thank you very much If the model number of B-adapter linksys WUSB11 then WPA security does not work as the WUSB11 support only WEP. Unable to connect to Wi - Fi network - 'problem with wireless adapter or access point '. When I try to connect to the network Wi - Fi Home I get error like:- Windows cannot connect. When I click on solve problems I see error below :-'problem with wireless adapter or access point '. We reinstalled OS We rested the router We are able to connect to Wi - Fi in other laptops, notebook and mobile We have updated all the drivers of network also. Please help me solve the problem. Hi Niranjan, Thank you for your support. In fact, the problem is with the Router Configuration, because with any other router device, we are able to connect to Wi - Fi in the laptop. Thank you Unable to connect to my wireless network I recently discovered that my wifi for vista would not connect to the internet even if the signal is 100% solid. My wireless House has a WEP encryption and it has already been saved on the laptop but since yesterday it ask me the WEP key when I try to connect it and wouldn't connect even if only the WEP pass has been entered correctly. The message that usually appears at the end is "windows is unable to connect, try the other network", even when I tried my companion's unsecured network. Here's what I did so far, but without success... I checked the Wireless driver from Device Manager and it works properly. I even try to update the driver and received a message that the driver is 2-update. Here's what I got when I tried to use "ipconfig/all". Name of the host...: AZOU Wireless network connection Wireless LAN adapter: State of the media...: Media disconnected Ethernet connection to the Local network card: The connection-specific DNS suffix. : Belkin Card tunnel Local Area Connection * 6: State of the media...: Media disconnected I can use the Ethernet cable to connect and this is killing me lol seriously... can anyone pls help me, I want to get this working wireless! Thank you Hello! What computer Toshiba laptop and OS do you have? In your case, I would check the Web from Toshiba site for an update of the BIOS: Have you tried to reset the router? Unplug the AC adapter from the router, wait 5 or 10 minutes and then try again. Good bye Automatically by turning and the wifi network? Is it possible to create a guest wifi network that automatically turns on market every day at certain times? Sorry, but no. However, there is a way to control the hours of each day that a wireless device would be authorized to connect to the Guest network. For example, an iPad has to connect... Every day... Between... 08:00 and 22:00. the iPad is not able to connect to any other time. Unable to connect to network WPA2-Enterprise with Broadcom BCM4352HMB 802.11ac WiFi 2 x 2 HP Envy 15 t-J100 using BCM4352HMB 802.11ac 2 x 2 WiFi driver version 6.30.223.221 on Windows 8.1 Pro 64-bit. I get an error trying to connect to my network wireless to work with "Unable to connect to this network." using WPA2-Enterprise authentication. The network appears in the list of available networks and the guests for my credentials (username & password), then it attempts to connect to it. A co-worker next to me has no problem with Win8.1, but has a 802.11n chipset (non - ac). I connect very well to my home network (802.11n) using the WEP protocols. I saw a post that might be one that this driver tries initially to connect with the COMPUTER instead of the USER name? He suggested demotion to a Win7 64 bit, but I'm not find driver that I am willing to try. In the network configuration (802.1 x settings), I set myself to SPECIFY the MODE of AUTHENTICATION = "User authentication" without success. Solved the problem by installing the version of the driver 6.30.223.9 Win7-specific (sp64737). I can now connect to WPA2-Enterprise through Cisco Access Points. Driver is here: Solution found in this post: Unable to connect to home wifi on windows 8 on dell inspiron1525 On my Dell inspiron 1525, I updated to windows 8 but could not connect to a Wifi hotspot that is specific to my home which I already use wifi for my smartphone and the tablet. Find me a solution because troubleshooting is not fixated. On my Dell inspiron 1525, I updated to windows 8 but could not connect to a Wifi hotspot that is specific to my home which I already use wifi for my smartphone and the tablet. Find me a solution because troubleshooting is not fixated. If you are unable to connect to a running network, you might have a problem with your network profile the network profile troublesome Deleter and read... How to remove Connection Wi - Fi with internet explorer 8 I'm under Boot Camp on my iMac with OS 10.6.8. I am connected to the hub of my son-in-law over a wireless connection. I can access the internet using Safari on the side of the Mac of the partition successfully, but I can't access the internet by using a wireless setup on the side of the PC of the partition by using Internet Explorer 8. I get a message saying my side PC created by Boot Camp can not find the wireless hub and is unable to connect to internet Explorer. Help! Hello · What is the version of the operating system running on your computer? I suggest you to install the drivers for the network card on the manufacturer's Web site and check if it helps. http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible? If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac. As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired. At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it. We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it. Unable to see a wifi network with Atheros 5005 g wireless network card Hi, new to this. I tried Hnatyshyn best