S10 - where additional software must be installed? "C" or "D" drive... ?

Similar Questions

• HP Envy 15-k086ng: what drivers & software MUST be installed for optimum performance on Win10?

  This is the list I found:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-K000-notebook-PC/6936206/model/7146286#Z7...

  Some of these drivers have not been approved by HP Support Assistant, so it would be great if you could tell me what I simply to install.

  Also, are there that I better do not install because they are known to be buggy on my model of envy? Not at all?

  Thank you

  ####

  10 64-bit Windows Home

  Intel Core i7-4510U @2. 00 Ghz

  BIOS: F.34

  228D 77.35

  NVIDIA Geforce GTX 850M (10.18.13.5362)

  Hello @Mizuu,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I understand that you are a problem to install the drivers and that he wanted to help you!  I see that you are curious to know what drivers need to be installed.

  As long as your HP Support Assistant, and/or updates to Windows are running, you will receive critical updates driver through these programs.  It is generally recommended to make sure that all your drivers are up-to-date.  However, if you not currently have problems, you should be well let the Windows update run, to install the updated driver.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Where vCenter Server must be installed?

  Hello

  VCenter Server needs to be installed? On-site at our data center, and also an instance at our office, or is it just one instance per company? < / make >

  Hello.

  In general, there will be an instance of vCenter installed "side" the ESX host, it manages.  You can then use the client vSphere from anywhere on the network to interact with the vCenter.  There could be a vCenter and then several customers vSphere used from multiple locations to manage.

  Where are your ESX servers located?

  Are you looking for vCenter redundancy, or something else?

  Good luck!

• Additional files must be installed to create PDFS from this file (Excel). You must have administrator privileges to install these files

  Get this message when the combination of files - exhausted Adobe help - they couldn't fix it! Adobe Pro and Windows Pro 10 Dc. Someone smart enough to find a solution?

  Contact developer confirmed that it is a trivial problem. Adobe Bug #4134024 - no patch available for "about one month".

• I don't know where to look or how install\download an audio driver for my dell latitude d410

  I managed to delete my laptop sound driver! This is not the first time that this happens, but I don't know how to fix it! I was going thru deletion of files, I thought I is no longer necessary, and I have uninstalled or deleted audio driver who had worked up until I was eating with her...

  All you need to do is go to this page:

  http://support.Dell.com/

  Click on the button 'Start Here' far left "Support for private users." Keep drilling down until find you it.

  Here's my concern, however. "Go to" and delete files from the way you have (without realizing what you do counts) can lead to instability. You may have done more damage than you think.

  Here's my advice:

  1 backup all your data if you have not yet done. I recommend backing up data to an external hard drive.

  2. perform the Windows XP system restore:

  http://support.Microsoft.com/kb/306084

  Who will probably return all your system files to their correct location without having to go hunting for replacement drivers, etc..

  If you need advice, let us know. There are some security programs that interfere with the restoration of the system, for example. In addition, if you want to know how to safely remove debris, we can help you with that, too.

• create dvd Windows says that a compatible mpeg-2 video software for encoding must be installed

  Windows dvd maker and mpeg-2 Please help

  Why when I click on create dvd windows, it says compatible mpeg-2 video encoding software must be installed on your computer, sorry for typos

  OK, after searching on Google, the problem looks like a lot of people have the same problem but no answers I hope that someone here will

  Hello DeeSmuv & regjng,

  Thank you for your response back!

  How long have you not been able to access Windows DVD maker?  I suggest you visit the link below and following the steps to see if this solves the problem.  Have you ever been able to use Windows DVD Maker without any problems in the past?  Have you tried to do a system restore if it already worked?

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista
  http://support.Microsoft.com/kb/306331

  The tool using System Restore may not necessarily help you determine the problem. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Where Microsoft's products are installed on the laptop?

  Hello. I bought my computer (laptop Gateway) from Best Buy. I have the download product key: microsoft work 8.5; Money 2006; Encarta and image digital starter for windows Vista. where is this software? Thank you very much. Tony

  Let me elaborate a bit on your question.

  You run Microsoft Works, MS Money and another program, you need to install normally leave the DVD or a program file that you download from a source of retail on the internet. Windows Vista is just the operating system, you will need to reinstall any other software. If additional software came pre-installed on your system, then it was delivered on your computer by a 3rd party, bridge, or Best Buy.

  I don't know if you have a product key for your operating system or other software products.

