S10e no video when the DIMM is added

Similar Questions

• Microsoft Lifecam VX-2000 shows black video when the software is installed

  Original title: Microsoft Lifecam VX-2000

  I just bought and followed the installation instructions to install and operate the lifecam vx-2000.

  I tried first to find this product on the support webpage itself, but it has not been listed with the other lifecams. I have no idea why, because he is supposed to be a site of support for their products...

  My computer meets the requirements for the software.

  However, after the installation, I opened the microsoft lifecam software, the program screen is black.

  There is no error message. Just a black screen.

  I uninstalled the program and tried to connect the webcam without software and when I opened it upward through Skype video settings to see if she would recognize the camera - he did.

  So I'm a bit puzzled as to why the software will not work with the camera.

  Thus, once the software is loaded on the computer, the video from the camera stops working, until the program is removed once more my computer.

  A little disappointed and do not know how to solve this problem.

  Any suggestions or methods to solve this problem will be appreciated.

  Hello, Annick,.

  You mentioned first validation that you were unable to find the XP driver, is this always the case?

  Win XP driver is available here: http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=ICE&type=LifeCam&name=YFC-00001&os=XPSP2x64&lang=en

  Follow the same instructions above.

  Before installing LifeCam driver make sure that you have at least Windows XP Service Pack 2. You can download service packs using these links:

  Service pack 2: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=049c9dbe-3b8e-4f30-8245-9e368d3cdb5a

  Service pack 3: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5b33b5a8-5e76-401f-be08-1e1555d4f3d4&displaylang=en

  Activate the automatic update in the control panel: the parameters of control of configuration\systeme and Maintenance\Windows Update\Change

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer

• Remote PC stops responding when the lines are added to a multiline textbox

  Hello

  When connected two RDP connections and multiline textbox is visible and always up-to-date (e.g. time real record on the screen), then all other processes and threads are suspended on the remote PC. For example, the task manage does not refresh, the clock stops, if you have a few applications running on this PC Server/services so their customers will get the writing/connect timeout errors, etc.

  to reproduce this problem:

  1. create a test application simulating recording in real time on the screen. For example, create a new GUI application (for example, in visual basic, delphi, etc.), several (for example six) textbox, control and set multiline = true (or use TMemo components in delphi), add the button and code to add rows in a loop (for example 200 iterations) these textbox/TMemo controls (see the sample code below). Build the executable

  2. have three PC of loan. The first connect to second via RDP and from there linking to third parties via a second RDP connection. Third PC start test application, that you created in step 1. While the lines are added to the multiline/TMemo text box, try to do something with this PC, for example open the Task Manager, check how it is refreshing, open clock and note how seconds are proliferating, try to connect to some services from another PC (shared disk for example, ftp, web, etc.) and see how to answer they are

  Windows 2000 seems to be ok, xp, 7, Server 2003/2008 have some problems

  is there something that we could do to make the third-party application with real-time logging to the multiline/TMemo text box does not slow down or suspend our services that are running on the same PC, when someone connect via RDP? also, it would be great if microsoft could fix this problem

  example code:

  For i As Integer = 1 to 200
  Dim s As String = «»
  J As Integer = 1 to 10
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox1.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 10
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox2.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 10
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox3.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 20
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox4.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 20
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox5.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 20
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox6.AppendText (s & Chr (13) & 10)
  Next I

  var
  i: Integer;
  s:string;
  Start
  for i: = 1 to 200 start
  s:='';
  While length<20 do="" s:="s+intToStr(i)+'">
  glMemo1.Lines.Add (s);

  While length<40 do="" s:="s+intToStr(i)+'">
  glMemo2.Lines.Add (s);

  While length<60 do="" s:="s+intToStr(i)+'">
  glMemo3.Lines.Add (s);

  While length<80 do="" s:="s+intToStr(i)+'">
  glMemo4.Lines.Add (s);

  While length<100 do="" s:="s+intToStr(i)+'">
  glMemo5.Lines.Add (s);

  While length<200 do="" s:="s+intToStr(i)+'">
  glMemo6.Lines.Add (s);
  end;

  Thank you
  Paulius

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  you might do better at the forum above. Good luck. :)

• Lost the video when the transition from XP to Windows 7

  After the Upgrade from Windows XP to Windows 7, I lost the video.  Upgrade is not completely finished, but I can't do anything to fix the problem I have no display.  I need to go back to XP or difficulty somehow the video from the command prompt.  What can I do?