part of a month for my Equium M50 PSM59E to see a wifi network that broadcasts on 13(unlucky for some) channel. I can't screen authetication for network WPA - PSK on the wireless network settings. The wireless network card is the Atheros 5005 G with the latest version of the driver downloaded from Toshiba and KB893357 Knowledge Base. The network is visible in this computer with a plug in DLink DWLG650 +, how the Atheros to work? Hello are the two of you using Configfree? And the most interesting thing would be: what system are you using? Otherwise I can give you a link to another thread where you can probably find a few info´s on the configuration of wireless network: http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26088&MessageID=95706𗗚 I suggest all of you to google around a bit. Most of the questions are either here in the forum in the section wireless or on some Internet sites that can be found with the help of google. Cheeers Belkins wireless adapter recognizes not all wifi networks I have a Belkins wireless adapter for my pc and try to connect to a wireless network. My adapter recognizes not all wifi networks and I know that there is on the functioning of the House. How can I fix it? Laptop? If you know that there is a wireless network in your home because the other computers are connected to him, the most likely cause is that the wireless adapter is disabled (a physical switch or a combination of keys Fn + Fkey). For additional help, please indicate the make and model of your computer (and your wireless adapter, if it is not integrated), as well as the version of Windows you have, including the service pack. Samsung wireless surround does not work with Airport wifi network I have a smart tv with a Soundbar and wireless - all Samsung two speakers. I should be able to set up surround sound via the network wireless like this http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx= 629802 & modelname = WAM7500 & modelcode = WAM7500/ZA It works fine when it connects to the router provided by my ISP sky. But when I try to do the same when connecting to the network created by the airport, it won't work no-more precisely, I'm unable to select "link Multiroom' (step 19 in the link above). Note: There is no problem connecting to the wifi network - it's this last step which is the issue. Any ideas as to why this may be the case? I need to use the extended network of the Hub of sky wifi is very low when the TV is. Here is the configuration... Router-> Airport Extreme-> Airport Express-> TV + Surround Sound (Airport extreme is the bridge mode value and the expansion of the wifi network Express). Thank you Jeremy TV: Samsung UE40H6400 Soundbar: Samsung HW-K650 Rear speakers on your TV: Samsung R1 2 I'm not familiar with Samsung wireless speakers, but let me see if I can help. What is the brand and model of your router provided by Sky? You have configured to provide a Wi - Fi network? Is the Wi - Fi network, provided by the extreme and extended by the Express, a second wireless network with a different SSID or using the same SSID as provided by the router from the sky? Error message, wrong paper HP Officejet 6500 a format more CN557A Recently, when I try to print, I get "incorrect paper size", changed the setting back from portrait to landscape and back and after several tires, as it will print. Sometimes, even if it's the landscape be pring in portrait! I am using Windows 7 Home I get nothing but a black screen when I turn on my HP laptop. I think it's because of static electricity. Opdatering therefore "Win.exe" ikke efter Word therefore ikke dokumenter. Istedet for pil eller markor, roterer en cirkel hele tiden. Change the name of the folder "User". I changed my account from Xyz to Abc name, but who has not automatically changed the name of the C:\Users\Xyz to C:\Users\Abc. Then I spotted responses in the latest discussions in this forum and a suggestion created a new user account called 'for no Cannot open the Jcreator 4.5 after installing Original title: jcreator 4.5 I installed jcreator pro 4.5 properly but it does not open.I double clicked on it several times, but does not open.I tried to change the compatibility, but it did not work.I've looked everywhere but I did not help. PleaseSimilar Questions
..................................................
Windows IP configuration
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.
... DNS suffix search list: Belkin
The connection-specific DNS suffix. :
Description...: Realtek RTL8187B Wireless 802. 11b / g 54Mbp
s USB 2.0 network adapter
Physical address.... : 00-22-5F-36-AE-19
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Description...: Realtek RTL8102E Family PCI - E Fast Ethern
and NIC (NDIS 6.0)
Physical address.... : 00-1E-33-7A-3C-AE
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::1ad:202c:5412:8070% 10 (Preferred)
IPv4 address...: 192.168.2.35 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: May 2, 2009 19:58:15
End of the lease...: June 9, 2145 03:09:10
... Default gateway. : 192.168.2.1.
DHCP server...: 192.168.2.1.
DNS servers...: 192.168.2.1.
194.168.4.100
194.168.8.100
NetBIOS over TCP/IP...: enabled
The connection-specific DNS suffix. : Belkin
... Description: isatap. Belkin
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
Another laptop works on the router?
It was long and I was tired of trying everything... that I connected to another wifi also and used very well... but not a connect to the home.
It was long and I was tired of trying everything... that I connected to another wifi also and used very well... but not a connect to the home.
http://www.eightforums.com/tutorials/20085-wireless-network-profile-delete-Windows-8-a.html
Soon AlexMaybe you are looking for