  If you need to reinstall your operating system, Windows Vista, you must have a recovery partition on your computer or the software DVD available. Otherwise, you will need to contact Best Buy or gateway for these products.

  Sincerely,

  Marilyn

• Satellite P500 - 01 G-install the Toshiba software after clean install

  Hi all

  I have a Toshiba P500 - 01 G (http://www.mytoshiba.com.au/products/computers/satellite/p500/pspgsa-01g003/overview) running the grouped Windows 7 Home Premium 64-bit. I bought an upgrade to Windows 7 Ultimate, but can not use it, he just tells me to use Windows Anytime Upgrade.

  However, I can use it for a clean install and I intend, but I don't know what to do on the Toshiba Software (http://www.mytoshiba.com.au/support/computers/satellite/p500/pspgsa-01g003/download?os=25).
  I read on another thread that the software must be installed in a certain order and frankly I have no idea! I don't want to break something! I'm not to ask for the list accurate for each of them (except if you have time) but just a general guide as to what I should install in the order.

  Also, I guess that my recovery partition is erased in the process and I can't get it back. Is this true?

  Thank you very much. I really appreciate it,
  Abraham.

  Hello, Abraham

  I m the Satellite P500 owner too and it's really great machine, isn t it? I like it. My Toshiba best ever.
  My machine is preinstalled original Toshiba recovery image and it works without any problems so I put t want to change anything.

  Back to your question. I assume that you have a few reasons why you want to use the Ultimate version then you should try to clean OS install. Before you anything create recovery DVDs. Make two copies.
  After that make what you can do with your laptop all you used to because if you want to have the factory settings, again you can use created the recovery disc and install original recovery image.
  After recovery of registered OS image will help and you will not be able to start the installation of HARD drive recovery then please create restore DVD.

  Installing Win7? I have the European model, and I will send exact installation order list. There may be small differences compared to the model of the AU, but the principle remains the same.
  Here we go:
  Windows 7
  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Turbo Boost Technology driver
  Intel Rapid Storage Technology driver
  TOSHIBA supervisor password utility
  TOSHIBA HW utility
  TOSHIBA Value Added Package
  O2 card reader controller
  NVIDIA driver HD Audio
  Conexant Audio driver
  Wireless LAN driver
  Synaptics Touch Pad Driver
  TOSHIBA HDD Protection
  Bluetooth Stack for Windows by Toshiba
  LAN driver
  Winbond CIR driver
  YUAN pilot DVB-T/ATSC Tuner
  Sleep USB TOSHIBA and service charges
  TOSHIBA face recognition
  TOSHIBA eco Utility
  TOSHIBA HDD/SSD Alert
  TOSHIBA Service Station
  HDMI Control Manager
  TOSHIBA Remote Control Manager
  TOSHIBA fingerprint utility
  PatchFiles FixFPService_REG_1.0
  ConfigFree
  TOSHIBA Assist
  TOSHIBA Web Camera Application
  TOSHIBA Extended Tiles for Windows Mobility Center
  TOSHIBA Network Device ID registry tool
  PatchFiles PCIIDEREG - 1.1

  I hope this will help you.

  Good luck and if you have any other questions please let us know.

• HP all-in-one printer install software "think" the software is already installed - it is not.

  I have a printer all-in-one HP Photosmart C8180, connected via USB directly to my Windows 7 system.  Over time I installed, updated and uninstalled the software.  At the present time, when I try to install the software is properly run, it did not install the software.  If I click on "Advanced" installation option, I see that it "thinks" most of the support software is 'already installed' and it won't install it.  I tried to uninstall, but it will not uninstall it (because it is not installed).

  

  I can print fine, I can get the driver installed, but I would like for all supported software must be installed also.

  How can I get the installation package to acknowledge that the software is not "already installed".

  Hello

  Open the content of the CD, run the Uninstall L3. at the bottom of the path...
  CD > Util > CCC > uninstall L3.bat

  Once it is completed, and then restart the PC and reinstall the S/w.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• HP Pavillion Slimline: Where to order discs re - install

  I can't seem to find where to order discs re - install. My HARD drive crashed and I never created the recovery media, I know stupid tax, but given that the machine is out of warranty HP is not very willing to help.

  Any suggestions?

  I thank.

  To order a recovery disc for your computer

  If you live in the USA/Canada, call this number...  1-800-334-5144.