  How to uninstall Windows 7:
  http://support.Microsoft.com/kb/971762

  How to uninstall Windows 7 by using the Windows.old folder:
  http://support.Microsoft.com/kb/971760

• Sound, but no video when the stream of a file quicktime by shock wave

  When I listen to a quicktime movie into the html file hosted on localhost using the Apache Server, I hear, but no video. I saved the film quicktime as part of my casting, linked to http://localhost/~username/mymovie.mov

  When I play the movie quicktime itself in my browser, or in a projector or just on a Director, the video and audio play simultaneously. But in the browser after you convert the film to dir to html and dcr file and by hosting files dcr and html on the server, when I open the html file in my browser, only the sound pieces. Anyone have similar problems? Any help would be appreciated!

  Hi guys,.

  Here are a few quick notes on how to handle shockwave videos with my projects.

  I tend to find that video in .swf format work better under all browsers using shockwave

  easiest way:

  You can make one lump in importing a .swf video directly in your casting. (without link)

  the problem with this is that it tends to create a large dcr file for your users to download

  "preloadnetthing" way:

  Download your videos on a site url - something like www.mywebsite.com/the_programs_title/dsmedia/videos/video1.swf

  (I never use capital letters or spaces)

  file - import - internet-

  This will add the file to the list add

  media value: link to the external file (do not use block import)

  Now press import

  When this Director will try to connect to your url - and downloadable the linked file test

  If it works you should now see a new Member related video casting added to your casting

  If it fails (which mine tend to make half the time?) - try it once again until it works.

  Here I normally find property of the related videos Inspector - and change its settings - I disables loop - and of course be sure preload is not defined.

  Now comes the part of code

  To get your videos to play properly, you will need to preload them in memory, before playing them.

  (although it is possible to videos - I have never been able to get it works well - there is a whole bunch of code lingo to treat streaming videos)

  a script for a video preload swf frame *.

  on beginSprite

  floatPrecision = 2

  tellStreamStatus (TRUE)

  global gVideosName

  the value TEMP "http://www.mywebsite.com/my_program/dswmedia/videos/" & gVideosName & ".swf".

  global mynetID

  Set mynetID = preloadNetThing (TEMP)

  Set the text of the cast of "preload_results" to "0%".

  end beginSprite

  on exitFrame

  floatPrecision = 2

  global mynetID

  pStatList = getStreamStatus (mynetID)

  If (pStatList.bytesSoFar > 0) then

  pPercentDone = (pStatList.bytesSoFar * 100) / pStatList.bytesTotal

  If pPercentDone > 99 then go THEN

  end if

  Set the cast text 'preload_results' ((la chaîne de pPercentDone) & '%"))

  go to loop

  end exitFrame

  a script in frame for playback of a swf video *.

  on beginSprite

  -I create a blank "placeholder" cast member (a black filled rectangle) the same size as my video, my staging - in sprite 1

  Set the visible of sprite 1

  the puppet of sprite 1 set to TRUE

  Global gVideosName - REM the name of my bound member video casting

  the value of the castNum of the sprite 1 cast gVideoName

  updateStage

  Sprite (1). Play()

  updateStage

  end beginSprite

  on mouseDown

  Sprite (1). Stop () - This stops playback of SWF movie!

  end mouseDown

  on keyDown

  Sprite (1). Stop () - This stops playback of SWF movie!

  end keyDown

  on exitFrame

  If .playing sprite (1) = false then

  Set to false to the puppet of the sprite 1

  go to "somewhere" - REM somewhere, you want to go after finishing the video.

  abandon.

  end if

  go to loop

  end exitFrame

• Satellite L750 - green color video when the power is turned off

  I bought the Toshiba Satellite L750 and when I cut the power... I have problems with video card
  I see all the videos green why?

  Sorry for my English because I of the Italy

  Test several times. If this will happen again and again, I recommend you bring the laptop and ask for replacement.

  Something like that shouldn't happen.

• Assign to users when the SSID is added to the AP group

  I just created a group of AP for the first time on my controller 4402.  When I went to add a SSID for the group, it is said that it will disable the WLAN.  Does this mean that all users on that SSID will be disconnected?  How long the loss of connectivity would generally last?

  Kevin,

  The wireless for a SSID will be glitch if you make a change to this WIFI, only not by adding it to a group of AP, unless you delete it.

  Thank you

  Scott

  Help others using the system of rating and marking answers questions like "answered."

• AMD week W8100: First 2015.2 black CC video when the Mercury engine enabled with support for 10-bit active

  Just see black video windows in first CC 2015.2 with 10-bit turned on via driver AMD W8100. Videos showing normal with 10 - bit turned in the AMD driver or when Mercury Playback is put on the software reading.

  Tested with or without transmit mercury. Photoshop thin ist in 10-bit, only first gives me headaches when 10-bit is enabled via the driver.

  When I disable 10-bit driver AMD via, first normally videos watch. The drivers updated, computer is new.

  My system:

  CPU: i7-5930 K

  RAM: 64 GB

  GPU: AMD over-pants W8100 (pilot: v15.301.2601)-Beta (v16.5.2) driver does not work with the first CC 2015.2 in 10-bit

  Motherboard: Asus X 99 - Pro (latest drivers chipset)

  OS: Windows Pro 10

  Two follow Setup: HP LP2465 + HP Dreamcolor Z27x (10-bit)

  Any advice to make it operate highly appreciated, file a bug now, too.

  Jacob, I dropped the W8100 AMD to Nvidia Quadro M4000 wich works are flawless, cheaper, faster and 10-bit output for my HP Dreamcolor works perfectly.

  See you soon,.

  Patrick.

• problem with adf table when the component is added in the column of the table.

  Hi all
  
  I use jdev 11.1.1.5.0 version.
  
  use case: I created an adf table that is based on the original Version. DC now I added a component of group select a radio (which contain 4 approved, rejected, radio button back, no) in the table of the adf.
  I have table with many rows for example in the first row select approved and the next row I select reject now when I get the value of a radio button group in backing bean by using the component binding I had the last selected value. (in this case to reject).
  
  And the second is that when I set the value for the current by using binding as line radio button
  
  rb.setValue("R") then reject option selected for all lines.
  
  so my question is--
  
  How can I get and set the value of the group to select a radio at the level of the line using the element binding.

  Hello

  I don't see a reason to not use a transitional attribute for the radioGroup in your previous answer.

  Here's the example I tried.

  Where DeptnoRadio is the transitional attribute, I created (which will be a few random values between A and E) and EnableDisable is another temporary variable of type Boolean that returns true or false depending on certain conditions.

  Now, for each row, the value is different (and the corresponding radio button is selected) and thereafter, which match the condition, the option is disabled.

  Arun-

• Live Movie Maker: why the sound does a video when the video is on an effect of speed? If someone can solve it?

  When I set the speed of the effect on my film I can't hear the sound of the film. Someone help me please to solve it im trying to get a voice Chipmunk or fred, thank you

  Hi CaraPeters,

  If the problem occurs only in Windows Live Movie Maker, and then you can see the following link for Windows Live contact for further assistance:

  http://www.windowslivehelp.com/searchresults.aspx?query=no%20sound%20when%20The%20video%20is%20on%20A%20speed%20effect&ProductID=5

  http://www.windowslivehelp.com/product.aspx?ProductID=5

  Hope this information is useful.

• GroupDataModel is not sorting when the data are added to Json

  If I have an empty Json and I add data to him one by one, everything works just fine, but when I have a data in Json it sort. Let's say that this is my json:

  [
     {
        "DateCreated" : 1383137332,
        "DateToFinish" : "1383137400",
        "Description" : "Task 3",
        "Status" : "1",
        "taskId" : "3"
     },
     {
        "DateCreated" : 1383137327,
        "DateToFinish" : "1383137400",
        "Description" : "Task 2",
        "Status" : "1",
        "taskId" : "2"
     },
     {
        "DateCreated" : 1383137321,
        "DateToFinish" : "1383137400",
        "Description" : "Task 1",
        "Status" : "1",
        "taskId" : "1"
     }
  ]
  

  sortingKey is set for "taskId" and sortedAscending is set to false "(false) setSortedAscending" but in the ListView, it indicates in order as 'Task1, Task2, Task3' growing. I filled out model json with:

   QVariant list = jda->load(QDir::currentPath() +
                               "/app/native/assets/test.json");
  
      this->insertList(list.value());
  

  In addition, after I have load and insert json to the model, when I try to add a new model element, it adds properly in its place. He would add "task4' with the id" taskId: 2 "at the top of the JSON...»