  If you do not live in the USA/Canada, call the support number HP business PC for the country where you live.

  http://h50146.www5.HP.com/lib/doc/manual/desktop/b usiness_desktops/6005us_332630_007.pdf

• Error Microsoft Life Cam "a later version of the Webcam Live software is already installed, to reinstall the life CAM software, you must first uninstall the CAM of your computer software."

  Dear Mircosoft
  I just bought the Microsoft Live Cam VX-2000.  You are able to help.
  I followed the installation, then at the end when the picture came on the screen an error message came on the screen: "a later version of the Webcam Live software is already installed, to reinstall the Webcam Live software, you must first uninstall the software of Webcam Live from your computer."
  I'm not very user-friendly computer.
  I get a green flashing on the camera.
  I can't use it in Skype.
  Thank you
  JO Smith

  Hi josmith416342,

  ·         You have installed all software associated with the device?

  ·         Do you have any device life Cam earlier?

  Check to see if the following is useful.

  Method 1: Check list of programs for the device relating to the software. Uninstall the same and try to reinstall the software.

  How to change or remove a program in Windows XP

  Method 2: You can follow the steps in the following article and see if it helps. The error mentioned in the article is different, but this can be tried.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

• How can I transfer doc scanned my pc? Do I need additional software to do this and where can I find it?

  How can I transfer doc scanned my pc? Do I need additional software to do this and where can I find it?

  Hello

  This should help you:

  "Scanning: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows/scanning-FAQ#1TC=Windows-7

  See you soon.

• 11.1.2.1 EMP can be installed on the same server where 9.3.1 is installed?

  11.1.2.1 EMP can be installed on the same server where 9.3.1 is installed?

  You will always use the 9.3.1 existing environment alongside 11.1.2.1? If Yes, according to 11.1.2.1 documentation, if you want to keep your previous version environment, you must install a
  new machine and you need to replicate data. Previous installation may not work if it is installed on the same computer.

  You install and configure the software version 11.1.2.1 in a new location and move applications and data to the new environment of deployment.

  (1) install the EPM system on a new machine or machines. You can reuse the data and the existing database, or replicate the database and data to a new machine.
  If you migrate to a new machine, you must upgrade to a platform of the same type.

  For example, if the previous version was on a Windows machine, you must upgrade to a Windows machine. If the previous version was on a Linux machine, you must upgrade one
  Linux machine.

  (2) install the EPM system on the machine or machines (Oracle recommends that you install in a new installation location). You can reuse the data and the existing database, or replicate the database and data to a new machine.

  What is written on page 174 of the EPM 11.1.2.1 Setup Guide (http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_11121.pdf)

  I hope this helps.

• Portege R930 - 14 X and additional software

  Hello

  I recently acquired a Toshiba Portege R930 - 14 X, a friend. It is running Windows Pro 8.1, it came with any disks etc. It does not seem to have any of the supplied software, he would come with out of the box. Please excuse that my ignorance, but is there anyway I can restore it or download it please.

  Thank you very much

  Hello

  According to the specifications of the laptop this model of laptop computer came with preinstalled WIN7 64 bit PRO & WIN8 64 bit PRO DVD.
  http://www.Toshiba.co.UK/discontinue...Tege-r930-14x/

  I don't know what version of the OS is installed now, I mean is it original with update or install own Win8.1 Win8 but all drivers necessary, tools and utilities, you can download from Toshiba support and download page - http://www.toshiba.eu/innovation/dow...ivers_bios.jsp

  Additional software is included in the recovery image only.

  If you have any other questions please be free to ask.

• Portege R700 PT311A - network adapter must be installed

  My Toshiba Portégé R700 (PT311A - 06600Q) does not connect to the internet.
  It is said that a network adapter must be installed and configured, but I don't have the drive to do this, nor do I have an internet connection on my laptop to download the driver.

  I tried to download the driver on a USB key, using another laptop, then using the USB, I tried to install it on the computer problem, but it will not be installed.

  There is that some windows not installed on computer problem, maybe it's a question of why the driver doesn't install?

  Help me, please!

  Hello

  I hope you've picked up the right driver.

  Not sure if you talk about driver LAN or WLan driver and what Windows system you use but the fact is that all of the drivers for this unit can be found here:
  http://www.MyToshiba.com.au/support/download

  I recommend you to check once more, if you have downloaded the correct driver. Then move the driver package to the (desktop). Unzip the package and run Setup or install the exe file.

  In the case where you would find all the exe files in the package, I recommend you to install the driver in Device Manager.