  EDIT: "jda" is ' bb::data :: JsonDataAccess'

  Put 'setSortedAscending (false)' after insertion has solved, but I'll leave this open for explanation.

• You can control when the styles are added on your style sheet?

  I would like to have css files organized in a certain way for the ease of use and DW sometimes join the end and sometimes add to the middle.

  It is quite easy to organize styles in CSS designer. There are several aspects:

  • When a selector is already selected in the pane of selectors, by clicking on the button "+" to create a new selector inserts the new rule of style immediately after the selected one.
  • If you want to move the selectors in your stylesheet, you can drag and drop them in the Panel of selectors. The style rules will be moved to the new location in the style sheet.
  • You can even move a different style sheet style rules. Select the styles that you want to move and begin to drag. Keep the mouse button while dragging on the @Media pane and then drag the style selected on the stylesheet to target in the Sources pane.
  • To adapt a style rule existing for use in a media query, right click on the selector and choose duplicate in the query on the shortcut menu. You can then select the media query in the submenu that appears.

• My dv9700 use for video when the graphics card is disabled?

  Hello!

  I've had my dv9700 for about four or five years now. A few months back I started getting blue screens with an error code of nvidia. Turned my video card went out due to overheating, so I sent it have fixed output card (reflow). It lasted me until now, but the card is finally out again. I would try to start each time, I would get the error screen and blue nvidia even code (again, it is a hardware problem is not a problem of driver/software). However, I was always able to access safe mode, then I disabled my NVIDIA GeForce 8600 M GS display adapter through the Device Manager and now I can start normally.

  So my main question is, what is my laptop using for video now that the graphics card is disabled? I noticed something called 'vgasave', but I don't know if that is related. Also, someone said that my processor could limit the video feature (?).

  Second, what is the extent to which I can use this new video? I noticed that some programs do not run. In particular, I can no longer connect to my TV via HDMI. Is there a way to get around this?

  Sorry for the long post and thank you in advance!

  Axel

  AxelFen wrote:

  My laptop has the Northbridge: Intel PM965. Do you know of anyway to increase this functionality (IE allow a HDMI connection)? I know that at this stage I should just get a new computer, but it would be nice to be able to resign from the attached web enabled TV. Maybe I could use the external monitor (VGA) port, since it is analog rather than digital?

  Thank you very much for your help!

  The pleasure is mine!

  You're stuck with the video produced by the MCP67N. You can replace the video module. They should be available for a decent price on eBay. VGA is analog. You will find a disappointment.

• Status of the indicator in the catalog is not preserved when the photo is added to the collection

  Here's my workflow

  1 import photos

  2. click on «All the Photos»

  3. in library mode, examine each photo. For each, I press X to reject, for the flag, or to not do.

  4. always in "All Photos," I select groups of photos to create Collections, for example, 'Beach 2010-11 journey.' I understand not all photos of beach trip: those which are marked with a flag, those that are marked to reject, and those who are not marked not anyway.

  And here is my problem

  When I go to the newly created collection, no pictures are marked with white or black flag. All photos are present, but none have kept the status of the indicator. If I return to display 'All the Photos', the flags are still there, but they are not visible in the collection.

  I do not create virtual copies during collections.

  I use LR 3.2 on OS X 10.6.5.

  Any help is appreciated!

  This is the way Lightroom works... has always. Flag State is local to the folder or the collection in which it is defined. It shows that in this collection or folder. In fact, you might have the same photo in a collection and rejected in another and neither in the photo folder.

  HAL

• RefNum of event recording stops when the new event added

  I use dynamic registration of events to manage my user interface events in an another VI.  Whenever I have add a new event, the event registration refnum breaks and me have to recursively go through the code and replace all occurrences.  Is there a method of transmitting refnums record event so that it does not happen?  It should be a strict type def?

  Right-click on the wire on the record node, select Create indicator.

  On the Panel before, do a right-click on the reference control, select-> Advanced-> customize. A control editor will appear, select in the top bar on the ring 'Typedef' instead of 'Control '. Register the control.

  Now, in each VI, you use the reference, you need to replace the control. Check the Help window for each wire if it is bound to the control typedef.

  Now, to see if it worked, change your registration, everything must be interrupted.

  Create a control (of new ref) and replace the old typedef control (.ctl file) with new reference control. Automagically everything should be updated and working again.

  Tone